summaryrefslogtreecommitdiffstats
path: root/heimdall-frontend/doc-pak
diff options
context:
space:
mode:
authorBenjamin Dobell <ben@ben-opensuse.ben-opensuse>2013-05-13 16:09:19 +0200
committerBenjamin Dobell <ben@ben-opensuse.ben-opensuse>2013-05-13 16:09:19 +0200
commit858a3470e926fe3fbc605a136c2adb3b7012d1e2 (patch)
tree042a33396dc35eed778e6e43bb38705eb82078df /heimdall-frontend/doc-pak
parentMinor build file clean-up for linux and regenerated autotools output for 1.4.0 release. (diff)
downloadHeimdall-858a3470e926fe3fbc605a136c2adb3b7012d1e2.tar
Heimdall-858a3470e926fe3fbc605a136c2adb3b7012d1e2.tar.gz
Heimdall-858a3470e926fe3fbc605a136c2adb3b7012d1e2.tar.bz2
Heimdall-858a3470e926fe3fbc605a136c2adb3b7012d1e2.tar.lz
Heimdall-858a3470e926fe3fbc605a136c2adb3b7012d1e2.tar.xz
Heimdall-858a3470e926fe3fbc605a136c2adb3b7012d1e2.tar.zst
Heimdall-858a3470e926fe3fbc605a136c2adb3b7012d1e2.zip
Diffstat (limited to '')
-rw-r--r--heimdall-frontend/doc-pak/LICENSE19
-rw-r--r--heimdall-frontend/doc-pak/README535
2 files changed, 0 insertions, 554 deletions
diff --git a/heimdall-frontend/doc-pak/LICENSE b/heimdall-frontend/doc-pak/LICENSE
deleted file mode 100644
index 680dad9..0000000
--- a/heimdall-frontend/doc-pak/LICENSE
+++ /dev/null
@@ -1,19 +0,0 @@
-Copyright (c) 2010-2012 Benjamin Dobell, Glass Echidna
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.
diff --git a/heimdall-frontend/doc-pak/README b/heimdall-frontend/doc-pak/README
deleted file mode 100644
index a181796..0000000
--- a/heimdall-frontend/doc-pak/README
+++ /dev/null
@@ -1,535 +0,0 @@
-Heimdall (c) 2010-2012 Benjamin Dobell, Glass Echidna
-http://www.glassechidna.com.au/products/heimdall/
-
-DISCLAIMER:
-
- This software attempts to flash your Galaxy S device. The very nature of
- flashing is dangerous. As with all flashing software, Heimdall has the
- potential to damage (brick) your device if not used carefully. If you're
- concerned, don't use this software. Flashing ROMs onto your phone may also
- void your warranty. Benjamin Dobell and Glass Echidna are not responsible
- for the result of your actions.
-
-
-These instructions are for Linux operating systems.
-
-
-Flashing Heimdall Firmware Package with Heimdall Frontend:
-
- As of Heimdall Frontend 1.3 there are now two main ways to flash a ROM from
- Heimdall Frontend. The simpler and preferred option is to download a
- Heimdall Firmware Package and follow the following steps.
-
-
- 1. Fully charge your device (use the wall charger as it's faster).
-
- 2. Open the a terminal and run Heimdall Frontend by typing:
-
- heimdall-frontend
-
- 3. From the "Load Package" tab, under the "Heimdall Firmware Package"
- section click the "Browse" button.
-
- 4. Use the dialogue that appears to navigate to, and select, the Heimdall
- firmware package that you wish to flash.
-
- 5. You will see progress bars appear as the package is decompressed and
- extracted.
-
- When the package has finished being decompressed you should see
- information about the particular firmware package that has been
- selected.
-
- 6. Verify that your device is listed under "Supported Devices". If it's not
- then STOP immediately! DO NOT flash this firmware to your device!
- Instead search for an appropriate firmware package for your device.
-
- If you believe there is a mistake and your device is actually
- supported please get in contact with the firmware developer (not Glass
- Echidna!) and ask them to rectify the issue. If the developer provided
- a URL you may be able to contact them by pressing the "Homepage" button.
