diff options
Diffstat (limited to '')
| -rw-r--r-- | recovery.c | 471 |
1 files changed, 0 insertions, 471 deletions
diff --git a/recovery.c b/recovery.c deleted file mode 100644 index 221ee2975..000000000 --- a/recovery.c +++ /dev/null @@ -1,471 +0,0 @@ -/* - * Copyright (C) 2007 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include <ctype.h> -#include <errno.h> -#include <fcntl.h> -#include <getopt.h> -#include <limits.h> -#include <linux/input.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <sys/reboot.h> -#include <sys/types.h> -#include <time.h> -#include <unistd.h> - -#include "bootloader.h" -#include "commands.h" -#include "common.h" -#include "cutils/properties.h" -#include "firmware.h" -#include "install.h" -#include "minui/minui.h" -#include "minzip/DirUtil.h" -#include "roots.h" - -static const struct option OPTIONS[] = { - { "send_intent", required_argument, NULL, 's' }, - { "update_package", required_argument, NULL, 'u' }, - { "wipe_data", no_argument, NULL, 'w' }, - { "wipe_cache", no_argument, NULL, 'c' }, -}; - -static const char *COMMAND_FILE = "CACHE:recovery/command"; -static const char *INTENT_FILE = "CACHE:recovery/intent"; -static const char *LOG_FILE = "CACHE:recovery/log"; -static const char *SDCARD_PACKAGE_FILE = "SDCARD:update.zip"; -static const char *TEMPORARY_LOG_FILE = "/tmp/recovery.log"; - -/* - * The recovery tool communicates with the main system through /cache files. - * /cache/recovery/command - INPUT - command line for tool, one arg per line - * /cache/recovery/log - OUTPUT - combined log file from recovery run(s) - * /cache/recovery/intent - OUTPUT - intent that was passed in - * - * The arguments which may be supplied in the recovery.command file: - * --send_intent=anystring - write the text out to recovery.intent - * --update_package=root:path - verify install an OTA package file - * --wipe_data - erase user data (and cache), then reboot - * --wipe_cache - wipe cache (but not user data), then reboot - * - * After completing, we remove /cache/recovery/command and reboot. - * Arguments may also be supplied in the bootloader control block (BCB). - * These important scenarios must be safely restartable at any point: - * - * FACTORY RESET - * 1. user selects "factory reset" - * 2. main system writes "--wipe_data" to /cache/recovery/command - * 3. main system reboots into recovery - * 4. get_args() writes BCB with "boot-recovery" and "--wipe_data" - * -- after this, rebooting will restart the erase -- - * 5. erase_root() reformats /data - * 6. erase_root() reformats /cache - * 7. finish_recovery() erases BCB - * -- after this, rebooting will restart the main system -- - * 8. main() calls reboot() to boot main system - * - * OTA INSTALL - * 1. main system downloads OTA package to /cache/some-filename.zip - * 2. main system writes "--update_package=CACHE:some-filename.zip" - * 3. main system reboots into recovery - * 4. get_args() writes BCB with "boot-recovery" and "--update_package=..." - * -- after this, rebooting will attempt to reinstall the update -- - * 5. install_package() attempts to install the update - * NOTE: the package install must itself be restartable from any point - * 6. finish_recovery() erases BCB - * -- after this, rebooting will (try to) restart the main system -- - * 7. ** if install failed ** - * 7a. prompt_and_wait() shows an error icon and waits for the user - * 7b; the user reboots (pulling the battery, etc) into the main system - * 8. main() calls maybe_install_firmware_update() - * ** if the update contained radio/hboot firmware **: - * 8a. m_i_f_u() writes BCB with "boot-recovery" and "--wipe_cache" - * -- after this, rebooting will reformat cache & restart main system -- - * 8b. m_i_f_u() writes