From 858a3470e926fe3fbc605a136c2adb3b7012d1e2 Mon Sep 17 00:00:00 2001 From: Benjamin Dobell Date: Tue, 14 May 2013 00:09:19 +1000 Subject: Moved LICENSE to root of the repo and deleted heimdall-frontend duplicate documentation in doc-pak. --- LICENSE | 19 ++ heimdall-frontend/doc-pak/LICENSE | 19 -- heimdall-frontend/doc-pak/README | 535 -------------------------------------- heimdall/LICENSE | 19 -- 4 files changed, 19 insertions(+), 573 deletions(-) create mode 100644 LICENSE delete mode 100644 heimdall-frontend/doc-pak/LICENSE delete mode 100644 heimdall-frontend/doc-pak/README delete mode 100644 heimdall/LICENSE diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..d355526 --- /dev/null +++ b/LICENSE @@ -0,0 +1,19 @@ +Copyright (c) 2010-2013 Benjamin Dobell, Glass Echidna + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/heimdall-frontend/doc-pak/LICENSE b/heimdall-frontend/doc-pak/LICENSE deleted file mode 100644 index 680dad9..0000000 --- a/heimdall-frontend/doc-pak/LICENSE +++ /dev/null @@ -1,19 +0,0 @@ -Copyright (c) 2010-2012 Benjamin Dobell, Glass Echidna - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -THE SOFTWARE. diff --git a/heimdall-frontend/doc-pak/README b/heimdall-frontend/doc-pak/README deleted file mode 100644 index a181796..0000000 --- a/heimdall-frontend/doc-pak/README +++ /dev/null @@ -1,535 +0,0 @@ -Heimdall (c) 2010-2012 Benjamin Dobell, Glass Echidna -http://www.glassechidna.com.au/products/heimdall/ - -DISCLAIMER: - - This software attempts to flash your Galaxy S device. The very nature of - flashing is dangerous. As with all flashing software, Heimdall has the - potential to damage (brick) your device if not used carefully. If you're - concerned, don't use this software. Flashing ROMs onto your phone may also - void your warranty. Benjamin Dobell and Glass Echidna are not responsible - for the result of your actions. - - -These instructions are for Linux operating systems. - - -Flashing Heimdall Firmware Package with Heimdall Frontend: - - As of Heimdall Frontend 1.3 there are now two main ways to flash a ROM from - Heimdall Frontend. The simpler and preferred option is to download a - Heimdall Firmware Package and follow the following steps. - - - 1. Fully charge your device (use the wall charger as it's faster). - - 2. Open the a terminal and run Heimdall Frontend by typing: - - heimdall-frontend - - 3. From the "Load Package" tab, under the "Heimdall Firmware Package" - section click the "Browse" button. - - 4. Use the dialogue that appears to navigate to, and select, the Heimdall - firmware package that you wish to flash. - - 5. You will see progress bars appear as the package is decompressed and - extracted. - - When the package has finished being decompressed you should see - information about the particular firmware package that has been - selected. - - 6. Verify that your device is listed under "Supported Devices". If it's not - then STOP immediately! DO NOT flash this firmware to your device! - Instead search for an appropriate firmware package for your device. - - If you believe there is a mistake and your device is actually - supported please get in contact with the firmware developer (not Glass - Echidna!) and ask them to rectify the issue. If the developer provided - a URL you may be able to contact them by pressing the "Homepage" button. - - 7. If you've verified your device is supported you may continue to press - the "Load / Customise" button. - - 8. You should now be looking at the "Flash" tab. If not verify that you did - in fact push the "Load / Customise" button. - - Generally, you won't NEED or WANT to customise a firmware package! In - which case you can safely move on to step 9. - - Nonetheless, the "Flash" tab provides you with a means to customise the - firmware package before flashing it to your device. See "Performing a - Custom Flash with Heimdall Frontend" for more details. - - 9. Put your Galaxy S device into download mode and plug it in to your PC. - - Download mode can be accessed several different ways depending on your - particular device model. If you're unsure how to do this please search - online for the appropriate method. - - 10. Press the "Start" button. - - 11. Heimdall Frontend will display the progress and inform you when the - flash is complete. - - If something went wrong i.e. your device wasn't detected because it - wasn't in download mode, then the status section will let you know the - cause of the problem. - - - -Performing a Custom Flash with Heimdall Frontend: - - This is the advanced means of flashing firmware to your device. - - If you're not an advanced user or a developer, in the event that a Heimdall - Firmware Package doesn't exist for the particular firmware (or files) that - you wish to flash, then I strongly recommend you get in touch with the - developer of the firmware (or files) and politely ask them to create a - Heimdall Firmware Package for you. In doing so, you avoid the risk of - making mistakes due to inexperience. - - - If you're looking to customise an existing Heimdall Firmware Package then - follow steps 1-8 of "Flashing Heimdall Firmware Package with Heimdall - Frontend" then start from below with step 