-
- 7. If you've verified your device is supported you may continue to press
- the "Load / Customise" button.
-
- 8. You should now be looking at the "Flash" tab. If not verify that you did
- in fact push the "Load / Customise" button.
-
- Generally, you won't NEED or WANT to customise a firmware package! In
- which case you can safely move on to step 9.
-
- Nonetheless, the "Flash" tab provides you with a means to customise the
- firmware package before flashing it to your device. See "Performing a
- Custom Flash with Heimdall Frontend" for more details.
-
- 9. Put your Galaxy S device into download mode and plug it in to your PC.
-
- Download mode can be accessed several different ways depending on your
- particular device model. If you're unsure how to do this please search
- online for the appropriate method.
-
- 10. Press the "Start" button.
-
- 11. Heimdall Frontend will display the progress and inform you when the
- flash is complete.
-
- If something went wrong i.e. your device wasn't detected because it
- wasn't in download mode, then the status section will let you know the
- cause of the problem.
-
-
-
-Performing a Custom Flash with Heimdall Frontend:
-
- This is the advanced means of flashing firmware to your device.
-
- If you're not an advanced user or a developer, in the event that a Heimdall
- Firmware Package doesn't exist for the particular firmware (or files) that
- you wish to flash, then I strongly recommend you get in touch with the
- developer of the firmware (or files) and politely ask them to create a
- Heimdall Firmware Package for you. In doing so, you avoid the risk of
- making mistakes due to inexperience.
-
-
- If you're looking to customise an existing Heimdall Firmware Package then
- follow steps 1-8 of "Flashing Heimdall Firmware Package with Heimdall
- Frontend" then start from below with step 5.
-
-
- 1. Fully charge your device (use the wall charger as it's faster).
-
- 2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package
- and extract everything to the one directory.
-
- 3. If the ROM is not a Heimdall Firmware Package it may instead be provided
- as multiple archives (nested or otherwise), extract them all to the same
- location.
-
- NOTE: If you want to use the CSC then extract it last. If you're asked
- to overwrite files then do so.
-
- 3. Open the a terminal and run Heimdall Frontend by typing:
-
- heimdall-frontend
-
- 4. Select the "Flash" tab. From the "Flash" tab you're able to completely
- customise a flash.
-
- 5. Before you can chose which partitions you want to flash with particular
- files you MUST first select a PIT file. To do this click the "Browse"
- button in the "PIT" section. This will open a dialogue allowing you to
- navigate to and select a valid PIT (.pit) file.
-
- If you do not already have a valid PIT file stored on your computer you
- can download your device's PIT file from the "Utilities" tab.
-
- 6. If a valid PIT file has been selected then the "Add" button below the
- "Partitions (Files)" list-box will be enabled. Press this button to add
- a partition to your flash.
-
- 7. When you first add a partition you will see the "Partition Name" and
- "Partition ID" be populated with information. Use the "Partition Name"
- drop down to select which partition you wish to flash. "Partition ID"
- will automatically update and is never directly editable.
-
- 8. You must then select a file to flash to the partition that you just
- specified using the "Browse" button under the "File / Partition". You
- will not be able to flash, create a firmware package or add another
- partition until you have selected a file. However, you're still able to
- press the "Remove" button if you've decided not to flash the partition
- you've just specified.
-
- 9. When you've specified a file name then you'll be able to see the updated
- information in the partition list to the right. You can select any
- partition from this list and customise it as you see fit.
-
- You can also remove a partition from the list by selecting it and
- clicking the "Remove" button. Removing a partition from the list doesn't
- remove it from your device, it simply means it will not be flashed.
-
- 10. Repeat steps 7-9 as often as needed to specify all the partions/files
- that you wish to flash.
-
- 11. Now you can chose whether you would like to repartition your device as
- well as whether you would like to prevent the device rebooting once a
- flash has been completed. These options can be enabled or disabled by
- toggling the "Repartition" and "No Reboot" check-boxes.
-
- In the general case you will only need to enable repartition if you wish
- to change the PIT file on your device. Keep in mind that repartitioning
- will wipe your device!
