/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "recovery.h"
#include <ctype.h>
#include <errno.h>
#include <getopt.h>
#include <inttypes.h>
#include <limits.h>
#include <linux/input.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <unistd.h>
#include <functional>
#include <iterator>
#include <memory>
#include <string>
#include <vector>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/parseint.h>
#include <android-base/properties.h>
#include <android-base/stringprintf.h>
#include <android-base/strings.h>
#include <cutils/properties.h> /* for property_list */
#include <fs_mgr/roots.h>
#include <healthhalutils/HealthHalUtils.h>
#include <ziparchive/zip_archive.h>
#include "bootloader_message/bootloader_message.h"
#include "fsck_unshare_blocks.h"
#include "install/adb_install.h"
#include "install/fuse_install.h"
#include "install/install.h"
#include "install/package.h"
#include "install/wipe_data.h"
#include "install/wipe_device.h"
#include "otautil/boot_state.h"
#include "otautil/error_code.h"
#include "otautil/paths.h"
#include "otautil/sysutil.h"
#include "recovery_ui/screen_ui.h"
#include "recovery_ui/ui.h"
#include "recovery_utils/logging.h"
#include "recovery_utils/roots.h"
static constexpr const char* COMMAND_FILE = "/cache/recovery/command";
static constexpr const char* LAST_KMSG_FILE = "/cache/recovery/last_kmsg";
static constexpr const char* LAST_LOG_FILE = "/cache/recovery/last_log";
static constexpr const char* LOCALE_FILE = "/cache/recovery/last_locale";
static constexpr const char* CACHE_ROOT = "/cache";
static bool save_current_log = false;
/*
* The recovery tool communicates with the main system through /cache files.
* /cache/recovery/command - INPUT - command line for tool, one arg per line
* /cache/recovery/log - OUTPUT - combined log file from recovery run(s)
*
* The arguments which may be supplied in the recovery.command file:
* --update_package=path - verify install an OTA package file
* --install_with_fuse - install the update package with FUSE. This allows installation of large
* packages on LP32 builds. Since the mmap will otherwise fail due to out of memory.
* --wipe_data - erase user data (and cache), then reboot
* --prompt_and_wipe_data - prompt the user that data is corrupt, with their consent erase user
* data (and cache), then reboot
* --wipe_cache - wipe cache (but not user data), then reboot
* --show_text - show the recovery text menu, used by some bootloader (e.g. http://b/36872519).
* --set_encrypted_filesystem=on|off - enables / diasables encrypted fs
* --just_exit - do nothing; exit and reboot
*
* After completing, we remove /cache/recovery/command and reboot.
* Arguments may also be supplied in the bootloader control block (BCB).
* These important scenarios must be safely restartable at any point:
*
* FACTORY RESET
* 1. user selects "factory reset"
* 2. main system writes "--wipe_data" to /cache/recovery/command
* 3. main system reboots into recovery
* 4. get_args() writes BCB with "boot-recovery" and "--wipe_data"
* -- after this, rebooting will restart the erase --
* 5. erase_volume() reformats /data
* 6. erase_volume() reformats /cache
* 7. FinishRecovery() erases BCB
* -- after this, rebooting will restart the main system --
* 8. main() calls reboot() to boot main system
*
* OTA INSTALL
* 1. main system downloads OTA package to /cache/some-filename.zip
* 2. main system writes "--update_package=/cache/some-filename.zip"
* 3. main system reboots into recovery
* 4. get_args() writes BCB with "boot-recovery" and "--update_package=..."
* -- after this, rebooting will attempt to reinstall the update --
* 5. InstallPackage() attempts to install the update
* NOTE: the package install must itself be restartable from any point
* 6. FinishRecovery() erases BCB
* -- after this, rebooting will (try to) restart the main system --
* 7. ** if install failed **
* 7a. PromptAndWait() shows an error icon and waits for the user
* 7b. the user reboots (pulling the battery, etc) into the main system
*/
static bool IsRoDebuggable() {
return android::base::GetBoolProperty("ro.debuggable", false);
}
// Clear the recovery command and prepare to boot a (hopefully working) system,
// copy our log file to cache as well (for the system to read). This function is
// idempotent: call it as many times as you like.
static void FinishRecovery(RecoveryUI* ui) {
std::string locale = ui->GetLocale();
// Save the locale to cache, so if recovery is next started up without a '--locale' argument
// (e.g., directly from the bootloader) it will use the last-known locale.
