From 649f23b0724479a214845cd6a38eb02a22aebe1b Mon Sep 17 00:00:00 2001 From: Simone <26844016+simonebortolin@users.noreply.github.com> Date: Mon, 2 Jan 2023 10:25:47 +0100 Subject: Add photo of ZTE F601v9 and add some infos to all ont's (#46) (#79) * Add photo of ZTE F601v9 and add some infos to all ont's (#46) * minor fixs * Update _config.yml * Some fix to standarize Co-authored-by: Simone Bortolin --- _ont/ont-adtran-sdx-611.md | 28 ++-- _ont/ont-adtran-sdx-611q.md | 28 ++-- _ont/ont-cig-g-97cm.md | 28 ++-- _ont/ont-cig-g-97cp.md | 30 ++-- _ont/ont-cig-g-97sp.md | 32 ++++ _ont/ont-d-link-dpn-100-rev-c1.md | 2 +- _ont/ont-fs-com-gpon-onu-stick-with-mac.md | 226 +++++++++++++-------------- _ont/ont-genexis-ft-g2110c.md | 26 ++-- _ont/ont-halny-hl-gsfp.md | 30 ++-- _ont/ont-hilink-hl23446.md | 30 ++-- _ont/ont-huawei-eg8010h.md | 39 +++++ _ont/ont-huawei-eg8010n.md | 27 ++++ _ont/ont-huawei-hg8010h.md | 4 +- _ont/ont-huawei-ma5671a.md | 234 ++++++++++++++-------------- _ont/ont-leox-lxt-010g-d.md | 2 +- _ont/ont-leox-lxt-010h-d.md | 4 +- _ont/ont-leox-lxt-010s-h.md | 3 +- _ont/ont-nokia-g-010g-a.md | 2 +- _ont/ont-nokia-g-010g-p.md | 6 +- _ont/ont-nokia-g-010g-q.md | 5 +- _ont/ont-nokia-g-010g-r.md | 3 +- _ont/ont-nokia-g-010g-t.md | 5 +- _ont/ont-nokia-g-010s-a.md | 2 + _ont/ont-nokia-g-010s-b.md | 7 +- _ont/ont-nokia-g-010s-p.md | 2 + _ont/ont-nokia-g-010s-q.md | 1 + _ont/ont-odi-zte-dfp-34x-2c2.md | 2 +- _ont/ont-technicolor-afm0002.md | 2 +- _ont/ont-technicolor-afm0003.md | 2 +- _ont/ont-tplink-xz000-g3.md | 2 +- _ont/ont-ziza-op151s.md | 27 +++- _ont/ont-zte-f6005.md | 2 +- _ont/ont-zte-f601.md | 56 ++++--- _ont/ont-zyxel-pmg3000-d20b.md | 236 +++++++++++++++-------------- _ont/ont-zyxel-pmg3100-t0.md | 2 +- _ont/ont-zyxel-pmg5100-t0.md | 2 +- assets/img/f601_v8.jpg | Bin 22329 -> 0 bytes assets/img/f601v9/back.jpg | Bin 0 -> 69259 bytes assets/img/f601v9/front.jpg | Bin 0 -> 56608 bytes assets/img/f601v9/header.jpg | Bin 0 -> 60791 bytes assets/img/f601v9/teardown-1.jpg | Bin 0 -> 227225 bytes assets/img/f601v9/teardown-2.jpg | Bin 0 -> 172405 bytes assets/img/f601v9/teardown-3.jpg | Bin 0 -> 211642 bytes 43 files changed, 640 insertions(+), 499 deletions(-) create mode 100644 _ont/ont-cig-g-97sp.md create mode 100644 _ont/ont-huawei-eg8010h.md create mode 100644 _ont/ont-huawei-eg8010n.md delete mode 100644 assets/img/f601_v8.jpg create mode 100644 assets/img/f601v9/back.jpg create mode 100644 assets/img/f601v9/front.jpg create mode 100644 assets/img/f601v9/header.jpg create mode 100644 assets/img/f601v9/teardown-1.jpg create mode 100644 assets/img/f601v9/teardown-2.jpg create mode 100644 assets/img/f601v9/teardown-3.jpg diff --git a/_ont/ont-adtran-sdx-611.md b/_ont/ont-adtran-sdx-611.md index 68ec1dd..24b9652 100644 --- a/_ont/ont-adtran-sdx-611.md +++ b/_ont/ont-adtran-sdx-611.md @@ -7,20 +7,20 @@ parent: Adtran # Hardware Specifications -| | | -| ----------- | ----------- | -| Vendor | Adtran | -| Model | SDX 611 | -| Chipset | | -| Flash | | -| RAM | | -| System | | -| HSGMII | No | -| Optics | | -| IP address | | -| Web Gui | | -| SSH | | -| Form Factor | ONT | +| | | +| ----------- | ------- | +| Vendor | Adtran | +| Model | SDX 611 | +| Chipset | | +| Flash | | +| RAM | | +| System | | +| 2.5GbaseT | No | +| Optics | | +| IP address | | +| Web Gui | | +| SSH | | +| Form Factor | ONT | ## List of software versions diff --git a/_ont/ont-adtran-sdx-611q.md b/_ont/ont-adtran-sdx-611q.md index 616a75c..91a9eb1 100644 --- a/_ont/ont-adtran-sdx-611q.md +++ b/_ont/ont-adtran-sdx-611q.md @@ -7,20 +7,20 @@ parent: Adtran # Hardware Specifications -| | | -| ----------- | ----------- | -| Vendor | Adtran | -| Model | SDX 611Q | -| Chipset | | -| Flash | | -| RAM | | -| System | | -| HSGMII | ✅ | -| Optics | | -| IP address | | -| Web Gui | | -| SSH | | -| Form Factor | ONT | +| | | +| ----------- | -------- | +| Vendor | Adtran | +| Model | SDX 611Q | +| Chipset | | +| Flash | | +| RAM | | +| System | | +| 2.5GbaseT | Yes | +| Optics | | +| IP address | | +| Web Gui | | +| SSH | | +| Form Factor | ONT | ## List of software versions diff --git a/_ont/ont-cig-g-97cm.md b/_ont/ont-cig-g-97cm.md index 338803d..c64cd77 100644 --- a/_ont/ont-cig-g-97cm.md +++ b/_ont/ont-cig-g-97cm.md @@ -7,20 +7,20 @@ parent: CIG # Hardware Specifications -| | | -| ----------- | --------------------------------- | -| Vendor | CIG | -| Model | G-97CM | -| Chipset | Realtek RTL9601B | -| Flash | | -| RAM | | -| System | Linux | -| HSGMII | Yes | -| Optics | SC/APC | -| IP address | 192.168.1.1 | -| Web Gui | | -| SSH | | -| Form Factor | ONT | +| | | +| ----------- | ---------------- | +| Vendor | CIG | +| Model | G-97CM | +| Chipset | Realtek RTL9601B | +| Flash | | +| RAM | | +| System | Linux | +| 2.5GbaseT | No | +| Optics | SC/APC | +| IP address | 192.168.1.1 | +| Web Gui | | +| SSH | | +| Form Factor | ONT | # Miscellaneous Links diff --git a/_ont/ont-cig-g-97cp.md b/_ont/ont-cig-g-97cp.md index 3342d73..cad2369 100644 --- a/_ont/ont-cig-g-97cp.md +++ b/_ont/ont-cig-g-97cp.md @@ -7,27 +7,27 @@ parent: CIG # Hardware Specifications -| | | -| ----------- | --------------------------------- | -| Vendor | CIG | -| Model | G-97CP | -| Chipset | Realtek RTL9601D | -| Flash | | -| RAM | | -| System | Linux | -| HSGMII | Yes | -| Optics | SC/APC | -| IP address | 192.168.1.1 | -| Web Gui | | -| SSH | | -| Form Factor | ONT | +| | | +| ----------- | ---------------- | +| Vendor | CIG | +| Model | G-97CP | +| Chipset | Realtek RTL9601D | +| Flash | | +| RAM | | +| System | Linux | +| 2.5GbaseT | Yes | +| Optics | SC/APC | +| IP address | 192.168.1.1 | +| Web Gui | | +| SSH | | +| Form Factor | ONT | {% include image.html file="cig/cig-1.jpg" alt="CIG G-97CP Unidata" caption="CIG G-97CP Unidata @papin" %} {% include image.html file="cig/cig-2.jpg" alt="CIG G-97CP Unidata" caption="CIG G-97CP Unidata @papin" %} # Note -This ONT has the same internal hardware as the [Nokia G-010G-T](/ont-nokia-g-010g-t) and even the same plastic shell of the [ZTE F6005](/ont-zte-f6005). +This ONT has the same internal hardware as the [Nokia G-010G-T](/ont-nokia-g-010g-t) and even the same plastic shell of the [ZTE F6005](/ont-zte-f6005). diff --git a/_ont/ont-cig-g-97sp.md b/_ont/ont-cig-g-97sp.md new file mode 100644 index 0000000..2c69ffb --- /dev/null +++ b/_ont/ont-cig-g-97sp.md @@ -0,0 +1,32 @@ +--- +title: CIG G-97S +has_children: false +layout: default +parent: CIG +--- + +# Hardware Specifications + +| | | +| ----------- | --------------- | +| Vendor | CIG | +| Model | G-97S | +| Chipset | Lantiq PEB98035 | +| Manufacter | CIG | +| CPU | | +| CPU Clock | | +| Flash | | +| RAM | | +| HSGMII | | +| Optics | SC | +| IP address | | +| Web Gui | | +| SSH | | +| Form Factor | miniONT SFP | + + +# Miscellaneous Links + +- [GPON ONT G-95SP Platform Briefing](https://www.cigtech.com/wp-content/uploads/2018/03/G-95SP_DataSheet_V2.pdf) +- [Tech Info Depot Wiki](http://en.techinfodepot.shoutwiki.com/wiki/Cigtech_G-95SP) +- [OpenWrt Forum](https://forum.openwrt.org/t/cigtech-g-95sp-sfp-gpon/63352) diff --git a/_ont/ont-d-link-dpn-100-rev-c1.md b/_ont/ont-d-link-dpn-100-rev-c1.md index 553a528..58d1cab 100644 --- a/_ont/ont-d-link-dpn-100-rev-c1.md +++ b/_ont/ont-d-link-dpn-100-rev-c1.md @@ -13,7 +13,7 @@ parent: D-LINK | Model | DPN-100 Rev C1 | | Chipset | Realtek RTL9601CI | | Flash | | -| RAM | B | +| RAM | | | System | | | HSGMII | | | Optics | SC/APC | diff --git a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md index 669ba96..83da84c 100644 --- a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md +++ b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md @@ -274,123 +274,123 @@ The FS GPON-ONU-34-20BI stores the content of the emulated EEPROM in U-Boot env ### EEPROM0 layout -| address | size | name | default value | description | -| --------- | -------- | --------------------------------- | ------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | -| | | **BASE ID FIELDS (SFF-8472)** | | | -| 0 | 1 | Identifier | `0x03` (SFP) | Type of transceiver | -| 1 | 1 | Ext identifier | `0x04` (MOD_DEF 4) | Additional information about the transceiver | -| 2 | 1 | Connector | `0x01` (SC) | Type of media connector | -| 3-10 | 8 | Transceiver | `0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00` | Code for optical compatibility | -| 11 | 1 | Encoding | `0x03` (NRZ) | High speed serial encoding algorithm | -| 12 | 1 | Signaling Rate, Nominal | `0x0C` (1.244Gbps) | Nominal signaling rate | -| 13 | 1 | Rate Identifier | `0x00` (Not used) | Type of rate select functionality | -| 14 | 1 | Length (SMF,km) | `0x14` (20 km) | Link length supported for single-mode fiber, units of km | -| 15 | 1 | Length (SMF) | `0xC8` (200 x 100m) | Link length supported for single-mode fiber, units of 100 m | -| 16 | 1 | Length (50 um, OM2) | `0x00` (No support) | Link length supported for 50 um OM2 fiber, units of 10 m | -| 17 | 1 | Length (62.5 um, OM1) | `0x00` (No support) | Link length supported for 62.5 um OM1 fiber, units of 10 m | -| 18 | 1 | Length copper cable | `0x00` (No support) | Link length supported for copper or direct attach cable, units of m | -| 19 | 1 | Length (50 um, OM3) | `0x00` (No support) | Link length supported for 50 um OM3 fiber, units of 10 m | -| 20-35 | 16 | Vendor name | `0x46 0x53 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20` (FS) | SFP vendor name (ASCII) | -| 36 | 1 | Transceiver | `0x00` (No support) | Code for optical compatibility | -| 37-39 | 3 | Vendor OUI | `0x00 0x00 0x00` (No specified) | SFP vendor IEEE company ID | -| 40-55 | 16 | Vendor PN | `0x47 0x50 0x4F 0x4E 0x2D 0x4F 0x4E 0x55 0x2D 0x33 0x34 0x2D 0x32 0x30 0x42 0x49` (GPON-ONU-34-20BI) | Part number provided by SFP vendor (ASCII) | -| 56-59 | 4 | Vendor rev | `0x30 0x31 0x20 0x20` (01) | Revision level for part number provided by vendor (ASCII) | -| 60-61 | 2 | Wavelength | `0x05 0x1E` (1310nm TX) | Laser wavelength | -| 62 | 1 | Fibre Channel Speed 2 | `0x00` (No support) | Transceiver's Fibre Channel speed capabilities | -| 63 | 1 | CC_BASE | | Check code for Base ID Fields (addresses 0 to 62) | -| | | **EXTENDED ID FIELDS (SFF-8472)** | | | -| 64-65 | 2 | Options | `0x00 0x1A` (TX DISABLE, TX FAULT, RX LOS) | Indicates which optional transceiver signals are implemented | -| 66 | 1 | Signaling Rate, max | `0x00` (No specified) | Upper signaling rate margin, units of % | -| 67 | 1 | Signaling Rate, min | `0x00` (No specified) | Lower signaling rate margin, units of % | -| 68-83 | 16 | Vendor SN | Unique in each SFP | Serial number provided by vendor (ASCII) | -| 84-91 | 8 | Date code | Unique in each SFP | Vendor's manufacturing date code | -| 92 | 1 | Diagnostic Monitoring Type | `0x68` (Digital diagnostic, Internally calibrated, Received average power type) | Indicates which type of diagnostic monitoring is implemented | -| 93 | 1 | Enhanced Options | `0xF0` (Alarm/warning flags, soft TX_DISABLE control, soft TX_FAULT monitoring, soft RX_LOS monitoring) | Indicates which optional enhanced features are implemented | -| 94 | 1 | SFF-8472 Compliance | `0x05` (Rev 11.0 of SFF-8472) | Indicates which revision of SFF-8472 the transceiver complies with | -| 95 | 1 | CC_EXT | | Check code for the Extended ID Fields (addresses 64 to 94) | -| | | **VENDOR SPECIFIC FIELDS** | | | -| 96-127 | 32 | Vendor data | `0x20 0x20 0x20...