-
- The "No Reboot" option is rarely required. It's mostly in place so you
- can manually boot straight into recovery mode after a flash (rather than
- booting up normally).
-
- 12. If you've added at least one partition to your flash (and selected a
- file for that partition) then the "Start" button will be enabled. Press
- the "Start" button to begin the flashing process.
-
- You may notice that the "Create Package" tab becomes available at the
- whenever the "Start" button becomes available. From this tab you're able
- to create a reusable, redistributable Heimdall Firmware Package with the
- files and partitions you just selected. See "How to Create a Heimdall
- Firmware Package" for details.
-
- 13. Heimdall Frontend will display the progress and inform you when the
- flash is complete.
-
- If something went wrong i.e. your device wasn't detected because it
- wasn't in download mode, then the status section will let you know the
- cause of the problem.
-
-
-
-Flashing Firmware from Command Line:
-
- 1. Fully charge your phone (use the wall charger as it's faster).
-
- 2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package
- and extract everything to the one directory.
-
- 3. If the ROM is not a Heimdall Firmware Package it may instead be provided
- as multiple archives (nested or otherwise), extract them all to the same
- location.
-
- NOTE: If you want to use the CSC then extract it last.
-
- 4. Put your Galaxy S device into download mode and plug it in..
-
- 5. Open a terminal and navigate to the directory where you extracted
- the ROM/firmware files.
-
- 6. Type the following to list all the functionality Heimdall supports:
-
- heimdall help
-
- 7. Use the instructions to manually enter a command with all the files you
- want to flash.
-
- Here is an example that does a full flash and repartition on a GT-I9000:
-
- heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin
-
-
- 8. Heimdall will display the progress as it flashes so that you know things
- are working as they should.
-
-
-
-How to Create a Heimdall Firmware Package:
-
- Firstly, Heimdall's firmware package format is just a regular TAR archive
- compressed with gzip. The only two real requirements are that a valid
- firmware.xml must be included (refer to Appendix A) and you can only
- include files (no directories, links etc.) As such if you'd like there is
- nothing preventing you from creating Heimdall packages manually. Of course
- Heimdall Frontend provides a simple user interface that takes care of all
- the hard work for you.
-
- There are two ways in which you can create a firmware package. You can
- create a package from scratch, or you can load an existing package, apply
- modifications and then save the package. Creating a package from scratch
- is the preferred approach, by taking this approach you're far less likely
- to run into file name length limitations.
-
- Before you can access Heimdall Frontend's firmware creation functionality
- (available from the "Create Package" tab) you must first specify which
- files will be included in your package, as well as a few flashing options
- i.e. Whether or not users should repartition when flashing. This
- information must be filled out from the "Flash" tab in exactly the same
- fashion you would provide information to flash your device (see "Performing
- a Custom Flash with Heimdall Frontend"). As mentioned above, it's not the
- preferred means, but you're able to load an existing package as a starting
- point for this information.
-
- Once you've specified the files/partitions you wish to include in your
- firmware package the "Create Package" tab will become available. Clicking
- this tab will display additional information that you can include in your
- package. In order to continue you must fill out all sections except for the
- URLs section, which is optional. The following is a break-down of what all
- these options mean.
-
- - General Firmware Information: -
-
- Firmware Name - This is the name of your particular firmware. An
- example would be "Cyanogenmod".
-
- Firmware Version - This is the version identifier for your package. Any
- valid string will be accepted, although the inclusion of decimal
- point version number is preferred i.e. "7.1". If it makes sense
- then feel free to append a text string like "RC1" or "Beta 1" to
- the decimal point version.
-
- Platform Name - This is the name of platform (or operating system) that
- your firmware is based on. In most cases this will simply be
- "Android".
-
- Platform Version - This is the operating system version that your
- firmware is based on. Again decimal point version numbers are
- preferred over text, i.e. "2.3.4" is preferred over "Gingerbread".
