From 73e9078f2c16a4c33929699fa202a7248100a00f Mon Sep 17 00:00:00 2001
From: "Wolfgang (Wolle) Ewald" <wolfgang.ewald@wolles-elektronikkiste.de>
Date: Tue, 4 Aug 2020 18:58:56 +0200
Subject: Add files via upload

---
 .../Experimental_getResultWithRange.ino            | 47 +++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

(limited to 'examples/Experimental_getResultWithRange')

diff --git a/examples/Experimental_getResultWithRange/Experimental_getResultWithRange.ino b/examples/Experimental_getResultWithRange/Experimental_getResultWithRange.ino
index 8b13789..6125b91 100644
--- a/examples/Experimental_getResultWithRange/Experimental_getResultWithRange.ino
+++ b/examples/Experimental_getResultWithRange/Experimental_getResultWithRange.ino
@@ -1 +1,46 @@
-
+/***************************************************************************
+* Example sketch for the ADS1115_WE library
+*
+* This is an experimental sketch
+*  
+* Further information can be found on:
+* https://wolles-elektronikkiste.de/ads1115
+* 
+***************************************************************************/
+
+#include<ADS1115_WE.h> 
+#include<Wire.h>
+#define I2C_ADDRESS 0x48
+
+ADS1115_WE adc(I2C_ADDRESS);
+// ADS1115_WE adc = ADS1115_WE(); // Alternative: uses default address 0x48
+
+void setup() {
+  Wire.begin();
+  Serial.begin(9600);
+  if(!adc.init()){
+    Serial.println("ADS1115 not connected!");
+  }
+
+  adc.setVoltageRange_mV(ADS1115_RANGE_1024); //comment line/change parameter to change range
+
+  adc.setCompareChannels(ADS1115_COMP_0_1); //comment line/change parameter to change channel
+
+  adc.setMeasureMode(ADS1115_CONTINUOUS); //comment line/change parameter to change mode
+
+  Serial.println("ADS1115 Example Sketch - Eperimental Sketch to test getResultWithRange");
+  Serial.println();
+}
+
+void loop() {
+  float voltage = 0.0;
+  int mappedResult = 0;
+  voltage = adc.getResult_mV(); // alternative: getResult_mV for Millivolt
+  mappedResult = adc.getResultWithRange(0, 255);
+  Serial.print("Channel 0 vs GND [mV]: ");
+  Serial.println(voltage);
+  Serial.print("Mapped Result        : ");
+  Serial.println(mappedResult);
+  Serial.println("-------------------------------");
+  delay(2000);
+}
-- 
cgit v1.2.3