` (Not used) | Vendor specifc data (ASCII) | -| 128-255 | 128 | Reserved | `0x00 0x00 0x00...` | Reserved | -| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** | -| 256-639 | 384 | Reserved | `0x00 0x00 0x00...` | Reserved | +| address | size | name | default value | description | +| ------- | ---- | --------------------------------- | ------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | +| | | **BASE ID FIELDS (SFF-8472)** | | | +| 0 | 1 | Identifier | `0x03` (SFP) | Type of transceiver | +| 1 | 1 | Ext identifier | `0x04` (MOD_DEF 4) | Additional information about the transceiver | +| 2 | 1 | Connector | `0x01` (SC) | Type of media connector | +| 3-10 | 8 | Transceiver | `0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00` | Code for optical compatibility | +| 11 | 1 | Encoding | `0x03` (NRZ) | High speed serial encoding algorithm | +| 12 | 1 | Signaling Rate, Nominal | `0x0C` (1.244Gbps) | Nominal signaling rate | +| 13 | 1 | Rate Identifier | `0x00` (Not used) | Type of rate select functionality | +| 14 | 1 | Length (SMF,km) | `0x14` (20 km) | Link length supported for single-mode fiber, units of km | +| 15 | 1 | Length (SMF) | `0xC8` (200 x 100m) | Link length supported for single-mode fiber, units of 100 m | +| 16 | 1 | Length (50 um, OM2) | `0x00` (No support) | Link length supported for 50 um OM2 fiber, units of 10 m | +| 17 | 1 | Length (62.5 um, OM1) | `0x00` (No support) | Link length supported for 62.5 um OM1 fiber, units of 10 m | +| 18 | 1 | Length copper cable | `0x00` (No support) | Link length supported for copper or direct attach cable, units of m | +| 19 | 1 | Length (50 um, OM3) | `0x00` (No support) | Link length supported for 50 um OM3 fiber, units of 10 m | +| 20-35 | 16 | Vendor name | `0x46 0x53 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20` (FS) | SFP vendor name (ASCII) | +| 36 | 1 | Transceiver | `0x00` (No support) | Code for optical compatibility | +| 37-39 | 3 | Vendor OUI | `0x00 0x00 0x00` (No specified) | SFP vendor IEEE company ID | +| 40-55 | 16 | Vendor PN | `0x47 0x50 0x4F 0x4E 0x2D 0x4F 0x4E 0x55 0x2D 0x33 0x34 0x2D 0x32 0x30 0x42 0x49` (GPON-ONU-34-20BI) | Part number provided by SFP vendor (ASCII) | +| 56-59 | 4 | Vendor rev | `0x30 0x31 0x20 0x20` (01) | Revision level for part number provided by vendor (ASCII) | +| 60-61 | 2 | Wavelength | `0x05 0x1E` (1310nm TX) | Laser wavelength | +| 62 | 1 | Fibre Channel Speed 2 | `0x00` (No support) | Transceiver's Fibre Channel speed capabilities | +| 63 | 1 | CC_BASE | | Check code for Base ID Fields (addresses 0 to 62) | +| | | **EXTENDED ID FIELDS (SFF-8472)** | | | +| 64-65 | 2 | Options | `0x00 0x1A` (TX DISABLE, TX FAULT, RX LOS) | Indicates which optional transceiver signals are implemented | +| 66 | 1 | Signaling Rate, max | `0x00` (No specified) | Upper signaling rate margin, units of % | +| 67 | 1 | Signaling Rate, min | `0x00` (No specified) | Lower signaling rate margin, units of % | +| 68-83 | 16 | Vendor SN | Unique in each SFP | Serial number provided by vendor (ASCII) | +| 84-91 | 8 | Date code | Unique in each SFP | Vendor's manufacturing date code | +| 92 | 1 | Diagnostic Monitoring Type | `0x68` (Digital diagnostic, Internally calibrated, Received average power type) | Indicates which type of diagnostic monitoring is implemented | +| 93 | 1 | Enhanced Options | `0xF0` (Alarm/warning flags, soft TX_DISABLE control, soft TX_FAULT monitoring, soft RX_LOS monitoring) | Indicates which optional enhanced features are implemented | +| 94 | 1 | SFF-8472 Compliance | `0x05` (Rev 11.0 of SFF-8472) | Indicates which revision of SFF-8472 the transceiver complies with | +| 95 | 1 | CC_EXT | | Check code for the Extended ID Fields (addresses 64 to 94) | +| | | **VENDOR SPECIFIC FIELDS** | | | +| 96-127 | 32 | Vendor data | `0x20 0x20 0x20...` (Not used) | Vendor specifc data (ASCII) | +| 128-255 | 128 | Reserved | `0x00 0x00 0x00...` | Reserved | +| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** | +| 256-639 | 384 | Reserved | `0x00 0x00 0x00...` | Reserved | ### EEPROM1 layout -| address | size | name | default value | description | -| --------- | -------- | --------------------------------- | ------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | -| | | **DIAGNOSTIC AND CONTROL FIELDS** | | | -| 0-1 | 2 | Temp High Alarm | `0x5F 0x00` (95℃) | | -| 2-3 | 2 | Temp Low Alarm | `0xCE 0x00` (-50℃) | | -| 4-5 | 2 | Temp High Warning | `0x5A 0x00` (90℃) | | -| 6-7 | 2 | Temp Low Warning | `0xD3 0x00` (-45℃) | | -| 8-9 | 2 | Voltage High Alarm | `0x8C 0xA0` (3.6V) | | -| 10-11 | 2 | Voltage Low Alarm | `0x75 0x30` (3.0V) | | -| 12-13 | 2 | Voltage High Warning | `0x88 0xB8` (3.5V) | | -| 14-15 | 2 | Voltage Low Warning | `0x79 0x18` (3.1V) | | -| 16-17 | 2 | Bias High Alarm | `0xAF 0xC8` (90mA) | | -| 18-19 | 2 | Bias Low Alarm | `0x00 0x00` (0mA) | | -| 20-21 | 2 | Bias High Warning | `0x88 0xB8` (70mA) | | -| 22-23 | 2 | Bias Low Warning | `0x00 0x00` (0mA) | | -| 24-25 | 2 | TX Power High Alarm | `0xF6 0x77` (8dBm) | Value expressed in watts subunits | -| 26-27 | 2 | TX Power Low Alarm | `0x15 0xF7` (-2.5dBm) | Value expressed in watts subunits | -| 28-29 | 2 | TX Power High Warning | `0xC3 0xC6` (7dBm) | Value expressed in watts subunits | -| 30-31 | 2 | TX Power Low Warning | `0x1B 0xA7` (-1.5dBm) | Value expressed in watts subunits | -| 32-33 | 2 | RX Power High Alarm | `0x0C 0x5A` (-5dBm) | Value expressed in watts subunits | -| 34-35 | 2 | RX Power Low Alarm | `0x00 0x08` (-31dBm) | Value expressed in watts subunits | -| 36-37 | 2 | RX Power High Warning | `0x09 0xCF` (-6dBm) | Value expressed in watts subunits | -| 38-39 | 2 | RX Power Low Warning | `0x00 0x0A` (-30dBm) | Value expressed in watts subunits | -| 40-45 | 6 | MAC address | Unique in each SFP | Contains the mac address of the SFP, it could also be empty | -| 46-55 | 10 | Reserved | `0x00 0x00 0x00...` | Reserved | -| 56-59 | 4 | RX_PWR(4) Calibration | `0x00 0x00 0x00 0x00` | 4th order RSSI calibration coefficient | -| 60-63 | 4 | RX_PWR(3) Calibration | `0x00 0x00 0x00 0x00` | 3rd order RSSI calibration coefficient | -| 64-67 | 4 | RX_PWR(2) Calibration | `0x00 0x00 0x00 0x00` | 2nd order RSSI calibration coefficient | -| 68-71 | 4 | RX_PWR(1) Calibration | `0x3F 0x80 0x00 0x00` | 1st order RSSI calibration coefficient | -| 72-75 | 4 | RX_PWR(0) Calibration | `0x00 0x00 0x00 0x00` | 0th order RSSI calibration coefficient | -| 76-77 | 2 | TX_I(Slope) Calibration | `0x01 0x00` | Slope for Bias calibration | -| 78-79 | 2 | TX_I(Offset) Calibration | `0x00 0x00` | Offset for Bias calibration | -| 80-81 | 2 | TX_PWR(Slope) Calibration | `0x01 0x00` | Slope for TX Power calibration | -| 82-83 | 2 | TX_PWR(Offset) Calibration | `0x00 0x00` | Offset for TX Power calibration | -| 84-85 | 2 | T(Slope) Calibration | `0x01 0x00` | Slope for Temperature calibration | -| 86-87 | 2 | T(Offset) Calibration | `0x00 0x00` | Offset for Temperature calibration, in units of 256ths °C | -| 88-89 | 2 | V(Slope) Calibration | `0x01 0x00` | Slope for VCC calibration | -| 90-91 | 2 | V(Offset) Calibration | `0x00 0x00` | Offset for VCC calibration | -| 92-94 | 3 | Reserved | `0x00 0x00 0x00` | Reserved | -| 95 | 1 | CC_DMI | | Check code for Base Diagnostic Fields (addresses 0 to 94) | -| 96 | 1 | Temperature MSB | | Internally measured module temperature | -| 97 | 1 | Temperature LSB | | | -| 98 | 1 | Vcc MSB | | Internally measured supply voltage in transceiver | -| 99 | 1 | Vcc LSB | | | -| 100 | 1 | TX Bias MSB | | Internally measured TX Bias Current | -| 101 | 1 | TX Bias LSB | | | -| 102 | 1 | TX Power MSB | | Measured TX output power | -| 103 | 1 | TX Power LSB | | | -| 104 | 1 | RX Power MSB | | Measured RX input power | -| 105 | 1 | RX Power LSB | | | -| 106-109 | 4 | Optional Diagnostics | `0xFF 0xFF 0xFF 0xFF` (No support) | Monitor Data for Optional Laser temperature and TEC current | -| 110 | 1 | Status/Control | `0x82` (Soft TX disable, disable laser, digital TX fault, digital RX LOS, power&data ready) | Optional Status and Control Bits | -| 111 | 1 | Reserved | `0x00` | Reserved | -| 112-113 | 2 | Alarm Flags | `0x01 0x40` | Diagnostic Alarm Flag Status Bits | -| 114 | 1 | Tx Input EQ control | `0xFF` (No support) | Tx Input equalization level control | -| 115 | 1 | Rx Out Emphasis control | `0xFF` (No support) | Rx Output emphasis level control | -| 116-117 | 2 | Warning Flags | `0x01 0x40` | Diagnostic Warning Flag Status Bits | -| 118-119 | 2 | Ext Status/Control | `0x00 0x00` (No support) | Extended module control and status bytes | -| | | **GENERAL USE FIELDS** | | | -| 120-126 | 7 | Vendor Specific | `0x70 0x00 0x00 0x00 0x00 0x00 0x00` | Vendor specific memory addresses | -| 127 | 1 | Table Select | `0x00` | Optional Page Select | -| | | **USER WRITABLE EEPROM** | | | -| 128-190 | 63 | Reserved | `0xFF 0xFF 0xFF...` | Reserved | -| 191-214 | 24 | GPON LOID or PLOAM | Depends on the configuration of the SFP | GPON Logical ONU ID or PLOAM, depends on `GPON LOID/PLOAM switch` | -| 215-231 | 17 | GPON LPWD | Depends on the configuration of the SFP | GPON Logical Password | -| 232 | 1 | GPON LOID/PLOAM switch | Depends on the configuration of the SFP | `0x01` to enable LOID, `0x02` to enable PLOAM | -| 233-240 | 8 | GPON SN | Unique in each SFP | GPON Serial Number (ME 256) | -| 241-247 | 7 | Reserved | `0xFF 0xFF 0xFF...` | Reserved | -| 248-255 | 8 | Vendor Control | `0xFF 0xFF 0xFF...` (Not used) | Vendor specific control functions | -| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** | -| 256-511 | 256 | Unknown vendor specific | | Probably not used in current SFPs | -| 512-531 | 20 | GPON Equipment ID | | GPON Equipment ID (ME 257), may not work in some firmwares | -| 532-535 | 4 | GPON Vendor ID | | GPON Vendor ID (ME 256 and more), may not work in some firmware | -| 536-639 | 104 | Reserved | | Reserved | +| address | size | name | default value | description | +| ------- | ---- | --------------------------------- | ------------------------------------------------------------------------------------------- | ----------------------------------------------------------------- | +| | | **DIAGNOSTIC AND CONTROL FIELDS** | | | +| 0-1 | 2 | Temp High Alarm | `0x5F 0x00` (95℃) | | +| 2-3 | 2 | Temp Low Alarm | `0xCE 0x00` (-50℃) | | +| 4-5 | 2 | Temp High Warning | `0x5A 0x00` (90℃) | | +| 6-7 | 2 | Temp Low Warning | `0xD3 0x00` (-45℃) | | +| 8-9 | 2 | Voltage High Alarm | `0x8C 0xA0` (3.6V) | | +| 10-11 | 2 | Voltage Low Alarm | `0x75 0x30` (3.0V) | | +| 12-13 | 2 | Voltage High Warning | `0x88 0xB8` (3.5V) | | +| 14-15 | 2 | Voltage Low Warning | `0x79 0x18` (3.1V) | | +| 16-17 | 2 | Bias High Alarm | `0xAF 0xC8` (90mA) | | +| 18-19 | 2 | Bias Low Alarm | `0x00 0x00` (0mA) | | +| 20-21 | 2 | Bias High Warning | `0x88 0xB8` (70mA) | | +| 22-23 | 2 | Bias Low Warning | `0x00 0x00` (0mA) | | +| 24-25 | 2 | TX Power High Alarm | `0xF6 0x77` (8dBm) | Value expressed in watts subunits | +| 26-27 | 2 | TX Power Low Alarm | `0x15 0xF7` (-2.5dBm) | Value expressed in watts subunits | +| 28-29 | 2 | TX Power High Warning | `0xC3 0xC6` (7dBm) | Value expressed in watts subunits | +| 30-31 | 2 | TX Power Low Warning | `0x1B 0xA7` (-1.5dBm) | Value expressed in watts subunits | +| 32-33 | 2 | RX Power High Alarm | `0x0C 0x5A` (-5dBm) | Value expressed in watts subunits | +| 34-35 | 2 | RX Power Low Alarm | `0x00 0x08` (-31dBm) | Value expressed in watts subunits | +| 36-37 | 2 | RX Power High Warning | `0x09 0xCF` (-6dBm) | Value expressed in watts subunits | +| 38-39 | 2 | RX Power Low Warning | `0x00 0x0A` (-30dBm) | Value expressed in watts subunits | +| 40-45 | 6 | MAC address | Unique in each SFP | Contains the mac address of the SFP, it could also be empty | +| 46-55 | 10 | Reserved | `0x00 0x00 0x00...