summaryrefslogtreecommitdiffstats
path: root/crypto
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--crypto/vold_decrypt/Android.mk87
-rwxr-xr-xcrypto/vold_decrypt/init.recovery.vold_decrypt.qseecomd.rc14
-rwxr-xr-xcrypto/vold_decrypt/init.recovery.vold_decrypt.rc10
-rw-r--r--crypto/vold_decrypt/vold_decrypt.cpp599
-rw-r--r--crypto/vold_decrypt/vold_decrypt.h26
5 files changed, 736 insertions, 0 deletions
diff --git a/crypto/vold_decrypt/Android.mk b/crypto/vold_decrypt/Android.mk
new file mode 100644
index 000000000..e371c24e7
--- /dev/null
+++ b/crypto/vold_decrypt/Android.mk
@@ -0,0 +1,87 @@
+# Copyright (C) 2017 TeamWin Recovery Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH := $(call my-dir)
+
+ifeq ($(TW_INCLUDE_CRYPTO), true)
+ ifneq ($(TW_CRYPTO_USE_SYSTEM_VOLD),)
+ ifneq ($(TW_CRYPTO_USE_SYSTEM_VOLD),false)
+
+
+ # Parse TW_CRYPTO_USE_SYSTEM_VOLD
+ ifeq ($(TW_CRYPTO_USE_SYSTEM_VOLD),true)
+ # Just enabled, so only vold + vdc
+ services :=
+ else
+ # Additional services needed by vold
+ services := $(TW_CRYPTO_USE_SYSTEM_VOLD)
+ endif
+
+ # List of .rc files for each additional service
+ rc_files := $(foreach item,$(services),init.recovery.vold_decrypt.$(item).rc)
+
+
+ include $(CLEAR_VARS)
+ LOCAL_MODULE := init.recovery.vold_decrypt.rc
+ LOCAL_MODULE_TAGS := eng
+ LOCAL_MODULE_CLASS := RECOVERY_EXECUTABLES
+
+ # Cannot send to TARGET_RECOVERY_ROOT_OUT since build system wipes init*.rc
+ # during ramdisk creation and only allows init.recovery.*.rc files to be copied
+ # from TARGET_ROOT_OUT thereafter
+ LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
+
+ LOCAL_SRC_FILES := $(LOCAL_MODULE)
+
+ # Add additional .rc files and imports into init.recovery.vold_decrypt.rc
+ # Note: any init.recovery.vold_decrypt.{service}.rc that are not default
+ # in crypto/vold_decrypt should be in the device tree
+ LOCAL_POST_INSTALL_CMD := $(hide) \
+ $(foreach item, $(rc_files), \
+ sed -i '1iimport \/$(item)' "$(TARGET_ROOT_OUT)/$(LOCAL_MODULE)"; \
+ if [ -f "$(LOCAL_PATH)/$(item)" ]; then \
+ cp -f "$(LOCAL_PATH)/$(item)" "$(TARGET_ROOT_OUT)"/; \
+ fi; \
+ )
+ include $(BUILD_PREBUILT)
+
+
+ include $(CLEAR_VARS)
+ LOCAL_MODULE := libvolddecrypt
+ LOCAL_MODULE_TAGS := eng optional
+ LOCAL_CFLAGS := -Wall
+ ifeq ($(shell test $(PLATFORM_SDK_VERSION) -lt 23; echo $$?),0)
+ LOCAL_C_INCLUDES += external/stlport/stlport bionic bionic/libstdc++/include
+ endif
+
+ ifneq ($(services),)
+ LOCAL_CFLAGS += -DTW_CRYPTO_SYSTEM_VOLD_SERVICES='"$(services)"'
+ endif
+
+ ifeq ($(TW_CRYPTO_SYSTEM_VOLD_DEBUG),true)
+ # Enabling strace will expose the password in the strace logs!!
