1 files changed, 900 insertions, 0 deletions

diff --git a/applypatch/applypatch.c b/applypatch/applypatch.c
new file mode 100644
index 000000000..daf372907
--- /dev/null
+++ b/applypatch/applypatch.c
@@ -0,0 +1,900 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <errno.h>
+#include <libgen.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include "mincrypt/sha.h"
+#include "applypatch.h"
+#include "mtdutils/mtdutils.h"
+
+int SaveFileContents(const char* filename, FileContents file);
+int LoadMTDContents(const char* filename, FileContents* file);
+int ParseSha1(const char* str, uint8_t* digest);
+ssize_t FileSink(unsigned char* data, ssize_t len, void* token);
+
+static int mtd_partitions_scanned = 0;
+
+// Read a file into memory; store it and its associated metadata in
+// *file.  Return 0 on success.
+int LoadFileContents(const char* filename, FileContents* file) {
+  file->data = NULL;
+
+  // A special 'filename' beginning with "MTD:" means to load the
+  // contents of an MTD partition.
+  if (strncmp(filename, "MTD:", 4) == 0) {
+    return LoadMTDContents(filename, file);
+  }
+
+  if (stat(filename, &file->st) != 0) {
+    printf("failed to stat \"%s\": %s\n", filename, strerror(errno));
+    return -1;
+  }
+
+  file->size = file->st.st_size;
+  file->data = malloc(file->size);
+
+  FILE* f = fopen(filename, "rb");
+  if (f == NULL) {
+    printf("failed to open \"%s\": %s\n", filename, strerror(errno));
+    free(file->data);
+    file->data = NULL;
+    return -1;
+  }
+
+  size_t bytes_read = fread(file->data, 1, file->size, f);
+  if (bytes_read != file->size) {
+    printf("short read of \"%s\" (%d bytes of %d)\n",
+            filename, bytes_read, file->size);
+    free(file->data);
+    file->data = NULL;
+    return -1;
+  }
+  fclose(f);
+
+  SHA(file->data, file->size, file->sha1);
+  return 0;
+}
+
+static size_t* size_array;
+// comparison function for qsort()ing an int array of indexes into
+// size_array[].
+static int compare_size_indices(const void* a, const void* b) {
+  int aa = *(int*)a;
+  int bb = *(int*)b;
+  if (size_array[aa] < size_array[bb]) {
+    return -1;
+  } else if (size_array[aa] > size_array[bb]) {
+    return 1;
+  } else {
+    return 0;
+  }
+}
+
+void FreeFileContents(FileContents* file) {
+    if (file) free(file->data);
+    free(file);
+}
+
+// Load the contents of an MTD partition into the provided
+// FileContents.  filename should be a string of the form
+// "MTD:<partition_name>:<size_1>:<sha1_1>:<size_2>:<sha1_2>:...".
+// The smallest size_n bytes for which that prefix of the mtd contents
+// has the corresponding sha1 hash will be loaded.  It is acceptable
+// for a size value to be repeated with different sha1s.  Will return
+// 0 on success.
+//
+// This complexity is needed because if an OTA installation is
+// interrupted, the partition might contain either the source or the
+// target data, which might be of different lengths.  We need to know
+// the length in order to read from MTD (there is no "end-of-file"
+// marker), so the caller must specify the possible lengths and the
+// hash of the data, and we'll do the load expecting to find one of
+// those hashes.
+int LoadMTDContents(const char* filename, FileContents* file) {
+  char* copy = strdup(filename);
+  const char* magic = strtok(copy, ":");
+  if (strcmp(magic, "MTD") != 0) {
+    printf("LoadMTDContents called with bad filename (%s)\n",
+            filename);
+    return -1;
+  }
+  const char* partition = strtok(NULL, ":");
+
+  int i;
+  int colons = 0;
+  for (i = 0; filename[i] != '\0'; ++i) {
+    if (filename[i] == ':') {
+      ++colons;
+    }
+  }
+  if (colons < 3 || colons%2 == 0) {
+    printf("LoadMTDContents called with bad filename (%s)\n",
+            filename);
+  }
+
+  int pairs = (colons-1)/2;     // # of (size,sha1) pairs in filename
+  int* index = malloc(pairs * sizeof(int));
+  size_t* size = malloc(pairs * sizeof(size_t));
+  char** sha1sum = malloc(pairs * sizeof(char*));
+
+  for (i = 0; i < pairs; ++i) {
+    const char* size_str = strtok(NULL, ":");
+    size[i] = strtol(size_str, NULL, 10);
+    if (size[i] == 0) {
+      printf("LoadMTDContents called with bad size (%s)\n", filename);
+      return -1;
+    }
+    sha1sum[i] = strtok(NULL, ":");
+    index[i] = i;
+  }
+
+  // sort the index[] array so it indexes the pairs in order of
+  // increasing size.
