From 512536a54a1a211a9f582e76cbf12850dc7d5466 Mon Sep 17 00:00:00 2001 From: Doug Zongker Date: Wed, 17 Feb 2010 16:11:44 -0800 Subject: relocate applypatch; add type system and new functions to edify - Move applypatch to this package (from build). - Add a rudimentary type system to edify: instead of just returning a char*, functions now return a Value*, which is a struct that can carry different types of value (currently just STRING and BLOB). Convert all functions to this new scheme. - Change the one-argument form of package_extract_file to return a Value of the new BLOB type. - Add read_file() to load a local file and return a blob, and sha1_check() to test a blob (or string) against a set of possible sha1s. read_file() uses the file-loading code from applypatch so it can read MTD partitions as well. This is the start of better integration between applypatch and the rest of edify. b/2361316 - VZW Issue PP628: Continuous reset to Droid logo: framework-res.apk update failed (CR LIBtt59130) Change-Id: Ibd038074749a4d515de1f115c498c6c589ee91e5 --- applypatch/imgdiff.c | 1010 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1010 insertions(+) create mode 100644 applypatch/imgdiff.c (limited to 'applypatch/imgdiff.c') diff --git a/applypatch/imgdiff.c b/applypatch/imgdiff.c new file mode 100644 index 000000000..6b9ebee5c --- /dev/null +++ b/applypatch/imgdiff.c @@ -0,0 +1,1010 @@ +/* + * Copyright (C) 2009 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/* + * This program constructs binary patches for images -- such as boot.img + * and recovery.img -- that consist primarily of large chunks of gzipped + * data interspersed with uncompressed data. Doing a naive bsdiff of + * these files is not useful because small changes in the data lead to + * large changes in the compressed bitstream; bsdiff patches of gzipped + * data are typically as large as the data itself. + * + * To patch these usefully, we break the source and target images up into + * chunks of two types: "normal" and "gzip". Normal chunks are simply + * patched using a plain bsdiff. Gzip chunks are first expanded, then a + * bsdiff is applied to the uncompressed data, then the patched data is + * gzipped using the same encoder parameters. Patched chunks are + * concatenated together to create the output file; the output image + * should be *exactly* the same series of bytes as the target image used + * originally to generate the patch. + * + * To work well with this tool, the gzipped sections of the target + * image must have been generated using the same deflate encoder that + * is available in applypatch, namely, the one in the zlib library. + * In practice this means that images should be compressed using the + * "minigzip" tool included in the zlib distribution, not the GNU gzip + * program. + * + * An "imgdiff" patch consists of a header describing the chunk structure + * of the file and any encoding parameters needed for the gzipped + * chunks, followed by N bsdiff patches, one per chunk. + * + * For a diff to be generated, the source and target images must have the + * same "chunk" structure: that is, the same number of gzipped and normal + * chunks in the same order. Android boot and recovery images currently + * consist of five chunks: a small normal header, a gzipped kernel, a + * small normal section, a gzipped ramdisk, and finally a small normal + * footer. + * + * Caveats: we locate gzipped sections within the source and target + * images by searching for the byte sequence 1f8b0800: 1f8b is the gzip + * magic number; 08 specifies the "deflate" encoding [the only encoding + * supported by the gzip standard]; and 00 is the flags byte. We do not + * currently support any extra header fields (which would be indicated by + * a nonzero flags byte). We also don't handle the case when that byte + * sequence appears spuriously in the file. (Note that it would have to + * occur spuriously within a normal chunk to be a problem.) + * + * + * The imgdiff patch header looks like this: + * + * "IMGDIFF1" (8) [magic number and version] + * chunk count (4) + * for each chunk: + * chunk type (4) [CHUNK_{NORMAL, GZIP, DEFLATE, RAW}] + * if chunk type == CHUNK_NORMAL: + * source start (8) + * source len (8) + * bsdiff patch offset (8) [from start of patch file] + * if chunk type == CHUNK_GZIP: (version 1 only) + * source start (8) + * source len (8) + * bsdiff patch offset (8) [from start of patch file] + * source expanded len (8) [size of uncompressed source] + * target expected len (8) [size of uncompressed target] + * gzip level (4) + * method (4) + * windowBits (4) + * memLevel (4) + * strategy (4) + * gzip header len (4) + * gzip header (gzip header len) + * gzip footer (8) + * if chunk type == CHUNK_DEFLATE: (version 2 only) + * source start (8) + * source len (8) + * bsdiff patch offset (8) [from start of patch file] + * source expanded len (8) [size of uncompressed source] + * target expected len (8) [size of uncompressed target] + * gzip level (4) + * method (4) + * windowBits (4) + * memLevel (4) + * strategy (4) + * if chunk type == RAW: (version 2 only) + * target len (4) + * data (target len) + * + * All integers are little-endian. "source start" and "source len" + * specify the section of the input image that comprises this chunk, + * including the gzip header and footer for gzip chunks. "source + * expanded len" is the size of the uncompressed source data. "target + * expected len" is the size of the uncompressed data after applying + * the bsdiff patch. The next five parameters specify the zlib + * parameters to be used when compressing the patched data, and the + * next three specify the header and footer to be wrapped around the + * compressed data to create the output chunk (so that header contents + * like the timestamp are recreated exactly). + * + * After the header there are 'chunk count' bsdiff patches; the offset + * of each from the beginning of the file is specified in the header. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "zlib.h" +#include "imgdiff.h" +#include "utils.h" + +typedef struct { + int type; // CHUNK_NORMAL, CHUNK_DEFLATE + size_t start; // offset of chunk in original image file + + size_t len; + unsigned char* data; // data to be patched (uncompressed, for deflate chunks) + + size_t source_start; + size_t source_len; + + off_t* I; // used by bsdiff + + // --- for CHUNK_DEFLATE chunks only: --- + + // original (compressed) deflate data + size_t deflate_len; + unsigned char* deflate_data; + + char* filename; // used for zip entries + + // deflate encoder parameters + int level, method, windowBits, memLevel, strategy; + + size_t source_uncompressed_len; +} ImageChunk; + +typedef struct { + int data_offset; + int deflate_len; + int uncomp_len; + char* filename; +} ZipFileEntry; + +static int fileentry_compare(const void* a, const void* b) { + int ao = ((ZipFileEntry*)a)->data_offset; + int bo = ((ZipFileEntry*)b)->data_offset; + if (ao < bo) { + return -1; + } else if (ao > bo) { + return 1; + } else { + return 0; + } +} + +// from bsdiff.c +int bsdiff(u_char* old, off_t oldsize, off_t** IP, u_char* new, off_t newsize, + const char* patch_filename); + +unsigned char* ReadZip(const char* filename, + int* num_chunks, ImageChunk** chunks, + int include_pseudo_chunk) { + struct stat st; + if (stat(filename, &st) != 0) { + printf("failed to stat \"%s\": %s\n", filename, strerror(errno)); + return NULL; + } + + unsigned char* img = malloc(st.st_size); + FILE* f = fopen(filename, "rb"); + if (fread(img, 1, st.st_size, f) != st.st_size) { + printf("failed to read \"%s\" %s\n", filename, strerror(errno)); + fclose(f); + return NULL; + } + fclose(f); + + // look for the end-of-central-directory record. + + int i; + for (i = st.st_size-20; i >= 0 && i > st.st_size - 65600; --i) { + if (img[i] == 0x50 && img[i+1] == 0x4b && + img[i+2] == 0x05 && img[i+3] == 0x06) { + break; + } + } + // double-check: this archive consists of a single "disk" + if (!