+ LOCAL_CFLAGS += -DTW_CRYPTO_SYSTEM_VOLD_DEBUG
+ endif
+
+ ifeq ($(TW_CRYPTO_SYSTEM_VOLD_DISABLE_TIMEOUT),true)
+ LOCAL_CFLAGS += -DTW_CRYPTO_SYSTEM_VOLD_DISABLE_TIMEOUT
+ endif
+
+ LOCAL_SRC_FILES = vold_decrypt.cpp
+ LOCAL_SHARED_LIBRARIES := libcutils
+ include $(BUILD_STATIC_LIBRARY)
+
+ endif
+ endif
+endif
diff --git a/crypto/vold_decrypt/init.recovery.vold_decrypt.qseecomd.rc b/crypto/vold_decrypt/init.recovery.vold_decrypt.qseecomd.rc
new file mode 100755
index 000000000..06bdebcd3
--- /dev/null
+++ b/crypto/vold_decrypt/init.recovery.vold_decrypt.qseecomd.rc
@@ -0,0 +1,14 @@
+on fs
+ # needed to make qseecomd work in recovery
+ chmod 0660 /dev/qseecom
+ chown system drmrpc /dev/qseecom
+ chmod 0664 /dev/ion
+ chown system system /dev/ion
+
+service sys_qseecomd /system/bin/qseecomd
+ user root
+ group root
+ setenv PATH /system/bin
+ setenv LD_LIBRARY_PATH /system/lib64:/system/lib
+ disabled
+ oneshot
diff --git a/crypto/vold_decrypt/init.recovery.vold_decrypt.rc b/crypto/vold_decrypt/init.recovery.vold_decrypt.rc
new file mode 100755
index 000000000..65983eb25
--- /dev/null
+++ b/crypto/vold_decrypt/init.recovery.vold_decrypt.rc
@@ -0,0 +1,10 @@
+
+service sys_vold /system/bin/vold \
+ --blkid_context=u:r:blkid:s0 --blkid_untrusted_context=u:r:blkid_untrusted:s0 \
+ --fsck_context=u:r:fsck:s0 --fsck_untrusted_context=u:r:fsck_untrusted:s0
+ socket vold stream 0660 root mount
+ socket cryptd stream 0660 root mount
+ setenv PATH /system/bin
+ setenv LD_LIBRARY_PATH /system/lib64:/system/lib
+ disabled
+ oneshot
diff --git a/crypto/vold_decrypt/vold_decrypt.cpp b/crypto/vold_decrypt/vold_decrypt.cpp
new file mode 100644
index 000000000..c9faf4733
--- /dev/null
+++ b/crypto/vold_decrypt/vold_decrypt.cpp
@@ -0,0 +1,599 @@
+/*
+ Copyright 2017 TeamWin
+ This file is part of TWRP/TeamWin Recovery Project.
+
+ TWRP is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ TWRP is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with TWRP. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sys/time.h>
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_DEBUG
+#include <signal.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#endif
+
+#include <string>
+#include <vector>
+#include <sstream>
+
+#include "../../twcommon.h"
+#include "../../partitions.hpp"
+#include "../../twrp-functions.hpp"
+#include "../../gui/gui.hpp"
+
+using namespace std;
+
+extern "C" {
+ #include <cutils/properties.h>
+}
+
+/* Timeouts as defined by ServiceManager */
+
+/* The maximum amount of time to wait for a service to start or stop,
+ * in micro-seconds (really an approximation) */
+#define SLEEP_MAX_USEC 2000000 /* 2 seconds */
+/* The minimal sleeping interval between checking for the service's state
+ * when looping for SLEEP_MAX_USEC */
+#define SLEEP_MIN_USEC 200000 /* 200 msec */
+
+
+#define LOGDECRYPT(...) do { printf(__VA_ARGS__); if (fp_kmsg) { fprintf(fp_kmsg, "[VOLD_DECRYPT]" __VA_ARGS__); fflush(fp_kmsg); } } while (0)