+  size_array = size;
+  qsort(index, pairs, sizeof(int), compare_size_indices);
+
+  if (!mtd_partitions_scanned) {
+    mtd_scan_partitions();
+    mtd_partitions_scanned = 1;
+  }
+
+  const MtdPartition* mtd = mtd_find_partition_by_name(partition);
+  if (mtd == NULL) {
+    printf("mtd partition \"%s\" not found (loading %s)\n",
+            partition, filename);
+    return -1;
+  }
+
+  MtdReadContext* ctx = mtd_read_partition(mtd);
+  if (ctx == NULL) {
+    printf("failed to initialize read of mtd partition \"%s\"\n",
+            partition);
+    return -1;
+  }
+
+  SHA_CTX sha_ctx;
+  SHA_init(&sha_ctx);
+  uint8_t parsed_sha[SHA_DIGEST_SIZE];
+
+  // allocate enough memory to hold the largest size.
+  file->data = malloc(size[index[pairs-1]]);
+  char* p = (char*)file->data;
+  file->size = 0;                // # bytes read so far
+
+  for (i = 0; i < pairs; ++i) {
+    // Read enough additional bytes to get us up to the next size
+    // (again, we're trying the possibilities in order of increasing
+    // size).
+    size_t next = size[index[i]] - file->size;
+    size_t read = 0;
+    if (next > 0) {
+      read = mtd_read_data(ctx, p, next);
+      if (next != read) {
+        printf("short read (%d bytes of %d) for partition \"%s\"\n",
+                read, next, partition);
+        free(file->data);
+        file->data = NULL;
+        return -1;
+      }
+      SHA_update(&sha_ctx, p, read);
+      file->size += read;
+    }
+
+    // Duplicate the SHA context and finalize the duplicate so we can
+    // check it against this pair's expected hash.
+    SHA_CTX temp_ctx;
+    memcpy(&temp_ctx, &sha_ctx, sizeof(SHA_CTX));
+    const uint8_t* sha_so_far = SHA_final(&temp_ctx);
+
+    if (ParseSha1(sha1sum[index[i]], parsed_sha) != 0) {
+      printf("failed to parse sha1 %s in %s\n",
+              sha1sum[index[i]], filename);
+      free(file->data);
+      file->data = NULL;
+      return -1;
+    }
+
+    if (memcmp(sha_so_far, parsed_sha, SHA_DIGEST_SIZE) == 0) {
+      // we have a match.  stop reading the partition; we'll return
+      // the data we've read so far.
+      printf("mtd read matched size %d sha %s\n",
+             size[index[i]], sha1sum[index[i]]);
+      break;
+    }
+
+    p += read;
+  }
+
+  mtd_read_close(ctx);
+
+  if (i == pairs) {
+    // Ran off the end of the list of (size,sha1) pairs without
+    // finding a match.
+    printf("contents of MTD partition \"%s\" didn't match %s\n",
+            partition, filename);
+    free(file->data);
+    file->data = NULL;
+    return -1;
+  }
+
+  const uint8_t* sha_final = SHA_final(&sha_ctx);
+  for (i = 0; i < SHA_DIGEST_SIZE; ++i) {
+    file->sha1[i] = sha_final[i];
+  }
+
+  // Fake some stat() info.
+  file->st.st_mode = 0644;
+  file->st.st_uid = 0;
+  file->st.st_gid = 0;
+
+  free(copy);
+  free(index);
+  free(size);
+  free(sha1sum);
+
+  return 0;
+}
+
+
+// Save the contents of the given FileContents object under the given
+// filename.  Return 0 on success.