firmware image into raw cache partition - * 8c. m_i_f_u() writes BCB with "update-radio/hboot" and "--wipe_cache" - * -- after this, rebooting will attempt to reinstall firmware -- - * 8d. bootloader tries to flash firmware - * 8e. bootloader writes BCB with "boot-recovery" (keeping "--wipe_cache") - * -- after this, rebooting will reformat cache & restart main system -- - * 8f. erase_root() reformats /cache - * 8g. finish_recovery() erases BCB - * -- after this, rebooting will (try to) restart the main system -- - * 9. main() calls reboot() to boot main system - */ - -static const int MAX_ARG_LENGTH = 4096; -static const int MAX_ARGS = 100; - -// open a file given in root:path format, mounting partitions as necessary -static FILE* -fopen_root_path(const char *root_path, const char *mode) { - if (ensure_root_path_mounted(root_path) != 0) { - LOGE("Can't mount %s\n", root_path); - return NULL; - } - - char path[PATH_MAX] = ""; - if (translate_root_path(root_path, path, sizeof(path)) == NULL) { - LOGE("Bad path %s\n", root_path); - return NULL; - } - - // When writing, try to create the containing directory, if necessary. - // Use generous permissions, the system (init.rc) will reset them. - if (strchr("wa", mode[0])) dirCreateHierarchy(path, 0777, NULL, 1); - - FILE *fp = fopen(path, mode); - if (fp == NULL) LOGE("Can't open %s\n", path); - return fp; -} - -// close a file, log an error if the error indicator is set -static void -check_and_fclose(FILE *fp, const char *name) { - fflush(fp); - if (ferror(fp)) LOGE("Error in %s\n(%s)\n", name, strerror(errno)); - fclose(fp); -} - -// command line args come from, in decreasing precedence: -// - the actual command line -// - the bootloader control block (one per line, after "recovery") -// - the contents of COMMAND_FILE (one per line) -static void -get_args(int *argc, char ***argv) { - struct bootloader_message boot; - memset(&boot, 0, sizeof(boot)); - get_bootloader_message(&boot); // this may fail, leaving a zeroed structure - - if (boot.command[0] != 0 && boot.command[0] != 255) { - LOGI("Boot command: %.*s\n", sizeof(boot.command), boot.command); - } - - if (boot.status[0] != 0 && boot.status[0] != 255) { - LOGI("Boot status: %.*s\n", sizeof(boot.status), boot.status); - } - - // --- if arguments weren't supplied, look in the bootloader control block - if (*argc <= 1) { - boot.recovery[sizeof(boot.recovery) - 1] = '\0'; // Ensure termination - const char *arg = strtok(boot.recovery, "\n"); - if (arg != NULL && !strcmp(arg, "recovery")) { - *argv = (char **) malloc(sizeof(char *) * MAX_ARGS); - (*argv)[0] = strdup(arg); - for (*argc = 1; *argc < MAX_ARGS; ++*argc) { - if ((arg = strtok(NULL, "\n")) == NULL) break; - (*argv)[*argc] = strdup(arg); - } - LOGI("Got arguments from boot message\n"); - } else if (boot.recovery[0] != 0 && boot.recovery[0] != 255) { - LOGE("Bad boot message\n\"%.20s\"\n", boot.recovery); - } - } - - // --- if that doesn't work, try the command file - if (*argc <= 1) { - FILE *fp = fopen_root_path(COMMAND_FILE, "r"); - if (fp != NULL) { - char *argv0 = (*argv)[0]; - *argv = (char **) malloc(sizeof(char *) * MAX_ARGS); - (*argv)[0] = argv0; // use the same program name - - char buf[MAX_ARG_LENGTH]; - for (*argc = 1; *argc < MAX_ARGS; ++*argc) { - if (!fgets(buf, sizeof(buf), fp)) break; - (*argv)[*argc] = strdup(strtok(buf, "\r\n")); // Strip newline. - } - - check_and_fclose(fp, COMMAND_FILE); - LOGI("Got arguments from %s\n", COMMAND_FILE); - } - } - - // --> write the arguments we have back into the bootloader control block - // always boot into recovery after this (until finish_recovery() is called) - strlcpy(boot.command, "boot-recovery", sizeof(boot.command)); - strlcpy(boot.recovery, "recovery\n", sizeof(boot.recovery)); - int