+#define LOGDECRYPT_KMSG(...) do { if (fp_kmsg) { fprintf(fp_kmsg, "[VOLD_DECRYPT]" __VA_ARGS__); fflush(fp_kmsg); } } while (0)
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_SERVICES
+typedef struct {
+ string service_name;
+ string twrp_svc_name;
+ bool is_running;
+ bool resume;
+} AdditionalService;
+#endif
+
+FILE *fp_kmsg = NULL;
+bool has_timeout = false;
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_DEBUG
+bool has_strace = false;
+
+pid_t strace_init(void) {
+ if (!has_strace)
+ return -1;
+
+ pid_t pid;
+ switch(pid = fork())
+ {
+ case -1:
+ LOGDECRYPT_KMSG("forking strace_init failed: %d!\n", errno);
+ return -1;
+ case 0: // child
+ execl("/sbin/strace", "strace", "-q", "-tt", "-ff", "-v", "-y", "-s", "1000", "-o", "/tmp/strace_init.log", "-p", "1" , NULL);
+ LOGDECRYPT_KMSG("strace_init fork failed: %d!\n", errno);
+ exit(-1);
+ default:
+ LOGDECRYPT_KMSG("Starting strace_init (pid=%d)\n", pid);
+ return pid;
+ }
+}
+#endif
+
+/* Convert a binary key of specified length into an ascii hex string equivalent,
+ * without the leading 0x and with null termination
+ *
+ * Original code from cryptfs.c
+ */
+string convert_key_to_hex_ascii(string master_key) {
+ size_t i;
+ unsigned char nibble;
+ string master_key_ascii = "";
+
+ for (i = 0; i < master_key.size(); ++i) {
+ nibble = (master_key[i] >> 4) & 0xf;
+ nibble += nibble > 9 ? 0x57 : 0x30;
+ master_key_ascii += nibble;
+
+ nibble = master_key[i] & 0xf;
+ nibble += nibble > 9 ? 0x57 : 0x30;
+ master_key_ascii += nibble;
+ }
+
+ return master_key_ascii;
+}
+
+string wait_for_property(string property_name, int utimeout = SLEEP_MAX_USEC, string expected_value = "not_empty") {
+ char prop_value[PROPERTY_VALUE_MAX];
+
+ if (expected_value == "not_empty") {
+ while (utimeout > 0) {
+ property_get(property_name.c_str(), prop_value, "error");
+ if (strcmp(prop_value, "error") != 0)
+ break;
+ LOGDECRYPT_KMSG("waiting for %s to get set\n", property_name.c_str());
+ utimeout -= SLEEP_MIN_USEC;
+ usleep(SLEEP_MIN_USEC);;
+ }
+ }
+ else {
+ while (utimeout > 0) {
+ property_get(property_name.c_str(), prop_value, "error");
+ if (strcmp(prop_value, expected_value.c_str()) == 0)
+ break;
+ LOGDECRYPT_KMSG("waiting for %s to change from '%s' to '%s'\n", property_name.c_str(), prop_value, expected_value.c_str());
+ utimeout -= SLEEP_MIN_USEC;
+ usleep(SLEEP_MIN_USEC);;
+ }
+ }
+ property_get(property_name.c_str(), prop_value, "error");
+
+ return prop_value;
+}
+
+bool Service_Exists(string initrc_svc) {
+ char prop_value[PROPERTY_VALUE_MAX];
+ string init_svc = "init.svc." + initrc_svc;
+ property_get(init_svc.c_str(), prop_value, "error");
+ return (strcmp(prop_value, "error") != 0);
+}
+
+bool Is_Service_Running(string initrc_svc) {
+ char prop_value[PROPERTY_VALUE_MAX];
+ string init_svc = "init.svc." + initrc_svc;
+ property_get(init_svc.c_str(), prop_value, "error");
+ return (strcmp(prop_value, "running") == 0);
