summaryrefslogtreecommitdiffstats
path: root/partitionmanager.cpp (follow)
Commit message (Collapse)AuthorAgeFilesLines
* vold_decrypt: FDE Keymaster 3.0 supportnkk712017-11-281-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * HTC U11 Oreo is using keymaster3 FDE encryption which requires the new services: 1- /system/bin/hwservicemanager 2- /vendor/bin/hw/android.hardware.keymaster@3.0-service 3- /vendor/bin/qseecomd (instead of /system/bin/qseecomd) So in addition to /vendor/lib and /vendor/lib64 also symlink /system/vendor/bin to /vendor/bin. * vold_decrypt services now have separate prefixes: 1- 'sys_' referring to /system/bin 2- 'ven_' referring to /vendor/bin * The additional (hwservicemanager, keymaster-3-0) and modified (qseecomd) .rc files have been updated in the vold_decrypt directory. Comments were added directly in the .rc files, please check them. * /etc/recovery.fstab needs to be temporarily moved since vold will use it if it finds the '/sbin/recovery' file (refer to fs_mgr for the fstab load code https://goo.gl/8KaZyf). Since fs_mgr cannot parse TWRP style fstab, we 'hide' it and attempt to create a symlink to /fstab.{ro.hardware}. Also remove shell dependencies, code cleanup, new error codes: * Critical sections of vold_decrypt should not rely on the external shell (and the available binaries) provided by TWFunc::Exec_Cmd. Doing so may lead to failures resulting from different shell provided binaries not working properly, especially since busybox can be inconsistent across different trees. In particular the following functions have been changed: * run_vdc() no longer uses daisy chained commands, instead it now forks and executes vdc directly including a 30 second built in timeout. * Symlink_Firmware_Files() no longer relies on the shell 'find' command to retrieve the list of firmware/vendor files and instead uses a built in function, Find_Firmware_Files(), which traverses the system partition to retrieve the list of files. * The code has also been cleaned up a little for better consistency, and vold_decrypt will now return various error codes for the different failures, as defined in vold_decrypt.h, which allows the gui_msg to be moved back to partitionmanager.cpp. Notes regarding pre Android 8.0 builds: * Service names in .rc files cannot exceed 16 characters (including the prepended 'sys_' or 'ven_') in Android 7.1 and below, so a service name such as 'sys_hwservicemanager' is out of the question for 7.1 and below. * hwservicemanager will check ACLs on 'hwservicemanager' and 'ITokenManager' if they are even allowed to run, otherwise the interfaces will fail. The policies have only been introduced in 8.0, and although it is possible to manually add them to the 7.1 policies it's not recommended. * Therefore the best course of action is to build in 8.0. * SIDE NOTE: On the HTC U11 we are actually using omni-7.1 with some changes in the device tree to support both Nougat and Oreo decryption, please refer to: 1- https://gerrit.twrp.me/c/2756/ for the necessary sepolicy and BoardConfig changes. 2- The Android.mk file for vold_decrypt was modified to truncate greater than 16 character service names (as mentioned therein) Other changes: * TW_CRYPTO_SYSTEM_VOLD_DISABLE_TIMEOUT is now deprecated due to built- in fork and timeout. * Output_dmesg_to_recovery_log() is also deprecated so upon a failed decryption the recovery.log will no longer append it, instead you can just use 'adb shell dmesg' to check it. Nonetheless if a true debug build is needed use the original TW_CRYPTO_SYSTEM_VOLD_DEBUG flag as outlined in the original commit message (see below). Usage info: This is an update to the initial vold_decrypt, for more info refer to https://github.com/omnirom/android_bootable_recovery/commit/71c6c50d0da1f32dd18a749797e88de2358c5ba1 Change-Id: Id7129d125ae7f5dcba0779489825add718022ba3
* FBE for Pixel 2Ethan Yonker2017-11-281-2/+4
| | | | | | | | | | | | Includes various minor fixes for building in Android 8 trees with r23+ tag Update FBE extended header in libtar to version 2 and include the entire ext4_encryption_policy structure now after translating the policy. See this post for more details: https://plus.google.com/u/1/+DeesTroy/posts/i33ygUi7tiu Change-Id: I2af981e51f459b17fcd895fb8c2d3f6c8200e24b
