1 files changed, 0 insertions, 228 deletions

diff --git a/dxsdk/Include/DShowIDL/medparam.idl b/dxsdk/Include/DShowIDL/medparam.idl
deleted file mode 100644
index b45eab97..00000000
--- a/dxsdk/Include/DShowIDL/medparam.idl
+++ /dev/null
@@ -1,228 +0,0 @@
-//------------------------------------------------------------------------------
-// File: MedParam.idl
-//
-// Desc: Definition of the IMediaParams and associated interfaces. These
-//       interfaces are designed to allow communication of curve-following
-//       behaviors for parameters of objects which require dynamic changes
-//       to their parameters at run time. All changes are specified by
-//       timestamp and curve type to ensure the parameters can be set
-//       at sufficient accuracy with predictable behavior on subsequent
-//       playback of the same curves.
-//
-// Copyright (c) 1999 - 2002, Microsoft Corporation.  All rights reserved.
-//------------------------------------------------------------------------------
-
-
-import "oaidl.idl";
-import "ocidl.idl";
-import "strmif.idl";
-
-
-//------------------------------------------------------------------------------
-// Define the semantic type to be used for each parameter.  All values passed
-// into this interface are 32-bit floats, but the interface can specify that
-// the values must be integer, booleans, or enumerated types
-//------------------------------------------------------------------------------
-typedef float MP_DATA;          // All data is 32-bit floats
-
-typedef enum _MP_Type {
-   MPT_INT,                     // data is signed 23 bit integer (mantissa)
-   MPT_FLOAT,                   // data is 32bit IEEE float
-   MPT_BOOL,                    // data is true or false (using ANSI C++ definition)
-   MPT_ENUM,                    // data is a set (represented by consecutive integers)
-   MPT_MAX,
-} MP_TYPE;
-
-const MP_DATA MPBOOL_TRUE = 1.0;    // Value of true
-const MP_DATA MPBOOL_FALSE = 0.0;   // Value of false
-
-
-//------------------------------------------------------------------------------
-// Define the types of curves which are supported
-//------------------------------------------------------------------------------
-typedef enum _MP_CURVE_TYPE {
-    MP_CURVE_JUMP      = 0x0001, // No interpolation, just jump to next point
-    MP_CURVE_LINEAR    = 0x0002, // Linear interpolation (y follows x from 0.0 to 1.0)
-    MP_CURVE_SQUARE    = 0x0004, // y follow x^2 from 0.0 to 1.0
-    MP_CURVE_INVSQUARE = 0x0008, // y follows 1-(x^2) from 0.0 to 1.0
-    MP_CURVE_SINE      = 0x0010, // y follows sin(x) from -pi/2 to pi/2
-} MP_CURVE_TYPE;
-
-
-//------------------------------------------------------------------------------
-// Capability bits. Used by the object to specify what capabilities it has.
-//------------------------------------------------------------------------------
-typedef DWORD MP_CAPS;
-// Curve capabilities - If the cap bit is set, that type of curve is supported
-const MP_CAPS MP_CAPS_CURVE_JUMP = MP_CURVE_JUMP;
-const MP_CAPS MP_CAPS_CURVE_LINEAR = MP_CURVE_LINEAR;
-const MP_CAPS MP_CAPS_CURVE_SQUARE = MP_CURVE_SQUARE;
-const MP_CAPS MP_CAPS_CURVE_INVSQUARE = MP_CURVE_INVSQUARE;
-const MP_CAPS MP_CAPS_CURVE_SINE = MP_CURVE_SINE;
-
-
-//------------------------------------------------------------------------------
-// Structure used to return information about the type and limits of a parameter
-//------------------------------------------------------------------------------
-typedef struct _MP_PARAMINFO {
-   MP_TYPE mpType;      // One of MP_TYPE_xxx codes
-   MP_CAPS  mopCaps;    // A collection of MP_CAPS flags
-
-   // Minimum and maximum values
-   MP_DATA mpdMinValue;     // minimum legal value
-   MP_DATA mpdMaxValue;     // maximum legal value
-   MP_DATA mpdNeutralValue; // default or 'center' value
-
-   // Defualt Unit and Label text. These strings will ALWAYS be English
-   // strings in the UNICODE character set. For international text
-   // use the GetParamText member function
-   WCHAR                   szUnitText[32];  // units of the parameter
-   WCHAR                   szLabel[32];     // name of the parameter
-
-} MP_PARAMINFO;
-
-
-//------------------------------------------------------------------------------
-// Parameter Index types
-//------------------------------------------------------------------------------
-typedef DWORD DWORD;
-const DWORD DWORD_ALLPARAMS = -1;   // Apply this operation to all params
-
-
-//------------------------------------------------------------------------------
-// Defined list of timestamp types
-//------------------------------------------------------------------------------
-typedef DWORD MP_TIMEDATA;  // Extra data to further define type
-
-// REFERENCE_TIME (1 tick = 100 nanoseconds, MP_TIMEDATA ignored)
-cpp_quote("DEFINE_GUID(GUID_TIME_REFERENCE,")