+}
+
+bool Is_Service_Stopped(string initrc_svc) {
+ char prop_value[PROPERTY_VALUE_MAX];
+ string init_svc = "init.svc." + initrc_svc;
+ property_get(init_svc.c_str(), prop_value, "error");
+ return (strcmp(prop_value, "stopped") == 0);
+}
+
+bool Start_Service(string initrc_svc, int utimeout = SLEEP_MAX_USEC) {
+ string res = "error";
+ string init_svc = "init.svc." + initrc_svc;
+
+ property_set("ctl.start", initrc_svc.c_str());
+
+ res = wait_for_property(init_svc, utimeout, "running");
+
+ LOGDECRYPT("Start service %s: %s.\n", initrc_svc.c_str(), res.c_str());
+
+ return (res == "running");
+}
+
+bool Stop_Service(string initrc_svc, int utimeout = SLEEP_MAX_USEC) {
+ string res = "error";
+
+ if (Service_Exists(initrc_svc)) {
+ string init_svc = "init.svc." + initrc_svc;
+ property_set("ctl.stop", initrc_svc.c_str());
+ res = wait_for_property(init_svc, utimeout, "stopped");
+ LOGDECRYPT("Stop service %s: %s.\n", initrc_svc.c_str(), res.c_str());
+ }
+
+ return (res == "stopped");
+}
+
+void output_dmesg_to_recoverylog(void) {
+ TWFunc::Exec_Cmd(
+ "echo \"---- DMESG LOG FOLLOWS ----\";"
+ "dmesg | grep 'DECRYPT\\|vold\\|qseecom\\|QSEECOM\\|keymaste\\|keystore\\|cmnlib';"
+ "echo \"---- DMESG LOG ENDS ----\""
+ );
+}
+
+void set_needed_props(void) {
+ // vold won't start without ro.storage_structure on Kitkat
+ string sdkverstr = TWFunc::System_Property_Get("ro.build.version.sdk");
+ int sdkver = 20;
+ if (!sdkverstr.empty()) {
+ sdkver = atoi(sdkverstr.c_str());
+ }
+ if (sdkver <= 19) {
+ string ro_storage_structure = TWFunc::System_Property_Get("ro.storage_structure");
+ if (!ro_storage_structure.empty())
+ property_set("ro.storage_structure", ro_storage_structure.c_str());
+ }
+}
+
+string vdc_cryptfs_cmd(string log_name) {
+ string cmd;
+
+ cmd = "LD_LIBRARY_PATH=/system/lib64:/system/lib /system/bin/vdc cryptfs";
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_DEBUG
+ if (has_timeout && has_strace)
+ cmd = "/sbin/strace -q -tt -ff -v -y -s 1000 -o /tmp/strace_vdc_" + log_name + " /sbin/timeout -t 30 -s KILL env " + cmd;
+ else if (has_strace)
+ cmd = "/sbin/strace -q -tt -ff -v -y -s 1000 -o /tmp/strace_vdc_" + log_name + " -E " + cmd;
+ else
+#endif
+ if (has_timeout)
+ cmd = "/sbin/timeout -t 30 -s KILL env " + cmd;
+
+ return cmd;
+}
+
+int run_vdc(string Password) {
+ int res = -1;
+ struct timeval t1, t2;
+ string vdc_res;
+ int vdc_r1, vdc_r2, vdc_r3;
+
+ LOGDECRYPT("About to run vdc...\n");
+
+ // Wait for vold connection
+ gettimeofday(&t1, NULL);
+ t2 = t1;
+ while ((t2.tv_sec - t1.tv_sec) < 5) {
+ vdc_res.clear();
+ // cryptfs getpwtype returns: R1=213(PasswordTypeResult) R2=? R3="password", "pattern", "pin", "default"
+ res = TWFunc::Exec_Cmd(vdc_cryptfs_cmd("connect") + " getpwtype", vdc_res);
+ std::replace(vdc_res.begin(), vdc_res.end(), '\n', ' '); // remove newline(s)
+ vdc_r1 = vdc_r2 = vdc_r3 = -1;
+ sscanf(vdc_res.c_str(), "%d", &vdc_r1);