* Support v2 fstab formatEthan Yonker2017-11-281-19/+344
| | | | | | | | | | | | | | | | | | | | | | Auto detect and support both the v1 and v2 fstab formats Support putting TWRP style flags in a separate /etc/twrp.flags file twrp.flags format is the same as twrp.fstab (v1 with TWRP flags) Support using a wildcard in a block device and find all partitions: /usb-otg vfat /dev/block/sda* Support using sysfs entries (voldmanaged) and read uevents and scan for wildcard partitions from uevent data. (twvold?) May not be complete for some of the newer flags found in fstabs in newer build trees and there is a slim chance of a crash if the user removes a removable device while TWRP is performing actions. May need to add some kind of mutex to prevent the 2 threads from causing this crash. We need to start somewhere though and this change is pretty innocuous when not using a v2 fstab. Change-Id: I617d97c7db332cbe671a9d2b8ad98b3d9c4f03cc
* ADB Backup: add ability for TWRP GUI to restorebigbiff bigbiff2017-11-271-82/+109
| | | | | | | | | Restore adb backup files that TWRP made to your PC. Put files in your backup directory to see them. e.g. /sdcard/TWRP/BACKUPS/<sn> Change-Id: I2c57970d77b64c39a302159041456e761c185259
* Fix 'No OS' on System_Image restore after wipenkk712017-11-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | * When you format the system partition, it will remain in a mounted state. * Subsequently restoring a system_image (even though successfully) the Update_System_Details() function will not correctly update the system partition details. * Reproducible by: 1- Advanced wipe: System 2- Restore: System_Image 3- Reboot -> No OS prompt * eg: [ ~ # twrp get tw_min_system tw_min_system = 50 ~ # twrp get tw_backup_system_size tw_backup_system_size = 8 ~ # mount -o ro /system ~ # du -sh /system 3.5G /system ] Change-Id: I99f75274816788dd38eccdd387f7ac691e1f3fab
* backup: fix return handling when no digest is being createdEthan Yonker2017-07-061-22/+14
| | | | | | | | If the user selects to skip digest creation, Backup_Partition always returned false. This patch fixes this problem and somewhat cleans up the error handling. Change-Id: I1db0e285cd5ed2bd93756cd27c6f56b8415ffa86
* twrpDigest refactorbigbiff bigbiff2017-06-171-83/+42
| | | | | | | | | | | | | | | | | | | This patch is to refactor twrpDigest using polymorphism and inheritance to use the same call patterns for creating and reading a digest. Now a library. Use SHA2 from libcrypto. SHA2 is default if device has libcrypto. Change string MD5 everywhere to use digest or Digest instead. Updated string tags to digest. Translation will be required. Switch out digest code into a driver class from partitionmanager. SHA2 is better for digest creation due to decreased collision space compared to MD5 and SHA1. See https://en.wikipedia.org/wiki/SHA-2 Change-Id: I74b5546789990b12aa4ce2e389d25f80a3fe213f
* Improve decrypted partition loggingnkk712017-06-041-3/+4
| | | | | | | | | * Partition information should be updated after successful decryption (both userdata and adopted) and then logged * Fix adopted storage nickname being "" Change-Id: Idcdab84f339e932e62880089bad36e206920dd70
* ADB Backup: fix adb restore issuesbigbiff bigbiff2017-04-231-0/+4
| | | | | | | | | | | Set Backup_FileName on adb backup to fix restore. Set read_from_adb after EOF to return properly from newer adb client prompt. Create setter and getter for Backup_FileName for openrecoveryscript.cpp which is not a friend class. Fix condition for twrpTar::Get_Size() and adb backup. Change-Id: I7eb8168fa3416366b996e220cecbc0e1bcec5e8e