-cpp_quote("0x93ad712b, 0xdaa0, 0x4ffe, 0xbc, 0x81, 0xb0, 0xce, 0x50, 0xf, 0xcd, 0xd9);")
-
-// Music Time (MP_TIMEDATA = parts/quarter note)
-cpp_quote("DEFINE_GUID(GUID_TIME_MUSIC,")
-cpp_quote("0x574c49d, 0x5b04, 0x4b15, 0xa5, 0x42, 0xae, 0x28, 0x20, 0x30, 0x11, 0x7b);")
-
-// Time is measures in samples. MP_TIMEDATA = Samples/sec)
-cpp_quote("DEFINE_GUID(GUID_TIME_SAMPLES,")
-cpp_quote("0xa8593d05, 0xc43, 0x4984, 0x9a, 0x63, 0x97, 0xaf, 0x9e, 0x2, 0xc4, 0xc0);")
-
-
-//------------------------------------------------------------------------------
-// The value of a given parameter at a specific point in time
-//------------------------------------------------------------------------------
-typedef DWORD MP_FLAGS;
-const MP_FLAGS MPF_ENVLP_STANDARD         = 0x0000; // Use all data provided
-const MP_FLAGS MPF_ENVLP_BEGIN_CURRENTVAL = 0x0001;
-        // Ignore valStart value, use current value as the staring point
-const MP_FLAGS MPF_ENVLP_BEGIN_NEUTRALVAL = 0x0002;
-        // Ignore valStart value, use neutral value as the staring point
-
-typedef struct _MP_ENVELOPE_SEGMENT {
-   REFERENCE_TIME  rtStart;     // Start time in current time format
-   REFERENCE_TIME  rtEnd;       // End time in current time format
-   MP_DATA         valStart;    // Initial Value
-   MP_DATA         valEnd;      // Final Value
-   MP_CURVE_TYPE   iCurve;      // One of MP_CURVE_TYPE codes
-   MP_FLAGS        flags;       // Special cases
-} MP_ENVELOPE_SEGMENT;
-
-//------------------------------------------------------------------------------
-// Define flags for Punch-in timing
-//------------------------------------------------------------------------------
-const MP_FLAGS MPF_PUNCHIN_REFTIME = 0; // Use the reference time as the PI time
-const MP_FLAGS MPF_PUNCHIN_NOW = 0x0001; // Punch in at the current clock time
-const MP_FLAGS MPF_PUNCHIN_STOPPED = 0x0002; // Return change notifications during
-                                             // author time
-
-//------------------------------------------------------------------------------
-// IMediaParamInfo - Interface used to determine the names, data types and
-// units of the parameters which are exposed by the object.  This interface
-// is used at discovery time, and is not required during run-time since the
-// objects parameters are a fixed set and this data can be cached by the
-// calling applicaiton.
-//------------------------------------------------------------------------------
-[
-object,
-uuid(6d6cbb60-a223-44aa-842f-a2f06750be6d),
-version(1.0)
-]
-interface IMediaParamInfo : IUnknown
-{
-    HRESULT GetParamCount (
-        [out] DWORD * pdwParams
-    );
-    HRESULT GetParamInfo (
-        [in] DWORD dwParamIndex,
-        [out] MP_PARAMINFO * pInfo
-    );
-    // returns a series of null terminated strings. strings are in the
-    // following order:
-    // Param Label, Units Text, 1st Enum Text, 2nd Enum Text, etc...
-    HRESULT GetParamText (
-        [in] DWORD dwParamIndex,    // which param to get text for
-        [out] WCHAR **ppwchText     // returns ptr to CoTaskMemAlloc'd string
-    );
-
-    // Returns the number of diffrent time formats this object understands
-    HRESULT GetNumTimeFormats (
-        [out] DWORD * pdwNumTimeFormats
-    );
-
-    // Returns the GUID for the ith supported time format
-    HRESULT GetSupportedTimeFormat(
-        [in] DWORD dwFormatIndex,
-        [out] GUID *pguidTimeFormat
-    );
-
-    // Returns the current time format
-    HRESULT GetCurrentTimeFormat (
-        [out] GUID *pguidTimeFormat,
-        [out] MP_TIMEDATA *pTimeData
-    );
-}
-
-//------------------------------------------------------------------------------
-// IMediaParams - Interfaes used to actually set the media params and the
-// envelopes to follow
-//------------------------------------------------------------------------------
-[
-object,
-uuid(6d6cbb61-a223-44aa-842f-a2f06750be6e),
-version(1.0)
-]
-interface IMediaParams : IUnknown
-{
-    // Single param Get/Set methods
-    HRESULT GetParam (
-        [in] DWORD dwParamIndex,
-        [out] MP_DATA *pValue
-    );
-    HRESULT SetParam (
-        [in] DWORD dwParamIndex,
-        [in] MP_DATA value
-    );
-
-    // Envelope methods (param change over time)
-    HRESULT AddEnvelope (
-        [in] DWORD dwParamIndex,
-        [in] DWORD cSegments,
-        [in]  MP_ENVELOPE_SEGMENT * pEnvelopeSegments
-    );
-
-    // Flush all of the envelope information for the given paramter between
-    // the timestamps specified
-    HRESULT FlushEnvelope (
-        [in] DWORD dwParamIndex,
-        [in] REFERENCE_TIME refTimeStart,
-        [in] REFERENCE_TIME refTimeEnd
-    );
-
-    // Change the time format being used by the object
-    HRESULT SetTimeFormat (
-        [in] GUID guidTimeFormat,
-        [in] MP_TIMEDATA mpTimeData
-    );
-}
-
-
-