+ if (vdc_r1 == 213) {
+ char str_res[sizeof(int) + 1];
+ snprintf(str_res, sizeof(str_res), "%d", res);
+ vdc_res += "ret=";
+ vdc_res += str_res;
+ res = 0;
+ break;
+ }
+ LOGDECRYPT("Retrying connection to vold\n");
+ usleep(SLEEP_MIN_USEC); // vdc usually usleep(10000), but that causes too many unnecessary attempts
+ gettimeofday(&t2, NULL);
+ }
+
+ if (res != 0)
+ return res;
+
+ LOGDECRYPT("Connected to vold (%s)\n", vdc_res.c_str());
+
+ // Input password from GUI, or default password
+ vdc_res.clear();
+ res = TWFunc::Exec_Cmd(vdc_cryptfs_cmd("passwd") + " checkpw '" + Password + "'", vdc_res);
+ std::replace(vdc_res.begin(), vdc_res.end(), '\n', ' '); // remove newline(s)
+ LOGDECRYPT("vdc cryptfs result (passwd): %s (ret=%d)\n", vdc_res.c_str(), res);
+ vdc_r1 = vdc_r2 = vdc_r3 = -1;
+ sscanf(vdc_res.c_str(), "%d %d %d", &vdc_r1, &vdc_r2, &vdc_r3);
+
+ if (vdc_r3 != 0) {
+ // try falling back to Lollipop hex passwords
+ string hexPassword = convert_key_to_hex_ascii(Password);
+ vdc_res.clear();
+ res = TWFunc::Exec_Cmd(vdc_cryptfs_cmd("hex_pw") + " checkpw '" + hexPassword + "'", vdc_res);
+ std::replace(vdc_res.begin(), vdc_res.end(), '\n', ' '); // remove newline(s)
+ LOGDECRYPT("vdc cryptfs result (hex_pw): %s (ret=%d)\n", vdc_res.c_str(), res);
+ vdc_r1 = vdc_r2 = vdc_r3 = -1;
+ sscanf(vdc_res.c_str(), "%d %d %d", &vdc_r1, &vdc_r2, &vdc_r3);
+ }
+
+ // vdc's return value is dependant upon source origin, it will either
+ // return 0 or vdc_r1, so disregard and focus on decryption instead
+ if (vdc_r3 == 0) {
+ // Decryption successful wait for crypto blk dev
+ wait_for_property("ro.crypto.fs_crypto_blkdev");
+ res = 0;
+ } else {
+ res = -1;
+ }
+
+ return res;
+}
+
+bool Symlink_Vendor_Folder(void) {
+ bool is_vendor_symlinked = false;
+
+ if (PartitionManager.Is_Mounted_By_Path("/vendor")) {
+ LOGDECRYPT("vendor partition mounted, skipping /vendor substitution\n");
+ }
+ else if (TWFunc::Path_Exists("/system/vendor")) {
+ LOGDECRYPT("Symlinking vendor folder...\n");
+ if (TWFunc::Path_Exists("/vendor") && rename("/vendor", "/vendor-orig") != 0) {
+ LOGDECRYPT("Failed to rename original /vendor folder: %s\n", strerror(errno));
+ } else {
+ TWFunc::Recursive_Mkdir("/vendor/firmware/keymaster");
+ LOGDECRYPT_KMSG("Symlinking /system/vendor/lib64 to /vendor/lib64 (res=%d)\n",
+ symlink("/system/vendor/lib64", "/vendor/lib64")
+ );
+ LOGDECRYPT_KMSG("Symlinking /system/vendor/lib to /vendor/lib (res=%d)\n",
+ symlink("/system/vendor/lib", "/vendor/lib")
+ );
+ is_vendor_symlinked = true;
+ property_set("vold_decrypt.symlinked_vendor", "1");
+ }
+ }
+ return is_vendor_symlinked;
+}
+
+void Restore_Vendor_Folder(void) {
+ property_set("vold_decrypt.symlinked_vendor", "0");
+ TWFunc::removeDir("/vendor", false);
+ rename("/vendor-orig", "/vendor");
+}
+
+bool Symlink_Firmware_Folder(void) {
+ bool is_firmware_symlinked = false;
+
+ if (PartitionManager.Is_Mounted_By_Path("/firmware")) {