(img[i+4] == 0 && img[i+5] == 0 && img[i+6] == 0 && img[i+7] == 0)) { + printf("can't process multi-disk archive\n"); + return NULL; + } + + int cdcount = Read2(img+i+8); + int cdoffset = Read4(img+i+16); + + ZipFileEntry* temp_entries = malloc(cdcount * sizeof(ZipFileEntry)); + int entrycount = 0; + + unsigned char* cd = img+cdoffset; + for (i = 0; i < cdcount; ++i) { + if (!(cd[0] == 0x50 && cd[1] == 0x4b && cd[2] == 0x01 && cd[3] == 0x02)) { + printf("bad central directory entry %d\n", i); + return NULL; + } + + int clen = Read4(cd+20); // compressed len + int ulen = Read4(cd+24); // uncompressed len + int nlen = Read2(cd+28); // filename len + int xlen = Read2(cd+30); // extra field len + int mlen = Read2(cd+32); // file comment len + int hoffset = Read4(cd+42); // local header offset + + char* filename = malloc(nlen+1); + memcpy(filename, cd+46, nlen); + filename[nlen] = '\0'; + + int method = Read2(cd+10); + + cd += 46 + nlen + xlen + mlen; + + if (method != 8) { // 8 == deflate + free(filename); + continue; + } + + unsigned char* lh = img + hoffset; + + if (!(lh[0] == 0x50 && lh[1] == 0x4b && lh[2] == 0x03 && lh[3] == 0x04)) { + printf("bad local file header entry %d\n", i); + return NULL; + } + + if (Read2(lh+26) != nlen || memcmp(lh+30, filename, nlen) != 0) { + printf("central dir filename doesn't match local header\n"); + return NULL; + } + + xlen = Read2(lh+28); // extra field len; might be different from CD entry? + + temp_entries[entrycount].data_offset = hoffset+30+nlen+xlen; + temp_entries[entrycount].deflate_len = clen; + temp_entries[entrycount].uncomp_len = ulen; + temp_entries[entrycount].filename = filename; + ++entrycount; + } + + qsort(temp_entries, entrycount, sizeof(ZipFileEntry), fileentry_compare); + +#if 0 + printf("found %d deflated entries\n", entrycount); + for (i = 0; i < entrycount; ++i) { + printf("off %10d len %10d unlen %10d %p %s\n", + temp_entries[i].data_offset, + temp_entries[i].deflate_len, + temp_entries[i].uncomp_len, + temp_entries[i].filename, + temp_entries[i].filename); + } +#endif + + *num_chunks = 0; + *chunks = malloc((entrycount*2+2) * sizeof(ImageChunk)); + ImageChunk* curr = *chunks; + + if (include_pseudo_chunk) { + curr->type = CHUNK_NORMAL; + curr->start = 0; + curr->len = st.st_size; + curr->data = img; + curr->filename = NULL; + curr->I = NULL; + ++curr; + ++*num_chunks; + } + + int pos = 0; + int nextentry = 0; + + while (pos < st.st_size) { + if (nextentry < entrycount && pos == temp_entries[nextentry].data_offset) { + curr->type = CHUNK_DEFLATE; + curr->start = pos; + curr->deflate_len = temp_entries[nextentry].deflate_len; + curr->deflate_data = img + pos; + curr->filename = temp_entries[nextentry].filename; + curr->I = NULL; + + curr->len = temp_entries[nextentry].uncomp_len; + curr->data = malloc(curr->len); + + z_stream strm; + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = curr->deflate_len; + strm.next_in = curr->deflate_data; + + // -15 means we are decoding a 'raw' deflate stream; zlib will + // not expect zlib headers. + int ret = inflateInit2(&strm, -15); + + strm.avail_out = curr->len; + strm.next_out = curr->data; + ret = inflate(&strm, Z_NO_FLUSH); + if (ret != Z_STREAM_END) { + printf("failed to inflate \"%s\"; %d\n", curr->filename, ret); + return