if (!locale.empty() && HasCache()) {
LOG(INFO) << "Saving locale \"" << locale << "\"";
if (ensure_path_mounted(LOCALE_FILE) != 0) {
LOG(ERROR) << "Failed to mount " << LOCALE_FILE;
} else if (!android::base::WriteStringToFile(locale, LOCALE_FILE)) {
PLOG(ERROR) << "Failed to save locale to " << LOCALE_FILE;
}
}
copy_logs(save_current_log);
// Reset to normal system boot so recovery won't cycle indefinitely.
std::string err;
if (!clear_bootloader_message(&err)) {
LOG(ERROR) << "Failed to clear BCB message: " << err;
}
// Remove the command file, so recovery won't repeat indefinitely.
if (HasCache()) {
if (ensure_path_mounted(COMMAND_FILE) != 0 || (unlink(COMMAND_FILE) && errno != ENOENT)) {
LOG(WARNING) << "Can't unlink " << COMMAND_FILE;
}
ensure_path_unmounted(CACHE_ROOT);
}
sync(); // For good measure.
}
static bool yes_no(Device* device, const char* question1, const char* question2) {
std::vector<std::string> headers{ question1, question2 };
std::vector<std::string> items{ " No", " Yes" };
size_t chosen_item = device->GetUI()->ShowMenu(
headers, items, 0, true,
std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));
return (chosen_item == 1);
}
static bool ask_to_wipe_data(Device* device) {
std::vector<std::string> headers{ "Wipe all user data?", " THIS CAN NOT BE UNDONE!" };
std::vector<std::string> items{ " Cancel", " Factory data reset" };
size_t chosen_item = device->GetUI()->ShowPromptWipeDataConfirmationMenu(
headers, items,
std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));
return (chosen_item == 1);
}
static InstallResult prompt_and_wipe_data(Device* device) {
// Use a single string and let ScreenRecoveryUI handles the wrapping.
std::vector<std::string> wipe_data_menu_headers{
"Can't load Android system. Your data may be corrupt. "
"If you continue to get this message, you may need to "
"perform a factory data reset and erase all user data "
"stored on this device.",
};
// clang-format off
std::vector<std::string> wipe_data_menu_items {
"Try again",
"Factory data reset",
};
// clang-format on
for (;;) {
size_t chosen_item = device->GetUI()->ShowPromptWipeDataMenu(
wipe_data_menu_headers, wipe_data_menu_items,
std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));
// If ShowMenu() returned RecoveryUI::KeyError::INTERRUPTED, WaitKey() was interrupted.
if (chosen_item == static_cast<size_t>(RecoveryUI::KeyError::INTERRUPTED)) {
return INSTALL_KEY_INTERRUPTED;
}
if (chosen_item != 1) {
return INSTALL_SUCCESS; // Just reboot, no wipe; not a failure, user asked for it
}
if (ask_to_wipe_data(device)) {
CHECK(device->GetReason().has_value());
bool convert_fbe = device->GetReason().value() == "convert_fbe";
if (WipeData(device, convert_fbe)) {
return INSTALL_SUCCESS;
} else {
return INSTALL_ERROR;
}
}
}
}
static void choose_recovery_file(Device* device) {
std::vector<std::string> entries;
if (HasCache()) {
for (int i = 0; i < KEEP_LOG_COUNT; i++) {
auto add_to_entries = [&](const char* filename) {
std::string log_file(filename);
if (i > 0) {
log_file += "." + std::to_string(i);
}
if (ensure_path_mounted(log_file) == 0 && access(log_file.c_str(), R_OK) == 0) {
entries.push_back(std::move(log_file));
}
};
// Add LAST_LOG_FILE + LAST_LOG_FILE.x
add_to_entries(LAST_LOG_FILE);
// Add LAST_KMSG_FILE + LAST_KMSG_FILE.x
add_to_entries(LAST_KMSG_FILE);
}
} else {
// If cache partition is not found, view /tmp/recovery.log instead.
if (access(Paths::Get().temporary_log_file().c_str(), R_OK) == -1) {
return;
} else {
entries.push_back(Paths::Get().temporary_log_file());
}
}
entries.push_back("Back");
std::vector<std::string> headers{ "Select file to view" };
size_t chosen_item = 0;
while (true) {
chosen_item = device->GetUI()->ShowMenu(
headers, entries, chosen_item, true,
std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));
// Handle WaitKey() interrupt.