-
-
- - Developers -
-
- URLs (Optional):
-
- Homepage - Here you can enter your personal URL or a URL particularly
- pertaining to the firmware being packaged. The URL must be well
- formed for it to work. An example of a well formed URL is
- "http://www.glassechidna.com.au/products/heimdall/". It is
- important to include "http://" in order to specify the protocol as
- other protocols such as "ftp://" are equally valid although
- unlikely to be used.
-
- Donate - Here you can enter a URL that will link users to a page to
- make donations for the effort you've put into developing your
- firmware. Once again the URL must be well formed but there is no
- requirement on how your donation page should work. For instance
- both "http://www.glassechidna.com.au/donate/" and
- "http://forum.xda-developers.com/donatetome.php?u=2710388" are
- equally valid.
-
- Developer Info:
-
- Name - Here you can enter in the name of individual team members or a
- team name. Click "Add" and the developer will be added to the list
- on the right. If you make a mistake you can select a developer from
- the list and click "Remove". You can list as many developers as you
- like, however visual constraints of the "Load Package" tab means
- only a few names will be visible. Where possible you may want to
- opt for team names over listing individual team members.
-
-
- - Supported Devices -
-
- This section allows you to create a list of devices that are supported by
- your particular firmware. Although Heimdall isn't capable of enforcing this
- we strongly recommend you take this section seriously. If filled out
- correctly you could help save a number of accidental bricks!
-
- Device Info:
-
- Manufacturer - This is where you can enter the name of the manufacturer
- for a particular device. For now this will most likely be
- "Samsung".
-
- Name - This is the human readable name for a particular device.
- "Galaxy S", "Galaxy S II", "Droid Charge", "Vibrant" and
- "Galaxy S (Telstra)" are all valid names. There are a lot of
- possible variations here so be as specific as you think is
- necessary.
-
- Product Code - This is by far the most important bit of device
- information. Device names tend to be region specific and further
- subject to the whims of telecommunication companies and resellers.
- Product Codes (or product IDs) are designated by manufacturers and
- are generally the definitive means of referring to a particular
- device. Examples are "GT-I9000", "GT-I9100" and "SCH-I897". If
- you're unsure of a particular product code then both Google and
- GSMArena are your friends!
-
-
- After filling out all the necessary information the "Build" button will be
- enabled. If it's still disabled then you know you're missing some required
- information. In particular you must specify at least one developer and at
- least one supported device. Pressing the "Build" button will bring up a
- save dialogue where you must chose a file name for your particular package.
- Don't worry about specifying the ".tar.gz" extension Heimdall Frontend will
- take care of this automatically.
-
- Once you've chosen a file name Heimdall Frontend will begin the process of
- building the firmware package. In doing so a valid firmware.xml file will
- be generated from the information entered. All files will be archived in a
- single TAR file then the TAR archive will be compressed via gzip
- compression. Compression will take a little while but you will see progress
- bars so you know the application hasn't hung. When the progress bars
- disappear you're finished making your package.
-
- Congratulations! You're now ready to redistribute your firmware package
- online or by any means you see fit.
-
-
-
-Appendix A - firmware.xml
-
-The following details a part of the Heimdall Firmware Package format. This
-is only relevant to developers or advanced users who wish to create Heimdall
-Firmware Packages outside of Heimdall Frontend or in some way integrate support
-for the format in their own software.
-
-
-All Heimdall Firmware Packages must contain a file called firmware.xml. This
-file stores flash information and meta-data for the package as well as
-information about other files contained within the package.
-
-
-The format is fairly straight-forward so it won't be explained in great detail.
-Nonetheless the following is an example of a valid firmware.xml file.
