From 3f00dd911780552c77575d3176860f576ebc0fdb Mon Sep 17 00:00:00 2001 From: Lioncash Date: Sat, 31 Jan 2015 21:44:35 -0500 Subject: arm: Clean up ARMul_State Remove unnecessary/unused struct variables. --- src/core/arm/dyncom/arm_dyncom.cpp | 9 +- src/core/arm/interpreter/arminit.cpp | 29 ++---- src/core/arm/skyeye_common/armdefs.h | 181 ++++++++++++++--------------------- 3 files changed, 83 insertions(+), 136 deletions(-) (limited to 'src/core/arm') diff --git a/src/core/arm/dyncom/arm_dyncom.cpp b/src/core/arm/dyncom/arm_dyncom.cpp index 01ffbcc87..f6628ca33 100644 --- a/src/core/arm/dyncom/arm_dyncom.cpp +++ b/src/core/arm/dyncom/arm_dyncom.cpp @@ -36,9 +36,8 @@ ARM_DynCom::ARM_DynCom() { state->NextInstr = RESUME; // NOTE: This will be overwritten by LoadContext state->Emulate = 3; - state->pc = state->Reg[15] = 0x00000000; + state->Reg[15] = 0x00000000; state->Reg[13] = 0x10000000; // Set stack pointer to the top of the stack - state->servaddr = 0xFFFF0000; state->NirqSig = HIGH; VFPInit(state.get()); // Initialize the VFP @@ -50,7 +49,7 @@ ARM_DynCom::~ARM_DynCom() { } void ARM_DynCom::SetPC(u32 pc) { - state->pc = state->Reg[15] = pc; + state->Reg[15] = pc; } u32 ARM_DynCom::GetPC() const { @@ -106,7 +105,6 @@ void ARM_DynCom::SaveContext(Core::ThreadContext& ctx) { ctx.fpscr = state->VFP[1]; ctx.fpexc = state->VFP[2]; - ctx.reg_15 = state->Reg[15]; ctx.mode = state->NextInstr; } @@ -116,13 +114,12 @@ void ARM_DynCom::LoadContext(const Core::ThreadContext& ctx) { state->Reg[13] = ctx.sp; state->Reg[14] = ctx.lr; - state->pc = ctx.pc; + state->Reg[15] = ctx.pc; state->Cpsr = ctx.cpsr; state->VFP[1] = ctx.fpscr; state->VFP[2] = ctx.fpexc; - state->Reg[15] = ctx.reg_15; state->NextInstr = ctx.mode; } diff --git a/src/core/arm/interpreter/arminit.cpp b/src/core/arm/interpreter/arminit.cpp index a0e041fa0..a52d14960 100644 --- a/src/core/arm/interpreter/arminit.cpp +++ b/src/core/arm/interpreter/arminit.cpp @@ -95,12 +95,6 @@ ARMul_State* ARMul_NewState(ARMul_State* state) state->lateabtSig = HIGH; state->bigendSig = LOW; - //chy:2003-08-19 - state->CP14R0_CCD = -1; - - memset(&state->exclusive_tag_array[0], 0xFF, sizeof(state->exclusive_tag_array[0]) * 128); - state->exclusive_access_state = 0; - return state; } @@ -118,15 +112,15 @@ void ARMul_SelectProcessor(ARMul_State* state, unsigned properties) state->data32Sig = HIGH; } - state->is_v4 = (properties & (ARM_v4_Prop | ARM_v5_Prop)) ? HIGH : LOW; - state->is_v5 = (properties & ARM_v5_Prop) ? HIGH : LOW; - state->is_v5e = (properties & ARM_v5e_Prop) ? HIGH : LOW; - state->is_XScale = (properties & ARM_XScale_Prop) ? HIGH : LOW; - state->is_iWMMXt = (properties & ARM_iWMMXt_Prop) ? HIGH : LOW; - state->is_v6 = (properties & ARM_v6_Prop) ? HIGH : LOW; - state->is_ep9312 = (properties & ARM_ep9312_Prop) ? HIGH : LOW; - state->is_pxa27x = (properties & ARM_PXA27X_Prop) ? HIGH : LOW; - state->is_v7 = (properties & ARM_v7_Prop) ? HIGH : LOW; + state->is_v4 = (properties & (ARM_v4_Prop | ARM_v5_Prop)) != 0; + state->is_v5 = (properties & ARM_v5_Prop) != 0; + state->is_v5e = (properties & ARM_v5e_Prop) != 0; + state->is_XScale = (properties & ARM_XScale_Prop) != 0; + state->is_iWMMXt = (properties & ARM_iWMMXt_Prop) != 