+ LOGDECRYPT("firmware partition mounted, skipping /firmware substitution\n");
+ } else {
+ LOGDECRYPT("Symlinking firmware folder...\n");
+ if (TWFunc::Path_Exists("/firmware") && rename("/firmware", "/firmware-orig") != 0) {
+ LOGDECRYPT("Failed to rename original /firmware folder: %s\n", strerror(errno));
+ } else {
+ TWFunc::Recursive_Mkdir("/firmware/image");
+ is_firmware_symlinked = true;
+ property_set("vold_decrypt.symlinked_firmware", "1");
+ }
+ }
+ return is_firmware_symlinked;
+}
+
+void Restore_Firmware_Folder(void) {
+ property_set("vold_decrypt.symlinked_firmware", "0");
+ TWFunc::removeDir("/firmware", false);
+ rename("/firmware-orig", "/firmware");
+}
+
+void Symlink_Firmware_Files(bool is_vendor_symlinked, bool is_firmware_symlinked) {
+ if (!is_vendor_symlinked && !is_firmware_symlinked)
+ return;
+
+ LOGDECRYPT("Symlinking firmware files...\n");
+ string result_of_find;
+ TWFunc::Exec_Cmd("find /system -name keymaste*.* -type f -o -name cmnlib.* -type f 2>/dev/null", result_of_find);
+
+ stringstream ss(result_of_find);
+ string line;
+ int count = 0;
+
+ while(getline(ss, line)) {
+ const char *fwfile = line.c_str();
+ string base_name = TWFunc::Get_Filename(line);
+ count++;
+
+ if (is_firmware_symlinked) {
+ LOGDECRYPT_KMSG("Symlinking %s to /firmware/image/ (res=%d)\n", fwfile,
+ symlink(fwfile, ("/firmware/image/" + base_name).c_str())
+ );
+ }
+
+ if (is_vendor_symlinked) {
+ LOGDECRYPT_KMSG("Symlinking %s to /vendor/firmware/ (res=%d)\n", fwfile,
+ symlink(fwfile, ("/vendor/firmware/" + base_name).c_str())
+ );
+
+ LOGDECRYPT_KMSG("Symlinking %s to /vendor/firmware/keymaster/ (res=%d)\n", fwfile,
+ symlink(fwfile, ("/vendor/firmware/keymaster/" + base_name).c_str())
+ );
+ }
+ }
+ LOGDECRYPT("%d file(s) symlinked.\n", count);
+}
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_SERVICES
+vector<AdditionalService> Get_List_Of_Additional_Services (void) {
+ vector<AdditionalService> services;
+
+ vector<string> service_names = TWFunc::Split_String(TW_CRYPTO_SYSTEM_VOLD_SERVICES, " ");
+
+ for (size_t i = 0; i < service_names.size(); ++i) {
+ AdditionalService svc;
+ svc.service_name = service_names[i];
+ services.push_back(svc);
+ }
+
+ return services;
+}
+#endif
+
+int vold_decrypt(string Password)
+{
+ int res;
+ bool output_dmesg_to_log = false;
+ bool is_vendor_symlinked = false;
+ bool is_firmware_symlinked = false;
+ bool is_vold_running = false;
+
+ if (Password.empty()) {
+ LOGDECRYPT("vold_decrypt: password is empty!\n");
+ return -1;
+ }
+
+ // Mount system and check for vold and vdc
+ if (!PartitionManager.Mount_By_Path("/system", true)) {
+ return -1;
+ } else if (!TWFunc::Path_Exists("/system/bin/vold")) {
+ LOGDECRYPT("ERROR: /system/bin/vold not found, aborting.\n");
+ gui_msg(Msg(msg::kError, "decrypt_data_vold_os_missing=Missing files needed for vold decrypt: {1}")("/system/bin/vold"));
+ return -1;
+ } else if (!TWFunc::Path_Exists("/system/bin/vdc")) {