` | Reserved | +| 56-59 | 4 | RX_PWR(4) Calibration | `0x00 0x00 0x00 0x00` | 4th order RSSI calibration coefficient | +| 60-63 | 4 | RX_PWR(3) Calibration | `0x00 0x00 0x00 0x00` | 3rd order RSSI calibration coefficient | +| 64-67 | 4 | RX_PWR(2) Calibration | `0x00 0x00 0x00 0x00` | 2nd order RSSI calibration coefficient | +| 68-71 | 4 | RX_PWR(1) Calibration | `0x3F 0x80 0x00 0x00` | 1st order RSSI calibration coefficient | +| 72-75 | 4 | RX_PWR(0) Calibration | `0x00 0x00 0x00 0x00` | 0th order RSSI calibration coefficient | +| 76-77 | 2 | TX_I(Slope) Calibration | `0x01 0x00` | Slope for Bias calibration | +| 78-79 | 2 | TX_I(Offset) Calibration | `0x00 0x00` | Offset for Bias calibration | +| 80-81 | 2 | TX_PWR(Slope) Calibration | `0x01 0x00` | Slope for TX Power calibration | +| 82-83 | 2 | TX_PWR(Offset) Calibration | `0x00 0x00` | Offset for TX Power calibration | +| 84-85 | 2 | T(Slope) Calibration | `0x01 0x00` | Slope for Temperature calibration | +| 86-87 | 2 | T(Offset) Calibration | `0x00 0x00` | Offset for Temperature calibration, in units of 256ths °C | +| 88-89 | 2 | V(Slope) Calibration | `0x01 0x00` | Slope for VCC calibration | +| 90-91 | 2 | V(Offset) Calibration | `0x00 0x00` | Offset for VCC calibration | +| 92-94 | 3 | Reserved | `0x00 0x00 0x00` | Reserved | +| 95 | 1 | CC_DMI | | Check code for Base Diagnostic Fields (addresses 0 to 94) | +| 96 | 1 | Temperature MSB | | Internally measured module temperature | +| 97 | 1 | Temperature LSB | | | +| 98 | 1 | Vcc MSB | | Internally measured supply voltage in transceiver | +| 99 | 1 | Vcc LSB | | | +| 100 | 1 | TX Bias MSB | | Internally measured TX Bias Current | +| 101 | 1 | TX Bias LSB | | | +| 102 | 1 | TX Power MSB | | Measured TX output power | +| 103 | 1 | TX Power LSB | | | +| 104 | 1 | RX Power MSB | | Measured RX input power | +| 105 | 1 | RX Power LSB | | | +| 106-109 | 4 | Optional Diagnostics | `0xFF 0xFF 0xFF 0xFF` (No support) | Monitor Data for Optional Laser temperature and TEC current | +| 110 | 1 | Status/Control | `0x82` (Soft TX disable, disable laser, digital TX fault, digital RX LOS, power&data ready) | Optional Status and Control Bits | +| 111 | 1 | Reserved | `0x00` | Reserved | +| 112-113 | 2 | Alarm Flags | `0x01 0x40` | Diagnostic Alarm Flag Status Bits | +| 114 | 1 | Tx Input EQ control | `0xFF` (No support) | Tx Input equalization level control | +| 115 | 1 | Rx Out Emphasis control | `0xFF` (No support) | Rx Output emphasis level control | +| 116-117 | 2 | Warning Flags | `0x01 0x40` | Diagnostic Warning Flag Status Bits | +| 118-119 | 2 | Ext Status/Control | `0x00 0x00` (No support) | Extended module control and status bytes | +| | | **GENERAL USE FIELDS** | | | +| 120-126 | 7 | Vendor Specific | `0x70 0x00 0x00 0x00 0x00 0x00 0x00` | Vendor specific memory addresses | +| 127 | 1 | Table Select | `0x00` | Optional Page Select | +| | | **USER WRITABLE EEPROM** | | | +| 128-190 | 63 | Reserved | `0xFF 0xFF 0xFF...` | Reserved | +| 191-214 | 24 | GPON LOID or PLOAM | Depends on the configuration of the SFP | GPON Logical ONU ID or PLOAM, depends on `GPON LOID/PLOAM switch` | +| 215-231 | 17 | GPON LPWD | Depends on the configuration of the SFP | GPON Logical Password | +| 232 | 1 | GPON LOID/PLOAM switch | Depends on the configuration of the SFP | `0x01` to enable LOID, `0x02` to enable PLOAM | +| 233-240 | 8 | GPON SN | Unique in each SFP | GPON Serial Number (ME 256) | +| 241-247 | 7 | Reserved | `0xFF 0xFF 0xFF...` | Reserved | +| 248-255 | 8 | Vendor Control | `0xFF 0xFF 0xFF...` (Not used) | Vendor specific control functions | +| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** | +| 256-511 | 256 | Unknown vendor specific | | Probably not used in current SFPs | +| 512-531 | 20 | GPON Equipment ID | | GPON Equipment ID (ME 257), may not work in some firmwares | +| 532-535 | 4 | GPON Vendor ID | | GPON Vendor ID (ME 256 and more), may not work in some firmware | +| 536-639 | 104 | Reserved | | Reserved | {% include alert.html content="For more information, see the SFF-8472 Rev 11.0 specification." alert="Info" icon="svg-info" color="blue" %} diff --git a/_ont/ont-genexis-ft-g2110c.md b/_ont/ont-genexis-ft-g2110c.md index 5d8242e..3adbcff 100644 --- a/_ont/ont-genexis-ft-g2110c.md +++ b/_ont/ont-genexis-ft-g2110c.md @@ -7,20 +7,20 @@ parent: Genexis # Hardware Specifications -| | | -| ----------- | ------------------------------------ | -| Vendor | Genexis | -| Model | FiberTwist G2110C-2.5G | -| Chipset | RTL9601D | -| Flash | 128MB | -| RAM | 32MB | -| System | Linux 3.18 (Luna SDK 3.3) | -| HSGMII | ✅ | -| Optics | SC/APC | -| IP address | 192.168.100.1/24 or 192.168.1.1/24 | +| | | +| ----------- | ------------------------------------------------------------ | +| Vendor | Genexis | +| Model | FiberTwist G2110C-2.5G | +| Chipset | RTL9601D | +| Flash | 128MB | +| RAM | 32MB | +| System | Linux 3.18 (Luna SDK 3.3) | +| 2.5GBaseT | Yes | +| Optics | SC/APC | +| IP address | 192.168.100.1/24 or 192.168.1.1/24 | | Web Gui | Can be enabled, locked down by iptables rule and missing CSS | -| Telnet | ✅ user `company`, password `amyM77yY` | -| Form Factor | ONT | +| Telnet | ✅ user `company`, password `amyM77yY` | +| Form Factor | ONT | # External/Internal Photo diff --git a/_ont/ont-halny-hl-gsfp.md b/_ont/ont-halny-hl-gsfp.md index 966e7f2..0ffc083 100644 --- a/_ont/ont-halny-hl-gsfp.md +++ b/_ont/ont-halny-hl-gsfp.md @@ -7,20 +7,22 @@ parent: Halny # Hardware Specifications -| | | -| ----------- | --------------- | -| Vendor | Halny | -| Model | HL-GSFP | -| Chipset | Lantiq PEB98035 | -| Flash | 8 MB | -| RAM | 64 MB | -| System | OpenWRT | -| HSGMII | Yes | -| Optics | SC/APC | -| IP address | | -| Web Gui | | -| SSH | | -| Form Factor | miniONT SFP | +| | | +| ----------- | -------------------- | +| Vendor | Halny | +| Model | HL-GSFP | +| Chipset | Lantiq PEB98035 | +| Flash | 8 MB | +| RAM | 64 MB | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | +| System | OpenWRT | +| HSGMII | Yes | +| Optics | SC/APC | +| IP address | | +| Web Gui | | +| SSH | | +| Form Factor | miniONT SFP | {% include image.html file="hl-gsfp-1.png" alt="Halny HL-GSFP top" caption="Halny HL-GSFP top" %} {% include image.html file="hl-gsfp-2.png" alt="Halny HL-GSFP bottom" caption="Halny HL-GSFP bottom" %} diff --git a/_ont/ont-hilink-hl23446.md b/_ont/ont-hilink-hl23446.md index 96ae5df..108886c 100644 --- a/_ont/ont-hilink-hl23446.md +++ b/_ont/ont-hilink-hl23446.md @@ -8,20 +8,22 @@ parent: Hilink # Hardware Specifications -| | | -| ----------- | ---------------------------- | -| Vendor | Hilink | -| Model | HL23446 | -| Chipset | Lantiq PEB98035 | -| Flash | 16 MB | -| RAM | 64 MB | -| System | OpenWRT | -| HSGMII | Yes | -| Optics | SC/APC | -| IP address | | -| Web Gui | ✅ | -| SSH | | -| Form Factor | miniONT SFP | +| | | +| ----------- | -------------------- | +| Vendor | Hilink | +| Model | HL23446 | +| Chipset | Lantiq PEB98035 | +| Flash | 16 MB | +| RAM | 64 MB | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | +| System | OpenWRT | +| HSGMII | Yes | +| Optics | SC/APC | +| IP address | | +| Web Gui | ✅ | +| SSH | | +| Form Factor | miniONT SFP | {% include image.html file="hl23446.png" alt="Hilink HL23446" caption="Hilink HL23446" %} diff --git a/_ont/ont-huawei-eg8010h.md b/_ont/ont-huawei-eg8010h.md new file mode 100644 index 0000000..cc4f3b9 --- /dev/null +++ b/_ont/ont-huawei-eg8010h.md @@ -0,0 +1,39 @@ +--- +title: Huawei EG8010H +has_children: false +layout: default +parent: Huawei +--- + +# Hardware Specifications + +| | | +| ----------- | ------------------------------------------------------------------------------------ | +| Vendor | Huawei | +| Model | EG8010H | +| Chipset | Hisilicon | +| Flash | 128MiB SLC NAND (DS35Q1GA-IB) | +| RAM | 256MiB | +| CPU | Hisilicon A9 dual core (ARMv7) | +| System | Dopra Linux | +| 2.5GBaseT | No | +| Optics | SC/APC and SC/UPC | +| IP address | 192.168.100.1 | +| Web Gui | ✅ user `root`, password `admin` or `adminHW` and user `Epadmin`, password `adminEp` | +| Telnet | After Enabling user `root`, password `admin` or `adminHW` | +| SSH | | +| Form Factor | ONT | + +## Hardware revisions +- v1: Horizontal PON port +- v2: Horizontal PON port +- v3: Vertical PON port +- v4: Vertical PON port +- v5: Vertical PON port +- v6: Vertical PON port + +## List of software versions + +- V5R020C10S035 + + diff --git a/_ont/ont-huawei-eg8010n.md b/_ont/ont-huawei-eg8010n.md new file mode 100644 index 0000000..90ad6fc --- /dev/null +++ b/_ont/ont-huawei-eg8010n.md @@ -0,0 +1,27 @@ +--- +title: Huawei EG8010H +has_children: false +layout: default +parent: Huawei +--- + +# Hardware Specifications + +| | | +| ----------- | ------- | +| Vendor | Huawei | +| Model | EG8010N | +| Chipset | | +| Flash | | +| RAM | | +| CPU | | +| System | | +| 2.5GBaseT | Yes | +| Optics | | +| IP address | | +| Web Gui | | +| Telnet | | +| SSH | | +| Form Factor | ONT | + + diff --git a/_ont/ont-huawei-hg8010h.md b/_ont/ont-huawei-hg8010h.md index 3a0ed9d..66c99b5 100644 --- a/_ont/ont-huawei-hg8010h.md +++ b/_ont/ont-huawei-hg8010h.md @@ -12,11 +12,11 @@ parent: Huawei | Vendor | Huawei | | Model | HG8010H | | Chipset | Hisilicon | -| Flash | 128MiB SLC NAND (DS35Q1GA-IB) | +| Flash | 128MiB (SLC NAND DS35Q1GA-IB) | | RAM | 256MiB | | CPU | Hisilicon A9 dual core (ARMv7) | | System | Dopra Linux | -| HSGMII | No | +| 2.5GBaseT | No | | Optics | SC/APC and SC/UPC | | IP address | 192.168.100.1 | | Web Gui | ✅ user `root`, password `admin` or `adminHW` and user `telecomadmin`, password `admintelecom` | diff --git a/_ont/ont-huawei-ma5671a.md b/_ont/ont-huawei-ma5671a.md index 4d53328..afc74f0 100644 --- a/_ont/ont-huawei-ma5671a.md +++ b/_ont/ont-huawei-ma5671a.md @@ -14,9 +14,11 @@ parent: Huawei | Chipset | Lantiq PEB98035 | | Manufacter | SourcePhotonics | | Flash | 16 MB | -| RAM | 64 MB | +| RAM | 64 MB (Winbond W25Q128FV) | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | | System | OpenWRT | -| HSGMII | Yes | +| HSGMII | ✅ | | Optics | SC/APC | | IP address | 192.168.1.10 | | Web Gui | After root | @@ -115,123 +117,123 @@ The Huawei MA5671A stores the content of the emulated EEPROM in U-Boot env varia ### EEPROM0 layout -| address | size | name | default value | description | -| --------- | -------- | --------------------------------- | ------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | -| | | **BASE ID FIELDS (SFF-8472)** | | | -| 0 | 1 | Identifier | `0x03` (SFP) | Type of transceiver | -| 1 | 1 | Ext identifier | `0x04` (MOD_DEF 4) | Additional information about the transceiver | -| 2 | 1 | Connector | `0x01` (SC) | Type of media connector | -| 3-10 | 8 | Transceiver | `0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00` | Code for optical compatibility | -| 11 | 1 | Encoding | `0x03` (NRZ) | High speed serial encoding algorithm | -| 12 | 1 | Signaling Rate, Nominal | `0x0C` (1.244Gbps) | Nominal signaling rate | -| 13 | 1 | Rate Identifier | `0x00` (Not used) | Type of rate select functionality | -| 14 | 1 | Length (SMF,km) | `0x14` (20 km) | Link length supported for single-mode fiber, units of km | -| 15 | 1 | Length (SMF) | `0xC8` (200 x 100m) | Link length supported for single-mode fiber, units of 100 m | -| 16 | 1 | Length (50 um, OM2) | `0x00` (No support) | Link length supported for 50 um OM2 fiber, units of 10 m | -| 17 | 1 | Length (62.5 um, OM1) | `0x00` (No support) | Link length supported for 62.5 um OM1 fiber, units of 10 m | -| 18 | 1 | Length copper cable | `0x00` (No support) | Link length supported for copper or direct attach cable, units of m | -| 19 | 1 | Length (50 um, OM3) | `0x00` (No support) | Link length supported for 50 um OM3 fiber, units of 10 m | -| 20-35 | 16 | Vendor name | `0x48 0x55 0x41 0x57 0x45 0x49 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 ` (HUAWEI) | SFP vendor name (ASCII) | -| 36 | 1 | Transceiver | `0x00` (No support) | Code for optical compatibility | -| 37-39 | 3 | Vendor OUI | `0x00 0x00 0x00` (No specified) | SFP vendor IEEE company ID | -| 40-55 | 16 | Vendor PN | `0x4D 0x41 0x35 0x36 0x37 0x31 0x41 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20` (MA5671A) | Part number provided by SFP vendor (ASCII) | -| 56-59 | 4 | Vendor rev | `0x30 0x30 0x30 0x30` (0000) | Revision level for part number provided by vendor (ASCII) | -| 60-61 | 2 | Wavelength | `0x05 0x1E` (1310nm TX) | Laser wavelength | -| 62 | 1 | Fibre Channel Speed 2 | `0x00` (No support) | Transceiver's Fibre Channel speed capabilities | -| 63 | 1 | CC_BASE | | Check code for Base ID Fields (addresses 0 to 62) | -| | | **EXTENDED ID FIELDS (SFF-8472)** | | | -| 64-65 | 2 | Options | `0x00 0x1A` (TX DISABLE, TX FAULT, RX LOS) | Indicates which optional transceiver signals are implemented | -| 66 | 1 | Signaling Rate, max | `0x00` (No specified) | Upper signaling rate margin, units of % | -| 67 | 1 | Signaling Rate, min | `0x00` (No specified) | Lower signaling rate margin, units of % | -| 68-83 | 16 | Vendor SN | Unique in each SFP | Serial number provided by vendor (ASCII) | -| 84-91 | 8 | Date code | Unique in each SFP | Vendor's manufacturing date code | -| 92 | 1 | Diagnostic Monitoring Type | `0x68` (Digital diagnostic, Internally calibrated, Received average power type) | Indicates which type of diagnostic monitoring is implemented | -| 93 | 1 | Enhanced Options | `0xE0` (Alarm/warning flags, soft TX_DISABLE control, soft TX_FAULT monitoring) | Indicates which optional enhanced features are implemented | -| 94 | 1 | SFF-8472 Compliance | `0x03` (Rev 10.2 of SFF-8472) | Indicates which revision of SFF-8472 the transceiver complies with | -| 95 | 1 | CC_EXT | | Check code for the Extended ID Fields (addresses 64 to 94) | -| | | **VENDOR SPECIFIC FIELDS** | | | -| 96-127 | 32 | Vendor data | Not sure if it's unique or not | Vendor specifc data (ASCII) | -| 128-255 | 128 | Reserved | `0x00 0x00 0x00...` | Reserved | -| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** | -| 256-639 | 384 | Reserved | `0x00 0x00 0x00...` | Reserved | +| address | size | name | default value | description | +| ------- | ---- | --------------------------------- | ------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | +| | | **BASE ID FIELDS (SFF-8472)** | | | +| 0 | 1 | Identifier | `0x03` (SFP) | Type of transceiver | +| 1 | 1 | Ext identifier | `0x04` (MOD_DEF 4) | Additional information about the transceiver | +| 2 | 1 | Connector | `0x01` (SC) | Type of media connector | +| 3-10 | 8 | Transceiver | `0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00` | Code for optical compatibility | +| 11 | 1 | Encoding | `0x03` (NRZ) | High speed serial encoding algorithm | +| 12 | 1 | Signaling Rate, Nominal | `0x0C` (1.244Gbps) | Nominal signaling rate | +| 13 | 1 | Rate Identifier | `0x00` (Not used) | Type of rate select functionality | +| 14 | 1 | Length (SMF,km) | `0x14` (20 km) | Link length supported for single-mode fiber, units of km | +| 15 | 1 | Length (SMF) | `0xC8` (200 x 100m) | Link length supported for single-mode fiber, units of 100 m | +| 16 | 1 | Length (50 um, OM2) | `0x00` (No support) | Link length supported for 50 um OM2 fiber, units of 10 m | +| 17 | 1 | Length (62.5 um, OM1) | `0x00` (No support) | Link length supported for 62.5 um OM1 fiber, units of 10 m | +| 18 | 1 | Length copper cable | `0x00` (No support) | Link length supported for copper or direct attach cable, units of m | +| 19 | 1 | Length (50 um, OM3) | `0x00` (No support) | Link length supported for 50 um OM3 fiber, units of 10 m | +| 20-35 | 16 | Vendor name | `0x48 0x55 0x41 0x57 0x45 0x49 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 ` (HUAWEI) | SFP vendor name (ASCII) | +| 36 | 1 | Transceiver | `0x00` (No support) | Code for optical compatibility | +| 37-39 | 3 | Vendor OUI | `0x00 0x00 0x00` (No specified) | SFP vendor IEEE company ID | +| 40-55 | 16 | Vendor PN | `0x4D 0x41 0x35 0x36 0x37 0x31 0x41 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20` (MA5671A) | Part number provided by SFP vendor (ASCII) | +| 56-59 | 4 | Vendor rev | `0x30 0x30 0x30 0x30` (0000) | Revision level for part number provided by vendor (ASCII) | +| 60-61 | 2 | Wavelength | `0x05 0x1E` (1310nm TX) | Laser wavelength | +| 62 | 1 | Fibre Channel Speed 2 | `0x00` (No support) | Transceiver's Fibre Channel speed capabilities | +| 63 | 1 | CC_BASE | | Check code for Base ID Fields (addresses 0 to 62) | +| | | **EXTENDED ID FIELDS (SFF-8472)** | | | +| 64-65 | 2 | Options | `0x00 0x1A` (TX DISABLE, TX FAULT, RX LOS) | Indicates which optional transceiver signals are implemented | +| 66 | 1 | Signaling Rate, max | `0x00` (No specified) | Upper signaling rate margin, units of % | +| 67 | 1 | Signaling Rate, min | `0x00` (No specified) | Lower signaling rate margin, units of % | +| 68-83 | 16 | Vendor SN | Unique in each SFP | Serial number provided by vendor (ASCII) | +| 84-91 | 8 | Date code | Unique in each SFP | Vendor's manufacturing date code | +| 92 | 1 | Diagnostic Monitoring Type | `0x68` (Digital diagnostic, Internally calibrated, Received average power type) | Indicates which type of diagnostic monitoring is implemented | +| 93 | 1 | Enhanced Options | `0xE0` (Alarm/warning flags, soft TX_DISABLE control, soft TX_FAULT monitoring) | Indicates which optional enhanced features are implemented | +| 94 | 1 | SFF-8472 Compliance | `0x03` (Rev 10.2 of SFF-8472) | Indicates which revision of SFF-8472 the transceiver complies with | +| 95 | 1 | CC_EXT | | Check code for the Extended ID Fields (addresses 64 to 94) | +| | | **VENDOR SPECIFIC FIELDS** | | | +| 96-127 | 32 | Vendor data | Not sure if it's unique or not | Vendor specifc data (ASCII) | +| 128-255 | 128 | Reserved | `0x00 0x00 0x00...` | Reserved | +| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** | +| 256-639 | 384 | Reserved | `0x00 0x00 0x00...` | Reserved | ### EEPROM1 layout -| address | size | name | default value | description | -| --------- | -------- | --------------------------------- | ------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | -| | | **DIAGNOSTIC AND CONTROL FIELDS** | | | -| 0-1 | 2 | Temp High Alarm | `0x5F 0x00` (95℃) | | -| 2-3 | 2 | Temp Low Alarm | `0xCE 0x00` (-50℃) | | -| 4-5 | 2 | Temp High Warning | `0x5A 0x00` (90℃) | | -| 6-7 | 2 | Temp Low Warning | `0xD3 0x00` (-45℃) | | -| 8-9 | 2 | Voltage High Alarm | `0x8C 0xA0` (3.6V) | | -| 10-11 | 2 | Voltage Low Alarm | `0x75 0x30` (3.0V) | | -| 12-13 | 2 | Voltage High Warning | `0x88 0xB8` (3.5V) | | -| 14-15 | 2 | Voltage Low Warning | `0x79 0x18` (3.1V) | | -| 16-17 | 2 | Bias High Alarm | `0xAF 0xC8` (90mA) | | -| 18-19 | 2 | Bias Low Alarm | `0x00 0x00` (0mA) | | -| 20-21 | 2 | Bias High Warning | `0x88 0xB8` (70mA) | | -| 22-23 | 2 | Bias Low Warning | `0x00 0x00` (0mA) | | -| 24-25 | 2 | TX Power High Alarm | `0x9B 0x82` (6dBm) | Value expressed in watts subunits | -| 26-27 | 2 | TX Power Low Alarm | `0x22 0xD0` (-1dBm) | Value expressed in watts subunits | -| 28-29 | 2 | TX Power High Warning | `0x7B 0x86` (5dBm) | Value expressed in watts subunits | -| 30-31 | 2 | TX Power Low Warning | `0x2B 0xD4` (0dBm) | Value expressed in watts subunits | -| 32-33 | 2 | RX Power High Alarm | `0x09 0xCF` (-6dBm) | Value expressed in watts subunits | -| 34-35 | 2 | RX Power Low Alarm | `0x00 0x0D` (-29dBm) | Value expressed in watts subunits | -| 36-37 | 2 | RX Power High Warning | `0x07 0xCB` (-7dBm) | Value expressed in watts subunits | -| 38-39 | 2 | RX Power Low Warning | `0x00 0x10` (-28dBm) | Value expressed in watts subunits | -| 40-45 | 6 | MAC address | Unique in each SFP | Contains the mac address of the SFP, it could also be empty | -| 46-55 | 10 | Reserved | `0x00 0x00 0x00...