i; - for (i = 1; i < *argc; ++i) { - strlcat(boot.recovery, (*argv)[i], sizeof(boot.recovery)); - strlcat(boot.recovery, "\n", sizeof(boot.recovery)); - } - set_bootloader_message(&boot); -} - - -// clear the recovery command and prepare to boot a (hopefully working) system, -// copy our log file to cache as well (for the system to read), and -// record any intent we were asked to communicate back to the system. -// this function is idempotent: call it as many times as you like. -static void -finish_recovery(const char *send_intent) -{ - // By this point, we're ready to return to the main system... - if (send_intent != NULL) { - FILE *fp = fopen_root_path(INTENT_FILE, "w"); - if (fp != NULL) { - fputs(send_intent, fp); - check_and_fclose(fp, INTENT_FILE); - } - } - - // Copy logs to cache so the system can find out what happened. - FILE *log = fopen_root_path(LOG_FILE, "a"); - if (log != NULL) { - FILE *tmplog = fopen(TEMPORARY_LOG_FILE, "r"); - if (tmplog == NULL) { - LOGE("Can't open %s\n", TEMPORARY_LOG_FILE); - } else { - static long tmplog_offset = 0; - fseek(tmplog, tmplog_offset, SEEK_SET); // Since last write - char buf[4096]; - while (fgets(buf, sizeof(buf), tmplog)) fputs(buf, log); - tmplog_offset = ftell(tmplog); - check_and_fclose(tmplog, TEMPORARY_LOG_FILE); - } - check_and_fclose(log, LOG_FILE); - } - - // Reset the bootloader message to revert to a normal main system boot. - struct bootloader_message boot; - memset(&boot, 0, sizeof(boot)); - set_bootloader_message(&boot); - - // Remove the command file, so recovery won't repeat indefinitely. - char path[PATH_MAX] = ""; - if (ensure_root_path_mounted(COMMAND_FILE) != 0 || - translate_root_path(COMMAND_FILE, path, sizeof(path)) == NULL || - (unlink(path) && errno != ENOENT)) { - LOGW("Can't unlink %s\n", COMMAND_FILE); - } - - sync(); // For good measure. -} - -#define TEST_AMEND 0 -#if TEST_AMEND -static void -test_amend() -{ - extern int test_symtab(void); - extern int test_cmd_fn(void); - extern int test_permissions(void); - int ret; - LOGD("Testing symtab...\n"); - ret = test_symtab(); - LOGD(" returned %d\n", ret); - LOGD("Testing cmd_fn...\n"); - ret = test_cmd_fn(); - LOGD(" returned %d\n", ret); - LOGD("Testing permissions...\n"); - ret = test_permissions(); - LOGD(" returned %d\n", ret); -} -#endif // TEST_AMEND - -static int -erase_root(const char *root) -{ - ui_set_background(BACKGROUND_ICON_INSTALLING); - ui_show_indeterminate_progress(); - ui_print("Formatting %s...\n", root); - return format_root_device(root); -} - -static void -prompt_and_wait() -{ - char* headers[] = { "Android system recovery utility", - "", - "Use trackball to highlight;", - "click to select.", - "", - NULL }; - - // these constants correspond to elements of the items[] list. -#define ITEM_REBOOT 0 -#define ITEM_APPLY_SDCARD 1 -#define ITEM_WIPE_DATA 2 - char* items[] = { "reboot system now [Home+Back]", - "apply sdcard:update.zip [Alt+S]", - "wipe data/factory reset [Alt+W]", - NULL }; - - ui_start_menu(headers, items); - int selected = 0; - int chosen_item = -1; - - finish_recovery(NULL); - ui_reset_progress(); - for (;;) { - int key = ui_wait_key(); - int alt = ui_key_pressed(KEY_LEFTALT) || ui_key_pressed(KEY_RIGHTALT); - int visible = ui_text_visible(); - - if (key == KEY_DREAM_BACK && ui_key_pressed(KEY_DREAM_HOME)) { - // Wait for the keys to be released, to avoid triggering - // special boot modes (like coming back into recovery!). - while (ui_key_pressed(KEY_DREAM_BACK) || - ui_key_pressed(KEY_DREAM_HOME)) { - usleep(1000); - } - chosen_item = ITEM_REBOOT; - } else if (alt && key == KEY_W) { - chosen_item = ITEM_WIPE_DATA; - } else if (alt && key == KEY_S) { - chosen_item = ITEM_APPLY_SDCARD; - } else if ((key == KEY_DOWN || key == KEY_VOLUMEDOWN) && visible) { - ++selected; - selected = ui_menu_select(selected); - } else if ((key == KEY_UP || key == KEY_VOLUMEUP) && visible) { - --selected; - selected = ui_menu_select(selected); - } else if (key == BTN_MOUSE && visible) { - chosen_item = selected; - } - - if (chosen_item >= 0) { - // turn off the menu, letting ui_print() to scroll output - // on the screen. - ui_end_menu(); - - switch (chosen_item) { - case ITEM_REBOOT: - return; - - case ITEM_WIPE_DATA: - ui_print("\n-- Wiping data...\n"); - erase_root("DATA:"); - erase_root("CACHE:"); - ui_print("Data wipe complete.\n"); - if (!ui_text_visible()) return; - break; - - case ITEM_APPLY_SDCARD: - ui_print("\n-- Install from sdcard...\n"); - int status = install_package(SDCARD_PACKAGE_FILE); - if (status != INSTALL_SUCCESS) { - ui_set_background(BACKGROUND_ICON_ERROR); - ui_print("Installation aborted.\n"); - } else if (!ui_text_visible()) { - return; // reboot if logs aren't visible - } else { - ui_print("Install from sdcard complete.\n"); - } - break; - } - - // if we didn't return from this function to reboot, show - // the menu again. - ui_start_menu(headers, items); - selected = 0; - chosen_item = -1; - - finish_recovery(NULL); - ui_reset_progress(); - - // throw away keys pressed while the command was running, - // so user doesn't accidentally trigger menu items. - ui_clear_key_queue(); - } - } -} - -static void -print_property(const char *key, const char *name, void *cookie) -{ - fprintf(stderr, "%s=%s\n", key, name); -} - -int -main(int argc, char **argv) -{ - time_t start = time(NULL); - - // If these fail, there's not really anywhere to complain... - freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL); - freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL); - fprintf(stderr, "Starting recovery on %s", ctime(&start)); - - ui_init(); - get_args(&argc, &argv); - - int previous_runs = 0; - const char *send_intent = NULL; - const char *update_package = NULL; - int wipe_data = 0, wipe_cache = 0; - - int arg; - while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) { - switch (arg) { - case 'p': previous_runs = atoi(optarg); break; - case 's': send_intent = optarg; break; - case 'u': update_package = optarg; break; - case 'w': wipe_data = wipe_cache = 1; break; - case 'c': wipe_cache = 1; break; - case '?': - LOGE("Invalid command argument\n"); - continue; - } - } - - fprintf(stderr, "Command:"); - for (arg = 0; arg < argc; arg++) { - fprintf(stderr, " \"%s\"", argv[arg]); - } - fprintf(stderr, "\n\n"); - - property_list(print_property, NULL); - fprintf(stderr, "\n"); - -#if TEST_AMEND - test_amend(); -#endif - - RecoveryCommandContext ctx = { NULL }; - if (register_update_commands(&ctx)) { - LOGE("Can't install update commands\n"); - } - - int status = INSTALL_SUCCESS; - - if (update_package != NULL) { - status = install_package(update_package); - if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n"); - } else if (wipe_data || wipe_cache) { - if (wipe_data && erase_root("DATA:")) status = INSTALL_ERROR; - if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR; - if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n"); - } else { - status = INSTALL_ERROR; // No command specified - } - - if (status != INSTALL_SUCCESS) ui_set_background(BACKGROUND_ICON_ERROR); - if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait(); - - // If there is a radio image pending, reboot now to install it. - maybe_install_firmware_update(send_intent); - - // Otherwise, get ready to boot the main system... - finish_recovery(send_intent); - ui_print("Rebooting...\n"); - sync(); - reboot(RB_AUTOBOOT); - return EXIT_SUCCESS; -} |