From 7c34f12c600ae2b8ce608bc5456b3da1b33631f5 Mon Sep 17 00:00:00 2001 From: "Wolfgang (Wolle) Ewald" Date: Thu, 18 Feb 2021 23:25:58 +0100 Subject: Add files via upload --- examples/Continuous/Continuous.ino | 283 ++++++++++++++++++++----------------- 1 file changed, 157 insertions(+), 126 deletions(-) diff --git a/examples/Continuous/Continuous.ino b/examples/Continuous/Continuous.ino index 3f4ca68..ce41808 100644 --- a/examples/Continuous/Continuous.ino +++ b/examples/Continuous/Continuous.ino @@ -1,126 +1,157 @@ -/*************************************************************************** -* Example sketch for the ADS1115_WE library -* -* This sketch shows how to use the ADS1115 in continuous mode. -* -* Further information can be found on: -* https://wolles-elektronikkiste.de/ads1115 (German) -* https://wolles-elektronikkiste.de/en/ads1115-a-d-converter-with-amplifier (English) -* -***************************************************************************/ - -#include -#include -#define I2C_ADDRESS 0x48 - -ADS1115_WE adc(I2C_ADDRESS); -// ADS1115_WE adc = ADS1115_WE(); // Alternative: uses default address 0x48 - -void setup() { - Wire.begin(); - Serial.begin(9600); - if(!adc.init()){ - Serial.println("ADS1115 not connected!"); - } - - /* Set the voltage range of the ADC to adjust the gain - * Please note that you must not apply more than VDD + 0.3V to the input pins! - * - * ADS1115_RANGE_6144 -> +/- 6144 mV - * ADS1115_RANGE_4096 -> +/- 4096 mV - * ADS1115_RANGE_2048 -> +/- 2048 mV (default) - * ADS1115_RANGE_1024 -> +/- 1024 mV - * ADS1115_RANGE_0512 -> +/- 512 mV - * ADS1115_RANGE_0256 -> +/- 256 mV - */ - adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change parameter to change range - - /* Set the inputs to be compared - * - * ADS1115_COMP_0_1 -> compares 0 with 1 (default) - * ADS1115_COMP_0_3 -> compares 0 with 3 - * ADS1115_COMP_1_3 -> compares 1 with 3 - * ADS1115_COMP_2_3 -> compares 2 with 3 - * ADS1115_COMP_0_GND -> compares 0 with GND - * ADS1115_COMP_1_GND -> compares 1 with GND - * ADS1115_COMP_2_GND -> compares 2 with GND - * ADS1115_COMP_3_GND -> compares 3 with GND - */ - adc.setCompareChannels(ADS1115_COMP_0_GND); //comment line/change parameter to change channel - - /* Set number of conversions after which the alert pin asserts - * - or you can disable the alert - * - * ADS1115_ASSERT_AFTER_1 -> after 1 conversion - * ADS1115_ASSERT_AFTER_2 -> after 2 conversions - * ADS1115_ASSERT_AFTER_4 -> after 4 conversions - * ADS1115_DISABLE_ALERT -> disable comparator / alert pin (default) - */ - //adc.setAlertPinMode(ADS1115_ASSERT_AFTER_1); //uncomment if you want to change the default - - /* Set the conversion rate in SPS (samples per second) - * Options should be self-explaining: - * - * ADS1115_8_SPS - * ADS1115_16_SPS - * ADS1115_32_SPS - * ADS1115_64_SPS - * ADS1115_128_SPS (default) - * ADS1115_250_SPS - * ADS1115_475_SPS - * ADS1115_860_SPS - */ - // adc.setConvRate(ADS1115_8_SPS); //uncomment if you want to change the default - - /* Set continuous or single shot mode: - * - * ADS1115_CONTINUOUS -> continuous mode - * ADS1115_SINGLE -> single shot mode (default) - */ - adc.setMeasureMode(ADS1115_CONTINUOUS); //comment line/change parameter to change mode - - /* Choose maximum limit or maximum and minimum alert limit (window) in Volt - alert pin will - * assert when measured values are beyond the maximum limit or outside the window - * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) - * In max limit mode