` | Reserved | -| 56-59 | 4 | RX_PWR(4) Calibration | `0x00 0x00 0x00 0x00` | 4th order RSSI calibration coefficient | -| 60-63 | 4 | RX_PWR(3) Calibration | `0x00 0x00 0x00 0x00` | 3rd order RSSI calibration coefficient | -| 64-67 | 4 | RX_PWR(2) Calibration | `0x00 0x00 0x00 0x00` | 2nd order RSSI calibration coefficient | -| 68-71 | 4 | RX_PWR(1) Calibration | `0x3F 0x80 0x00 0x00` | 1st order RSSI calibration coefficient | -| 72-75 | 4 | RX_PWR(0) Calibration | `0x00 0x00 0x00 0x00` | 0th order RSSI calibration coefficient | -| 76-77 | 2 | TX_I(Slope) Calibration | `0x01 0x00` | Slope for Bias calibration | -| 78-79 | 2 | TX_I(Offset) Calibration | `0x00 0x00` | Offset for Bias calibration | -| 80-81 | 2 | TX_PWR(Slope) Calibration | `0x01 0x00` | Slope for TX Power calibration | -| 82-83 | 2 | TX_PWR(Offset) Calibration | `0x00 0x00` | Offset for TX Power calibration | -| 84-85 | 2 | T(Slope) Calibration | `0x01 0x00` | Slope for Temperature calibration | -| 86-87 | 2 | T(Offset) Calibration | `0x00 0x00` | Offset for Temperature calibration, in units of 256ths °C | -| 88-89 | 2 | V(Slope) Calibration | `0x01 0x00` | Slope for VCC calibration | -| 90-91 | 2 | V(Offset) Calibration | `0x00 0x00` | Offset for VCC calibration | -| 92-94 | 3 | Reserved | `0x00 0x00 0x00` | Reserved | -| 95 | 1 | CC_DMI | | Check code for Base Diagnostic Fields (addresses 0 to 94) | -| 96 | 1 | Temperature MSB | | Internally measured module temperature | -| 97 | 1 | Temperature LSB | | | -| 98 | 1 | Vcc MSB | | Internally measured supply voltage in transceiver | -| 99 | 1 | Vcc LSB | | | -| 100 | 1 | TX Bias MSB | | Internally measured TX Bias Current | -| 101 | 1 | TX Bias LSB | | | -| 102 | 1 | TX Power MSB | | Measured TX output power | -| 103 | 1 | TX Power LSB | | | -| 104 | 1 | RX Power MSB | | Measured RX input power | -| 105 | 1 | RX Power LSB | | | -| 106-109 | 4 | Optional Diagnostics | `0xFF 0xFF 0xFF 0xFF` (No support) | Monitor Data for Optional Laser temperature and TEC current | -| 110 | 1 | Status/Control | `0x00` (No support) | Optional Status and Control Bits | -| 111 | 1 | Reserved | `0x00` | Reserved | -| 112-113 | 2 | Alarm Flags | `0x00 0x00` (No support) | Diagnostic Alarm Flag Status Bits | -| 114 | 1 | Tx Input EQ control | `0xFF` (No support) | Tx Input equalization level control | -| 115 | 1 | Rx Out Emphasis control | `0xFF` (No support) | Rx Output emphasis level control | -| 116-117 | 2 | Warning Flags | `0x00 0x00` (No support) | Diagnostic Warning Flag Status Bits | -| 118-119 | 2 | Ext Status/Control | `0x00 0x00` (No support) | Extended module control and status bytes | -| | | **GENERAL USE FIELDS** | | | -| 120-126 | 7 | Vendor Specific | `0x70 0x00 0x00 0x00 0x00 0x00 0x00` | Vendor specific memory addresses | -| 127 | 1 | Table Select | `0x00` | Optional Page Select | -| | | **USER WRITABLE EEPROM** | | | -| 128-190 | 63 | Reserved | `0xFF 0xFF 0xFF...` | Reserved | -| 191-214 | 24 | GPON LOID or PLOAM | Depends on the configuration of the SFP | GPON Logical ONU ID or PLOAM, depends on `GPON LOID/PLOAM switch` | -| 215-231 | 17 | GPON LPWD | Depends on the configuration of the SFP | GPON Logical Password | -| 232 | 1 | GPON LOID/PLOAM switch | Depends on the configuration of the SFP | `0x01` to enable LOID, `0x02` to enable PLOAM | -| 233-240 | 8 | GPON SN | Unique in each SFP | GPON Serial Number (ME 256) | -| 241-247 | 7 | Reserved | `0xFF 0xFF 0xFF...` | Reserved | -| 248-255 | 8 | Vendor Control | `0xFF 0xFF 0xFF...` (Not used) | Vendor specific control functions | -| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** | -| 256-511 | 256 | Unknown vendor specific | | Probably not used in current SFPs | -| 512-531 | 20 | GPON Equipment ID | | GPON Equipment ID (ME 257), may not work in some firmwares | -| 532-535 | 4 | GPON Vendor ID | | GPON Vendor ID (ME 256 and more), may not work in some firmware | -| 536-639 | 104 | Reserved | | Reserved | +| address | size | name | default value | description | +| ------- | ---- | --------------------------------- | --------------------------------------- | ----------------------------------------------------------------- | +| | | **DIAGNOSTIC AND CONTROL FIELDS** | | | +| 0-1 | 2 | Temp High Alarm | `0x5F 0x00` (95℃) | | +| 2-3 | 2 | Temp Low Alarm | `0xCE 0x00` (-50℃) | | +| 4-5 | 2 | Temp High Warning | `0x5A 0x00` (90℃) | | +| 6-7 | 2 | Temp Low Warning | `0xD3 0x00` (-45℃) | | +| 8-9 | 2 | Voltage High Alarm | `0x8C 0xA0` (3.6V) | | +| 10-11 | 2 | Voltage Low Alarm | `0x75 0x30` (3.0V) | | +| 12-13 | 2 | Voltage High Warning | `0x88 0xB8` (3.5V) | | +| 14-15 | 2 | Voltage Low Warning | `0x79 0x18` (3.1V) | | +| 16-17 | 2 | Bias High Alarm | `0xAF 0xC8` (90mA) | | +| 18-19 | 2 | Bias Low Alarm | `0x00 0x00` (0mA) | | +| 20-21 | 2 | Bias High Warning | `0x88 0xB8` (70mA) | | +| 22-23 | 2 | Bias Low Warning | `0x00 0x00` (0mA) | | +| 24-25 | 2 | TX Power High Alarm | `0x9B 0x82` (6dBm) | Value expressed in watts subunits | +| 26-27 | 2 | TX Power Low Alarm | `0x22 0xD0` (-1dBm) | Value expressed in watts subunits | +| 28-29 | 2 | TX Power High Warning | `0x7B 0x86` (5dBm) | Value expressed in watts subunits | +| 30-31 | 2 | TX Power Low Warning | `0x2B 0xD4` (0dBm) | Value expressed in watts subunits | +| 32-33 | 2 | RX Power High Alarm | `0x09 0xCF` (-6dBm) | Value expressed in watts subunits | +| 34-35 | 2 | RX Power Low Alarm | `0x00 0x0D` (-29dBm) | Value expressed in watts subunits | +| 36-37 | 2 | RX Power High Warning | `0x07 0xCB` (-7dBm) | Value expressed in watts subunits | +| 38-39 | 2 | RX Power Low Warning | `0x00 0x10` (-28dBm) | Value expressed in watts subunits | +| 40-45 | 6 | MAC address | Unique in each SFP | Contains the mac address of the SFP, it could also be empty | +| 46-55 | 10 | Reserved | `0x00 0x00 0x00...` | Reserved | +| 56-59 | 4 | RX_PWR(4) Calibration | `0x00 0x00 0x00 0x00` | 4th order RSSI calibration coefficient | +| 60-63 | 4 | RX_PWR(3) Calibration | `0x00 0x00 0x00 0x00` | 3rd order RSSI calibration coefficient | +| 64-67 | 4 | RX_PWR(2) Calibration | `0x00 0x00 0x00 0x00` | 2nd order RSSI calibration coefficient | +| 68-71 | 4 | RX_PWR(1) Calibration | `0x3F 0x80 0x00 0x00` | 1st order RSSI calibration coefficient | +| 72-75 | 4 | RX_PWR(0) Calibration | `0x00 0x00 0x00 0x00` | 0th order RSSI calibration coefficient | +| 76-77 | 2 | TX_I(Slope) Calibration | `0x01 0x00` | Slope for Bias calibration | +| 78-79 | 2 | TX_I(Offset) Calibration | `0x00 0x00` | Offset for Bias calibration | +| 80-81 | 2 | TX_PWR(Slope) Calibration | `0x01 0x00` | Slope for TX Power calibration | +| 82-83 | 2 | TX_PWR(Offset) Calibration | `0x00 0x00` | Offset for TX Power calibration | +| 84-85 | 2 | T(Slope) Calibration | `0x01 0x00` | Slope for Temperature calibration | +| 86-87 | 2 | T(Offset) Calibration | `0x00 0x00` | Offset for Temperature calibration, in units of 256ths °C | +| 88-89 | 2 | V(Slope) Calibration | `0x01 0x00` | Slope for VCC calibration | +| 90-91 | 2 | V(Offset) Calibration | `0x00 0x00` | Offset for VCC calibration | +| 92-94 | 3 | Reserved | `0x00 0x00 0x00` | Reserved | +| 95 | 1 | CC_DMI | | Check code for Base Diagnostic Fields (addresses 0 to 94) | +| 96 | 1 | Temperature MSB | | Internally measured module temperature | +| 97 | 1 | Temperature LSB | | | +| 98 | 1 | Vcc MSB | | Internally measured supply voltage in transceiver | +| 99 | 1 | Vcc LSB | | | +| 100 | 1 | TX Bias MSB | | Internally measured TX Bias Current | +| 101 | 1 | TX Bias LSB | | | +| 102 | 1 | TX Power MSB | | Measured TX output power | +| 103 | 1 | TX Power LSB | | | +| 104 | 1 | RX Power MSB | | Measured RX input power | +| 105 | 1 | RX Power LSB | | | +| 106-109 | 4 | Optional Diagnostics | `0xFF 0xFF 0xFF 0xFF` (No support) | Monitor Data for Optional Laser temperature and TEC current | +| 110 | 1 | Status/Control | `0x00` (No support) | Optional Status and Control Bits | +| 111 | 1 | Reserved | `0x00` | Reserved | +| 112-113 | 2 | Alarm Flags | `0x00 0x00` (No support) | Diagnostic Alarm Flag Status Bits | +| 114 | 1 | Tx Input EQ control | `0xFF` (No support) | Tx Input equalization level control | +| 115 | 1 | Rx Out Emphasis control | `0xFF` (No support) | Rx Output emphasis level control | +| 116-117 | 2 | Warning Flags | `0x00 0x00` (No support) | Diagnostic Warning Flag Status Bits | +| 118-119 | 2 | Ext Status/Control | `0x00 0x00` (No support) | Extended module control and status bytes | +| | | **GENERAL USE FIELDS** | | | +| 120-126 | 7 | Vendor Specific | `0x70 0x00 0x00 0x00 0x00 0x00 0x00` | Vendor specific memory addresses | +| 127 | 1 | Table Select | `0x00` | Optional Page Select | +| | | **USER WRITABLE EEPROM** | | | +| 128-190 | 63 | Reserved | `0xFF 0xFF 0xFF...` | Reserved | +| 191-214 | 24 | GPON LOID or PLOAM | Depends on the configuration of the SFP | GPON Logical ONU ID or PLOAM, depends on `GPON LOID/PLOAM switch` | +| 215-231 | 17 | GPON LPWD | Depends on the configuration of the SFP | GPON Logical Password | +| 232 | 1 | GPON LOID/PLOAM switch | Depends on the configuration of the SFP | `0x01` to enable LOID, `0x02` to enable PLOAM | +| 233-240 | 8 | GPON SN | Unique in each SFP | GPON Serial Number (ME 256) | +| 241-247 | 7 | Reserved | `0xFF 0xFF 0xFF...` | Reserved | +| 248-255 | 8 | Vendor Control | `0xFF 0xFF 0xFF...` (Not used) | Vendor specific control functions | +| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** | +| 256-511 | 256 | Unknown vendor specific | | Probably not used in current SFPs | +| 512-531 | 20 | GPON Equipment ID | | GPON Equipment ID (ME 257), may not work in some firmwares | +| 532-535 | 4 | GPON Vendor ID | | GPON Vendor ID (ME 256 and more), may not work in some firmware | +| 536-639 | 104 | Reserved | | Reserved | {% include alert.html content="For more information, see the SFF-8472 Rev 10.2 specification." alert="Info" icon="svg-info" color="blue" %} @@ -321,3 +323,5 @@ The following commands are used to clone image0 to image1 and then boot to it - [General setting of lantiq](https://forum.fibra.click/d/23881-ma5671a-e-vodafone-25-gbps/64) - [Manual and firmware for reflashing of HUAWEI MA5671A SFP module](https://github.com/nikbyte/huawei_ma5671a) - [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300) +- [Tech Info Depot Wiki](http://en.techinfodepot.shoutwiki.com/wiki/Huawei_MA5671A) + diff --git a/_ont/ont-leox-lxt-010g-d.md b/_ont/ont-leox-lxt-010g-d.md index 3d640f6..807cb45 100644 --- a/_ont/ont-leox-lxt-010g-d.md +++ b/_ont/ont-leox-lxt-010g-d.md @@ -15,7 +15,7 @@ parent: Leox | Flash | | | RAM | | | System | Linux (Luna SDK ) | -| HSGMII | No | +| 2.5GBaseT | No | | Optics | | | IP address | 192.168.100.1/24 | | Web Gui | | diff --git a/_ont/ont-leox-lxt-010h-d.md b/_ont/ont-leox-lxt-010h-d.md index eaa1b4b..2153cd1 100644 --- a/_ont/ont-leox-lxt-010h-d.md +++ b/_ont/ont-leox-lxt-010h-d.md @@ -14,8 +14,8 @@ parent: Leox | Chipset | RTL9601CI | | Flash | | | RAM | | -| System | Linux 3.18 (Luna SDK 3.3) | -| HSGMII | ✅ | +| System | Linux 3.18 (Luna SDK 3.3) | +| 2.5GBaseT | Yes | | Optics | | | IP address | 192.168.100.1/24 | | Web Gui | | diff --git a/_ont/ont-leox-lxt-010s-h.md b/_ont/ont-leox-lxt-010s-h.md index 5b4467b..d48d305 100644 --- a/_ont/ont-leox-lxt-010s-h.md +++ b/_ont/ont-leox-lxt-010s-h.md @@ -14,7 +14,8 @@ parent: Leox | Chipset | RTL9601CI | | Flash | 128MB | | RAM | 32MB | -| System | Linux 3.18 (Luna SDK 3.3) | +| Manufacter | Hisense LTE3415-SH+ | +| System | Linux 3.18 (Luna SDK 3.3) | | HSGMII | ✅ | | Optics | SC/UPC | | IP address | 192.168.100.1/24 | diff --git a/_ont/ont-nokia-g-010g-a.md b/_ont/ont-nokia-g-010g-a.md index 0904706..67b763f 100644 --- a/_ont/ont-nokia-g-010g-a.md +++ b/_ont/ont-nokia-g-010g-a.md @@ -16,7 +16,7 @@ parent: Nokia | Flash | | | RAM | | | System | | -| HSGMII | No | +| 2.5GBaseT | No | | Optics | SC/APC | | IP address | | | Web Gui | | diff --git a/_ont/ont-nokia-g-010g-p.md b/_ont/ont-nokia-g-010g-p.md index 7e7202f..a7b97fb 100644 --- a/_ont/ont-nokia-g-010g-p.md +++ b/_ont/ont-nokia-g-010g-p.md @@ -3,7 +3,7 @@ title: Nokia G-010G-P has_children: false layout: default parent: Nokia -alias: CIG G-97C1 +alias: CIG G-97C1/CIG G-97CU --- # Hardware Specifications @@ -17,7 +17,7 @@ alias: CIG G-97C1 | Flash | | | RAM | | | System | Linux (Luna SDK 1.9.0) | -| HSGMII | No | +| 2.5GBaseT | No | | Optics | SC/APC | | IP address | 192.168.100.1 (after a factory reset the ONT uses 10.89.42.157/16) | | Web Gui | ✅ user `admin`, password `1234` | @@ -49,6 +49,6 @@ To exit the shell and reach the parent menu type `exit` or `x`, in each menu the {% include_relative ont-nokia-userful-command.md %} # Miscellaneous Links -- MIB file parser for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) +- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) diff --git a/_ont/ont-nokia-g-010g-q.md b/_ont/ont-nokia-g-010g-q.md index aa052df..89d97e2 100644 --- a/_ont/ont-nokia-g-010g-q.md +++ b/_ont/ont-nokia-g-010g-q.md @@ -3,6 +3,7 @@ title: Nokia G-010G-Q has_children: false layout: default parent: Nokia +alias: CIG G-97CU --- # Hardware Specifications @@ -16,7 +17,7 @@ parent: Nokia | Flash | 16 MB (Winbond [W25Q128JV](https://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf) 3V SPI) | | RAM | DDR2 325MHz | | System | Linux (Luna SDK 1.9.0) | -| HSGMII | No | +| 2.5GBaseT | No | | Optics | SC/APC | | IP address | 192.168.100.1 | | Web Gui (HTTP) | ✅ Port 80 (⚠️ *only available when the PON connection **IS NOT** estabilished*) | @@ -69,6 +70,6 @@ ONT> {% include_relative ont-nokia-userful-command.md %} # Miscellaneous Links -- MIB file parser for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) +- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) diff --git a/_ont/ont-nokia-g-010g-r.md b/_ont/ont-nokia-g-010g-r.md index c4b64e0..941cbdc 100644 --- a/_ont/ont-nokia-g-010g-r.md +++ b/_ont/ont-nokia-g-010g-r.md @@ -16,7 +16,7 @@ parent: Nokia | Flash | 16MB | | RAM | 32MB | | System | Linux (Luna SDK 1.9.0) | -| HSGMII | ✅ | +| 2.5GBaseT | No | | Optics | SC/APC | | IP address | 192.168.100.1 (after a factory reset the ONT uses 10.89.42.157/16) | | Web Gui | ✅ user `admin`, password `1234` | @@ -47,3 +47,4 @@ The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be acc # Miscellaneous Links - [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) - [ispreview.co.uk](https://www.ispreview.co.uk/index.php/2022/09/pictured-openreachs-future-2-5gbps-ont-for-fttp-broadband.html) +- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) diff --git a/_ont/ont-nokia-g-010g-t.md b/_ont/ont-nokia-g-010g-t.md index c8ef9c9..a681a24 100644 --- a/_ont/ont-nokia-g-010g-t.md +++ b/_ont/ont-nokia-g-010g-t.md @@ -3,6 +3,7 @@ title: Nokia G-010G-T has_children: false layout: default parent: Nokia +alias: CIG G-97CP/G-97CU --- # Hardware Specifications @@ -16,7 +17,7 @@ parent: Nokia | Flash | 16MB | | RAM | 32MB | | System | Linux (Luna SDK 1.9.0) | -| HSGMII | ✅ | +| 2.5GBaseT | Yes | | Optics | SC/APC | | IP address | 192.168.100.1 (after a factory reset the ONT uses 10.89.42.157/16) | | Web Gui | ✅ user `admin`, password `1234` | @@ -53,5 +54,5 @@ The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be acc {% include_relative ont-nokia-userful-command.md %} # Miscellaneous Links -- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) +- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) - [ispreview.co.uk](https://www.ispreview.co.uk/index.php/2022/09/pictured-openreachs-future-2-5gbps-ont-for-fttp-broadband.html) diff --git a/_ont/ont-nokia-g-010s-a.md b/_ont/ont-nokia-g-010s-a.md index 98b861f..6ccaa70 100644 --- a/_ont/ont-nokia-g-010s-a.md +++ b/_ont/ont-nokia-g-010s-a.md @@ -15,6 +15,8 @@ parent: Nokia | Manufacter | SourcePhotonics | | Flash | 16 MB | | RAM | 64 MB | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | | System | OpenWRT | | HSGMII | Yes | | Optics | SC/UPC | diff --git a/_ont/ont-nokia-g-010s-b.md b/_ont/ont-nokia-g-010s-b.md index 5aac89c..0ae5785 100644 --- a/_ont/ont-nokia-g-010s-b.md +++ b/_ont/ont-nokia-g-010s-b.md @@ -12,9 +12,11 @@ parent: Nokia | Vendor | Nokia | | Model | G-010S-B | | Chipset | Lantiq PEB98035 | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | | Manufacter | SourcePhotonics | -| Flash | 16 MB | -| RAM | 64 MB | +| Flash | 16 MB (Macronix MX25L25635FZ2R-10G) | +| RAM | 64 MB (Winbond W9751G6KB-25I) | | System | OpenWRT | | HSGMII | Yes | | Optics | SC/UPC | @@ -78,4 +80,5 @@ uci set gpon.gtc.nDyingGaspEnable='0'; uci commit gpon - [G-010S-A](https://github.com/hwti/G-010S-A) - [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300) - [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC) +- [Tech Info Depot Wiki](http://en.techinfodepot.shoutwiki.com/wiki/Nokia_G-010S-B) diff --git a/_ont/ont-nokia-g-010s-p.md b/_ont/ont-nokia-g-010s-p.md index 7d0cacb..1810130 100644 --- a/_ont/ont-nokia-g-010s-p.md +++ b/_ont/ont-nokia-g-010s-p.md @@ -15,6 +15,8 @@ parent: Nokia | Manufacter | SourcePhotonics | | Flash | 16 MB | | RAM | 64 MB | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | | System | OpenWRT | | HSGMII | Yes | | Optics | SC/APC | diff --git a/_ont/ont-nokia-g-010s-q.md b/_ont/ont-nokia-g-010s-q.md index 389c9bd..6164589 100644 --- a/_ont/ont-nokia-g-010s-q.md +++ b/_ont/ont-nokia-g-010s-q.md @@ -39,5 +39,6 @@ alias: CIG G-97S - [Nokia G-010S-Q](https://github.com/Anime4000/RTL960x/issues/52) - [CUG G-97S DataSheet](https://www.cigtech.com/wp-content/uploads/2018/09/G-97S_DataSheet_V2.pdf) +- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*) diff --git a/_ont/ont-odi-zte-dfp-34x-2c2.md b/_ont/ont-odi-zte-dfp-34x-2c2.md index 225ac19..52bfd26 100644 --- a/_ont/ont-odi-zte-dfp-34x-2c2.md +++ b/_ont/ont-odi-zte-dfp-34x-2c2.md @@ -18,7 +18,7 @@ parent: ODI | Flash | 16 MB | | RAM | 32 MB | | System | System ZTE Linux | -| HSGMII | | +| HSGMII | No | | Optics | | | IP address | | | Web Gui | ✅ | diff --git a/_ont/ont-technicolor-afm0002.md b/_ont/ont-technicolor-afm0002.md index b2920e6..fba2f58 100644 --- a/_ont/ont-technicolor-afm0002.md +++ b/_ont/ont-technicolor-afm0002.md @@ -16,7 +16,7 @@ alias: Hisense LTE3415-SCA+ | Flash | 32 MB | | RAM | | | System | Linux (Luna SDK) | -| HSGMII | NO | +| HSGMII | No | | Optics | | | IP address | 192.168.2.1 / 169.0.0.1 | | Web Gui | Can be enabled, user `admin`, password `system` | diff --git a/_ont/ont-technicolor-afm0003.md b/_ont/ont-technicolor-afm0003.md index 0c9f753..f57689d 100644 --- a/_ont/ont-technicolor-afm0003.md +++ b/_ont/ont-technicolor-afm0003.md @@ -16,7 +16,7 @@ alias: Hisense LTE3415-SH+ | Flash | 256 MB | | RAM | | | System | Linux 2.6 (Luna SDK 1.9) | -| HSGMII | | +| HSGMII | Yes, but not working with stock firmware | | Optics | | | IP address | 192.168.2.1 | | Web Gui | Can be enabled, user `admin`, password `system` | diff --git a/_ont/ont-tplink-xz000-g3.md b/_ont/ont-tplink-xz000-g3.md index d7e253a..00a253c 100644 --- a/_ont/ont-tplink-xz000-g3.md +++ b/_ont/ont-tplink-xz000-g3.md @@ -16,7 +16,7 @@ parent: TP-Link | Flash | | | RAM | | | System | TCLinux | -| HSGMII | NO | +| HSGMII | No | | Optics | SC/APC | | IP address | 192.168.1.1 | | Web Gui | ✅ username `admin`, password `admin` | diff --git a/_ont/ont-ziza-op151s.md b/_ont/ont-ziza-op151s.md index b440bf8..f31af5f 100644 --- a/_ont/ont-ziza-op151s.md +++ b/_ont/ont-ziza-op151s.md @@ -1,7 +1,30 @@ --- title: Ziza OP151S has_children: false -redirect_to: /ont-zyxel-pmg3000-d20b layout: default parent: Ziza ---- \ No newline at end of file +--- + +# Hardware Specifications + +| | | +| ----------- | ---------------------------------------------------------- | +| Vendor | Ziza | +| Model | OP151S | +| Chipset | Lantiq PEB98035 | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | +| Flash | 8 MB (GigaDevice GD25Q64CW16) | +| RAM | 64 MB (Nanya NT5TU32M16FG-AC1) | +| System | OpenWRT | +| HSGMII | Yes | +| Optics | SC/APC | +| IP address | 10.10.1.1 | +| Web Gui | ✅ username `admin` or `guest`, password `1234` or `guest` | +| SSH | ✅ username `admin`, password `admin` | +| Form Factor | miniONT SFP | + +# Miscellaneous Links + +- [Tech Info Depot Wiki](http://en.techinfodepot.shoutwiki.com/wiki/ZISA_OP151S) + diff --git a/_ont/ont-zte-f6005.md b/_ont/ont-zte-f6005.md index 76c399d..3f5b6de 100644 --- a/_ont/ont-zte-f6005.md +++ b/_ont/ont-zte-f6005.md @@ -16,7 +16,7 @@ parent: ZTE | Flash | | | RAM | | | System | Linux (Luna SDK 1.9.0) | -| HSGMII | Yes | +| 2.5GBaseT | Yes | | Optics | SC/APC | | IP address | 192.168.1.1 | | Web Gui | ✅ user `admin`, password `admin` | diff --git a/_ont/ont-zte-f601.md b/_ont/ont-zte-f601.md index f1fc6fa..8b5c220 100644 --- a/_ont/ont-zte-f601.md +++ b/_ont/ont-zte-f601.md @@ -7,38 +7,26 @@ parent: ZTE # Hardware Specifications -| | | | | | -| ----------- | ----------------------------------------------------------------- | ----------------------------------------------------------------- | ----------- | ------ | -| Vendor | ZTE | ZTE | ZTE | ZTE | -| Model | F601v6 | F601v7 | F601v8 | F601v9 | -| CPU | ZTE FA626TE | ZTE ZX279125@A9 | | | -| CPU Clock | 266 MHz | 600 MHz | | | -| Chipset | ZTE FA626TE | ZTE ZX279125@A9 | | | -| Flash | 16 MB | 16 MB | | | -| RAM | 64 MB | 32 MB | | | -| System | | | | | -| HSGMII | No | No | No | No | -| Optics | SC/APC or SC/UPC | SC/APC | SC/APC | SC/APC | -| IP address | 192.168.1.1 | 192.168.1.1 | 192.168.1.1 | | -| Web Gui | ✅ user `admin`, password `admin` or user `user`, password `user` | ✅ user `admin`, password `admin` or user `user`, password `user` | | | -| SSH | | | | | -| Form Factor | ONT | ONT | | | +| | | | | | +| ----------- | ----------------------------------------------------------------- | ----------------------------------------------------------------- | ----------- | ------------------------- | +| Vendor | ZTE | ZTE | ZTE | ZTE | +| Model | F601v6 | F601v7 | F601v8 | F601v9 | +| CPU | ZTE FA626TE | ZTE ZX279125@A9 | | ZX279127S | +| CPU Clock | 266 MHz | 600 MHz | | | +| Chipset | ZTE FA626TE | ZTE ZX279125@A9 | | | +| Flash | 16 MB (SPI Flash w25q128) | 16 MB (SPI Flash mx25l12805d) | | | +| RAM | 64 MB | 32 MB | | 128 MB (ESMT M15T1G1664A) | +| System | | | | | +| 2.5GBaseT | No | No | No | No | +| Optics | SC/APC or SC/UPC | SC/APC | SC/APC | SC/APC | +| IP address | 192.168.1.1 | 192.168.1.1 | 192.168.1.1 | | +| Web Gui | ✅ user `admin`, password `admin` or user `user`, password `user` | ✅ user `admin`, password `admin` or user `user`, password `user` | | | +| SSH | | | | | +| Form Factor | ONT | ONT | | | {% include image.html file="f601_v6_1.jpg" alt="F601 v6" caption="F601 v6" %} {% include image.html file="f601_v7.jpg" alt="F601 v7" caption="A wall made out of broken F601 v7s" %} -{% include image.html file="f601_v8.jpg" alt="F601 v9" caption="F601 v9 @ftthless" %} - - -## Hardware revisions -- v6: big -* CPU: ZTE FA626TE 266 MHz -* RAM: 64 MiB -* ROM: SPI Flash w25q128 16 MiB -- v7: small, Huawei HG8010H-like exterior, some production batches have self-destruction functionality -* CPU: ZTE ZX279125@A9,600MHZ -* RAM: 32 MiB -* ROM: SPI Flash mx25l12805d 16 MiB -- v8: small, Huawei HG8010H-like exterior +{% include image.html file="f601v9/front.jpg" alt="F601 v9" caption="F601 v9 @mirko991" %} ## List of software versions ### HW V6.0 @@ -83,6 +71,16 @@ parent: ZTE {% include image.html file="f601_v7_teardown_3.jpg" alt="Teardown of the F601 v7" caption="Teardown of the F601 v7 @LATIITAY" %} {% include image.html file="f601_v7_teardown_4.jpg" alt="Teardown of the F601 v7" caption="Teardown of the F601 v7 @LATIITAY" %} +## HW V9.0 +mirko991 +{% include image.html file="f601v9/front.jpg" alt="Front of the F601 