6 files changed, 29 insertions, 28 deletions

diff --git a/examples/Alert_Window_Mode/Alert_Window_Mode.ino b/examples/Alert_Window_Mode/Alert_Window_Mode.ino
index 3be5dec..a68b684 100644
--- a/examples/Alert_Window_Mode/Alert_Window_Mode.ino
+++ b/examples/Alert_Window_Mode/Alert_Window_Mode.ino
@@ -81,14 +81,14 @@ void setup() {
    */

   //adc.setConvRate(ADS1115_8_SPS); //uncomment if you want to change the default

 

-  /* Set continous or single shot mode:

+  /* Set continuous or single shot mode:

    * 

-   *  ADS1115_CONTINOUS  ->  continous mode

-   *  ADS1115_SINGLE     ->  single shot mode (default)

+   *  ADS1115_CONTINUOUS  ->  continuous mode

+   *  ADS1115_SINGLE      ->  single shot mode (default)

    */

-  adc.setMeasureMode(ADS1115_CONTINOUS); //comment or change you want to change to single shot

+  adc.setMeasureMode(ADS1115_CONTINUOUS); //comment or change you want to change to single shot

 

-   /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will 

+   /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will 

    *  be active when measured values are beyond the maximum limit or outside the window 

    *  Upper limit first: setAlertLimit_V(MODE, maximum, minimum)

    *  In max limit mode the minimum value is the limit where the alert pin will be deactivated 

diff --git a/examples/Alert_Window_Mode_with_Latch/Alert_Window_Mode_with_Latch.ino b/examples/Alert_Window_Mode_with_Latch/Alert_Window_Mode_with_Latch.ino
index 049a65f..f90d6db 100644
--- a/examples/Alert_Window_Mode_with_Latch/Alert_Window_Mode_with_Latch.ino
+++ b/examples/Alert_Window_Mode_with_Latch/Alert_Window_Mode_with_Latch.ino
@@ -83,14 +83,14 @@ void setup() {
    */

   //adc.setConvRate(ADS1115_8_SPS); //uncomment if you want to change the default

 

-  /* Set continous or single shot mode:

+  /* Set continuous or single shot mode:

    * 

-   *  ADS1115_CONTINOUS  ->  continous mode

+   *  ADS1115_CONTINUOUS  ->  continuous mode

    *  ADS1115_SINGLE     ->  single shot mode (default)

    */

-  adc.setMeasureMode(ADS1115_CONTINOUS); //comment or change if you want to change single shot

+  adc.setMeasureMode(ADS1115_CONTINUOUS); //comment or change if you want to change single shot

 

-   /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will 

+   /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will 

    *  be active when measured values are beyond the maximum limit or outside the window 

    *  Upper limit first: setAlertLimit_V(MODE, maximum, minimum)

    *  In max limit mode the minimum value is the limit where the alert pin will be deactivated 

diff --git a/examples/Single_Shot/Single_Shot.ino b/examples/Single_Shot/Single_Shot.ino
index 8a5a198..3b583b2 100644
--- a/examples/Single_Shot/Single_Shot.ino
+++ b/examples/Single_Shot/Single_Shot.ino
@@ -32,7 +32,7 @@ void setup() {
    * ADS1115_RANGE_0512  ->  +/- 512 mV

    * ADS1115_RANGE_0256  ->  +/- 256 mV

    */

-  adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change paramater to change range

+  adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change parameter to change range

 

   /* Set the inputs to be compared

    *  

@@ -71,14 +71,14 @@ void setup() {
    */

   //adc.setConvRate(ADS1115_128_SPS); //uncomment if you want to change the default

 

-  /* Set continous or single shot mode:

+  /* Set continuous or single shot mode:

    * 

-   *  ADS1115_CONTINOUS  ->  continous mode

+   *  ADS1115_CONTINUOUS  ->  continuous mode

    *  ADS1115_SINGLE     ->  single shot mode (default)

    */

-  //adc.setMeasureMode(ADS1115_CONTINOUS); //uncomment if you want to change the default

+  //adc.setMeasureMode(ADS1115_CONTINUOUS); //uncomment if you want to change the default

 

-   /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will 

+   /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will 

    *  be active when measured values are beyond the maximum limit or outside the window 

    *  Upper limit first: setAlertLimit_V(MODE, maximum, minimum)

    *  In max limit mode the minimum value is the limit where the alert pin will be deactivated (if 

diff --git a/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino b/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino
index a02067a..5822f01 100644
--- a/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino
+++ b/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino
@@ -76,14 +76,14 @@ void setup() {
    */

   adc.setConvRate(ADS1115_8_SPS); //comment line/change parameter to change SPS

 

