From bc4fa78050369a4c458da75676bfe6d60a903087 Mon Sep 17 00:00:00 2001
From: Simone <26844016+simonebortolin@users.noreply.github.com>
Date: Fri, 10 Feb 2023 21:57:28 +0100
Subject: Some Fix on Huawei, FS, Broadcom (#146)

* Getting/Setting Speed LAN Mode
* RX Loss / TX Fault confusion
* change order and heading of section
* fix eeprom values and subunit
* various alignment and table fixes
---
 _ont/ont-huawei-ma5671a-rooted.md | 38 +++++++++++++++++++++++++++++++-------
 1 file changed, 31 insertions(+), 7 deletions(-)

(limited to '_ont/ont-huawei-ma5671a-rooted.md')

diff --git a/_ont/ont-huawei-ma5671a-rooted.md b/_ont/ont-huawei-ma5671a-rooted.md
index 95d579e..019610a 100644
--- a/_ont/ont-huawei-ma5671a-rooted.md
+++ b/_ont/ont-huawei-ma5671a-rooted.md
@@ -31,6 +31,7 @@ layout: default
 1. Type `:wq`
 1. Run:
 
+
 ```shell
 fw_setenv sfp_a2_info ($cat /tmp/sfp_a2.txt)
 ```
@@ -39,11 +40,11 @@ fw_setenv sfp_a2_info ($cat /tmp/sfp_a2.txt)
 
 1. Save `sfp_a2_info` in a temporary file
 
-```shell
+```sh
 fw_printenv sfp_a2_info | sed "s/^sfp_a2_info=//" > /tmp/sfp_a2.txt
 ```
 And print a pretty version:
-```shell
+```sh
 fw_printenv sfp_a2_info | sed "s/^sfp_a2_info=//" | tr '@' '\n'
 ```
 
@@ -77,7 +78,7 @@ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASFcC2r7vAAAAAAAAAAAAAAAAAAAA
 
 5. Transfer the modified file back into variable `sfp_a2_info`
 
-```shell
+```sh
 fw_setenv sfp_a2_info $(cat /tmp/sfp_a2.txt)
 ```
 
@@ -85,7 +86,7 @@ fw_setenv sfp_a2_info $(cat /tmp/sfp_a2.txt)
 
 After rebooting, check whether the new variables have been saved correctly:
 
-```shell
+```sh
 fw_printenv nPassword
 fw_printenv gSerial
 fw_printenv ethaddr
@@ -93,16 +94,39 @@ fw_printenv ethaddr
 
 ## Checking whether the connection with the OLT was successful (O5 state)
 
-```shell
+```sh
 onu ploamsg
 ```
 
-# Disabling dying gasp
+## Disabling dying gasp
 
-```shell
+```sh
 fw_setenv nDyingGaspEnable 0 
 ```
 
+## Getting/Setting Speed LAN Mode
+
+To get the LAN Mode:
+
+```sh
+onu lanpsg 0
+```
+The `link_status` variable tells the current speed
+
+| Value (for `sgmii_mode` and `link_status`) | Speed                              |
+| ------------------------------------------ | ---------------------------------- |
+| 3                                          | 1 Gbps / SGMII with auto-neg on    |
+| 4                                          | 1 Gbps / SGMII with auto-neg off   |
+| 5                                          | 2.5 Gbps / HSGMII with auto-neg on |
+
+To change the default lan mode value you can use `fw_setenv sgmii_mode`. The firmware already has the value 5 by default and it is generally not necessary to change it.
+
+## Querying a particular OMCI ME
+```sh
+omci_pipe.sh meg MIB_IDX ME_IN
+```
+Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number
+
 # Miscellaneous Links
 
 - [Edit sfp_a2_info file](https://forum.openwrt.org/t/support-ma5671a-sfp-gpon/48042/25)
-- 
cgit v1.2.3