From ba2a54a9dd6e5a263c5e6886e55b3bc55b95b4ab Mon Sep 17 00:00:00 2001 From: MerryMage Date: Tue, 1 Mar 2016 17:24:18 +0000 Subject: Dependencies: Remove GLFW, Add SDL2 citra: Remove GLFW, Add SDL2 FindSDL2: Do not CACHE SDL2_* variables if library is not found EmuWindow_SDL2: Set minimal client area at initialisation time EmuWindow_SDL2: Corrections EmuWindow_SDL2: Fix no decorations on startup on OS X cmake: windows_copy_files --- externals/cmake-modules/FindSDL2.cmake | 224 +++++++++++++++++++++++++ externals/cmake-modules/WindowsCopyFiles.cmake | 28 ++++ 2 files changed, 252 insertions(+) create mode 100644 externals/cmake-modules/FindSDL2.cmake create mode 100644 externals/cmake-modules/WindowsCopyFiles.cmake (limited to 'externals') diff --git a/externals/cmake-modules/FindSDL2.cmake b/externals/cmake-modules/FindSDL2.cmake new file mode 100644 index 000000000..0af86840a --- /dev/null +++ b/externals/cmake-modules/FindSDL2.cmake @@ -0,0 +1,224 @@ + +# This module defines +# SDL2_LIBRARY, the name of the library to link against +# SDL2_FOUND, if false, do not try to link to SDL2 +# SDL2_INCLUDE_DIR, where to find SDL.h +# +# This module responds to the the flag: +# SDL2_BUILDING_LIBRARY +# If this is defined, then no SDL2main will be linked in because +# only applications need main(). +# Otherwise, it is assumed you are building an application and this +# module will attempt to locate and set the the proper link flags +# as part of the returned SDL2_LIBRARY variable. +# +# Don't forget to include SDLmain.h and SDLmain.m your project for the +# OS X framework based version. (Other versions link to -lSDL2main which +# this module will try to find on your behalf.) Also for OS X, this +# module will automatically add the -framework Cocoa on your behalf. +# +# +# Additional Note: If you see an empty SDL2_LIBRARY_TEMP in your configuration +# and no SDL2_LIBRARY, it means CMake did not find your SDL2 library +# (SDL2.dll, libsdl2.so, SDL2.framework, etc). +# Set SDL2_LIBRARY_TEMP to point to your SDL2 library, and configure again. +# Similarly, if you see an empty SDL2MAIN_LIBRARY, you should set this value +# as appropriate. These values are used to generate the final SDL2_LIBRARY +# variable, but when these values are unset, SDL2_LIBRARY does not get created. +# +# +# $SDL2DIR is an environment variable that would +# correspond to the ./configure --prefix=$SDL2DIR +# used in building SDL2. +# l.e.galup 9-20-02 +# +# Modified by Eric Wing. +# Added code to assist with automated building by using environmental variables +# and providing a more controlled/consistent search behavior. +# Added new modifications to recognize OS X frameworks and +# additional Unix paths (FreeBSD, etc). +# Also corrected the header search path to follow "proper" SDL guidelines. +# Added a search for SDL2main which is needed by some platforms. +# Added a search for threads which is needed by some platforms. +# Added needed compile switches for MinGW. +# +# On OSX, this will prefer the Framework version (if found) over others. +# People will have to manually change the cache values of +# SDL2_LIBRARY to override this selection or set the CMake environment +# CMAKE_INCLUDE_PATH to modify the search paths. +# +# Note that the header path has changed from SDL2/SDL.h to just SDL.h +# This needed to change because "proper" SDL convention +# is #include "SDL.h", not . This is done for portability +# reasons because not all systems place things in SDL2/ (see FreeBSD). + +#============================================================================= +# Copyright 2003-2009 Kitware, Inc. +# +# Distributed under the OSI-approved BSD License (the "License"). +# +# This software is distributed WITHOUT ANY WARRANTY; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the License for more information. +#============================================================================= +# CMake - Cross Platform Makefile Generator +# Copyright 2000-2016 Kitware, Inc. +# Copyright 2000-2011 Insight Software Consortium +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# * Neither the names of Kitware, Inc., the Insight Software Consortium, +# nor the names of their contributors may be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# ------------------------------------------------------------------------------ +# +# The above copyright and license notice applies to distributions of +# CMake in source and binary form. Some source files contain additional +# notices of original copyright by their contributors; see each source +# for details. Third-party software packages supplied with CMake under +# compatible licenses provide their own copyright notices documented in +# corresponding subdirectories. +# +# ------------------------------------------------------------------------------ +# +# CMake was initially developed by Kitware with the following sponsorship: +# +# * National Library of Medicine at the