* crypto: Use system's vold for decryptionnkk712017-03-061-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If TWRP crypto fails to decrypt partition, mount the system partition and use system's own vold to attempt decryption. This provides a fallback for proprietary OEM encryption as well as encryption methods which TWRP hasn't been updated for. Requirements in device tree: * fstab.{ro.hardware} in device/recovery/root The fstab does not need to be complete, but it does need the data partition and the encryption entries. * 'TW_CRYPTO_USE_SYSTEM_VOLD := true' in BoardConfig or * 'TW_CRYPTO_USE_SYSTEM_VOLD := <list of services>' Notes: * Setting the flag to 'true' will just use system's vdc+vold or * Setting the flag with additional services, will also start them prior to attempting vdc+vold decryption, eg: for qualcomm based devices you usually need 'TW_CRYPTO_USE_SYSTEM_VOLD := qseecomd' * For each service listed an additional import will be automatically added to the vold_decrypt.rc file in the form of init.recovery.vold_decrypt.{service}.rc You will need to add any not already existing .rc files in your device/recovery/root folder. * The service names specified in the vold_decrypt.{service}.rc files have to be named 'sys_{service}' eg: 'service sys_qseecomd /system/bin/qseecomd' * Any service already existing in TWRP as {service} or sbin{service} will be stopped and restarted as needed. * You can override the default init.recovery.vold_decrypt.rc file(s) by placing same named ones in your device/recovery/root folder. If you do, you'll need to manually add the needed imports. * If /vendor and /firmware folders are temporarily moved and symlinked to the folders and files in the system partition, the properties 'vold_decrypt.symlinked_vendor' and 'vold_decrypt.symlinked_firmware' will be set to 1. This allows for additional control in the .rc files for any extra actions (symlinks, cp files, etc) that may be needed for decryption by using: on property:vold_decrypt.symlinked_vendor=1 and/or on property:vold_decrypt.symlinked_firmware=1 triggers. Debug mode: 'TW_CRYPTO_SYSTEM_VOLD_DEBUG := true' in BoardConfig * Specifying this flag, will enable strace on init and vdc, which will create separate log files in /tmp for every process created, allowing for detailed analysis of which services and files are being accessed. * Note that enabling strace will expose the password in the logs!! * You need to manually add strace to your build. Thanks to @Captain_Throwback for co-authoring and testing. Tested successfully on HTC devices: M8 (KK through MM), M9 (MM and N), A9 (N), 10 (N), Bolt (N), Desire 626s (MM), U Ultra (N) HTC One X9 (MTK device) And by Nikolay Jeliazkov on: Xiaomi Mi Max Change-Id: I4d22ab55baf6a2a50adde2e4c1c510c142714227
* Timeout for decryptEthan Yonker2017-03-011-3/+20
| | | | | | | | | | | | | | | | Sometimes, usually because of proprietary binaries related to keymaster, decrypt will hang waiting for the keymaster to initialize forever. This patch enables a timeout so that we don't get stuck trying to decrypt forever. A timeout is especially important when dealing with the default password because the user has no option to cancel when TWRP tries to decrypt. NOTE: This patch only adds a timeout for FDE. FBE will require some special handling because we need access to some static data and that data is not available across a fork. Special thanks to nkk71 for cleaning up some issues in my patch set. Change-Id: Iccf2fe769ac27a7dcd6bfebfe7d2e9eddd034308
* Tweak MTP startup routineMatt Mower2017-02-241-3/+1
| | | | | | | | | * As a precaution, (non-permanently) disable MTP if TWRP crashes. * Remove a duplicate logging of 'Starting MTP'. * Combine and improve readability of conditions before MTP starts. * Remove unnecessary Disable_MTP() call if conditions unsatisfied. Change-Id: I61ac772fc123da5b84c3061fbcf2116531bc4e2f
* Fix handling of USB config during MTP switchingMatt Mower2017-02-241-4/+4
| | | | | | | | | | | | | | | | | | The property set of sys.usb.config was not part of the original 'Only change USB mode to mtp when ready for MTP' commit. Further, it adds an additional USB off/on toggle to the MTP startup routine, potentially confusing the host computer. The default init.recovery.usb.rc already sets the usb functions to 'adb' during 'on fs'. It is possible that devices could run into issues with MTP startup due to sys.usb.config not yet being set. This is actually due to a poor design decision in Enable_MTP(), where sys.usb.config would not be configured for mtp if sys.usb.config had never been set. It is not necessary to check for a previous value, just set it. Fix the USB PID for adb-only mode in Disable_MTP(). Change-Id: I21b5e64c9bdcd3104372a8b4eb8ea50cf4561892