5. - - - 1. Fully charge your device (use the wall charger as it's faster). - - 2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package - and extract everything to the one directory. - - 3. If the ROM is not a Heimdall Firmware Package it may instead be provided - as multiple archives (nested or otherwise), extract them all to the same - location. - - NOTE: If you want to use the CSC then extract it last. If you're asked - to overwrite files then do so. - - 3. Open the a terminal and run Heimdall Frontend by typing: - - heimdall-frontend - - 4. Select the "Flash" tab. From the "Flash" tab you're able to completely - customise a flash. - - 5. Before you can chose which partitions you want to flash with particular - files you MUST first select a PIT file. To do this click the "Browse" - button in the "PIT" section. This will open a dialogue allowing you to - navigate to and select a valid PIT (.pit) file. - - If you do not already have a valid PIT file stored on your computer you - can download your device's PIT file from the "Utilities" tab. - - 6. If a valid PIT file has been selected then the "Add" button below the - "Partitions (Files)" list-box will be enabled. Press this button to add - a partition to your flash. - - 7. When you first add a partition you will see the "Partition Name" and - "Partition ID" be populated with information. Use the "Partition Name" - drop down to select which partition you wish to flash. "Partition ID" - will automatically update and is never directly editable. - - 8. You must then select a file to flash to the partition that you just - specified using the "Browse" button under the "File / Partition". You - will not be able to flash, create a firmware package or add another - partition until you have selected a file. However, you're still able to - press the "Remove" button if you've decided not to flash the partition - you've just specified. - - 9. When you've specified a file name then you'll be able to see the updated - information in the partition list to the right. You can select any - partition from this list and customise it as you see fit. - - You can also remove a partition from the list by selecting it and - clicking the "Remove" button. Removing a partition from the list doesn't - remove it from your device, it simply means it will not be flashed. - - 10. Repeat steps 7-9 as often as needed to specify all the partions/files - that you wish to flash. - - 11. Now you can chose whether you would like to repartition your device as - well as whether you would like to prevent the device rebooting once a - flash has been completed. These options can be enabled or disabled by - toggling the "Repartition" and "No Reboot" check-boxes. - - In the general case you will only need to enable repartition if you wish - to change the PIT file on your device. Keep in mind that repartitioning - will wipe your device! - - The "No Reboot" option is rarely required. It's mostly in place so you - can manually boot straight into recovery mode after a flash (rather than - booting up normally). - - 12. If you've added at least one partition to your flash (and selected a - file for that partition) then the "Start" button will be enabled. Press - the "Start" button to begin the flashing process. - - You may notice that the "Create Package" tab becomes available at the - whenever the "Start" button becomes available. From this tab you're able - to create a reusable, redistributable Heimdall Firmware Package with the - files and partitions you just selected. See "How to Create a Heimdall - Firmware Package" for details. - - 13. Heimdall Frontend will display the progress and inform you when the - flash is complete. - - If something went wrong i.e. your device wasn't detected because it - wasn't in download mode, then the status section will let you know the - cause of the problem. - - - -Flashing Firmware from Command Line: - - 1. Fully charge your phone (use the wall charger as it's faster). - - 2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package - and extract everything to the one directory. - - 3. If the ROM is not a Heimdall Firmware Package it may instead be provided - as multiple archives (nested or otherwise), extract them all to the same - location. - - NOTE: If you want to use the CSC then extract it last. - - 4. Put your Galaxy S device into download mode and plug it in.. - - 5. Open a terminal and navigate to the directory where you extracted - the ROM/firmware files. - - 6. Type the following to list all the functionality Heimdall supports: - - heimdall help - - 7. Use the instructions to manually enter a command with all the files you - want to flash. - - Here is an example that does a full flash and repartition on a GT-I9000: - - heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin - - - 8. Heimdall will display the progress as it flashes so that you know things - are working as they should. - - - -How to Create a Heimdall Firmware Package: - - Firstly, Heimdall's firmware package format is just a regular TAR archive - compressed with gzip. The only two real requirements are that a valid - firmware.xml must be included (refer to Appendix A) and you can only - include files (no directories, links etc.) As such if you'd like there is - nothing preventing you from creating Heimdall packages manually. Of course - Heimdall Frontend provides a simple user interface that takes care of all - the hard work for you. - - There are two ways in which you can create a firmware package. You can - create a package from scratch, or you can load an existing package, apply - modifications and then save the package. Creating a package from scratch - is the preferred approach, by taking this approach you're far less likely - to run into file name length limitations. - - Before you can access Heimdall Frontend's firmware creation functionality - (available from the "Create Package" tab) you must first specify which - files will be included in your package, as well as a few flashing options - i.e. Whether or not users should repartition when flashing. This - information must be filled out from the "Flash" tab in exactly the same - fashion you would provide information to flash your device (see "Performing - a Custom Flash with Heimdall Frontend"). As mentioned above, it's not the - preferred means, but you're able to load an existing package as a starting - point for this information. - - Once you've specified the files/partitions you wish to include in your - firmware package the "Create Package" tab will become available. Clicking - this tab will display additional information that you can include in your - package. In order to continue you must fill out all sections except for the - URLs section, which is optional. The following is a break-down of what all - these options mean. - - - General Firmware Information: - - - Firmware Name - This is the name of your particular firmware. An - example would be "Cyanogenmod". - - Firmware Version - This is the version identifier for your package. Any - valid string will be accepted, although the inclusion of decimal - point version number is preferred i.e. "7.1". If it makes sense - then feel free to append a text string like "RC1" or "Beta 1" to - the decimal point version. - - Platform Name - This is the name of platform (or operating system) that - your firmware is based on. In most cases this will simply be - "Android". - - Platform Version - This is the operating system version that your - firmware is based on. Again decimal point version numbers are - preferred over text, i.e. "2.3.4" is preferred over "Gingerbread". - - - - Developers - - - URLs (Optional): - - Homepage - Here you can enter your personal URL or a URL particularly - pertaining to the firmware being packaged. The URL must be well - formed for it to work. An example of a well formed URL is - "http://www.glassechidna.com.au/products/heimdall/". It is - important to include "http://" in order to specify the protocol as - other protocols such as "ftp://" are equally valid although - unlikely to be used. - - Donate - Here you can enter a URL that will link users to a page to - make donations for the effort you've put into developing your - firmware. Once again the URL must be well formed but there is no - requirement on how your donation page should work. For instance - both "http://www.glassechidna.com.au/donate/" and - "http://forum.xda-developers.com/donatetome.php?u=2710388" are - equally valid. - - Developer Info: - - Name - Here you can enter in the name of individual team members or a - team name. Click "Add" and the developer will be added to the list - on the right. If you make a mistake you can select a developer from - the list and click "Remove". You can list as many developers as you - like, however visual constraints of the "Load Package" tab means - only a few names will be visible. Where possible you may want to - opt for team names over listing individual team members. - - - - Supported Devices - - - This section allows you to create a list of devices that are supported by - your particular firmware. Although Heimdall isn't capable of enforcing this - we strongly recommend you take this section seriously. If filled out - correctly you could help save a number of accidental bricks! - - Device Info: - - Manufacturer - This is where you can enter the name of the manufacturer - for a particular device. For now this will most likely be - "Samsung". - - Name - This is the human readable name for a particular device. - "Galaxy S", "Galaxy S II", "Droid Charge", "Vibrant" and - "Galaxy S (Telstra)" are all valid names. There are a lot of - possible variations here so be as specific as you think is - necessary. - - Product Code - This is by far the most important bit of device - information. Device names tend to be region specific and further - subject to the whims of telecommunication companies and resellers. - Product Codes (or product IDs) are designated by manufacturers and - are generally the definitive means of referring to a particular - device. Examples are "GT-I9000", "GT-I9100" and "SCH-I897". If - you're unsure of a particular product code then both Google and - GSMArena are your friends! - - - After filling out all the necessary information the "Build" button will be - enabled. If it's still disabled then you know you're missing some required - information. In particular you must