National Institutes of Health +# as part of the Insight Segmentation and Registration Toolkit (ITK). +# +# * US National Labs (Los Alamos, Livermore, Sandia) ASC Parallel +# Visualization Initiative. +# +# * National Alliance for Medical Image Computing (NAMIC) is funded by the +# National Institutes of Health through the NIH Roadmap for Medical Research, +# Grant U54 EB005149. +# +# * Kitware, Inc. +# + +message("") + +SET(SDL2_SEARCH_PATHS + ~/Library/Frameworks + /Library/Frameworks + /usr/local + /usr + /sw # Fink + /opt/local # DarwinPorts + /opt/csw # Blastwave + /opt + ${SDL2_PATH} +) + +FIND_LIBRARY(SDL2_LIBRARY_TEMP + NAMES SDL2 + HINTS + $ENV{SDL2DIR} + PATH_SUFFIXES lib64 lib + PATHS ${SDL2_SEARCH_PATHS} +) + +IF(SDL2_LIBRARY_TEMP) + FIND_PATH(SDL2_INCLUDE_DIR SDL.h + HINTS + $ENV{SDL2DIR} + PATH_SUFFIXES include/SDL2 include + PATHS ${SDL2_SEARCH_PATHS} + ) + + IF(NOT SDL2_BUILDING_LIBRARY) + IF(NOT ${SDL2_INCLUDE_DIR} MATCHES ".framework") + # Non-OS X framework versions expect you to also dynamically link to + # SDL2main. This is mainly for Windows and OS X. Other (Unix) platforms + # seem to provide SDL2main for compatibility even though they don't + # necessarily need it. + FIND_LIBRARY(SDL2MAIN_LIBRARY + NAMES SDL2main + HINTS + $ENV{SDL2DIR} + PATH_SUFFIXES lib64 lib + PATHS ${SDL2_SEARCH_PATHS} + ) + ENDIF(NOT ${SDL2_INCLUDE_DIR} MATCHES ".framework") + ENDIF(NOT SDL2_BUILDING_LIBRARY) + + # SDL2 may require threads on your system. + # The Apple build may not need an explicit flag because one of the + # frameworks may already provide it. + # But for non-OSX systems, I will use the CMake Threads package. + IF(NOT APPLE) + FIND_PACKAGE(Threads) + ENDIF(NOT APPLE) + + # MinGW needs an additional library, mwindows + # It's total link flags should look like -lmingw32 -lSDL2main -lSDL2 -lmwindows + # (Actually on second look, I think it only needs one of the m* libraries.) + IF(MINGW) + SET(MINGW32_LIBRARY mingw32 CACHE STRING "mwindows for MinGW") + ENDIF(MINGW) + + # For SDL2main + IF(NOT SDL2_BUILDING_LIBRARY) + IF(SDL2MAIN_LIBRARY) + SET(SDL2_LIBRARY_TEMP ${SDL2MAIN_LIBRARY} ${SDL2_LIBRARY_TEMP}) + ENDIF(SDL2MAIN_LIBRARY) + ENDIF(NOT SDL2_BUILDING_LIBRARY) + + # For OS X, SDL2 uses Cocoa as a backend so it must link to Cocoa. + # CMake doesn't display the -framework Cocoa string in the UI even + # though it actually is there if I modify a pre-used variable. + # I think it has something to do with the CACHE STRING. + # So I use a temporary variable until the end so I can set the + # "real" variable in one-shot. + IF(APPLE) + SET(SDL2_LIBRARY_TEMP ${SDL2_LIBRARY_TEMP} "-framework Cocoa") + ENDIF(APPLE) + + # For threads, as mentioned Apple doesn't need this. + # In fact, there seems to be a problem if I used the Threads package + # and try using this line, so I'm just skipping it entirely for OS X. + IF(NOT APPLE) + SET(SDL2_LIBRARY_TEMP ${SDL2_LIBRARY_TEMP} ${CMAKE_THREAD_LIBS_INIT}) + ENDIF(NOT APPLE) + + # For MinGW library + IF(MINGW) + SET(SDL2_LIBRARY_TEMP ${MINGW32_LIBRARY} ${SDL2_LIBRARY_TEMP}) + ENDIF(MINGW) + + # Set the final string here so the GUI reflects the final state. + SET(SDL2_LIBRARY ${SDL2_LIBRARY_TEMP} CACHE STRING "Where the SDL2 Library can be found") + + # Unset the temp variable to INTERNAL so it is not seen in the CMake GUI + UNSET(SDL2_LIBRARY_TEMP) +ENDIF(SDL2_LIBRARY_TEMP) + +message("") + +INCLUDE(FindPackageHandleStandardArgs) + +FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL2 REQUIRED_VARS SDL2_LIBRARY SDL2_INCLUDE_DIR) diff --git a/externals/cmake-modules/WindowsCopyFiles.cmake b/externals/cmake-modules/WindowsCopyFiles.cmake new file mode 100644 index 000000000..cd0c2ce47 --- /dev/null +++ b/externals/cmake-modules/WindowsCopyFiles.cmake @@ -0,0 +1,28 @@ +# Copyright 2016 Citra Emulator Project +# Licensed under GPLv2 or any later version +# Refer to the license.txt file included. + +# This file provides the function windows_copy_files. +# This is only valid on Windows. + +# Include guard +if(__windows_copy_files) + return() +endif() +set(__windows_copy_files YES) + +# Any number of files to copy from SOURCE_DIR to DEST_DIR can be specified after DEST_DIR. +# This copying happens post-build. +function(windows_copy_files TARGET SOURCE_DIR DEST_DIR) + # windows commandline expects the / to be \ so switch them + string(REPLACE "/" "\\\\" SOURCE_DIR ${SOURCE_DIR}) + string(REPLACE "/" "\\\\" DEST_DIR ${DEST_DIR}) + + # /NJH /NJS /NDL /NFL /NC /NS /NP - Silence any output + # cmake adds an extra check for command success which doesn't work too well with robocopy + # so trick it into thinking the command was successful with the || cmd /c "exit /b 0" + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND if not exist ${DEST_DIR} mkdir ${DEST_DIR} 2> nul + COMMAND robocopy ${SOURCE_DIR} ${DEST_DIR} ${ARGN} /NJH /NJS /NDL /NFL /NC /NS /NP || cmd /c "exit /b 0" + ) +endfunction() \ No newline at end of file -- cgit v1.2.3