if (chosen_item == static_cast<size_t>(RecoveryUI::KeyError::INTERRUPTED)) {
break;
}
if (entries[chosen_item] == "Back") break;
device->GetUI()->ShowFile(entries[chosen_item]);
}
}
static void run_graphics_test(RecoveryUI* ui) {
// Switch to graphics screen.
ui->ShowText(false);
ui->SetProgressType(RecoveryUI::INDETERMINATE);
ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
sleep(1);
ui->SetBackground(RecoveryUI::ERROR);
sleep(1);
ui->SetBackground(RecoveryUI::NO_COMMAND);
sleep(1);
ui->SetBackground(RecoveryUI::ERASING);
sleep(1);
// Calling SetBackground() after SetStage() to trigger a redraw.
ui->SetStage(1, 3);
ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
sleep(1);
ui->SetStage(2, 3);
ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
sleep(1);
ui->SetStage(3, 3);
ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
sleep(1);
ui->SetStage(-1, -1);
ui->SetBackground(RecoveryUI::INSTALLING_UPDATE);
ui->SetProgressType(RecoveryUI::DETERMINATE);
ui->ShowProgress(1.0, 10.0);
float fraction = 0.0;
for (size_t i = 0; i < 100; ++i) {
fraction += .01;
ui->SetProgress(fraction);
usleep(100000);
}
ui->ShowText(true);
}
// Shows the recovery UI and waits for user input. Returns one of the device builtin actions, such
// as REBOOT, SHUTDOWN, or REBOOT_BOOTLOADER. Returning NO_ACTION means to take the default, which
// is to reboot or shutdown depending on if the --shutdown_after flag was passed to recovery.
static Device::BuiltinAction PromptAndWait(Device* device, InstallResult status) {
auto ui = device->GetUI();
for (;;) {
FinishRecovery(ui);
switch (status) {
case INSTALL_SUCCESS:
case INSTALL_NONE:
case INSTALL_SKIPPED:
case INSTALL_RETRY:
case INSTALL_KEY_INTERRUPTED:
ui->SetBackground(RecoveryUI::NO_COMMAND);
break;
case INSTALL_ERROR:
case INSTALL_CORRUPT:
ui->SetBackground(RecoveryUI::ERROR);
break;
case INSTALL_REBOOT:
// All the reboots should have been handled prior to entering PromptAndWait() or immediately
// after installing a package.
LOG(FATAL) << "Invalid status code of INSTALL_REBOOT";
break;
}
ui->SetProgressType(RecoveryUI::EMPTY);
size_t chosen_item = ui->ShowMenu(
{}, device->GetMenuItems(), 0, false,
std::bind(&Device::HandleMenuKey, device, std::placeholders::_1, std::placeholders::_2));
// Handle Interrupt key
if (chosen_item == static_cast<size_t>(RecoveryUI::KeyError::INTERRUPTED)) {
return Device::KEY_INTERRUPTED;
}
// Device-specific code may take some action here. It may return one of the core actions
// handled in the switch statement below.
Device::BuiltinAction chosen_action =
(chosen_item == static_cast<size_t>(RecoveryUI::KeyError::TIMED_OUT))
? Device::REBOOT
: device->InvokeMenuItem(chosen_item);
switch (chosen_action) {
case Device::REBOOT_FROM_FASTBOOT: // Can not happen
case Device::SHUTDOWN_FROM_FASTBOOT: // Can not happen
case Device::NO_ACTION:
break;
case Device::ENTER_FASTBOOT:
case Device::ENTER_RECOVERY:
case Device::REBOOT:
case Device::REBOOT_BOOTLOADER:
case Device::REBOOT_FASTBOOT:
case Device::REBOOT_RECOVERY:
case Device::REBOOT_RESCUE:
case Device::SHUTDOWN:
return chosen_action;
case Device::WIPE_DATA:
save_current_log = true;
if (ui->IsTextVisible()) {
if (ask_to_wipe_data(device)) {
WipeData(device, false);
}
} else {
WipeData(device, false);
return Device::NO_ACTION;
}
break;
case Device::WIPE_CACHE: {
save_current_log = true;
std::function<bool()> confirm_func = [&device]() {
return yes_no(device, "Wipe cache?", " THIS CAN NOT BE UNDONE!");
};
WipeCache(ui, ui->IsTextVisible() ? confirm_func : nullptr);
if (!ui->IsTextVisible()) return Device::NO_ACTION;
break;
}
case Device::APPLY_ADB_SIDELOAD:
case Device::APPLY_SDCARD:
case Device::ENTER_RESCUE: {
save_current_log = true;
bool adb = true;
Device::BuiltinAction reboot_action;
if (chosen_action == Device::ENTER_RESCUE) {
// Switch to graphics screen.
