1 files changed, 0 insertions, 202 deletions

diff --git a/libjpegtwrp/jdhuff.h b/libjpegtwrp/jdhuff.h
deleted file mode 100644
index 5760a134e..000000000
--- a/libjpegtwrp/jdhuff.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * jdhuff.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for Huffman entropy decoding routines
- * that are shared between the sequential decoder (jdhuff.c) and the
- * progressive decoder (jdphuff.c).  No other modules need to see these.
- */
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_make_d_derived_tbl	jMkDDerived
-#define jpeg_fill_bit_buffer	jFilBitBuf
-#define jpeg_huff_decode	jHufDecode
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/* Derived data constructed for each Huffman table */
-
-#define HUFF_LOOKAHEAD	8	/* # of bits of lookahead */
-
-typedef struct {
-  /* Basic tables: (element [0] of each array is unused) */
-  INT32 maxcode[18];		/* largest code of length k (-1 if none) */
-  /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
-  INT32 valoffset[17];		/* huffval[] offset for codes of length k */
-  /* valoffset[k] = huffval[] index of 1st symbol of code length k, less
-   * the smallest code of length k; so given a code of length k, the
-   * corresponding symbol is huffval[code + valoffset[k]]
-   */
-
-  /* Link to public Huffman table (needed only in jpeg_huff_decode) */
-  JHUFF_TBL *pub;
-
-  /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of
-   * the input data stream.  If the next Huffman code is no more
-   * than HUFF_LOOKAHEAD bits long, we can obtain its length and
-   * the corresponding symbol directly from these tables.
-   */
-  int look_nbits[1<<HUFF_LOOKAHEAD]; /* # bits, or 0 if too long */
-  UINT8 look_sym[1<<HUFF_LOOKAHEAD]; /* symbol, or unused */
-} d_derived_tbl;
-
-/* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_d_derived_tbl
-	JPP((j_decompress_ptr cinfo, boolean isDC, int tblno,
-	     d_derived_tbl ** pdtbl));
-
-
-/*
- * Fetching the next N bits from the input stream is a time-critical operation
- * for the Huffman decoders.  We implement it with a combination of inline
- * macros and out-of-line subroutines.  Note that N (the number of bits
- * demanded at one time) never exceeds 15 for JPEG use.
- *
- * We read source bytes into get_buffer and dole out bits as needed.
- * If get_buffer already contains enough bits, they are fetched in-line
- * by the macros CHECK_BIT_BUFFER and GET_BITS.  When there aren't enough
- * bits, jpeg_fill_bit_buffer is called; it will attempt to fill get_buffer
- * as full as possible (not just to the number of bits needed; this
- * prefetching reduces the overhead cost of calling jpeg_fill_bit_buffer).
- * Note that jpeg_fill_bit_buffer may return FALSE to indicate suspension.
- * On TRUE return, jpeg_fill_bit_buffer guarantees that get_buffer contains
- * at least the requested number of bits --- dummy zeroes are inserted if
- * necessary.
- */
-
-typedef INT32 bit_buf_type;	/* type of bit-extraction buffer */
-#define BIT_BUF_SIZE  32	/* size of buffer in bits */
-#define LOG_TWO_BIT_BUF_SIZE  5	/* log_2(BIT_BUF_SIZE) */
-
-/* If long is > 32 bits on your machine, and shifting/masking longs is
- * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE
- * appropriately should be a win.  Unfortunately we can't define the size
- * with something like  #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
- * because not all machines measure sizeof in 8-bit bytes.
- */
-
-typedef struct {		/* Bitreading state saved across MCUs */
-  bit_buf_type get_buffer;	/* current bit-extraction buffer */
-  int bits_left;		/* # of unused bits in it */
-} bitread_perm_state;
-
-typedef struct {		/* Bitreading working state within an MCU */
-  /* Current data source location */
-  /* We need a copy, rather than munging the original, in case of suspension */
-  const JOCTET * next_input_byte; /* => next byte to read from source */
-  size_t bytes_in_buffer;	/* # of bytes remaining in source buffer */
-  /* Bit input buffer --- note these values are kept in register variables,
-   * not in this struct, inside the inner loops.