+int SaveFileContents(const char* filename, FileContents file) {
+  int fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC);
+  if (fd < 0) {
+    printf("failed to open \"%s\" for write: %s\n",
+            filename, strerror(errno));
+    return -1;
+  }
+
+  size_t bytes_written = FileSink(file.data, file.size, &fd);
+  if (bytes_written != file.size) {
+    printf("short write of \"%s\" (%d bytes of %d) (%s)\n",
+           filename, bytes_written, file.size, strerror(errno));
+    close(fd);
+    return -1;
+  }
+  fsync(fd);
+  close(fd);
+
+  if (chmod(filename, file.st.st_mode) != 0) {
+    printf("chmod of \"%s\" failed: %s\n", filename, strerror(errno));
+    return -1;
+  }
+  if (chown(filename, file.st.st_uid, file.st.st_gid) != 0) {
+    printf("chown of \"%s\" failed: %s\n", filename, strerror(errno));
+    return -1;
+  }
+
+  return 0;
+}
+
+// Write a memory buffer to target_mtd partition, a string of the form
+// "MTD:<partition>[:...]".  Return 0 on success.
+int WriteToMTDPartition(unsigned char* data, size_t len,
+                        const char* target_mtd) {
+  char* partition = strchr(target_mtd, ':');
+  if (partition == NULL) {
+    printf("bad MTD target name \"%s\"\n", target_mtd);
+    return -1;
+  }
+  ++partition;
+  // Trim off anything after a colon, eg "MTD:boot:blah:blah:blah...".
+  // We want just the partition name "boot".
+  partition = strdup(partition);
+  char* end = strchr(partition, ':');
+  if (end != NULL)
+    *end = '\0';
+
+  if (!mtd_partitions_scanned) {
+    mtd_scan_partitions();
+    mtd_partitions_scanned = 1;
+  }
+
+  const MtdPartition* mtd = mtd_find_partition_by_name(partition);
+  if (mtd == NULL) {
+    printf("mtd partition \"%s\" not found for writing\n", partition);
+    return -1;
+  }
+
+  MtdWriteContext* ctx = mtd_write_partition(mtd);
+  if (ctx == NULL) {
+    printf("failed to init mtd partition \"%s\" for writing\n",
+            partition);
+    return -1;
+  }
+
+  size_t written = mtd_write_data(ctx, (char*)data, len);
+  if (written != len) {
+    printf("only wrote %d of %d bytes to MTD %s\n",
+            written, len, partition);
+    mtd_write_close(ctx);
+    return -1;
+  }
+
+  if (mtd_erase_blocks(ctx, -1) < 0) {
+    printf("error finishing mtd write of %s\n", partition);
+    mtd_write_close(ctx);
+    return -1;
+  }
+
+  if (mtd_write_close(ctx)) {
+    printf("error closing mtd write of %s\n", partition);
+    return -1;
+  }
+
+  free(partition);
+  return 0;
+}
+
+
+// Take a string 'str' of 40 hex digits and parse it into the 20
+// byte array 'digest'.  'str' may contain only the digest or be of
+// the form "<digest>:<anything>".  Return 0 on success, -1 on any
+// error.
+int ParseSha1(const char* str, uint8_t* digest) {
+  int i;
+  const char* ps = str;
+  uint8_t* pd = digest;
+  for (i = 0; i < SHA_DIGEST_SIZE * 2; ++i, ++ps) {
+    int digit;
+    if (*ps >= '0' && *ps <= '9') {
+      digit = *ps - '0';
+    } else if (*ps >= 'a' && *ps <= 'f') {
+      digit = *ps - 'a' + 10;
+    } else if (*ps >= 'A' && *ps <= 'F') {
+      digit = *ps - 'A' + 10;
+    } else {
+      return -1;
+    }
+    if (i % 2 == 0) {
+      *pd = digit << 4;
+    } else {
+      *pd |= digit;
+      ++pd;
+    }
+  }
+  if (*ps != '\0' && *ps != ':') return -1;
+  return 0;
+}
+
+// Parse arguments (which should be of the form "<sha1>" or
+// "<sha1>:<filename>" into the array *patches, returning the number
+// of Patch objects in *num_patches.  Return 0 on success.
+int ParseShaArgs(int argc, char** argv, Patch** patches, int* num_patches) {
+  *num_patches = argc;
+  *patches = malloc(*num_patches * sizeof(Patch));
+
+  int i;
+  for (i = 0; i < *num_patches; ++i) {
+    if (ParseSha1(argv[i], (*patches)[i].sha1) != 0) {
+      printf("failed to parse sha1 \"%s\"\n", argv[i]);
+      return -1;
+    }
+    if (argv[i][SHA_DIGEST_SIZE*2] == '\0') {
+      (*patches)[i].patch_filename = NULL;
+    } else if (argv[i][SHA_DIGEST_SIZE*2] == ':') {
+      (*patches)[i].patch_filename = argv[i] + (SHA_DIGEST_SIZE*2+1);
+    } else {
+      printf("failed to parse filename \"%s\"\n", argv[i]);
+      return -1;
+    }
+  }
+
+  return 0;
+}
+
+// Search an array of Patch objects for one matching the given sha1.