NULL; + } + + inflateEnd(&strm); + + pos += curr->deflate_len; + ++nextentry; + ++*num_chunks; + ++curr; + continue; + } + + // use a normal chunk to take all the data up to the start of the + // next deflate section. + + curr->type = CHUNK_NORMAL; + curr->start = pos; + if (nextentry < entrycount) { + curr->len = temp_entries[nextentry].data_offset - pos; + } else { + curr->len = st.st_size - pos; + } + curr->data = img + pos; + curr->filename = NULL; + curr->I = NULL; + pos += curr->len; + + ++*num_chunks; + ++curr; + } + + free(temp_entries); + return img; +} + +/* + * Read the given file and break it up into chunks, putting the number + * of chunks and their info in *num_chunks and **chunks, + * respectively. Returns a malloc'd block of memory containing the + * contents of the file; various pointers in the output chunk array + * will point into this block of memory. The caller should free the + * return value when done with all the chunks. Returns NULL on + * failure. + */ +unsigned char* ReadImage(const char* filename, + int* num_chunks, ImageChunk** chunks) { + struct stat st; + if (stat(filename, &st) != 0) { + printf("failed to stat \"%s\": %s\n", filename, strerror(errno)); + return NULL; + } + + unsigned char* img = malloc(st.st_size + 4); + FILE* f = fopen(filename, "rb"); + if (fread(img, 1, st.st_size, f) != st.st_size) { + printf("failed to read \"%s\" %s\n", filename, strerror(errno)); + fclose(f); + return NULL; + } + fclose(f); + + // append 4 zero bytes to the data so we can always search for the + // four-byte string 1f8b0800 starting at any point in the actual + // file data, without special-casing the end of the data. + memset(img+st.st_size, 0, 4); + + size_t pos = 0; + + *num_chunks = 0; + *chunks = NULL; + + while (pos < st.st_size) { + unsigned char* p = img+pos; + + if (st.st_size - pos >= 4 && + p[0] == 0x1f && p[1] == 0x8b && + p[2] == 0x08 && // deflate compression + p[3] == 0x00) { // no header flags + // 'pos' is the offset of the start of a gzip chunk. + + *num_chunks += 3; + *chunks = realloc(*chunks, *num_chunks * sizeof(ImageChunk)); + ImageChunk* curr = *chunks + (*num_chunks-3); + + // create a normal chunk for the header. + curr->start = pos; + curr->type = CHUNK_NORMAL; + curr->len = GZIP_HEADER_LEN; + curr->data = p; + curr->I = NULL; + + pos += curr->len; + p += curr->len; + ++curr; + + curr->type = CHUNK_DEFLATE; + curr->filename = NULL; + curr->I = NULL; + + // We must decompress this chunk in order to discover where it + // ends, and so we can put the uncompressed data and its length + // into curr->data and curr->len. + + size_t allocated = 32768; + curr->len = 0; + curr->data = malloc(allocated); + curr->start = pos; + curr->deflate_data = p; + + z_stream strm; + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = st.st_size - pos; + strm.next_in = p; + + // -15 means we are decoding a 'raw' deflate stream; zlib will + // not expect zlib headers. + int ret = inflateInit2(&strm, -15); + + do { + strm.avail_out = allocated - curr->len; + strm.next_out = curr->data + curr->len; + ret = inflate(&strm, Z_NO_FLUSH); + curr->len = allocated - strm.avail_out; + if (strm.avail_out == 0) { + allocated *= 2; + curr->data = realloc(curr->data, allocated); + } + } while (ret != Z_STREAM_END); + + curr->deflate_len = st.st_size - strm.avail_in - pos; + inflateEnd(&strm); + pos += curr->deflate_len; + p += curr->deflate_len; + ++curr; + + // create a normal chunk for the footer + + curr->type = CHUNK_NORMAL; + curr->start = pos; + curr->len = GZIP_FOOTER_LEN; + curr->data = img+pos; + curr->I = NULL; + + pos += curr->len; + p += curr->len; + ++curr; + + // The footer (that we just skipped over) contains the size of + // the uncompressed data. Double-check to make sure