the minimum value is the limit where the alert pin assertion will be - * cleared (if not latched) - * - * ADS1115_MAX_LIMIT - * ADS1115_WINDOW - * - */ - //adc.setAlertModeAndLimit_V(ADS1115_MAX_LIMIT, 3.0, 1.5); //uncomment if you want to change the default - - /* Enable or disable latch. If latch is enabled the alert pin will assert until the - * conversion register is read (getResult functions). If disabled the alert pin assertion will be - * cleared with next value within limits. - * - * ADS1115_LATCH_DISABLED (default) - * ADS1115_LATCH_ENABLED - */ - //adc.setAlertLatch(ADS1115_LATCH_ENABLED); //uncomment if you want to change the default - - /* Sets the alert pin polarity if active: - * - * ADS1115_ACT_LOW -> active low (default) - * ADS1115_ACT_HIGH -> active high - */ - //adc.setAlertPol(ADS1115_ACT_LOW); //uncomment if you want to change the default - - /* With this function the alert pin will assert, when a conversion is ready. - * In order to deactivate, use the setAlertLimit_V function - */ - //adc.setAlertPinToConversionReady(); //uncomment if you want to change the default - - Serial.println("ADS1115 Example Sketch - Continuous Mode"); - Serial.println(); -} - -void loop() { - float voltage = 0.0; - voltage = adc.getResult_V(); // alternative: getResult_mV for Millivolt - Serial.print("Channel 0 vs GND [V]: "); - Serial.println(voltage); - Serial.println("-------------------------------"); - delay(2000); -} +/*************************************************************************** +* Example sketch for the ADS1115_WE library +* +* This sketch shows how to use the ADS1115 in continuous mode. +* +* Further information can be found on: +* https://wolles-elektronikkiste.de/ads1115 (German) +* https://wolles-elektronikkiste.de/en/ads1115-a-d-converter-with-amplifier (English) +* +***************************************************************************/ + +#include +#include +#define I2C_ADDRESS 0x48 + +ADS1115_WE adc(I2C_ADDRESS); +// ADS1115_WE adc = ADS1115_WE(); // Alternative: uses default address 0x48 + +void setup() { + Wire.begin(); + Serial.begin(9600); + if(!adc.init()){ + Serial.println("ADS1115 not connected!"); + } + + /* Set the voltage range of the ADC to adjust the gain + * Please note that you must not apply more than VDD + 0.3V to the input pins! + * + * ADS1115_RANGE_6144 -> +/- 6144 mV + * ADS1115_RANGE_4096 -> +/- 4096 mV + * ADS1115_RANGE_2048 -> +/- 2048 mV (default) + * ADS1115_RANGE_1024 -> +/- 1024 mV + * ADS1115_RANGE_0512 -> +/- 512 mV + * ADS1115_RANGE_0256 -> +/- 256 mV + */ + adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change parameter to change range + + /* Set the inputs to be compared + * + * ADS1115_COMP_0_1 -> compares 0 with 1 (default) + * ADS1115_COMP_0_3 -> compares 0 with 3 + * ADS1115_COMP_1_3 -> compares 1 with 3 + * ADS1115_COMP_2_3 -> compares 2 with 3 + * ADS1115_COMP_0_GND -> compares 0 with GND + * ADS1115_COMP_1_GND -> compares 1 with GND + * ADS1115_COMP_2_GND -> compares 2 with GND + * ADS1115_COMP_3_GND -> compares 3 with GND + */ + adc.setCompareChannels(ADS1115_COMP_0_GND); //comment line/change parameter to change channel + + /* Set number of conversions after which the alert pin asserts + * - or you can disable the alert + * + * ADS1115_ASSERT_AFTER_1 -> after 1 conversion + * ADS1115_ASSERT_AFTER_2 -> after 2 conversions + * ADS1115_ASSERT_AFTER_4 -> after 4 conversions + * ADS1115_DISABLE_ALERT -> disable comparator / alert pin (default) + */ + //adc.setAlertPinMode(ADS1115_ASSERT_AFTER_1); //uncomment if you want to change the default + + /* Set the conversion rate in SPS (samples per second) + * Options should be self-explaining: + * + * ADS1115_8_SPS + * ADS1115_16_SPS + * ADS1115_32_SPS + * ADS1115_64_SPS + * ADS1115_128_SPS (default) + * ADS1115_250_SPS + * ADS1115_475_SPS + * ADS1115_860_SPS + */ + // adc.setConvRate(ADS1115_8_SPS); //uncomment if you want to change the default + + /* Set continuous or single shot mode: + * + * ADS1115_CONTINUOUS -> continuous mode + * ADS1115_SINGLE -> single shot mode (default) + */ + adc.setMeasureMode(ADS1115_CONTINUOUS); //comment line/change parameter to change mode + + /* Choose maximum limit or maximum and minimum alert limit (window) in Volt - alert pin will + * assert when measured values are beyond the maximum limit or outside the window + * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) + * In max limit mode the minimum value is the limit where the alert pin assertion will be + * cleared (if not latched) + * + * ADS1115_MAX_LIMIT + * ADS1115_WINDOW + * + */ + //adc.setAlertModeAndLimit_V(ADS1115_MAX_LIMIT, 3.0, 1.5); //uncomment if you want to change the default + + /* Enable or disable latch. If latch is enabled the alert pin will assert until the + * conversion register is read (getResult functions). If disabled the alert pin assertion will be + * cleared with next value within limits. + * + * ADS1115_LATCH_DISABLED (default) + * ADS1115_LATCH_ENABLED + */ + //adc.setAlertLatch(ADS1115_LATCH_ENABLED); //uncomment if you want to change the default + + /* Sets the alert pin polarity if active: + * + * ADS1115_ACT_LOW -> active low (default) + * ADS1115_ACT_HIGH -> active high + */ + //adc.setAlertPol(ADS1115_ACT_LOW); //uncomment if you want to change the default + + /* With this function the alert pin will assert, when a conversion is ready. + * In order to deactivate, use the setAlertLimit_V function + */ + //adc.setAlertPinToConversionReady(); //uncomment if you want to change the default + + Serial.println("ADS1115 Example Sketch - Continuous Mode"); + Serial.println("All values in volts"); + Serial.println(); +} + + /* If you change the compare channels you can immediately read values from the conversion + * register, although they might belong to the former channel if no precautions are taken. + * It takes about the time needed for two conversions to get the correct data. In single + * shot mode you can use the isBusy() function to wait for data from the new channel. This + * does not work in continuous mode. + * To solve this issue the library adds a delay after change of channels if you are in contunuous + * mode. The length of the delay is adjusted to the conversion rate. But be aware that the output + * rate will be much lower that the conversion rate if you change channels frequently. + */ + +void loop() { + float voltage = 0.0; + + Serial.print("0: "); + voltage = readChannel(ADS1115_COMP_0_GND); + Serial.print(voltage); + + Serial.print(", 1: "); + voltage = readChannel(ADS1115_COMP_1_GND); + Serial.print(voltage); + + Serial.print(", 2: "); + voltage = readChannel(ADS1115_COMP_2_GND); + Serial.print(voltage); + + Serial.print(", 3: "); + voltage = readChannel(ADS1115_COMP_3_GND); + Serial.println(voltage); + + delay(1000); +} + +float readChannel(ADS1115_MUX channel) { + float voltage = 0.0; + adc.setCompareChannels(channel); + voltage = adc.getResult_V(); // alternative: getResult_mV for Millivolt + return voltage; +} -- cgit v1.2.3