-
-<?xml version="1.0" encoding="UTF-8"?>
-<firmware version="1">
- <name>Test Firmware</name>
- <version>1.1</version>
- <platform>
- <name>Android</name>
- <version>2.3.4</version>
- </platform>
- <developers>
- <name>Benjamin Dobell</name>
- <name>Hedonism Bot</name>
- </developers>
- <url>http://www.glassechidna.com.au/</url>
- <donateurl>http://www.glassechidna.com.au/donate/</donateurl>
- <devices>
- <device>
- <manufacturer>Samsung</manufacturer>
- <product>GT-I9000</product>
- <name>Galaxy S</name>
- </device>
- <device>
- <manufacturer>Samsung</manufacturer>
- <product>GT-I9000T</product>
- <name>Galaxy S (Telstra)</name>
- </device>
- <device>
- <manufacturer>Samsung</manufacturer>
- <product>GT-I9000M</product>
- <name>Vibrant</name>
- </device>
- </devices>
- <pit>Nl3276-I9000 s1_odin_20100512.pit</pit>
- <repartition>0</repartition>
- <noreboot>0</noreboot>
- <files>
- <file>
- <id>0</id>
- <filename>gq3276-boot.bin</filename>
- </file>
- <file>
- <id>24</id>
- <filename>Uh3276-cache.rfs</filename>
- </file>
- <file>
- <id>22</id>
- <filename>em3276-factoryfs.rfs</filename>
- </file>
- <file>
- <id>11</id>
- <filename>fl3276-modem.bin</filename>
- </file>
- <file>
- <id>21</id>
- <filename>Xd3276-param.lfs</filename>
- </file>
- <file>
- <id>3</id>
- <filename>if3276-Sbl.bin</filename>
- </file>
- <file>
- <id>6</id>
- <filename>cr3276-zImage</filename>
- </file>
- </files>
-</firmware>
-
-
-New lines need not be included and the order in which elements are specified
-does not need to match that of the above example.
-
-One and only one <firmware> element must be included. The <firmware> element
-must also have a version attribute specified. The version must be parsable as
-an integer and indicates what version of the Heimdall Firmware Package
-specification the package adheres to.
-
-All data is stored as strings, however a <file>'s <id> element must be parsable
-as an integer. The <id> value represents the partition ID (according to the
-specified PIT file) that the file should be flashed to.
-
-A <firmware>'s <repartition> and <noreboot> elements must also be parsable as
-an integer. However, as they represent boolean values, a value of zero ("0")
-means false (or disabled) where as a non-zero value (typically "1") means true
-(or enabled).
-
-File names are specified relative to the TAR archive in which firmware.xml and
-all other files are to be stored. Heimdall Firmware Packages do not support
-directories or links, as such file names should only be a name and not a path.
-
-<url> and <donateurl> are the only optional elements, all other elements must
-be included.
-
-
-
-Appendix B - Installing Heimdall from Source:
-
- 1. First make sure you have installed build-tools, pkgconfig, zlib-dev and
- libusb-1.0-dev (v1.0.8 or newer).
-
- NOTE: Package names may not be absolutely identical to those above.
-
- 2. Open a terminal and navigate to the directory you downloaded,
- or extracted, Heimdall to.
-
- 3. Enter the following commands to compile libpit:
-
- cd libpit
- ./configure
- make
- cd ..
-
- If you have problems please consult http://www.libusb.org/
-
- 4. Enter the following commands to compile libpit.
-
- cd libusb-1.0
- ./configure
- make
- cd ..
-
- NOTE: There is no need to run "sudo make install".
-
- 4. Enter the following commands to compile and install Heimdall:
-
- cd heimdall
- ./configure
- make
- sudo make install
- cd ..
-
- NOTE: As an alternative to "sudo make install" you may chose to generate
- a package by typing the following:
-
- sudo checkinstall --pkgversion <version>
-
- Where <version> is the current Heimdall release e.g. 1.3.0
-
- 5. Done
-
-
-
-Appendix C - Installing Heimdall Frontend from Source:
-
- 1. Compile and install Heimdall, see Appendix B.
-
- 2. First make sure you have installed Qt 4.7 or later, available from:
-
- http://qt.nokia.com/downloads/
-
- 3. Open a terminal and navigate to the directory you extracted Heimdall to.
-
- 4. Enter the following commands to compile and install Heimdall Frontend:
-
- cd heimdall-frontend
- qmake-qt4 heimdall-frontend.pro
- make
- sudo make install
-
- NOTE: As an alternative to "sudo make install" you may chose to generate
- a package by typing the following:
-
- sudo checkinstall --pkgversion <version>
-
- Where <version> is the current Heimdall release e.g. 1.3.0
-
- 5. Done
-