ui->ShowText(false);
status = ApplyFromAdb(device, true /* rescue_mode */, &reboot_action);
} else if (chosen_action == Device::APPLY_ADB_SIDELOAD) {
status = ApplyFromAdb(device, false /* rescue_mode */, &reboot_action);
} else {
adb = false;
status = ApplyFromSdcard(device);
}
ui->Print("\nInstall from %s completed with status %d.\n", adb ? "ADB" : "SD card", status);
if (status == INSTALL_REBOOT) {
return reboot_action;
}
if (status != INSTALL_SUCCESS) {
ui->SetBackground(RecoveryUI::ERROR);
ui->Print("Installation aborted.\n");
copy_logs(save_current_log);
} else if (!ui->IsTextVisible()) {
return Device::NO_ACTION; // reboot if logs aren't visible
}
break;
}
case Device::VIEW_RECOVERY_LOGS:
choose_recovery_file(device);
break;
case Device::RUN_GRAPHICS_TEST:
run_graphics_test(ui);
break;
case Device::RUN_LOCALE_TEST: {
ScreenRecoveryUI* screen_ui = static_cast<ScreenRecoveryUI*>(ui);
screen_ui->CheckBackgroundTextImages();
break;
}
case Device::MOUNT_SYSTEM:
if (ensure_path_mounted_at(android::fs_mgr::GetSystemRoot(), "/mnt/system") != -1) {
ui->Print("Mounted /system.\n");
}
break;
case Device::KEY_INTERRUPTED:
return Device::KEY_INTERRUPTED;
}
}
}
static void print_property(const char* key, const char* name, void* /* cookie */) {
printf("%s=%s\n", key, name);
}
static bool is_battery_ok(int* required_battery_level) {
using android::hardware::health::V1_0::BatteryStatus;
using android::hardware::health::V2_0::get_health_service;
using android::hardware::health::V2_0::IHealth;
using android::hardware::health::V2_0::Result;
using android::hardware::health::V2_0::toString;
android::sp<IHealth> health = get_health_service();
static constexpr int BATTERY_READ_TIMEOUT_IN_SEC = 10;
int wait_second = 0;
while (true) {
auto charge_status = BatteryStatus::UNKNOWN;
if (health == nullptr) {
LOG(WARNING) << "no health implementation is found, assuming defaults";
} else {
health
->getChargeStatus([&charge_status](auto res, auto out_status) {
if (res == Result::SUCCESS) {
charge_status = out_status;
}
})
.isOk(); // should not have transport error
}
// Treat unknown status as charged.
bool charged = (charge_status != BatteryStatus::DISCHARGING &&
charge_status != BatteryStatus::NOT_CHARGING);
Result res = Result::UNKNOWN;
int32_t capacity = INT32_MIN;
if (health != nullptr) {
health
->getCapacity([&res, &capacity](auto out_res, auto out_capacity) {
res = out_res;
capacity = out_capacity;
})
.isOk(); // should not have transport error
}
LOG(INFO) << "charge_status " << toString(charge_status) << ", charged " << charged
<< ", status " << toString(res) << ", capacity " << capacity;
// At startup, the battery drivers in devices like N5X/N6P take some time to load
// the battery profile. Before the load finishes, it reports value 50 as a fake
// capacity. BATTERY_READ_TIMEOUT_IN_SEC is set that the battery drivers are expected
// to finish loading the battery profile earlier than 10 seconds after kernel startup.
if (res == Result::SUCCESS && capacity == 50) {
if (wait_second < BATTERY_READ_TIMEOUT_IN_SEC) {
sleep(1);
wait_second++;
continue;
}
}
// If we can't read battery percentage, it may be a device without battery. In this
// situation, use 100 as a fake battery percentage.
if (res != Result::SUCCESS) {
capacity = 100;
}
// GmsCore enters recovery mode to install package when having enough battery percentage.