+ LOGDECRYPT("ERROR: /system/bin/vdc not found, aborting.\n");
+ gui_msg(Msg(msg::kError, "decrypt_data_vold_os_missing=Missing files needed for vold decrypt: {1}")("/system/bin/vdc"));
+ return -1;
+ }
+
+ fp_kmsg = fopen("/dev/kmsg", "a");
+
+ LOGDECRYPT("TW_CRYPTO_USE_SYSTEM_VOLD := true\n");
+ LOGDECRYPT("Attempting to use system's vold for decryption...\n");
+
+#ifndef TW_CRYPTO_SYSTEM_VOLD_DISABLE_TIMEOUT
+ has_timeout = TWFunc::Path_Exists("/sbin/timeout");
+ if (!has_timeout)
+ LOGDECRYPT("timeout binary not found, disabling timeout in vold_decrypt!\n");
+#endif
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_DEBUG
+ has_strace = TWFunc::Path_Exists("/sbin/strace");
+ if (!has_strace)
+ LOGDECRYPT("strace binary not found, disabling strace in vold_decrypt!\n");
+ pid_t pid_strace = strace_init();
+#endif
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_SERVICES
+ vector<AdditionalService> Services = Get_List_Of_Additional_Services();
+
+ // Check if TWRP is running any of the services
+ for (size_t i = 0; i < Services.size(); ++i) {
+ if (Service_Exists(Services[i].service_name))
+ Services[i].twrp_svc_name = Services[i].service_name;
+ else if (Service_Exists("sbin" + Services[i].service_name))
+ Services[i].twrp_svc_name = "sbin" + Services[i].service_name;
+ else
+ Services[i].twrp_svc_name.clear();
+
+ if (!Services[i].twrp_svc_name.empty() && !Is_Service_Stopped(Services[i].twrp_svc_name)) {
+ Services[i].resume = true;
+ Stop_Service(Services[i].twrp_svc_name);
+ } else
+ Services[i].resume = false;
+
+ // vold_decrypt system services have to be named sys_{service} in the .rc files
+ Services[i].service_name = "sys_" + Services[i].service_name;
+ }
+#endif
+
+ LOGDECRYPT("Setting up folders and permissions...\n");
+ is_vendor_symlinked = Symlink_Vendor_Folder();
+ is_firmware_symlinked = Symlink_Firmware_Folder();
+ Symlink_Firmware_Files(is_vendor_symlinked, is_firmware_symlinked);
+
+ set_needed_props();
+
+ // Start services needed for vold decrypt
+ LOGDECRYPT("Starting services...\n");
+#ifdef TW_CRYPTO_SYSTEM_VOLD_SERVICES
+ for (size_t i = 0; i < Services.size(); ++i) {
+ Services[i].is_running = Start_Service(Services[i].service_name);
+ }
+#endif
+ is_vold_running = Start_Service("sys_vold");
+
+ if (is_vold_running) {
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_SERVICES
+ for (size_t i = 0; i < Services.size(); ++i) {
+ if (!Is_Service_Running(Services[i].service_name) && Services[i].resume) {
+ // if system_service has died restart the twrp_service
+ LOGDECRYPT("%s is not running, resuming %s!\n", Services[i].service_name.c_str(), Services[i].twrp_svc_name.c_str());
+ Start_Service(Services[i].twrp_svc_name);
+ }
+ }
+#endif
+
+ res = run_vdc(Password);
+
+ if (res != 0) {
+ // Decryption was unsuccessful
+ LOGDECRYPT("Decryption failed\n");
+ output_dmesg_to_log = true;
+ }
+ } else {
+ LOGDECRYPT("Failed to start vold\n");