+// Return the Patch object on success, or NULL if no match is found.
+const Patch* FindMatchingPatch(uint8_t* sha1, Patch* patches, int num_patches) {
+  int i;
+  for (i = 0; i < num_patches; ++i) {
+    if (memcmp(patches[i].sha1, sha1, SHA_DIGEST_SIZE) == 0) {
+      return patches+i;
+    }
+  }
+  return NULL;
+}
+
+// Returns 0 if the contents of the file (argv[2]) or the cached file
+// match any of the sha1's on the command line (argv[3:]).  Returns
+// nonzero otherwise.
+int CheckMode(int argc, char** argv) {
+  if (argc < 3) {
+    printf("no filename given\n");
+    return 2;
+  }
+
+  int num_patches;
+  Patch* patches;
+  if (ParseShaArgs(argc-3, argv+3, &patches, &num_patches) != 0) { return 1; }
+
+  FileContents file;
+  file.data = NULL;
+
+  // It's okay to specify no sha1s; the check will pass if the
+  // LoadFileContents is successful.  (Useful for reading MTD
+  // partitions, where the filename encodes the sha1s; no need to
+  // check them twice.)
+  if (LoadFileContents(argv[2], &file) != 0 ||
+      (num_patches > 0 &&
+       FindMatchingPatch(file.sha1, patches, num_patches) == NULL)) {
+    printf("file \"%s\" doesn't have any of expected "
+            "sha1 sums; checking cache\n", argv[2]);
+
+    free(file.data);
+
+    // If the source file is missing or corrupted, it might be because
+    // we were killed in the middle of patching it.  A copy of it
+    // should have been made in CACHE_TEMP_SOURCE.  If that file
+    // exists and matches the sha1 we're looking for, the check still
+    // passes.
+
+    if (LoadFileContents(CACHE_TEMP_SOURCE, &file) != 0) {
+      printf("failed to load cache file\n");
+      return 1;
+    }
+
+    if (FindMatchingPatch(file.sha1, patches, num_patches) == NULL) {
+      printf("cache bits don't match any sha1 for \"%s\"\n",
+              argv[2]);
+      return 1;
+    }
+  }
+
+  free(file.data);
+  return 0;
+}
+
+int ShowLicenses() {
+  ShowBSDiffLicense();
+  return 0;
+}
+
+ssize_t FileSink(unsigned char* data, ssize_t len, void* token) {
+  int fd = *(int *)token;
+  ssize_t done = 0;
+  ssize_t wrote;
+  while (done < (ssize_t) len) {
+    wrote = write(fd, data+done, len-done);
+    if (wrote <= 0) {
+      printf("error writing %d bytes: %s\n", (int)(len-done), strerror(errno));
+      return done;
+    }
+    done += wrote;
+  }
+  printf("wrote %d bytes to output\n", (int)done);
+  return done;
+}
+
+typedef struct {
+  unsigned char* buffer;
+  ssize_t size;
+  ssize_t pos;
+} MemorySinkInfo;
+
+ssize_t MemorySink(unsigned char* data, ssize_t len, void* token) {
+  MemorySinkInfo* msi = (MemorySinkInfo*)token;
+  if (msi->size - msi->pos < len) {
+    return -1;
+  }
+  memcpy(msi->buffer + msi->pos, data, len);
+  msi->pos += len;
+  return len;
+}
+
+// Return the amount of free space (in bytes) on the filesystem
+// containing filename.  filename must exist.  Return -1 on error.
+size_t FreeSpaceForFile(const char* filename) {
+  struct statfs sf;
+  if (statfs(filename, &sf) != 0) {
+    printf("failed to statfs %s: %s\n", filename, strerror(errno));
+    return -1;
+  }
+  return sf.f_bsize * sf.f_bfree;
+}
+
+// This program applies binary patches to files in a way that is safe
+// (the original file is not touched until we have the desired
+// replacement for it) and idempotent (it's okay to run this program
+// multiple times).