// Normally, the threshold is 40% without charger and 20% with charger. So we should check
// battery with a slightly lower limitation.
static constexpr int BATTERY_OK_PERCENTAGE = 20;
static constexpr int BATTERY_WITH_CHARGER_OK_PERCENTAGE = 15;
*required_battery_level = charged ? BATTERY_WITH_CHARGER_OK_PERCENTAGE : BATTERY_OK_PERCENTAGE;
return capacity >= *required_battery_level;
}
}
// Set the retry count to |retry_count| in BCB.
static void set_retry_bootloader_message(int retry_count, const std::vector<std::string>& args) {
std::vector<std::string> options;
for (const auto& arg : args) {
if (!android::base::StartsWith(arg, "--retry_count")) {
options.push_back(arg);
}
}
// Update the retry counter in BCB.
options.push_back(android::base::StringPrintf("--retry_count=%d", retry_count));
std::string err;
if (!update_bootloader_message(options, &err)) {
LOG(ERROR) << err;
}
}
static bool bootreason_in_blacklist() {
std::string bootreason = android::base::GetProperty("ro.boot.bootreason", "");
if (!bootreason.empty()) {
// More bootreasons can be found in "system/core/bootstat/bootstat.cpp".
static const std::vector<std::string> kBootreasonBlacklist{
"kernel_panic",
"Panic",
};
for (const auto& str : kBootreasonBlacklist) {
if (android::base::EqualsIgnoreCase(str, bootreason)) return true;
}
}
return false;
}
static void log_failure_code(ErrorCode code, const std::string& update_package) {
std::vector<std::string> log_buffer = {
update_package,
"0", // install result
"error: " + std::to_string(code),
};
std::string log_content = android::base::Join(log_buffer, "\n");
const std::string& install_file = Paths::Get().temporary_install_file();
if (!android::base::WriteStringToFile(log_content, install_file)) {
PLOG(ERROR) << "Failed to write " << install_file;
}
// Also write the info into last_log.
LOG(INFO) << log_content;
}
Device::BuiltinAction start_recovery(Device* device, const std::vector<std::string>& args) {
static constexpr struct option OPTIONS[] = {
{ "fastboot", no_argument, nullptr, 0 },
{ "fsck_unshare_blocks", no_argument, nullptr, 0 },
{ "install_with_fuse", no_argument, nullptr, 0 },
{ "just_exit", no_argument, nullptr, 'x' },
{ "locale", required_argument, nullptr, 0 },
{ "prompt_and_wipe_data", no_argument, nullptr, 0 },
{ "reason", required_argument, nullptr, 0 },
{ "rescue", no_argument, nullptr, 0 },
{ "retry_count", required_argument, nullptr, 0 },
{ "security", no_argument, nullptr, 0 },
{ "show_text", no_argument, nullptr, 't' },
{ "shutdown_after", no_argument, nullptr, 0 },
{ "sideload", no_argument, nullptr, 0 },
{ "sideload_auto_reboot", no_argument, nullptr, 0 },
{ "update_package", required_argument, nullptr, 0 },
{ "wipe_ab", no_argument, nullptr, 0 },
{ "wipe_cache", no_argument, nullptr, 0 },
{ "wipe_data", no_argument, nullptr, 0 },
{ "wipe_package_size", required_argument, nullptr, 0 },
{ nullptr, 0, nullptr, 0 },
};
const char* update_package = nullptr;
bool install_with_fuse = false; // memory map the update package by default.
bool should_wipe_data = false;
bool should_prompt_and_wipe_data = false;
bool should_wipe_cache = false;
bool should_wipe_ab = false;
size_t wipe_package_size = 0;
bool sideload = false;
bool sideload_auto_reboot = false;
bool rescue = false;
bool just_exit = false;
bool shutdown_after = false;
bool fsck_unshare_blocks = false;
int retry_count = 0;
bool security_update = false;
std::string locale;
auto args_to_parse = StringVectorToNullTerminatedArray(args);
int arg;
int option_index;
// Parse everything before the last element (which must be a nullptr). getopt_long(3) expects a
// null-terminated char* array, but without counting null as an arg (i.e. argv[argc] should be
// nullptr).