+ TWFunc::Exec_Cmd("echo \"$(getprop | grep init.svc)\" >> /dev/kmsg");
+ output_dmesg_to_log = true;
+ }
+
+ // Stop services needed for vold decrypt so /system can be unmounted
+ LOGDECRYPT("Stopping services...\n");
+ Stop_Service("sys_vold");
+#ifdef TW_CRYPTO_SYSTEM_VOLD_SERVICES
+ for (size_t i = 0; i < Services.size(); ++i) {
+ if (!Is_Service_Running(Services[i].service_name) && Services[i].resume)
+ Stop_Service(Services[i].twrp_svc_name);
+ else
+ Stop_Service(Services[i].service_name);
+ }
+#endif
+
+ if (is_firmware_symlinked)
+ Restore_Firmware_Folder();
+ if (is_vendor_symlinked)
+ Restore_Vendor_Folder();
+
+ if (!PartitionManager.UnMount_By_Path("/system", true)) {
+ // PartitionManager failed to unmount /system, this should not happen,
+ // but in case it does, do a lazy unmount
+ LOGDECRYPT("WARNING: system could not be unmounted normally!\n");
+ TWFunc::Exec_Cmd("umount -l /system");
+ }
+
+ LOGDECRYPT("Finished.\n");
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_SERVICES
+ // Restart previously running services
+ for (size_t i = 0; i < Services.size(); ++i) {
+ if (Services[i].resume)
+ Start_Service(Services[i].twrp_svc_name);
+ }
+#endif
+
+#ifdef TW_CRYPTO_SYSTEM_VOLD_DEBUG
+ if (pid_strace > 0) {
+ LOGDECRYPT_KMSG("Stopping strace_init (pid=%d)\n", pid_strace);
+ int died = 0;
+ int timeout;
+ int status;
+ pid_t retpid = waitpid(pid_strace, &status, WNOHANG);
+
+ kill(pid_strace, SIGTERM);
+ for (timeout = 5; retpid == 0 && timeout; --timeout) {
+ sleep(1);
+ retpid = waitpid(pid_strace, &status, WNOHANG);
+ }
+ if (retpid)
+ LOGDECRYPT_KMSG("strace_init terminated successfully\n");
+ else {
+ // SIGTERM didn't work, kill it instead
+ kill(pid_strace, SIGKILL);
+ for (timeout = 5; retpid == 0 && timeout; --timeout) {
+ sleep(1);
+ retpid = waitpid(pid_strace, &status, WNOHANG);
+ }
+ if (retpid)
+ LOGDECRYPT_KMSG("strace_init killed successfully\n");
+ else
+ LOGDECRYPT_KMSG("strace_init took too long to kill, may be a zombie process\n");
+ }
+ }
+ output_dmesg_to_log = true;
+#endif
+
+ // Finish up and exit
+ if (fp_kmsg) {
+ fflush(fp_kmsg);
+ fclose(fp_kmsg);
+ }
+
+ if (output_dmesg_to_log)
+ output_dmesg_to_recoverylog();
+
+ // Finally check if crypto device is up
+ if (wait_for_property("ro.crypto.fs_crypto_blkdev", 0) != "error")
+ res = 0;
+ else
+ res = -1;
+
+ return res;
+}
diff --git a/crypto/vold_decrypt/vold_decrypt.h b/crypto/vold_decrypt/vold_decrypt.h
new file mode 100644
index 000000000..70db404e9
--- /dev/null
+++ b/crypto/vold_decrypt/vold_decrypt.h
@@ -0,0 +1,26 @@
+/*
+ Copyright 2017 TeamWin
+ This file is part of TWRP/TeamWin Recovery Project.
+
+ TWRP is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ TWRP is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with TWRP. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _VOLD_DECRYPT_H
+#define _VOLD_DECRYPT_H
+
+#include <string>
+
+int vold_decrypt(std::string Password);
+
+#endif // _VOLD_DECRYPT_H