* Partition: Remove unused has_data_media variableMatt Mower2017-02-161-2/+0
| | | | Change-Id: Ic1a3aa2b57db5539ce6f6740a63bfe6d33890d70
* Improve backup display names with emulated storageEthan Yonker2017-02-081-4/+22
| | | | | | | | | | | | | -Change backup display name to say that we are excluding storage -Add warning message during backup of any partition with data media -Also eliminate unused variable from twrpTar class Maybe this will make the people in issue 276 happy, but probably not because they already lost their data, or because the warning text is yellow instead of red. https://github.com/TeamWin/Team-Win-Recovery-Project/issues/276 Change-Id: I98303fe7f6b7a25fea029637c90145258d41ee46
* Restore TW_BACKUP_AVG_IMG_RATE handlingMatt Mower2017-01-181-0/+1
| | | | | | | Preserving the average BPS across partitions appears to have been wiped out by the adb backup patch set. Restore it. Change-Id: Id05c12ff61260b642ee7acd979132a2cba026d87
* SELinux can be assumed for Android 4.4+Matt Mower2017-01-181-5/+0
| | | | Change-Id: I7410a0c8e439eec90a955ee9201efd9a92bb9635
* Do not disable performance mode too early for backupMatt Mower2017-01-181-2/+2
| | | | | | | Include SetPerformanceMode(false) just before every "return", and not sooner. Change-Id: Iefd5546865347dbd08cc9baeb98d58d26b7f4a3b
* Unused variable cleanupMatt Mower2017-01-181-12/+8
| | | | Change-Id: I2397d0bd221dcf5c9d0f971ba157519bcf014a70
* Very minor code cleanupMatt Mower2017-01-181-4/+2
| | | | Change-Id: Ie0b97da2cce7bb93307ed49b1138bc2f36df34d0
* Whitespace cleanupMatt Mower2017-01-181-7/+3
| | | | Change-Id: I93c65973679894bb8587da4b38b410d38036b8bd
* Change handling of /cache due to AB devices not having cacheEthan Yonker2016-12-131-13/+13
| | | | Change-Id: Ia9b97ed19eb3d400d9d399255108cac79361bca4
* Support File Based EncryptionEthan Yonker2016-12-131-32/+73
| | | | Change-Id: Ib688ddd0c32d3999590cacd86b6d9b18eac336e9
* Add boot slot supportEthan Yonker2016-12-131-1/+63
| | | | Change-Id: I7eaf80e327985f53791f90fbdebad022a9650d31
* Improve backup & wipe exclusion handlingEthan Yonker2016-11-301-4/+5
| | | | | | | | | | | | | | Rename twrpDU.* to exclude.* Remove global variable for du and replace with partition specific variables. Use separate exclusion lists for backups and wiping. Clean up some includes Fix some parenthesis in twrp.cpp that I messed up. Note: twrpTarMain command line utility compiles but probably does not work correctly yet due to not properly setting part_settings Change-Id: Idec9c3e6a8782ba53f3420fa79ba33394f4f85fb
* Fix image flashingEthan Yonker2016-11-301-9/+18
| | | | | | | | | | PS2: full_filename is not a dir PS3: use a consistent format of always assuming directory is missing the trailing / + fix whitespace alignment Change-Id: Ib963473ae10571b3d069b326d024ca04c7224dda (cherry picked from commit fa4ff144374474c541351d153549ad11d4396614)
* Clean up PartitionSettingsEthan Yonker2016-09-131-25/+20
| | | | | | | | | | | | The PartitionSettings struct contains some data elements that are duplicates of data elements in the TWPartition class that is contained within the PartitionsSettings.Part element. We will eliminate this duplication to help reduce the chances for programming bugs. Specifically, this fixes problems where the current file system does not match the backed up file system. Change-Id: I02f236e72093362050556a2e53a09d1dbb9a269d
* Fix restore of subpartitionsEthan Yonker2016-09-021-1/+2
| | | | Change-Id: If76cd08cdac7e2af4e0f5f00d420eed1f30897d3
* MD5 checking: fix issues introduced with adb backup patchsetbigbiff bigbiff2016-08-311-13/+22
| | | | | | | This patchset will fix issues with creating and checking md5 checksums with single partitions and subpartitions. Change-Id: Iddfaf46412e95635af958094726cf9e3eb5a4cc8
* Finish creating disable_free_space_check variableMatt Mower2016-08-191-1/+1
| | | | | | | | | | * Create data manager variable for 'tw_disable_free_space' * Make configurable through Settings * Fix the "two presses needed to enable" issue for the checkbox on the backup screen * No need to capitalize every word, but do specify precedes backup Change-Id: Id436cef13e4ca9349618420aac03862ec4e3c35e