0; + state->is_v6 = (properties & ARM_v6_Prop) != 0; + state->is_ep9312 = (properties & ARM_ep9312_Prop) != 0; + state->is_pxa27x = (properties & ARM_PXA27X_Prop) != 0; + state->is_v7 = (properties & ARM_v7_Prop) != 0; /* Only initialse the coprocessor support once we know what kind of chip we are dealing with. */ @@ -164,9 +158,4 @@ void ARMul_Reset(ARMul_State* state) state->AbortAddr = 1; state->NumInstrs = 0; - state->NumNcycles = 0; - state->NumScycles = 0; - state->NumIcycles = 0; - state->NumCcycles = 0; - state->NumFcycles = 0; } diff --git a/src/core/arm/skyeye_common/armdefs.h b/src/core/arm/skyeye_common/armdefs.h index be54ce71b..778868783 100644 --- a/src/core/arm/skyeye_common/armdefs.h +++ b/src/core/arm/skyeye_common/armdefs.h @@ -74,88 +74,69 @@ typedef unsigned ARMul_CPWrites(ARMul_State* state, unsigned reg, ARMword value) #define VFP_REG_NUM 64 struct ARMul_State { - ARMword Emulate; /* to start and stop emulation */ - unsigned EndCondition; /* reason for stopping */ - unsigned ErrorCode; /* type of illegal instruction */ + ARMword Emulate; // To start and stop emulation + unsigned EndCondition; // Reason for stopping + unsigned ErrorCode; // Type of illegal instruction - /* Order of the following register should not be modified */ - ARMword Reg[16]; /* the current register file */ - ARMword Cpsr; /* the current psr */ + // Order of the following register should not be modified + ARMword Reg[16]; // The current register file + ARMword Cpsr; // The current PSR ARMword Spsr_copy; ARMword phys_pc; ARMword Reg_usr[2]; - ARMword Reg_svc[2]; /* R13_SVC R14_SVC */ - ARMword Reg_abort[2]; /* R13_ABORT R14_ABORT */ - ARMword Reg_undef[2]; /* R13 UNDEF R14 UNDEF */ - ARMword Reg_irq[2]; /* R13_IRQ R14_IRQ */ - ARMword Reg_firq[7]; /* R8---R14 FIRQ */ - ARMword Spsr[7]; /* the exception psr's */ - ARMword Mode; /* the current mode */ - ARMword Bank; /* the current register bank */ - ARMword exclusive_tag; /* the address for which the local monitor is in exclusive access mode */ + ARMword Reg_svc[2]; // R13_SVC R14_SVC + ARMword Reg_abort[2]; // R13_ABORT R14_ABORT + ARMword Reg_undef[2]; // R13 UNDEF R14 UNDEF + ARMword Reg_irq[2]; // R13_IRQ R14_IRQ + ARMword Reg_firq[7]; // R8---R14 FIRQ + ARMword Spsr[7]; // The exception psr's + ARMword Mode; // The current mode + ARMword Bank; // The current register bank + ARMword exclusive_tag; // The address for which the local monitor is in exclusive access mode ARMword exclusive_state; ARMword exclusive_result; ARMword CP15[VFP_BASE - CP15_BASE]; - ARMword VFP[3]; /* FPSID, FPSCR, and FPEXC */ - /* VFPv2 and VFPv3-D16 has 16 doubleword registers (D0-D16 or S0-S31). - VFPv3-D32/ASIMD may have up to 32 doubleword registers (D0-D31), - and only 32 singleword registers are accessible (S0-S31). */ + ARMword VFP[3]; // FPSID, FPSCR, and FPEXC + // VFPv2 and VFPv3-D16 has 16 doubleword registers (D0-D16 or S0-S31). + // VFPv3-D32/ASIMD may have up to 32 doubleword registers (D0-D31), + // and only 32 singleword registers are accessible (S0-S31). ARMword ExtReg[VFP_REG_NUM]; /* ---- End of the ordered registers ---- */ - ARMword RegBank[7][16]; /* all the registers */ - //chy:2003-08-19, used in arm xscale - /* 