-   */
-  bit_buf_type get_buffer;	/* current bit-extraction buffer */
-  int bits_left;		/* # of unused bits in it */
-  /* Pointer needed by jpeg_fill_bit_buffer. */
-  j_decompress_ptr cinfo;	/* back link to decompress master record */
-} bitread_working_state;
-
-/* Macros to declare and load/save bitread local variables. */
-#define BITREAD_STATE_VARS  \
-	register bit_buf_type get_buffer;  \
-	register int bits_left;  \
-	bitread_working_state br_state
-
-#define BITREAD_LOAD_STATE(cinfop,permstate)  \
-	br_state.cinfo = cinfop; \
-	br_state.next_input_byte = cinfop->src->next_input_byte; \
-	br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \
-	get_buffer = permstate.get_buffer; \
-	bits_left = permstate.bits_left;
-
-#define BITREAD_SAVE_STATE(cinfop,permstate)  \
-	cinfop->src->next_input_byte = br_state.next_input_byte; \
-	cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \
-	permstate.get_buffer = get_buffer; \
-	permstate.bits_left = bits_left
-
-/*
- * These macros provide the in-line portion of bit fetching.
- * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer
- * before using GET_BITS, PEEK_BITS, or DROP_BITS.
- * The variables get_buffer and bits_left are assumed to be locals,
- * but the state struct might not be (jpeg_huff_decode needs this).
- *	CHECK_BIT_BUFFER(state,n,action);
- *		Ensure there are N bits in get_buffer; if suspend, take action.
- *      val = GET_BITS(n);
- *		Fetch next N bits.
- *      val = PEEK_BITS(n);
- *		Fetch next N bits without removing them from the buffer.
- *	DROP_BITS(n);
- *		Discard next N bits.
- * The value N should be a simple variable, not an expression, because it
- * is evaluated multiple times.
- */
-
-#define CHECK_BIT_BUFFER(state,nbits,action) \
-	{ if (bits_left < (nbits)) {  \
-	    if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits))  \
-	      { action; }  \
-	    get_buffer = (state).get_buffer; bits_left = (state).bits_left; } }
-
-#define GET_BITS(nbits) \
-	(((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1))
-
-#define PEEK_BITS(nbits) \
-	(((int) (get_buffer >> (bits_left -  (nbits)))) & ((1<<(nbits))-1))
-
-#define DROP_BITS(nbits) \
-	(bits_left -= (nbits))
-
-/* Load up the bit buffer to a depth of at least nbits */
-EXTERN(boolean) jpeg_fill_bit_buffer
-	JPP((bitread_working_state * state, register bit_buf_type get_buffer,
-	     register int bits_left, int nbits));
-
-
-/*
- * Code for extracting next Huffman-coded symbol from input bit stream.
- * Again, this is time-critical and we make the main paths be macros.
- *
- * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits
- * without looping.  Usually, more than 95% of the Huffman codes will be 8
- * or fewer bits long.  The few overlength codes are handled with a loop,
- * which need not be inline code.
- *
- * Notes about the HUFF_DECODE macro:
- * 1. Near the end of the data segment, we may fail to get enough bits
- *    for a lookahead.  In that case, we do it the hard way.
- * 2. If the lookahead table contains no entry, the next code must be
- *    more than HUFF_LOOKAHEAD bits long.
- * 3. jpeg_huff_decode returns -1 if forced to suspend.
- */
-
-#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \
-{ register int nb, look; \
-  if (bits_left < HUFF_LOOKAHEAD) { \
-    if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \
-    get_buffer = state.get_buffer; bits_left = state.bits_left; \
-    if (bits_left < HUFF_LOOKAHEAD) { \
-      nb = 1; goto slowlabel; \
-    } \
-  } \
-  look = PEEK_BITS(HUFF_LOOKAHEAD); \
-  if ((nb = htbl->look_nbits[look]) != 0) { \
-    DROP_BITS(nb); \
-    result = htbl->look_sym[look]; \
-  } else { \
-    nb = HUFF_LOOKAHEAD+1; \
-slowlabel: \
-    if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \
-	{ failaction; } \
-    get_buffer = state.get_buffer; bits_left = state.bits_left; \
-  } \
-}
-
-/* Out-of-line case for Huffman code fetching */
-EXTERN(int) jpeg_huff_decode
-	JPP((bitread_working_state * state, register bit_buf_type get_buffer,
-	     register int bits_left, d_derived_tbl * htbl, int min_bits));