* Allow running of a custom script after factory resetEthan Yonker2016-08-191-0/+1
| | | | Change-Id: I33e6d72bf93103052551f33da51ba4af9a5f88c9
* Fix md5 creation from adb backup patch.bigbiff bigbiff2016-08-091-8/+8
| | | | Change-Id: Id90da89c4eb50ed695a88f29859d1276ed8d032b
* Add typecode to sgdisk for proper detection in AndroidCaptain Throwback2016-08-041-1/+1
| | | | | | | | | | | | - Fixes the "Unsupported SD Card" error when partitioning w/TWRP PS2: Use hex code instead of GUID to make code more succinct Update typecode for Linux swap to be consistent PS3: Revert PS2 changes Change-Id: I5aec780aa4dfb7bd9025ae8cbceda13bfaaa0b03
* ADB: Add adb backup for TWRP.bigbiff2016-08-011-104/+178
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Functionality for client side to backup tar and image streams over adbd to the client under backup.ab. Using adb backup on the client side you can backup the partitions TWRP knows about. On the client side you can do the following: adb backup -f <filename> --twrp <options> where options are --compress: compress data system: backup system cache: backup cache data: backup data boot: backup boot etc for each partition. You can string multiple options, i.e. adb backup -f <filename> --twrp --compress cache system data adb backup in TWRP will take any option corresponding to TWRP fstab partitions, e.g. efs boot as well. If you do not specify the filename with the -f option, adb will backup your data to a filename backup.ab on the client. You can then rename the file and encrypt it with desktop tools. If you don't want to use command line arguments: adb backup --twrp will bring up the gui and allow you to choose partitions from the backup page. To restore the backup use the following convention: adb restore <filename> Structures are used to store metadata in binary inside of the file itself. If the metadata structure is modified, update the adb version so that it will invalidate older backups and not cause issues on restore. When restoring, we currently do not support picking specific partitions. It's all or nothing. Change-Id: Idb92c37fc9801dc8d89ed2a4570e9d12e76facf8
* Wait to mount until after fstab processedMatt Mower2016-05-031-18/+23
| | | | | | | | The necessity to process fstab twice stems from mounting partitions while still processing. Instead, wait to finish setup of /data, /cache and storage parameters until after fstab has been processed (once). Change-Id: Id77e1edbab5eb68a7cd4a1f34953d819a043d47a
* Remove char/string conversions in fstab processingMatt Mower2016-05-031-4/+4
| | | | | | | | There a few char->string conversions between functions which handle different parts of fstab line processing, but there are no uses of string functions. Pass char arrays/pointers around instead. Change-Id: I976a9a54ee8dcfb6194cadcac6a34e467602003b
* Rewrite FS fstab flag processingMatt Mower2016-05-031-1/+1
| | | | | | | | | | * If 'ro' fsflag detected, set Mount_Read_Only = true * Only output human readable Mount_Options to log * Match fsflags identically (not just first n chars) since there are no fs_flags which take arguments * Match new processing method introduced in TW fstab flag processing Change-Id: Iefdb76016be90a131b0d627d0cd3f18d2eb1a008
* Really remove all old SP* flags and codeEthan Yonker2016-04-021-36/+0
| | | | Change-Id: I5ece02a8721e1b7541fb5182366a55fd0f037a7a
* Improve progress bar handling for backup / restore / image flashEthan Yonker2016-03-311-34/+22
| | | | | | | | | | | | | | | | | The progress bar will now be updated during image backups, restores and during image flashing (except for sparse images which will require significant changes to libsparse, and except for mtd nand using flash_utils). The progress bar will now be updated mid-file for file systems (tar) so the user will see changes even during large file backup / restore. Add a new progress tracking class to simplify handling of progress bar updates. The class will only update the progress bar 5 times a second to reduce the CPU load from updating the GUI frequently which does affect backup times. Change-Id: Iff382faef3df1f86604af336c1a8ce8993cd12c5