+//
+// - if the sha1 hash of <tgt-file> is <tgt-sha1>, does nothing and exits
+//   successfully.
+//
+// - otherwise, if the sha1 hash of <src-file> is <src-sha1>, applies the
+//   bsdiff <patch> to <src-file> to produce a new file (the type of patch
+//   is automatically detected from the file header).  If that new
+//   file has sha1 hash <tgt-sha1>, moves it to replace <tgt-file>, and
+//   exits successfully.  Note that if <src-file> and <tgt-file> are
+//   not the same, <src-file> is NOT deleted on success.  <tgt-file>
+//   may be the string "-" to mean "the same as src-file".
+//
+// - otherwise, or if any error is encountered, exits with non-zero
+//   status.
+//
+// <src-file> (or <file> in check mode) may refer to an MTD partition
+// to read the source data.  See the comments for the
+// LoadMTDContents() function above for the format of such a filename.
+//
+//
+// As you might guess from the arguments, this function used to be
+// main(); it was split out this way so applypatch could be built as a
+// static library and linked into other executables as well.  In the
+// future only the library form will exist; we will not need to build
+// this as a standalone executable.
+//
+// The arguments to this function are just the command-line of the
+// standalone executable:
+//
+// <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...]
+//    to apply a patch.  Returns 0 on success, 1 on failure.
+//
+// "-c" <file> [<sha1> ...]
+//    to check a file's contents against zero or more sha1s.  Returns
+//    0 if it matches any of them, 1 if it doesn't.
+//
+// "-s" <bytes>
+//    returns 0 if enough free space is available on /cache; 1 if it
+//    does not.
+//
+// "-l"
+//    shows open-source license information and returns 0.
+//
+// This function returns 2 if the arguments are not understood (in the
+// standalone executable, this causes the usage message to be
+// printed).
+//
+// TODO: make the interface more sensible for use as a library.
+
+int applypatch(int argc, char** argv) {
+  if (argc < 2) {
+    return 2;
+  }
+
+  if (strncmp(argv[1], "-l", 3) == 0) {
+    return ShowLicenses();
+  }
+
+  if (strncmp(argv[1], "-c", 3) == 0) {
+    return CheckMode(argc, argv);
+  }
+
+  if (strncmp(argv[1], "-s", 3) == 0) {
+    if (argc != 3) {
+      return 2;
+    }
+    size_t bytes = strtol(argv[2], NULL, 10);
+    if (MakeFreeSpaceOnCache(bytes) < 0) {
+      printf("unable to make %ld bytes available on /cache\n", (long)bytes);
+      return 1;
+    } else {
+      return 0;
+    }
+  }
+
+  uint8_t target_sha1[SHA_DIGEST_SIZE];
+
+  const char* source_filename = argv[1];
+  const char* target_filename = argv[2];
+  if (target_filename[0] == '-' &&
+      target_filename[1] == '\0') {
+    target_filename = source_filename;
+  }
+
+  printf("\napplying patch to %s\n", source_filename);
+
+  if (ParseSha1(argv[3], target_sha1) != 0) {
+    printf("failed to parse tgt-sha1 \"%s\"\n", argv[3]);
+    return 1;
+  }
+
+  unsigned long target_size = strtoul(argv[4], NULL, 0);
+
+  int num_patches;
+  Patch* patches;
+  if (ParseShaArgs(argc-5, argv+5, &patches, &num_patches) < 0) { return 1; }
+
+  FileContents copy_file;
+  FileContents source_file;
+  const char* source_patch_filename = NULL;
+  const char* copy_patch_filename = NULL;
+  int made_copy = 0;
+
+  // We try to load the target file into the source_file object.
+  if (LoadFileContents(target_filename, &source_file) == 0) {
+    if (memcmp(source_file.sha1, target_sha1, SHA_DIGEST_SIZE) == 0) {
+      // The early-exit case:  the patch was already applied, this file
+      // has the desired hash, nothing for us to do.
+      printf("\"%s\" is already target; no patch needed\n",
+              target_filename);
+      return 0;
+    }
+  }
+
+  if (source_file.data == NULL ||
+      (target_filename != source_filename &&
+       strcmp(target_filename, source_filename) != 0)) {
+    // Need to load the source file:  either we failed to load the
+    // target file, or we did but it's different from the source file.