while ((arg = getopt_long(args_to_parse.size() - 1, args_to_parse.data(), "", OPTIONS,
&option_index)) != -1) {
switch (arg) {
case 't':
// Handled in recovery_main.cpp
break;
case 'x':
just_exit = true;
break;
case 0: {
std::string option = OPTIONS[option_index].name;
if (option == "fsck_unshare_blocks") {
fsck_unshare_blocks = true;
} else if (option == "install_with_fuse") {
install_with_fuse = true;
} else if (option == "locale" || option == "fastboot" || option == "reason") {
// Handled in recovery_main.cpp
} else if (option == "prompt_and_wipe_data") {
should_prompt_and_wipe_data = true;
} else if (option == "rescue") {
rescue = true;
} else if (option == "retry_count") {
android::base::ParseInt(optarg, &retry_count, 0);
} else if (option == "security") {
security_update = true;
} else if (option == "sideload") {
sideload = true;
} else if (option == "sideload_auto_reboot") {
sideload = true;
sideload_auto_reboot = true;
} else if (option == "shutdown_after") {
shutdown_after = true;
} else if (option == "update_package") {
update_package = optarg;
} else if (option == "wipe_ab") {
should_wipe_ab = true;
} else if (option == "wipe_cache") {
should_wipe_cache = true;
} else if (option == "wipe_data") {
should_wipe_data = true;
} else if (option == "wipe_package_size") {
android::base::ParseUint(optarg, &wipe_package_size);
}
break;
}
case '?':
LOG(ERROR) << "Invalid command argument";
continue;
}
}
optind = 1;
printf("stage is [%s]\n", device->GetStage().value_or("").c_str());
printf("reason is [%s]\n", device->GetReason().value_or("").c_str());
auto ui = device->GetUI();
// Set background string to "installing security update" for security update,
// otherwise set it to "installing system update".
ui->SetSystemUpdateText(security_update);
int st_cur, st_max;
if (!device->GetStage().has_value() &&
sscanf(device->GetStage().value().c_str(), "%d/%d", &st_cur, &st_max) == 2) {
ui->SetStage(st_cur, st_max);
}
std::vector<std::string> title_lines =
android::base::Split(android::base::GetProperty("ro.bootimage.build.fingerprint", ""), ":");
title_lines.insert(std::begin(title_lines), "Android Recovery");
ui->SetTitle(title_lines);
ui->ResetKeyInterruptStatus();
device->StartRecovery();
printf("Command:");
for (const auto& arg : args) {
printf(" \"%s\"", arg.c_str());
}
printf("\n\n");
property_list(print_property, nullptr);
printf("\n");
InstallResult status = INSTALL_SUCCESS;
// next_action indicates the next target to reboot into upon finishing the install. It could be
// overridden to a different reboot target per user request.
Device::BuiltinAction next_action = shutdown_after ? Device::SHUTDOWN : Device::REBOOT;
if (update_package != nullptr) {
// It's not entirely true that we will modify the flash. But we want
// to log the update attempt since update_package is non-NULL.
save_current_log = true;
int required_battery_level;
if (retry_count == 0 && !is_battery_ok(&required_battery_level)) {
ui->Print("battery capacity is not enough for installing package: %d%% needed\n",
required_battery_level);
// Log the error code to last_install when installation skips due to
// low battery.
log_failure_code(kLowBattery, update_package);
status = INSTALL_SKIPPED;
} else if (retry_count == 0 && bootreason_in_blacklist()) {
// Skip update-on-reboot when bootreason is kernel_panic or similar
ui->Print("bootreason is in the blacklist; skip OTA installation\n");
log_failure_code(kBootreasonInBlacklist, update_package);
status = INSTALL_SKIPPED;
} else {
// It's a fresh update. Initialize the retry_count in the BCB to 1; therefore we can later
// identify the interrupted update due to unexpected reboots.
if (retry_count == 0) {
set_retry_bootloader_message(retry_count + 1, args);
}
if (update_package[0] == '@') {
ensure_path_mounted(update_package + 1);
} else {
ensure_path_mounted(update_package);
}
if (install_with_fuse) {
LOG(INFO) << "Installing package " << update_package << " with fuse";
status = InstallWithFuseFromPath(update_package, ui);
} else if (auto memory_package = Package::CreateMemoryPackage(
update_package,
std::bind(&RecoveryUI::SetProgress, ui, std::placeholders::_1));
memory_package != nullptr) {
status = InstallPackage(memory_package.get(), update_package, should_wipe_cache,
retry_count, ui);
} else {
// We may fail to memory map the package on 32 bit builds for packages with 2GiB+ size.
// In such cases, we will try to install the package with fuse. This is not the default
// installation method because it introduces a layer of indirection from the kernel space.