v9" caption="Bottom of the F601 v6 @mirko991" %} +{% include image.html file="f601v9/back.jpg" alt="Bottom of the F601 v9" caption="Bottom of the F601 v6 @mirko991" %} +{% include image.html file="f601v9/teardown-1.jpg" alt="Teardown of the F601 v7" caption="Teardown of the F601 v9 @mirko991" %} +{% include image.html file="f601v9/teardown-2.jpg" alt="Teardown of the F601 v7" caption="Teardown of the F601 v9 @mirko991" %} +{% include image.html file="f601v9/teardown-3.jpg" alt="Teardown of the F601 v7" caption="Teardown of the F601 v9 @mirko991" %} + + + # Miscellaneous Links - [Usource GPON ONU STICK](https://www.usourcetech.com/web/userfiles/download/GPONSTICKSFPCLASSB-2B_Rev01.pdf) diff --git a/_ont/ont-zyxel-pmg3000-d20b.md b/_ont/ont-zyxel-pmg3000-d20b.md index 2e75f66..916dfae 100644 --- a/_ont/ont-zyxel-pmg3000-d20b.md +++ b/_ont/ont-zyxel-pmg3000-d20b.md @@ -8,20 +8,22 @@ parent: Zyxel # Hardware Specifications -| | | -| ----------- | ----------------------------------------------- | -| Vendor | Zyxel | -| Model | PMG3000-D20B | -| Chipset | Lantiq PEB98035 | -| Flash | 8 MB | -| RAM | 64 MB | -| System | OpenWRT | -| HSGMII | Yes | -| Optics | SC/APC | -| IP address | 10.10.1.1 | +| | | +| ----------- | ---------------------------------------------------------- | +| Vendor | Zyxel | +| Model | PMG3000-D20B | +| Chipset | Lantiq PEB98035 | +| Flash | 8 MB | +| RAM | 64 MB | +| CPU | MIPS 34Kc interAptiv | +| CPU Clock | 400MHz | +| System | OpenWRT | +| HSGMII | Yes | +| Optics | SC/APC | +| IP address | 10.10.1.1 | | Web Gui | ✅ username `admin` or `guest`, password `1234` or `guest` | -| SSH | ✅ username `admin`, password `admin` | -| Form Factor | miniONT SFP | +| SSH | ✅ username `admin`, password `admin` | +| Form Factor | miniONT SFP | {% include image.html file="pmg3000-d20b.png" alt="PMG3000-D20B" caption="PMG3000-D20B" %} {% include image.html file="op151s.png" alt="Ziza OP151S" caption="Ziza OP151S" %} @@ -183,111 +185,111 @@ The Zyxel PMG3000-D20B stores the content of the emulated EEPROM1 (A2h) in `/tmp ### EEPROM0 layout -| address | size | name | default value | description | -| --------- | -------- | --------------------------------- | ------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | -| | | **BASE ID FIELDS (SFF-8472)** | | | -| 0 | 1 | Identifier | `0x03` (SFP) | Type of transceiver | -| 1 | 1 | Ext identifier | `0x04` (MOD_DEF 4) | Additional information about the transceiver | -| 2 | 1 | Connector | `0x01` (SC) | Type of media connector | -| 3-10 | 8 | Transceiver | `0x04 0x40 0x00 0x02 0x12 0x10 0x00 0x80` (1X LX, 1310TX SMF, 1000BASE-LX, 1200 Mbps) | Code for optical compatibility | -| 11 | 1 | Encoding | `0x03` (8B/10B) | High speed serial encoding algorithm | -| 12 | 1 | Signaling Rate, Nominal | `0x0C` (1Gbps) | Nominal signaling rate | -| 13 | 1 | Rate Identifier | `0x00` (Not used) | Type of rate select functionality | -| 14 | 1 | Length (SMF,km) | `0x14` (20 km) | Link length supported for single-mode fiber, units of km | -| 15 | 1 | Length (SMF) | `0xC8` (200 x 100m) | Link length supported for single-mode fiber, units of 100 m | -| 16 | 1 | Length (50 um, OM2) | `0xFF` (No support) | Link length supported for 50 um OM2 fiber, units of 10 m | -| 17 | 1 | Length (62.5 um, OM1) | `0xFF` (No support) | Link length supported for 62.5 um OM1 fiber, units of 10 m | -| 18 | 1 | Length copper cable | `0x00` (No support) | Link length supported for copper or direct attach cable, units of m | -| 19 | 1 | Length (50 um, OM3) | `0xFF` (No support) | Link length supported for 50 um OM3 fiber, units of 10 m | -| 20-35 | 16 | Vendor name | `0x4C 0x61 0x6E 0x74 0x69 0x71 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20` (Lantiq) | SFP vendor name (ASCII) | -| 36 | 1 | Transceiver | `0x00` (No support) | Code for optical compatibility | -| 37-39 | 3 | Vendor OUI | `0x00 0x1C 0xAD` | SFP vendor IEEE company ID | -| 40-55 | 16 | Vendor PN | `0x50 0x61 0x72 0x74 0x20 0x4E 0x75 0x6D 0x62 0x65 0x72 0x20 0x20 0x20 0x20 0x20` (Part Number) | Part number provided by SFP vendor (ASCII) | -| 56-59 | 4 | Vendor rev | `0x30 0x30 0x30 0x30` (0000) | Revision level for part number provided by vendor (ASCII) | -| 60-61 | 2 | Wavelength | `0x05 0x1E` (1310nm TX) | Laser wavelength | -| 62 | 1 | Fibre Channel Speed 2 | `0xFF` (No support) | Transceiver's Fibre Channel speed capabilities | -| 63 | 1 | CC_BASE | | Check code for Base ID Fields (addresses 0 to 62) | -| | | **EXTENDED ID FIELDS (SFF-8472)** | | | -| 64-65 | 2 | Options | `0x00 0x1A` (TX DISABLE, TX FAULT, RX LOS) | Indicates which optional transceiver signals are implemented | -| 66 | 1 | Signaling Rate, max | `0x00` (No specified) | Upper signaling rate margin, units of % | -| 67 | 1 | Signaling Rate, min | `0x00` (No specified) | Lower signaling rate margin, units of % | -| 68-83 | 16 | Vendor SN | `0x6E 0x6F 0x20 0x73 0x65 0x72 0x69 0x61 0x6C 0x20 0x6E 0x75 0x6D 0x62 0x65 0x72` (no serial number) | Serial number provided by vendor (ASCII) | -| 84-91 | 8 | Date code | `0x31 0x33 0x30 0x31 0x30 0x31 0x20 0x20` (130101) | Vendor's manufacturing date code | -| 92 | 1 | Diagnostic Monitoring Type | `0x6C` (Digital diagnostic, Internally calibrated, Received average power type, address change) | Indicates which type of diagnostic monitoring is implemented | -| 93 | 1 | Enhanced Options | `0xF0` (Alarm/warning flags, soft TX_DISABLE control, soft TX_FAULT monitoring, soft RX_LOS monitoring) | Indicates which optional enhanced features are implemented | -| 94 | 1 | SFF-8472 Compliance | `0x05` (Rev 11.0 of SFF-8472) | Indicates which revision of SFF-8472 the transceiver complies with | -| 95 | 1 | CC_EXT | | Check code for the Extended ID Fields (addresses 64 to 94) | -| | | **VENDOR SPECIFIC FIELDS** | | | -| 96-127 | 32 | Vendor data | `0x20 0x20 0x20...` (Not used) | Vendor specifc data (ASCII) | -| 128-255 | 128 | Reserved | `0x00 0x00 0x00...` | Reserved | +| address | size | name | default value | description | +| ------- | ---- | --------------------------------- | ------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | +| | | **BASE ID FIELDS (SFF-8472)** | | | +| 0 | 1 | Identifier | `0x03` (SFP) | Type of transceiver | +| 1 | 1 | Ext identifier | `0x04` (MOD_DEF 4) | Additional information about the transceiver | +| 2 | 1 | Connector | `0x01` (SC) | Type of media connector | +| 3-10 | 8 | Transceiver | `0x04 0x40 0x00 0x02 0x12 0x10 0x00 0x80` (1X LX, 1310TX SMF, 1000BASE-LX, 1200 Mbps) | Code for optical compatibility | +| 11 | 1 | Encoding | `0x03` (8B/10B) | High speed serial encoding algorithm | +| 12 | 1 | Signaling Rate, Nominal | `0x0C` (1Gbps) | Nominal signaling rate | +| 13 | 1 | Rate Identifier | `0x00` (Not used) | Type of rate select functionality | +| 14 | 1 | Length (SMF,km) | `0x14` (20 km) | Link length supported for single-mode fiber, units of km | +| 15 | 1 | Length (SMF) | `0xC8` (200 x 100m) | Link length supported for single-mode fiber, units of 100 m | +| 16 | 1 | Length (50 um, OM2) | `0xFF` (No support) | Link length supported for 50 um OM2 fiber, units of 10 m | +| 17 | 1 | Length (62.5 um, OM1) | `0xFF` (No support) | Link length supported for 62.5 um OM1 fiber, units of 10 m | +| 18 | 1 | Length copper cable | `0x00` (No support) | Link length supported for copper or direct attach cable, units of m | +| 19 | 1 | Length (50 um, OM3) | `0xFF` (No support) | Link length supported for 50 um OM3 fiber, units of 10 m | +| 20-35 | 16 | Vendor name | `0x4C 0x61 0x6E 0x74 0x69 0x71 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20` (Lantiq) | SFP vendor name (ASCII) | +| 36 | 1 | Transceiver | `0x00` (No support) | Code for optical compatibility | +| 37-39 | 3 | Vendor OUI | `0x00 0x1C 0xAD` | SFP vendor IEEE company ID | +| 40-55 | 16 | Vendor PN | `0x50 0x61 0x72 0x74 0x20 0x4E 0x75 0x6D 0x62 0x65 0x72 0x20 0x20 0x20 0x20 0x20` (Part Number) | Part number provided by SFP vendor (ASCII) | +| 56-59 | 4 | Vendor rev | `0x30 0x30 0x30 0x30` (0000) | Revision level for part number provided by vendor (ASCII) | +| 60-61 | 2 | Wavelength | `0x05 0x1E` (1310nm TX) | Laser wavelength | +| 62 | 1 | Fibre Channel Speed 2 | `0xFF` (No support) | Transceiver's Fibre Channel speed capabilities | +| 63 | 1 | CC_BASE | | Check code for Base ID Fields (addresses 0 to 62) | +| | | **EXTENDED ID FIELDS (SFF-8472)** | | | +| 64-65 | 2 | Options | `0x00 0x1A` (TX DISABLE, TX FAULT, RX LOS) | Indicates which optional transceiver signals are implemented | +| 66 | 1 | Signaling Rate, max | `0x00` (No specified) | Upper signaling rate margin, units of % | +| 67 | 1 | Signaling Rate, min | `0x00` (No specified) | Lower signaling rate margin, units of % | +| 68-83 | 16 | Vendor SN | `0x6E 0x6F 0x20 0x73 0x65 0x72 0x69 0x61 0x6C 0x20 0x6E 0x75 0x6D 0x62 0x65 0x72` (no serial number) | Serial number provided by vendor (ASCII) | +| 84-91 | 8 | Date code | `0x31 0x33 0x30 0x31 0x30 0x31 0x20 0x20` (130101) | Vendor's manufacturing date code | +| 92 | 1 | Diagnostic Monitoring Type | `0x6C` (Digital diagnostic, Internally calibrated, Received average power type, address change) | Indicates which type of diagnostic monitoring is implemented | +| 93 | 1 | Enhanced Options | `0xF0` (Alarm/warning flags, soft TX_DISABLE control, soft TX_FAULT monitoring, soft RX_LOS monitoring) | Indicates which optional enhanced features are implemented | +| 94 | 1 | SFF-8472 Compliance | `0x05` (Rev 11.0 of SFF-8472) | Indicates which revision of SFF-8472 the transceiver complies with | +| 95 | 1 | CC_EXT | | Check code for the Extended ID Fields (addresses 64 to 94) | +| | | **VENDOR SPECIFIC FIELDS** | | | +| 96-127 | 32 | Vendor data | `0x20 0x20 0x20...` (Not used) | Vendor specifc data (ASCII) | +| 128-255 | 128 | Reserved | `0x00 0x00 0x00...` | Reserved | ### EEPROM1 layout -| address | size | name | default value | description | -| --------- | -------- | --------------------------------- | ------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- | -| | | **DIAGNOSTIC AND CONTROL FIELDS** | | | -| 0-1 | 2 | Temp High Alarm | `0x64 0x00` (100℃) | | -| 2-3 | 2 | Temp Low Alarm | `0xCE 0x00` (-50℃) | | -| 4-5 | 2 | Temp High Warning | `0x55 0x00` (85℃) | | -| 6-7 | 2 | Temp Low Warning | `0xD8 0x00` (-40℃) | | -| 8-9 | 2 | Voltage High Alarm | `0x8C 0xA0` (3.6V) | | -| 10-11 | 2 | Voltage Low Alarm | `0x75 0x30` (3.0V) | | -| 12-13 | 2 | Voltage High Warning | `0x88 0xB8` (3.5V) | | -| 14-15 | 2 | Voltage Low Warning | `0x79 0x18` (3.1V) | | -| 16-17 | 2 | Bias High Alarm | `0xAF 0xC8` (90mA) | | -| 18-19 | 2 | Bias Low Alarm | `0x00 0x00` (0mA) | | -| 20-21 | 2 | Bias High Warning | `0x88 0xB8` (70mA) | | -| 22-23 | 2 | Bias Low Warning | `0x00 0x00` (0mA) | | -| 24-25 | 2 | TX Power High Alarm | `0x7B 0x86` (5dBm) | Value expressed in watts subunits | -| 26-27 | 2 | TX Power Low Alarm | `0x27 0x10` (0dBm) | Value expressed in watts subunits | -| 28-29 | 2 | TX Power High Warning | `0x6E 0x17` (4dBm) | Value expressed in watts subunits | -| 30-31 | 2 | TX Power Low Warning | `0x2B 0xD4` (0.1dBm) | Value expressed in watts subunits | -| 32-33 | 2 | RX Power High Alarm | `0x07 0xCB` (-7dBm) | Value expressed in watts subunits | -| 34-35 | 2 | RX Power Low Alarm | `0x00 0x0F` (-28dBm) | Value expressed in watts subunits | -| 36-37 | 2 | RX Power High Warning | `0x06 0x30` (-8dBm) | Value expressed in watts subunits | -| 38-39 | 2 | RX Power Low Warning | `0x00 0x14` (-27dBm) | Value expressed in watts subunits | -| 40-55 | 16 | Reserved | `0x00 0x00 0x00...