+    free(source_file.data);
+    LoadFileContents(source_filename, &source_file);
+  }
+
+  if (source_file.data != NULL) {
+    const Patch* to_use =
+        FindMatchingPatch(source_file.sha1, patches, num_patches);
+    if (to_use != NULL) {
+      source_patch_filename = to_use->patch_filename;
+    }
+  }
+
+  if (source_patch_filename == NULL) {
+    free(source_file.data);
+    printf("source file is bad; trying copy\n");
+
+    if (LoadFileContents(CACHE_TEMP_SOURCE, &copy_file) < 0) {
+      // fail.
+      printf("failed to read copy file\n");
+      return 1;
+    }
+
+    const Patch* to_use =
+        FindMatchingPatch(copy_file.sha1, patches, num_patches);
+    if (to_use != NULL) {
+      copy_patch_filename = to_use->patch_filename;
+    }
+
+    if (copy_patch_filename == NULL) {
+      // fail.
+      printf("copy file doesn't match source SHA-1s either\n");
+      return 1;
+    }
+  }
+
+  int retry = 1;
+  SHA_CTX ctx;
+  int output;
+  MemorySinkInfo msi;
+  FileContents* source_to_use;
+  char* outname;
+
+  // assume that target_filename (eg "/system/app/Foo.apk") is located
+  // on the same filesystem as its top-level directory ("/system").
+  // We need something that exists for calling statfs().
+  char target_fs[strlen(target_filename)+1];
+  char* slash = strchr(target_filename+1, '/');
+  if (slash != NULL) {
+    int count = slash - target_filename;
+    strncpy(target_fs, target_filename, count);
+    target_fs[count] = '\0';
+  } else {
+    strcpy(target_fs, target_filename);
+  }
+
+  do {
+    // Is there enough room in the target filesystem to hold the patched
+    // file?
+
+    if (strncmp(target_filename, "MTD:", 4) == 0) {
+      // If the target is an MTD partition, we're actually going to
+      // write the output to /tmp and then copy it to the partition.
+      // statfs() always returns 0 blocks free for /tmp, so instead
+      // we'll just assume that /tmp has enough space to hold the file.
+
+      // We still write the original source to cache, in case the MTD
+      // write is interrupted.
+      if (MakeFreeSpaceOnCache(source_file.size) < 0) {
+        printf("not enough free space on /cache\n");
+        return 1;
+      }
+      if (SaveFileContents(CACHE_TEMP_SOURCE, source_file) < 0) {
+        printf("failed to back up source file\n");
+        return 1;
+      }
+      made_copy = 1;
+      retry = 0;
+    } else {
+      int enough_space = 0;
+      if (retry > 0) {
+        size_t free_space = FreeSpaceForFile(target_fs);
+        int enough_space =
+          (free_space > (target_size * 3 / 2));  // 50% margin of error
+        printf("target %ld bytes; free space %ld bytes; retry %d; enough %d\n",
+               (long)target_size, (long)free_space, retry, enough_space);
+      }
+
+      if (!enough_space) {
+        retry = 0;
+      }
+
+      if (!enough_space && source_patch_filename != NULL) {
+        // Using the original source, but not enough free space.  First
+        // copy the source file to cache, then delete it from the original
+        // location.
+
+        if (strncmp(source_filename, "MTD:", 4) == 0) {
+          // It's impossible to free space on the target filesystem by
+          // deleting the source if the source is an MTD partition.  If
+          // we're ever in a state where we need to do this, fail.
+          printf("not enough free space for target but source is MTD\n");
+          return 1;
+        }
+
+        if (MakeFreeSpaceOnCache(source_file.size) < 0) {
+          printf("not enough free space on /cache\n");
+          return 1;
+        }
+
+        if (SaveFileContents(CACHE_TEMP_SOURCE, source_file) < 0) {
+          printf("failed to back up source file\n");
+          return 1;
+        }
+        made_copy = 1;
+        unlink(source_filename);
+
+        size_t free_space = FreeSpaceForFile(target_fs);
+        printf("(now %ld bytes free for target)\n", (long)free_space);
+      }
+    }
+
+    const char* patch_filename;
+    if (source_patch_filename != NULL) {
+      source_to_use = &source_file;
+      patch_filename = source_patch_filename;
+    } else {
+      source_to_use = &copy_file;
+      patch_filename = copy_patch_filename;
+    }
+
+    SinkFn sink = NULL;
+    void* token = NULL;
+    output = -1;
+    outname = NULL;
+    if (strncmp(target_filename, "MTD:", 4) == 0) {
+      // We store the decoded output in memory.