LOG(WARNING) << "Failed to memory map package " << update_package
<< "; falling back to install with fuse";
status = InstallWithFuseFromPath(update_package, ui);
}
if (status != INSTALL_SUCCESS) {
ui->Print("Installation aborted.\n");
// When I/O error or bspatch/imgpatch error happens, reboot and retry installation
// RETRY_LIMIT times before we abandon this OTA update.
static constexpr int RETRY_LIMIT = 4;
if (status == INSTALL_RETRY && retry_count < RETRY_LIMIT) {
copy_logs(save_current_log);
retry_count += 1;
set_retry_bootloader_message(retry_count, args);
// Print retry count on screen.
ui->Print("Retry attempt %d\n", retry_count);
// Reboot back into recovery to retry the update.
if (!Reboot("recovery")) {
ui->Print("Reboot failed\n");
} else {
while (true) {
pause();
}
}
}
// If this is an eng or userdebug build, then automatically
// turn the text display on if the script fails so the error
// message is visible.
if (IsRoDebuggable()) {
ui->ShowText(true);
}
}
}
} else if (should_wipe_data) {
save_current_log = true;
CHECK(device->GetReason().has_value());
bool convert_fbe = device->GetReason().value() == "convert_fbe";
if (!WipeData(device, convert_fbe)) {
status = INSTALL_ERROR;
}
} else if (should_prompt_and_wipe_data) {
// Trigger the logging to capture the cause, even if user chooses to not wipe data.
save_current_log = true;
ui->ShowText(true);
ui->SetBackground(RecoveryUI::ERROR);
status = prompt_and_wipe_data(device);
if (status != INSTALL_KEY_INTERRUPTED) {
ui->ShowText(false);
}
} else if (should_wipe_cache) {
save_current_log = true;
if (!WipeCache(ui, nullptr)) {
status = INSTALL_ERROR;
}
} else if (should_wipe_ab) {
if (!WipeAbDevice(device, wipe_package_size)) {
status = INSTALL_ERROR;
}
} else if (sideload) {
// 'adb reboot sideload' acts the same as user presses key combinations to enter the sideload
// mode. When 'sideload-auto-reboot' is used, text display will NOT be turned on by default. And
// it will reboot after sideload finishes even if there are errors. This is to enable automated
// testing.
save_current_log = true;
if (!sideload_auto_reboot) {
ui->ShowText(true);
}
status = ApplyFromAdb(device, false /* rescue_mode */, &next_action);
ui->Print("\nInstall from ADB complete (status: %d).\n", status);
if (sideload_auto_reboot) {
status = INSTALL_REBOOT;
ui->Print("Rebooting automatically.\n");
}
} else if (rescue) {
save_current_log = true;
status = ApplyFromAdb(device, true /* rescue_mode */, &next_action);
ui->Print("\nInstall from ADB complete (status: %d).\n", status);
} else if (fsck_unshare_blocks) {
if (!do_fsck_unshare_blocks()) {
status = INSTALL_ERROR;
}
} else if (!just_exit) {
// If this is an eng or userdebug build, automatically turn on the text display if no command
// is specified. Note that this should be called before setting the background to avoid
// flickering the background image.
if (IsRoDebuggable()) {
ui->ShowText(true);
}
status = INSTALL_NONE; // No command specified
ui->SetBackground(RecoveryUI::NO_COMMAND);
}
if (status == INSTALL_ERROR || status == INSTALL_CORRUPT) {
ui->SetBackground(RecoveryUI::ERROR);
if (!ui->IsTextVisible()) {
sleep(5);
}
}
// Determine the next action.
// - If the state is INSTALL_REBOOT, device will reboot into the target as specified in
// `next_action`.
// - If the recovery menu is visible, prompt and wait for commands.
// - If the state is INSTALL_NONE, wait for commands (e.g. in user build, one manually boots
// into recovery to sideload a package or to wipe the device).
// - In all other cases, reboot the device. Therefore, normal users will observe the device
// rebooting a) immediately upon successful finish (INSTALL_SUCCESS); or b) an "error" screen
// for 5s followed by an automatic reboot.
if (status != INSTALL_REBOOT) {
if (status == INSTALL_NONE || ui->IsTextVisible()) {
auto temp = PromptAndWait(device, status);
if (temp != Device::NO_ACTION) {
next_action = temp;
}
}
}
// Save logs and clean up before rebooting or shutting down.
FinishRecovery(ui);
return next_action;
}