-  /* Set continous or single shot mode:

+  /* Set continuous or single shot mode:

    * 

-   *  ADS1115_CONTINOUS  ->  continous mode

+   *  ADS1115_CONTINUOUS  ->  continuous mode

    *  ADS1115_SINGLE     ->  single shot mode (default)

    */

-  //adc.setMeasureMode(ADS1115_CONTINOUS); // continous mode does not work with conversion ready

+  //adc.setMeasureMode(ADS1115_CONTINUOUS); // continuous mode does not work with conversion ready

 

-   /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will 

+   /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will 

    *  be active when measured values are beyond the maximum limit or outside the window 

    *  Upper limit first: setAlertLimit_V(MODE, maximum, minimum)

    *  In max limit mode the minimum value is the limit where the alert pin will be deactivated (if 

diff --git a/examples/Single_Shot_Conv_Ready_Controlled/Single_Shot_Conv_Ready_Controlled.ino b/examples/Single_Shot_Conv_Ready_Controlled/Single_Shot_Conv_Ready_Controlled.ino
index 976e682..9ca409e 100644
--- a/examples/Single_Shot_Conv_Ready_Controlled/Single_Shot_Conv_Ready_Controlled.ino
+++ b/examples/Single_Shot_Conv_Ready_Controlled/Single_Shot_Conv_Ready_Controlled.ino
@@ -2,7 +2,7 @@
 * Example sketch for the ADS1115_WE library

 *

 * This sketch shows how you can use the conversion ready bit with the isBusy function.

-* This does not work in the continous mode. 

+* This does not work in the continuous mode. 

 *  

 * Further information can be found on:

 * https://wolles-elektronikkiste.de/ads1115

@@ -72,14 +72,14 @@ void setup() {
    */

   adc.setConvRate(ADS1115_8_SPS); //comment line/change parameter to change SPS

 

-  /* Set continous or single shot mode:

+  /* Set continuous or single shot mode:

    * 

-   *  ADS1115_CONTINOUS  ->  continous mode

+   *  ADS1115_CONTINUOUS  ->  continuous mode

    *  ADS1115_SINGLE     ->  single shot mode (default)

    */

-  //adc.setMeasureMode(ADS1115_CONTINOUS); //continous mode does not work with conversion ready (isBusy)

+  //adc.setMeasureMode(ADS1115_CONTINUOUS); //continuous mode does not work with conversion ready (isBusy)

 

-   /* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will 

+   /* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will 

    *  be active when measured values are beyond the maximum limit or outside the window 

    *  Upper limit first: setAlertLimit_V(MODE, maximum, minimum)

    *  In max limit mode the minimum value is the limit where the alert pin will be deactivated (if 

diff --git a/src/ADS1115_WE.h b/src/ADS1115_WE.h
index c5a269a..c531368 100644
--- a/src/ADS1115_WE.h
+++ b/src/ADS1115_WE.h
@@ -70,8 +70,9 @@ typedef enum ADS1115_CONV_RATE{
 } convRate;
 
 typedef enum ADS1115_MEASURE_MODE{
-	ADS1115_CONTINOUS = 0x0000,
-	ADS1115_SINGLE    = 0x0100
+	ADS1115_CONTINOUS  = 0x0000, // keeping misspelled enum for backwards compatibility.
+	ADS1115_CONTINUOUS = 0x0000, 
+	ADS1115_SINGLE     = 0x0100
 } measureMode;
 
 typedef enum ADS1115_RANGE{
@@ -139,7 +140,7 @@ public:
     */
 	void setAlertPol(ADS1115_ALERT_POL polarity);
 
-	/* Choose maximum limit or maxium and minimum alert limit (window)in Volt - alert pin will
+	/* Choose maximum limit or maximum and minimum alert limit (window)in Volt - alert pin will
      * be active when measured values are beyond the maximum limit or outside the window
      * Upper limit first: setAlertLimit_V(MODE, maximum, minimum)
      * In max limit mode the minimum value is the limit where the alert pin will be deactivated (if
@@ -164,9 +165,9 @@ public:
     */
 	void setConvRate(ADS1115_CONV_RATE rate);
 
-	/* Set continous or single shot mode:
+	/* Set continuous or single shot mode:
      *
-     * ADS1115_CONTINOUS  ->  continous mode
+     * ADS1115_CONTINUOUS  ->  continuous mode
      * ADS1115_SINGLE     ->  single shot mode (default)
     */
 	void setMeasureMode(ADS1115_MEASURE_MODE mode);