40 bit accumulator. We always keep this 64 bits wide, - and move only 40 bits out of it in an MRA insn. */ - ARMdword Accumulator; - - ARMword NFlag, ZFlag, CFlag, VFlag, IFFlags; /* dummy flags for speed */ - unsigned long long int icounter, debug_icounter, kernel_icounter; + ARMword RegBank[7][16]; // all the registers + + ARMword NFlag, ZFlag, CFlag, VFlag, IFFlags; // Dummy flags for speed unsigned int shifter_carry_out; - /* add armv6 flags dyf:2010-08-09 */ + // Add armv6 flags dyf:2010-08-09 ARMword GEFlag, EFlag, AFlag, QFlag; - //chy:2003-08-19, used in arm v5e|xscale - ARMword SFlag; + #ifdef MODET - ARMword TFlag; /* Thumb state */ + ARMword TFlag; // Thumb state #endif - ARMword instr, pc, temp; /* saved register state */ - ARMword loaded, decoded; /* saved pipeline state */ - //chy 2006-04-12 for ICE breakpoint - ARMword loaded_addr, decoded_addr; /* saved pipeline state addr*/ - unsigned int NumScycles, NumNcycles, NumIcycles, NumCcycles, NumFcycles; /* emulated cycles used */ - unsigned long long NumInstrs; /* the number of instructions executed */ - unsigned NumInstrsToExecute; - ARMword currentexaddr; - ARMword currentexval; - ARMword currentexvald; - ARMword servaddr; + unsigned long long NumInstrs; // The number of instructions executed + unsigned NumInstrsToExecute; unsigned NextInstr; - unsigned VectorCatch; /* caught exception mask */ - unsigned CallDebug; /* set to call the debugger */ - unsigned CanWatch; /* set by memory interface if its willing to suffer the - overhead of checking for watchpoints on each memory - access */ - - ARMul_CPInits *CPInit[16]; /* coprocessor initialisers */ - ARMul_CPExits *CPExit[16]; /* coprocessor finalisers */ - ARMul_LDCs *LDC[16]; /* LDC instruction */ - ARMul_STCs *STC[16]; /* STC instruction */ - ARMul_MRCs *MRC[16]; /* MRC instruction */ - ARMul_MCRs *MCR[16]; /* MCR instruction */ - ARMul_MRRCs *MRRC[16]; /* MRRC instruction */ - ARMul_MCRRs *MCRR[16]; /* MCRR instruction */ - ARMul_CDPs *CDP[16]; /* CDP instruction */ - ARMul_CPReads *CPRead[16]; /* Read CP register */ - ARMul_CPWrites *CPWrite[16]; /* Write CP register */ - unsigned char *CPData[16]; /* Coprocessor data */ - unsigned char const *CPRegWords[16]; /* map of coprocessor register sizes */ - - unsigned Debug; /* show instructions as they are executed */ - unsigned NresetSig; /* reset the processor */ + unsigned VectorCatch; // Caught exception mask + + ARMul_CPInits* CPInit[16]; // Coprocessor initialisers + ARMul_CPExits* CPExit[16]; // Coprocessor finalisers + ARMul_LDCs* LDC[16]; // LDC instruction + ARMul_STCs* STC[16]; // STC instruction + ARMul_MRCs* MRC[16]; // MRC instruction + ARMul_MCRs* MCR[16]; // MCR instruction + ARMul_MRRCs* MRRC[16]; // MRRC instruction + ARMul_MCRRs* MCRR[16]; // MCRR instruction + ARMul_CDPs* CDP[16]; // CDP instruction + ARMul_CPReads* CPRead[16]; // Read CP register + ARMul_CPWrites* CPWrite[16]; // Write CP register + unsigned char* CPData[16]; // Coprocessor data + unsigned char const* CPRegWords[16]; // Map of coprocessor register sizes + + unsigned Debug; // Show instructions as they are executed + unsigned NresetSig; // Reset the processor unsigned NfiqSig; unsigned NirqSig; @@ -199,54 +180,34 @@ So, if lateabtSig=1, then it means Late Abort Model(Base Updated Abort Model) */ unsigned lateabtSig; - ARMword Vector; /* synthesize aborts in cycle modes */ - ARMword Aborted; /* sticky flag for aborts */ - ARMword Reseted; /* sticky flag for Reset */ - ARMword Inted, LastInted; /* sticky flags for interrupts */ - ARMword Base; /* extra hand for base writeback */ - ARMword AbortAddr; /* to keep track of Prefetch aborts */ - - int verbose; /* non-zero means print various messages like the banner */ - - int mmu_inited; - - //chy: 2003-08-11, for different arm core type - unsigned is_v4; /* Are we emulating a v4 architecture (or higher) ? */ - unsigned is_v5; /* Are we emulating a v5 architecture ? */ - unsigned is_v5e; /* Are we emulating a v5e architecture ? */ - unsigned is_v6; /* Are we emulating a v6 architecture ? */ - unsigned is_v7; /* Are we emulating a v7 architecture ? */ - unsigned is_XScale; /* Are we emulating an XScale architecture ? */ - unsigned is_iWMMXt; /* Are we emulating an iWMMXt co-processor ? */ - unsigned is_ep9312; /* Are we emulating a Cirrus Maverick co-processor ? */ - unsigned is_pxa27x; /* Are we emulating a Intel PXA27x co-processor ? */ - - //chy: seems only used in xscale's CP14 - ARMword CP14R0_CCD; /* used to count 64 clock cycles with CP14 R0 bit 3 set */ - - //teawater add for arm2x86 2005.07.05------------------------------------------- - //arm_arm A2-18 - int abort_model; //0 Base Restored Abort Model, 1 the Early Abort Model, 2 Base Updated Abort Model - - /*added by ksh in 2005-10-1*/ - cpu_config_t *cpu; - - /* added LPC remap function */ - int vector_remap_flag; - u32 vector_remap_addr; - u32 vector_remap_size; - - u32 step; - u32 cycle; - - /* monitored memory for exclusice access */ - ARMword exclusive_tag_array[128]; - /* 1 means exclusive access and 0 means open access */ - ARMword exclusive_access_state; + ARMword Vector; // Synthesize aborts in cycle modes + ARMword Aborted; // Sticky flag for aborts + ARMword Reseted; // Sticky flag for Reset + ARMword Inted, LastInted; // Sticky flags for interrupts + ARMword Base; // Extra hand for base writeback + ARMword AbortAddr; // To keep track of Prefetch aborts + + // For differentiating ARM core emulaiton. + bool is_v4; // Are we emulating a v4 architecture (or higher)? + bool is_v5; // Are we emulating a v5 architecture? + bool is_v5e; // Are we emulating a v5e architecture? + bool is_v6; // Are we emulating a v6 architecture? + bool is_v7; // Are we emulating a v7 architecture? + bool is_XScale; // Are we emulating an XScale architecture? + bool is_iWMMXt; // Are we emulating an iWMMXt co-processor? + bool is_ep9312; // Are we emulating a Cirrus Maverick co-processor? + bool is_pxa27x; // Are we emulating a Intel PXA27x co-processor? + + // ARM_ARM A2-18 + // 0 Base Restored Abort Model, 1 the Early Abort Model, 2 Base Updated Abort Model + int abort_model; + + // Added by ksh in 2005-10-1 + cpu_config_t* cpu; u32 CurrInstr; - u32 last_pc; /* the last pc executed */ - u32 last_instr; /* the last inst executed */ + u32 last_pc; // The last PC executed + u32 last_instr; // The last instruction executed u32 WriteAddr[17]; u32 WriteData[17]; u32 WritePc[17]; -- cgit v1.2.3