` | Contains the mac address of the SFP, it could also be empty | -| 56-59 | 4 | RX_PWR(4) Calibration | `0x00 0x00 0x00 0x00` | 4th order RSSI calibration coefficient | -| 60-63 | 4 | RX_PWR(3) Calibration | `0x00 0x00 0x00 0x00` | 3rd order RSSI calibration coefficient | -| 64-67 | 4 | RX_PWR(2) Calibration | `0x00 0x00 0x00 0x00` | 2nd order RSSI calibration coefficient | -| 68-71 | 4 | RX_PWR(1) Calibration | `0x00 0x00 0x00 0x00` | 1st order RSSI calibration coefficient | -| 72-75 | 4 | RX_PWR(0) Calibration | `0x00 0x00 0x00 0x00` | 0th order RSSI calibration coefficient | -| 76-77 | 2 | TX_I(Slope) Calibration | `0x00 0x00` | Slope for Bias calibration | -| 78-79 | 2 | TX_I(Offset) Calibration | `0x00 0x00` | Offset for Bias calibration | -| 80-81 | 2 | TX_PWR(Slope) Calibration | `0x00 0x00` | Slope for TX Power calibration | -| 82-83 | 2 | TX_PWR(Offset) Calibration | `0x00 0x00` | Offset for TX Power calibration | -| 84-85 | 2 | T(Slope) Calibration | `0x00 0x00` | Slope for Temperature calibration | -| 86-87 | 2 | T(Offset) Calibration | `0x00 0x00` | Offset for Temperature calibration, in units of 256ths °C | -| 88-89 | 2 | V(Slope) Calibration | `0x00 0x00` | Slope for VCC calibration | -| 90-91 | 2 | V(Offset) Calibration | `0x00 0x00` | Offset for VCC calibration | -| 92-94 | 3 | Reserved | `0x00 0x00 0x00` | Reserved | -| 95 | 1 | CC_DMI | | Check code for Base Diagnostic Fields (addresses 0 to 94) | -| 96 | 1 | Temperature MSB | | Internally measured module temperature | -| 97 | 1 | Temperature LSB | | | -| 98 | 1 | Vcc MSB | | Internally measured supply voltage in transceiver | -| 99 | 1 | Vcc LSB | | | -| 100 | 1 | TX Bias MSB | | Internally measured TX Bias Current | -| 101 | 1 | TX Bias LSB | | | -| 102 | 1 | TX Power MSB | | Measured TX output power | -| 103 | 1 | TX Power LSB | | | -| 104 | 1 | RX Power MSB | | Measured RX input power | -| 105 | 1 | RX Power LSB | | | -| 106-109 | 4 | Optional Diagnostics | `0x00 0x00 0x00 0x00` (No support) | Monitor Data for Optional Laser temperature and TEC current | -| 110 | 1 | Status/Control | `0x02` (Digital RX LOS) | Optional Status and Control Bits | -| 111 | 1 | Reserved | `0x00` | Reserved | -| 112-113 | 2 | Alarm Flags | `0x01 0x40` | Diagnostic Alarm Flag Status Bits | -| 114 | 1 | Tx Input EQ control | `0x00` (No support) | Tx Input equalization level control | -| 115 | 1 | Rx Out Emphasis control | `0x00` (No support) | Rx Output emphasis level control | -| 116-117 | 2 | Warning Flags | `0x01 0x40` | Diagnostic Warning Flag Status Bits | -| 118-119 | 2 | Ext Status/Control | `0x00 0x00` (No support) | Extended module control and status bytes | -| | | **GENERAL USE FIELDS** | | | -| 120-126 | 7 | Vendor Specific | `0x00 0x00 0x00 0x00 0x00 0x00 0x00` | Vendor specific memory addresses | -| 127 | 1 | Table Select | `0x00` | Optional Page Select | -| | | **USER WRITABLE EEPROM** | | | -| 128-232 | 105 | Reserved | `0x00 0x00 0x00...` | Reserved | -| 233-240 | 8 | GPON SN | Unique in each SFP | GPON Serial Number (ME 256) | -| 241-247 | 7 | Reserved | `0x00 0x00 0x00...` | Reserved | -| 248-255 | 8 | Vendor Control | `0x00 0x00 0x00...` (Not used) | Vendor specific control functions | +| address | size | name | default value | description | +| ------- | ---- | --------------------------------- | ------------------------------------ | ----------------------------------------------------------- | +| | | **DIAGNOSTIC AND CONTROL FIELDS** | | | +| 0-1 | 2 | Temp High Alarm | `0x64 0x00` (100℃) | | +| 2-3 | 2 | Temp Low Alarm | `0xCE 0x00` (-50℃) | | +| 4-5 | 2 | Temp High Warning | `0x55 0x00` (85℃) | | +| 6-7 | 2 | Temp Low Warning | `0xD8 0x00` (-40℃) | | +| 8-9 | 2 | Voltage High Alarm | `0x8C 0xA0` (3.6V) | | +| 10-11 | 2 | Voltage Low Alarm | `0x75 0x30` (3.0V) | | +| 12-13 | 2 | Voltage High Warning | `0x88 0xB8` (3.5V) | | +| 14-15 | 2 | Voltage Low Warning | `0x79 0x18` (3.1V) | | +| 16-17 | 2 | Bias High Alarm | `0xAF 0xC8` (90mA) | | +| 18-19 | 2 | Bias Low Alarm | `0x00 0x00` (0mA) | | +| 20-21 | 2 | Bias High Warning | `0x88 0xB8` (70mA) | | +| 22-23 | 2 | Bias Low Warning | `0x00 0x00` (0mA) | | +| 24-25 | 2 | TX Power High Alarm | `0x7B 0x86` (5dBm) | Value expressed in watts subunits | +| 26-27 | 2 | TX Power Low Alarm | `0x27 0x10` (0dBm) | Value expressed in watts subunits | +| 28-29 | 2 | TX Power High Warning | `0x6E 0x17` (4dBm) | Value expressed in watts subunits | +| 30-31 | 2 | TX Power Low Warning | `0x2B 0xD4` (0.1dBm) | Value expressed in watts subunits | +| 32-33 | 2 | RX Power High Alarm | `0x07 0xCB` (-7dBm) | Value expressed in watts subunits | +| 34-35 | 2 | RX Power Low Alarm | `0x00 0x0F` (-28dBm) | Value expressed in watts subunits | +| 36-37 | 2 | RX Power High Warning | `0x06 0x30` (-8dBm) | Value expressed in watts subunits | +| 38-39 | 2 | RX Power Low Warning | `0x00 0x14` (-27dBm) | Value expressed in watts subunits | +| 40-55 | 16 | Reserved | `0x00 0x00 0x00...` | Contains the mac address of the SFP, it could also be empty | +| 56-59 | 4 | RX_PWR(4) Calibration | `0x00 0x00 0x00 0x00` | 4th order RSSI calibration coefficient | +| 60-63 | 4 | RX_PWR(3) Calibration | `0x00 0x00 0x00 0x00` | 3rd order RSSI calibration coefficient | +| 64-67 | 4 | RX_PWR(2) Calibration | `0x00 0x00 0x00 0x00` | 2nd order RSSI calibration coefficient | +| 68-71 | 4 | RX_PWR(1) Calibration | `0x00 0x00 0x00 0x00` | 1st order RSSI calibration coefficient | +| 72-75 | 4 | RX_PWR(0) Calibration | `0x00 0x00 0x00 0x00` | 0th order RSSI calibration coefficient | +| 76-77 | 2 | TX_I(Slope) Calibration | `0x00 0x00` | Slope for Bias calibration | +| 78-79 | 2 | TX_I(Offset) Calibration | `0x00 0x00` | Offset for Bias calibration | +| 80-81 | 2 | TX_PWR(Slope) Calibration | `0x00 0x00` | Slope for TX Power calibration | +| 82-83 | 2 | TX_PWR(Offset) Calibration | `0x00 0x00` | Offset for TX Power calibration | +| 84-85 | 2 | T(Slope) Calibration | `0x00 0x00` | Slope for Temperature calibration | +| 86-87 | 2 | T(Offset) Calibration | `0x00 0x00` | Offset for Temperature calibration, in units of 256ths °C | +| 88-89 | 2 | V(Slope) Calibration | `0x00 0x00` | Slope for VCC calibration | +| 90-91 | 2 | V(Offset) Calibration | `0x00 0x00` | Offset for VCC calibration | +| 92-94 | 3 | Reserved | `0x00 0x00 0x00` | Reserved | +| 95 | 1 | CC_DMI | | Check code for Base Diagnostic Fields (addresses 0 to 94) | +| 96 | 1 | Temperature MSB | | Internally measured module temperature | +| 97 | 1 | Temperature LSB | | | +| 98 | 1 | Vcc MSB | | Internally measured supply voltage in transceiver | +| 99 | 1 | Vcc LSB | | | +| 100 | 1 | TX Bias MSB | | Internally measured TX Bias Current | +| 101 | 1 | TX Bias LSB | | | +| 102 | 1 | TX Power MSB | | Measured TX output power | +| 103 | 1 | TX Power LSB | | | +| 104 | 1 | RX Power MSB | | Measured RX input power | +| 105 | 1 | RX Power LSB | | | +| 106-109 | 4 | Optional Diagnostics | `0x00 0x00 0x00 0x00` (No support) | Monitor Data for Optional Laser temperature and TEC current | +| 110 | 1 | Status/Control | `0x02` (Digital RX LOS) | Optional Status and Control Bits | +| 111 | 1 | Reserved | `0x00` | Reserved | +| 112-113 | 2 | Alarm Flags | `0x01 0x40` | Diagnostic Alarm Flag Status Bits | +| 114 | 1 | Tx Input EQ control | `0x00` (No support) | Tx Input equalization level control | +| 115 | 1 | Rx Out Emphasis control | `0x00` (No support) | Rx Output emphasis level control | +| 116-117 | 2 | Warning Flags | `0x01 0x40` | Diagnostic Warning Flag Status Bits | +| 118-119 | 2 | Ext Status/Control | `0x00 0x00` (No support) | Extended module control and status bytes | +| | | **GENERAL USE FIELDS** | | | +| 120-126 | 7 | Vendor Specific | `0x00 0x00 0x00 0x00 0x00 0x00 0x00` | Vendor specific memory addresses | +| 127 | 1 | Table Select | `0x00` | Optional Page Select | +| | | **USER WRITABLE EEPROM** | | | +| 128-232 | 105 | Reserved | `0x00 0x00 0x00...` | Reserved | +| 233-240 | 8 | GPON SN | Unique in each SFP | GPON Serial Number (ME 256) | +| 241-247 | 7 | Reserved | `0x00 0x00 0x00...` | Reserved | +| 248-255 | 8 | Vendor Control | `0x00 0x00 0x00...` (Not used) | Vendor specific control functions | {% include alert.html content="For more information, see the SFF-8472 Rev 11.0 specification." alert="Info" icon="svg-info" color="blue" %} @@ -299,5 +301,5 @@ The Zyxel PMG3000-D20B stores the content of the emulated EEPROM1 (A2h) in `/tmp # Miscellaneous Links -- [zyxel gpon- sfp](https://github.com/xvzf/zyxel-gpon-sfp) -- [zyxel pmg-3000 mod kit](https://github.com/nanomad/zyxel-pmg-3000-mod-kit) +- [Zyxel gpon-sfp](https://github.com/xvzf/zyxel-gpon-sfp) +- [Zyxel PMG-3000 mod kit](https://github.com/nanomad/zyxel-pmg-3000-mod-kit) diff --git a/_ont/ont-zyxel-pmg3100-t0.md b/_ont/ont-zyxel-pmg3100-t0.md index 531f4d1..7ebdf09 100644 --- a/_ont/ont-zyxel-pmg3100-t0.md +++ b/_ont/ont-zyxel-pmg3100-t0.md @@ -15,7 +15,7 @@ parent: Zyxel | Flash | | | RAM | | | System | | -| HSGMII | No | +| 2.5GBaseT | No | | Optics | SC/APC | | IP address | | | Web Gui | ✅ | diff --git a/_ont/ont-zyxel-pmg5100-t0.md b/_ont/ont-zyxel-pmg5100-t0.md index 4e2b8f5..301d3ee 100644 --- a/_ont/ont-zyxel-pmg5100-t0.md +++ b/_ont/ont-zyxel-pmg5100-t0.md @@ -15,7 +15,7 @@ parent: Zyxel | Flash | | | RAM | | | System | | -| HSGMII | ✅ | +| 2.5GBaseT | Yes | | Optics | SC/APC | | IP address | | | Web Gui | ✅ | diff --git a/assets/img/f601_v8.jpg b/assets/img/f601_v8.jpg deleted file mode 100644 index a9ec6cd..0000000 Binary files a/assets/img/f601_v8.jpg and /dev/null differ diff --git a/assets/img/f601v9/back.jpg b/assets/img/f601v9/back.jpg new file mode 100644 index 0000000..2062da3 Binary files /dev/null and b/assets/img/f601v9/back.jpg differ diff --git a/assets/img/f601v9/front.jpg b/assets/img/f601v9/front.jpg new file mode 100644 index 0000000..c33c38d Binary files /dev/null and b/assets/img/f601v9/front.jpg differ diff --git a/assets/img/f601v9/header.jpg b/assets/img/f601v9/header.jpg new file mode 100644 index 0000000..fcb7351 Binary files /dev/null and b/assets/img/f601v9/header.jpg differ diff --git a/assets/img/f601v9/teardown-1.jpg b/assets/img/f601v9/teardown-1.jpg new file mode 100644 index 0000000..d4913e0 Binary files /dev/null and b/assets/img/f601v9/teardown-1.jpg differ diff --git a/assets/img/f601v9/teardown-2.jpg b/assets/img/f601v9/teardown-2.jpg new file mode 100644 index 0000000..5dd7240 Binary files /dev/null and b/assets/img/f601v9/teardown-2.jpg differ diff --git a/assets/img/f601v9/teardown-3.jpg b/assets/img/f601v9/teardown-3.jpg new file mode 100644 index 0000000..0dbed40 Binary files /dev/null and b/assets/img/f601v9/teardown-3.jpg differ -- cgit v1.2.3