+      msi.buffer = malloc(target_size);
+      if (msi.buffer == NULL) {
+        printf("failed to alloc %ld bytes for output\n",
+               (long)target_size);
+        return 1;
+      }
+      msi.pos = 0;
+      msi.size = target_size;
+      sink = MemorySink;
+      token = &msi;
+    } else {
+      // We write the decoded output to "<tgt-file>.patch".
+      outname = (char*)malloc(strlen(target_filename) + 10);
+      strcpy(outname, target_filename);
+      strcat(outname, ".patch");
+
+      output = open(outname, O_WRONLY | O_CREAT | O_TRUNC);
+      if (output < 0) {
+        printf("failed to open output file %s: %s\n",
+               outname, strerror(errno));
+        return 1;
+      }
+      sink = FileSink;
+      token = &output;
+    }
+
+#define MAX_HEADER_LENGTH 8
+    unsigned char header[MAX_HEADER_LENGTH];
+    FILE* patchf = fopen(patch_filename, "rb");
+    if (patchf == NULL) {
+      printf("failed to open patch file %s: %s\n",
+             patch_filename, strerror(errno));
+      return 1;
+    }
+    int header_bytes_read = fread(header, 1, MAX_HEADER_LENGTH, patchf);
+    fclose(patchf);
+
+    SHA_init(&ctx);
+
+    int result;
+
+    if (header_bytes_read >= 4 &&
+        header[0] == 0xd6 && header[1] == 0xc3 &&
+        header[2] == 0xc4 && header[3] == 0) {
+      // xdelta3 patches begin "VCD" (with the high bits set) followed
+      // by a zero byte (the version number).
+      printf("error:  xdelta3 patches no longer supported\n");
+      return 1;
+    } else if (header_bytes_read >= 8 &&
+               memcmp(header, "BSDIFF40", 8) == 0) {
+      result = ApplyBSDiffPatch(source_to_use->data, source_to_use->size,
+                                    patch_filename, 0, sink, token, &ctx);
+    } else if (header_bytes_read >= 8 &&
+               memcmp(header, "IMGDIFF", 7) == 0 &&
+               (header[7] == '1' || header[7] == '2')) {
+      result = ApplyImagePatch(source_to_use->data, source_to_use->size,
+                                   patch_filename, sink, token, &ctx);
+    } else {
+      printf("Unknown patch file format\n");
+      return 1;
+    }
+
+    if (output >= 0) {
+      fsync(output);
+      close(output);
+    }
+
+    if (result != 0) {
+      if (retry == 0) {
+        printf("applying patch failed\n");
+        return result != 0;
+      } else {
+        printf("applying patch failed; retrying\n");
+      }
+      if (outname != NULL) {
+        unlink(outname);
+      }
+    } else {
+      // succeeded; no need to retry
+      break;
+    }
+  } while (retry-- > 0);
+
+  const uint8_t* current_target_sha1 = SHA_final(&ctx);
+  if (memcmp(current_target_sha1, target_sha1, SHA_DIGEST_SIZE) != 0) {
+    printf("patch did not produce expected sha1\n");
+    return 1;
+  }
+
+  if (output < 0) {
+    // Copy the temp file to the MTD partition.
+    if (WriteToMTDPartition(msi.buffer, msi.pos, target_filename) != 0) {
+      printf("write of patched data to %s failed\n", target_filename);
+      return 1;
+    }
+    free(msi.buffer);
+  } else {
+    // Give the .patch file the same owner, group, and mode of the
+    // original source file.
+    if (chmod(outname, source_to_use->st.st_mode) != 0) {
+      printf("chmod of \"%s\" failed: %s\n", outname, strerror(errno));
+      return 1;
+    }
+    if (chown(outname, source_to_use->st.st_uid,
+              source_to_use->st.st_gid) != 0) {
+      printf("chown of \"%s\" failed: %s\n", outname, strerror(errno));
+      return 1;
+    }
+
+    // Finally, rename the .patch file to replace the target file.
+    if (rename(outname, target_filename) != 0) {
+      printf("rename of .patch to \"%s\" failed: %s\n",
+              target_filename, strerror(errno));
+      return 1;
+    }
+  }
+
+  // If this run of applypatch created the copy, and we're here, we
+  // can delete it.
+  if (made_copy) unlink(CACHE_TEMP_SOURCE);
+
+  // Success!
+  return 0;
+}