that it + // matches the size of the data we got when we actually did + // the decompression. + size_t footer_size = Read4(p-4); + if (footer_size != curr[-2].len) { + printf("Error: footer size %d != decompressed size %d\n", + footer_size, curr[-2].len); + free(img); + return NULL; + } + } else { + // Reallocate the list for every chunk; we expect the number of + // chunks to be small (5 for typical boot and recovery images). + ++*num_chunks; + *chunks = realloc(*chunks, *num_chunks * sizeof(ImageChunk)); + ImageChunk* curr = *chunks + (*num_chunks-1); + curr->start = pos; + curr->I = NULL; + + // 'pos' is not the offset of the start of a gzip chunk, so scan + // forward until we find a gzip header. + curr->type = CHUNK_NORMAL; + curr->data = p; + + for (curr->len = 0; curr->len < (st.st_size - pos); ++curr->len) { + if (p[curr->len] == 0x1f && + p[curr->len+1] == 0x8b && + p[curr->len+2] == 0x08 && + p[curr->len+3] == 0x00) { + break; + } + } + pos += curr->len; + } + } + + return img; +} + +#define BUFFER_SIZE 32768 + +/* + * Takes the uncompressed data stored in the chunk, compresses it + * using the zlib parameters stored in the chunk, and checks that it + * matches exactly the compressed data we started with (also stored in + * the chunk). Return 0 on success. + */ +int TryReconstruction(ImageChunk* chunk, unsigned char* out) { + size_t p = 0; + +#if 0 + printf("trying %d %d %d %d %d\n", + chunk->level, chunk->method, chunk->windowBits, + chunk->memLevel, chunk->strategy); +#endif + + z_stream strm; + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = chunk->len; + strm.next_in = chunk->data; + int ret; + ret = deflateInit2(&strm, chunk->level, chunk->method, chunk->windowBits, + chunk->memLevel, chunk->strategy); + do { + strm.avail_out = BUFFER_SIZE; + strm.next_out = out; + ret = deflate(&strm, Z_FINISH); + size_t have = BUFFER_SIZE - strm.avail_out; + + if (memcmp(out, chunk->deflate_data+p, have) != 0) { + // mismatch; data isn't the same. + deflateEnd(&strm); + return -1; + } + p += have; + } while (ret != Z_STREAM_END); + deflateEnd(&strm); + if (p != chunk->deflate_len) { + // mismatch; ran out of data before we should have. + return -1; + } + return 0; +} + +/* + * Verify that we can reproduce exactly the same compressed data that + * we started with. Sets the level, method, windowBits, memLevel, and + * strategy fields in the chunk to the encoding parameters needed to + * produce the right output. Returns 0 on success. + */ +int ReconstructDeflateChunk(ImageChunk* chunk) { + if (chunk->type != CHUNK_DEFLATE) { + printf("attempt to reconstruct non-deflate chunk\n"); + return -1; + } + + size_t p = 0; + unsigned char* out = malloc(BUFFER_SIZE); + + // We only check two combinations of encoder parameters: level 6 + // (the default) and level 9 (the maximum). + for (chunk->level = 6; chunk->level <= 9; chunk->level += 3) { + chunk->windowBits = -15; // 32kb window; negative to indicate a raw stream. + chunk->memLevel = 8; // the default value. + chunk->method = Z_DEFLATED; + chunk->strategy = Z_DEFAULT_STRATEGY; + + if (TryReconstruction(chunk, out) == 0) { + free(out); + return 0; + } + } + + free(out); + return -1; +} + +/* + * Given source and target chunks, compute a bsdiff patch between them + * by running bsdiff in a subprocess. Return the patch data, placing + * its length in *size. Return NULL on failure. We expect the bsdiff + * program to be in the path. + */ +unsigned char* MakePatch(ImageChunk* src, ImageChunk* tgt, size_t* size) { + if (tgt->type == CHUNK_NORMAL) { + if (tgt->len <= 160) { + tgt->type = CHUNK_RAW; + *size = tgt->len; + return tgt->data; + } + } + + char ptemp[] = "/tmp/imgdiff-patch-XXXXXX"; + mkstemp(ptemp); + + int r = bsdiff(src->data, src->len, &(src->I), tgt->data, tgt->len, ptemp); + if (r != 0) { + printf("bsdiff() failed: %d\n", r); + return NULL; + } + + struct stat st; + if (stat(ptemp, &st) != 0) { + printf("failed to stat patch file %s: %s\n", + ptemp, strerror(errno)); + return NULL; + } + + unsigned char* data = malloc(st.st_size); + + if (tgt->type == CHUNK_NORMAL && tgt->len <= st.st_size) { + unlink(ptemp); + + tgt->type = CHUNK_RAW; + *size = tgt->len; + return tgt->data; + } + + *size = st.st_size; + + FILE* f = fopen(ptemp, "rb"); + if (f == NULL) { + printf("failed to open patch %s: %s\n", ptemp, strerror(errno)); + return NULL; + } + if (fread(data, 1, st.st_size, f) != st.st_size) { + printf("failed to read patch %s: %s\n", ptemp, strerror(errno)); + return NULL; + } + fclose(f); + + unlink(ptemp); + + tgt->source_start = src->start; + switch (tgt->type) { + case CHUNK_NORMAL: + tgt->source_len = src->len; + break; + case CHUNK_DEFLATE: + tgt->source_len = src->deflate_len; + tgt->source_uncompressed_len = src->len; + break; + } + + return data; +} + +/* + * Cause a gzip chunk to be treated as a normal chunk (ie, as a blob + * of uninterpreted data). The resulting patch will likely be about + * as big as the target file, but it lets us handle the case of images + * where some gzip chunks are reconstructible but others aren't (by + * treating the ones that aren't as normal chunks). + */ +void ChangeDeflateChunkToNormal(ImageChunk* ch) { + if (ch->type != CHUNK_DEFLATE) return; + ch->type = CHUNK_NORMAL; + free(ch->data); + ch->data = ch->deflate_data; + ch->len = ch->deflate_len; +} + +/* + * Return true if the data in the chunk is identical (including the + * compressed representation, for gzip chunks). + */ +int AreChunksEqual(ImageChunk* a, ImageChunk* b) { + if (a->type != b->type) return 0; + + switch (a->type) { + case CHUNK_NORMAL: + return a->len == b->len && memcmp(a->data, b->data, a->len) == 0; + + case CHUNK_DEFLATE: + return a->deflate_len == b->deflate_len && + memcmp(a->deflate_data, b->deflate_data, a->deflate_len) == 0; + + default: + printf("unknown chunk type %d\n", a->type); + return 0; + } +} + +/* + * Look for runs of adjacent normal chunks and compress them down into + * a single chunk. (Such runs can be produced when deflate chunks are + * changed to normal chunks.) + */ +void MergeAdjacentNormalChunks(ImageChunk* chunks, int* num_chunks) { + int out = 0; + int in_start = 0, in_end; + while (in_start < *num_chunks) { + if (chunks[in_start].type != CHUNK_NORMAL) { + in_end = in_start+1; + } else { + // in_start is a normal chunk. Look for a run of normal chunks + // that constitute a solid block of data (ie, each chunk begins + // where the previous one ended). + for (in_end = in_start+1; + in_end < *num_chunks && chunks[in_end].type == CHUNK_NORMAL && + (chunks[in_end].start == + chunks[in_end-1].start + chunks[in_end-1].len && + chunks[in_end].data == + chunks[in_end-1].data + chunks[in_end-1].len); + ++in_end); + } + + if (in_end == in_start+1) { +#if 0 + printf("chunk %d is now %d\n", in_start, out); +#endif + if (out != in_start) { + memcpy(chunks+out, chunks+in_start, sizeof(ImageChunk)); + } + } else { +#if 0 + printf("collapse normal chunks %d-%d into %d\n", in_start, in_end-1, out); +#endif + + // Merge chunks [in_start, in_end-1] into one chunk. Since the + // data member of each chunk is just a pointer into an in-memory + // copy of the file, this can be done without recopying (the + // output chunk has the first chunk's start location and data + // pointer, and length equal to the sum of the input chunk + // lengths). + chunks[out].type = CHUNK_NORMAL; + chunks[out].start = chunks[in_start].start; + chunks[out].data = chunks[in_start].data; + chunks[out].len = chunks[in_end-1].len + + (chunks[in_end-1].start - chunks[in_start].start); + } + + ++out; + in_start = in_end; + } + *num_chunks = out; +} + +ImageChunk* FindChunkByName(const char* name, + ImageChunk* chunks, int num_chunks) { + int i; + for (i = 0; i < num_chunks; ++i) { + if (chunks[i].type == CHUNK_DEFLATE && chunks[i].filename && + strcmp(name, chunks[i].filename) == 0) { + return chunks+i; + } + } + return NULL; +} + +void DumpChunks(ImageChunk* chunks, int num_chunks) { + int i; + for (i = 0; i < num_chunks; ++i) { + printf("chunk %d: type %d start %d len %d\n", + i, chunks[i].type, chunks[i].start, chunks[i].len); + } +} + +int main(int argc, char** argv) { + if (argc != 4 && argc != 5) { + usage: + printf("usage: %s [-z] \n", + argv[0]); + return 2; + } + + int zip_mode = 0; + + if (strcmp(argv[1], "-z") == 0) { + zip_mode = 1; + --argc; + ++argv; + } + + + int num_src_chunks; + ImageChunk* src_chunks; + int num_tgt_chunks; + ImageChunk* tgt_chunks; + int i; + + if (zip_mode) { + if (ReadZip(argv[1], &num_src_chunks, &src_chunks, 1) == NULL) { + printf("failed to break apart source zip file\n"); + return 1; + } + if (ReadZip(argv[2], &num_tgt_chunks, &tgt_chunks, 0) == NULL) { + printf("failed to break apart target zip file\n"); + return 1; + } + } else { + if (ReadImage(argv[1], &num_src_chunks, &src_chunks) == NULL) { + printf("failed to break apart source image\n"); + return 1; + } + if (ReadImage(argv[2], &num_tgt_chunks, &tgt_chunks) == NULL) { + printf("failed to break apart target image\n"); + return 1; + } + + // Verify that the source and target images have the same chunk + // structure (ie, the same sequence of deflate and normal chunks). + + if (!zip_mode) { + // Merge the gzip header and footer in with any adjacent + // normal chunks. + MergeAdjacentNormalChunks(tgt_chunks, &num_tgt_chunks); + MergeAdjacentNormalChunks(src_chunks, &num_src_chunks); + } + + if (num_src_chunks != num_tgt_chunks) { + printf("source and target don't have same number of chunks!\n"); + printf("source chunks:\n"); + DumpChunks(src_chunks, num_src_chunks); + printf("target chunks:\n"); + DumpChunks(tgt_chunks, num_tgt_chunks); + return 1; + } + for (i = 0; i < num_src_chunks; ++i) { + if (src_chunks[i].type != tgt_chunks[i].type) { + printf("source and target don't have same chunk " + "structure! (chunk %d)\n", i); + printf("source chunks:\n"); + DumpChunks(src_chunks, num_src_chunks); + printf("target chunks:\n"); + DumpChunks(tgt_chunks, num_tgt_chunks); + return 1; + } + } + } + + for (i = 0; i < num_tgt_chunks; ++i) { + if (tgt_chunks[i].type == CHUNK_DEFLATE) { + // Confirm that given the uncompressed chunk data in the target, we + // can recompress it and get exactly the same bits as are in the + // input target image. If this fails, treat the chunk as a normal + // non-deflated chunk. + if (ReconstructDeflateChunk(tgt_chunks+i) < 0) { + printf("failed to reconstruct target deflate chunk %d [%s]; " + "treating as normal\n", i, tgt_chunks[i].filename); + ChangeDeflateChunkToNormal(tgt_chunks+i); + if (zip_mode) { + ImageChunk* src = FindChunkByName(tgt_chunks[i].filename, src_chunks, num_src_chunks); + if (src) { + ChangeDeflateChunkToNormal(src); + } + } else { + ChangeDeflateChunkToNormal(src_chunks+i); + } + continue; + } + + // If two deflate chunks are identical (eg, the kernel has not + // changed between two builds), treat them as normal chunks. + // This makes applypatch much faster -- it can apply a trivial + // patch to the compressed data, rather than uncompressing and + // recompressing to apply the trivial patch to the uncompressed + // data. + ImageChunk* src; + if (zip_mode) { + src = FindChunkByName(tgt_chunks[i].filename, src_chunks, num_src_chunks); + } else { + src = src_chunks+i; + } + + if (src == NULL || AreChunksEqual(tgt_chunks+i, src)) { + ChangeDeflateChunkToNormal(tgt_chunks+i); + if (src) { + ChangeDeflateChunkToNormal(src); + } + } + } + } + + // Merging neighboring normal chunks. + if (zip_mode) { + // For zips, we only need to do this to the target: deflated + // chunks are matched via filename, and normal chunks are patched + // using the entire source file as the source. + MergeAdjacentNormalChunks(tgt_chunks, &num_tgt_chunks); + } else { + // For images, we need to maintain the parallel structure of the + // chunk lists, so do the merging in both the source and target + // lists. + MergeAdjacentNormalChunks(tgt_chunks, &num_tgt_chunks); + MergeAdjacentNormalChunks(src_chunks, &num_src_chunks); + if (num_src_chunks != num_tgt_chunks) { + // This shouldn't happen. + printf("merging normal chunks went awry\n"); + return 1; + } + } + + // Compute bsdiff patches for each chunk's data (the uncompressed + // data, in the case of deflate chunks). + + printf("Construct patches for %d chunks...\n", num_tgt_chunks); + unsigned char** patch_data = malloc(num_tgt_chunks * sizeof(unsigned char*)); + size_t* patch_size = malloc(num_tgt_chunks * sizeof(size_t)); + for (i = 0; i < num_tgt_chunks; ++i) { + if (zip_mode) { + ImageChunk* src; + if (tgt_chunks[i].type == CHUNK_DEFLATE && + (src = FindChunkByName(tgt_chunks[i].filename, src_chunks, + num_src_chunks))) { + patch_data[i] = MakePatch(src, tgt_chunks+i, patch_size+i); + } else { + patch_data[i] = MakePatch(src_chunks, tgt_chunks+i, patch_size+i); + } + } else { + patch_data[i] = MakePatch(src_chunks+i, tgt_chunks+i, patch_size+i); + } + printf("patch %3d is %d bytes (of %d)\n", + i, patch_size[i], tgt_chunks[i].source_len); + } + + // Figure out how big the imgdiff file header is going to be, so + // that we can correctly compute the offset of each bsdiff patch + // within the file. + + size_t total_header_size = 12; + for (i = 0; i < num_tgt_chunks; ++i) { + total_header_size += 4; + switch (tgt_chunks[i].type) { + case CHUNK_NORMAL: + total_header_size += 8*3; + break; + case CHUNK_DEFLATE: + total_header_size += 8*5 + 4*5; + break; + case CHUNK_RAW: + total_header_size += 4 + patch_size[i]; + break; + } + } + + size_t offset = total_header_size; + + FILE* f = fopen(argv[3], "wb"); + + // Write out the headers. + + fwrite("IMGDIFF2", 1, 8, f); + Write4(num_tgt_chunks, f); + for (i = 0; i < num_tgt_chunks; ++i) { + Write4(tgt_chunks[i].type, f); + + switch (tgt_chunks[i].type) { + case CHUNK_NORMAL: + printf("chunk %3d: normal (%10d, %10d) %10d\n", i, + tgt_chunks[i].start, tgt_chunks[i].len, patch_size[i]); + Write8(tgt_chunks[i].source_start, f); + Write8(tgt_chunks[i].source_len, f); + Write8(offset, f); + offset += patch_size[i]; + break; + + case CHUNK_DEFLATE: + printf("chunk %3d: deflate (%10d, %10d) %10d %s\n", i, + tgt_chunks[i].start, tgt_chunks[i].deflate_len, patch_size[i], + tgt_chunks[i].filename); + Write8(tgt_chunks[i].source_start, f); + Write8(tgt_chunks[i].source_len, f); + Write8(offset, f); + Write8(tgt_chunks[i].source_uncompressed_len, f); + Write8(tgt_chunks[i].len, f); + Write4(tgt_chunks[i].level, f); + Write4(tgt_chunks[i].method, f); + Write4(tgt_chunks[i].windowBits, f); + Write4(tgt_chunks[i].memLevel, f); + Write4(tgt_chunks[i].strategy, f); + offset += patch_size[i]; + break; + + case CHUNK_RAW: + printf("chunk %3d: raw (%10d, %10d)\n", i, + tgt_chunks[i].start, tgt_chunks[i].len); + Write4(patch_size[i], f); + fwrite(patch_data[i], 1, patch_size[i], f); + break; + } + } + + // Append each chunk's bsdiff patch, in order. + + for (i = 0; i < num_tgt_chunks; ++i) { + if (tgt_chunks[i].type != CHUNK_RAW) { + fwrite(patch_data[i], 1, patch_size[i], f); + } + } + + fclose(f); + + return 0; +} -- cgit v1.2.3