specify at least one developer and at - least one supported device. Pressing the "Build" button will bring up a - save dialogue where you must chose a file name for your particular package. - Don't worry about specifying the ".tar.gz" extension Heimdall Frontend will - take care of this automatically. - - Once you've chosen a file name Heimdall Frontend will begin the process of - building the firmware package. In doing so a valid firmware.xml file will - be generated from the information entered. All files will be archived in a - single TAR file then the TAR archive will be compressed via gzip - compression. Compression will take a little while but you will see progress - bars so you know the application hasn't hung. When the progress bars - disappear you're finished making your package. - - Congratulations! You're now ready to redistribute your firmware package - online or by any means you see fit. - - - -Appendix A - firmware.xml - -The following details a part of the Heimdall Firmware Package format. This -is only relevant to developers or advanced users who wish to create Heimdall -Firmware Packages outside of Heimdall Frontend or in some way integrate support -for the format in their own software. - - -All Heimdall Firmware Packages must contain a file called firmware.xml. This -file stores flash information and meta-data for the package as well as -information about other files contained within the package. - - -The format is fairly straight-forward so it won't be explained in great detail. -Nonetheless the following is an example of a valid firmware.xml file. - - - - Test Firmware - 1.1 - - Android - 2.3.4 - - - Benjamin Dobell - Hedonism Bot - - http://www.glassechidna.com.au/ - http://www.glassechidna.com.au/donate/ - - - Samsung - GT-I9000 - Galaxy S - - - Samsung - GT-I9000T - Galaxy S (Telstra) - - - Samsung - GT-I9000M - Vibrant - - - Nl3276-I9000 s1_odin_20100512.pit - 0 - 0 - - - 0 - gq3276-boot.bin - - - 24 - Uh3276-cache.rfs - - - 22 - em3276-factoryfs.rfs - - - 11 - fl3276-modem.bin - - - 21 - Xd3276-param.lfs - - - 3 - if3276-Sbl.bin - - - 6 - cr3276-zImage - - - - - -New lines need not be included and the order in which elements are specified -does not need to match that of the above example. - -One and only one element must be included. The element -must also have a version attribute specified. The version must be parsable as -an integer and indicates what version of the Heimdall Firmware Package -specification the package adheres to. - -All data is stored as strings, however a 's element must be parsable -as an integer. The value represents the partition ID (according to the -specified PIT file) that the file should be flashed to. - -A 's and elements must also be parsable as -an integer. However, as they represent boolean values, a value of zero ("0") -means false (or disabled) where as a non-zero value (typically "1") means true -(or enabled). - -File names are specified relative to the TAR archive in which firmware.xml and -all other files are to be stored. Heimdall Firmware Packages do not support -directories or links, as such file names should only be a name and not a path. - - and are the only optional elements, all other elements must -be included. - - - -Appendix B - Installing Heimdall from Source: - - 1. First make sure you have installed build-tools, pkgconfig, zlib-dev and - libusb-1.0-dev (v1.0.8 or newer). - - NOTE: Package names may not be absolutely identical to those above. - - 2. Open a terminal and navigate to the directory you downloaded, - or extracted, Heimdall to. - - 3. Enter the following commands to compile libpit: - - cd libpit - ./configure - make - cd .. - - If you have problems please consult http://www.libusb.org/ - - 4. Enter the following commands to compile libpit. - - cd libusb-1.0 - ./configure - make - cd .. - - NOTE: There is no need to run "sudo make install". - - 4. Enter the following commands to compile and install Heimdall: - - cd heimdall - ./configure - make - sudo make install - cd .. - - NOTE: As an alternative to "sudo make install" you may chose to generate - a package by typing the following: - - sudo checkinstall --pkgversion - - Where is the current Heimdall release e.g. 1.3.0 - - 5. Done - - - -Appendix C - Installing Heimdall Frontend from Source: - - 1. Compile and install Heimdall, see Appendix B. - - 2. First make sure you have installed Qt 4.7 or later, available from: - - http://qt.nokia.com/downloads/ - - 3. Open a terminal and navigate to the directory you extracted Heimdall to. - - 4. Enter the following commands to compile and install Heimdall Frontend: - - cd heimdall-frontend - qmake-qt4 heimdall-frontend.pro - make - sudo make install - - NOTE: As an alternative to "sudo make install" you may chose to generate - a package by typing the following: - - sudo checkinstall --pkgversion - - Where is the current Heimdall release e.g. 1.3.0 - - 5. Done - diff --git a/heimdall/LICENSE b/heimdall/LICENSE deleted file mode 100644 index d355526..0000000 --- a/heimdall/LICENSE +++ /dev/null @@ -1,19 +0,0 @@ -Copyright (c) 2010-2013 Benjamin Dobell, Glass Echidna - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -THE SOFTWARE. -- cgit v1.2.3