* DataManager UpdatesEthan Yonker2016-03-311-1/+0
| | | | | | | The goal of this change is to make DataManager use InfoManager to reduce code duplication. Change-Id: Ia4f4c4324453a192995e0f442db0a03628c13e46
* Don't add subpartitions to restore listJames Christopher Adduono2016-03-031-1/+2
| | | | | | | | | | Their parents will take care of them. Good parents. Fixes double restoration of subpartitions when they are also set to backup in the recovery fstab. Change-Id: I876c179135e0cb00754e9a8cfc8eac164c4b7fd4
* partitions: Fix path based Find_Next_StorageMatt Mower2016-02-241-1/+1
| | | | | | | | | | | If a path is specified for Find_Next_Storage() and datamedia is excluded, the function currently runs to the end of available partitions and reports no other storage is available. Fix this by restoring the original mount_point == search_path check to break the loop. The subsequent partitions loop will skip data-media storage as needed. Change-Id: I92baed866cd36f13d851bd58ba5346e47edb142e
* Fix adopted storage when andsec flag is presentEthan Yonker2016-02-181-0/+13
| | | | Change-Id: If903d838abc920f952f243482338188c15bb1dbf
* partitions: Avoid duplicate UMS mountsMatt Mower2016-02-051-1/+1
| | | | | | | | If a device has several LUN but only one storage volume TWRP recognizes (e.g. lun0 for microsd and lun1 for emulated cdrom), then avoid mounting the same partition twice by checking the mount point. Change-Id: Ie23b88acca1818873792e9f65b73b125a15e4a5d
* gui: add german translationz31s1g2016-02-051-1/+1
| | | | | | | | | | | | | | also correct typo in all language files also remove dummy language files for ES and FI german translation was done on omni crowdin by multiple translators: https://crowdin.com/project/OmniROM/de# result was updated in line with latest changes (as of 02032016) to en.xml Change-Id: Iddd8dbee7e050833a4dc61174288514d408267f7 Signed-off-by: z31s1g <z31s1g@googlemail.com>
* Replace fix permissions with fix contexts for emulated storageEthan Yonker2016-01-291-17/+16
| | | | | | | | | | Fix permissions rarely fixed anything on more recent versions of Android and usually made things worse. Instead we will replace it with a more dumbed down option that should fix contexts on /data/media with a few improvements to ensure that contexts get fixed for multiple users and on adopted storage. Change-Id: If5523781936a0b04196e2ad871cae767ebae2583
* Adopted Storage supportEthan Yonker2016-01-251-12/+120
| | | | | | | | | | | | | | | | | | | | | -Detects, decrypts, and mounts an adopted SD card if a secondary block device is defined (usually mmcblk1) -Handles unified storage -Displays the adopted storage in MTP along with internal -Factory Reset - wiped just like a data media device, we retain the keys folder and the storage.xml during a factory reset -Backup / Restore -Disable mass storage when adopted storage is present -Read storage nickname from storage.xml and apply it to display names in the GUI -Read storage.xml and determine what storage location is in use for /sdcard and remap accordingly libgpt_twrp is source code mostly kanged from an efimanager project. It is GPL v2 or higher, so we will opt for GPL v3. Change-Id: Ieda0030bec5155ba8d2b9167dc0016cebbf39d55
* Fix (Auto Generate) handling for backup namesEthan Yonker2016-01-221-3/+3
| | | | Change-Id: I29f3823d03c005fb55a0e0a98818d40bd1eb039d
* Fix a bunch of messagesMatt Mower2016-01-221-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * Find and rename/remove duplicate string variable names * Add missing string variables to en language file * Fix display of some strings missing @ in front of variable name * Fix several %s --> {1} * Be consistent in usage of cancelled vs. canceled (both spellings acceptable) Tip for finding strings missing from language files: 1) Find all messages: egrep -hr "gui_msg.+=" > /tmp/msgs.txt 2) Regex replace to trim them down WHAT: ^\s+gui_msg(?:[^"]+)"([a-zA-Z0-9_]+)=([^"]+).+ WITH: $1 Note that $2 can be used to retain the message 3) Find missing strings: for i in $(cat /tmp/msgs.txt); do if ! grep -q $i gui/theme/common/languages/en.xml; then echo $i; fi done Change-Id: Ic193162e4b5468bf027472928a370be39840ea1d
* Improve flash image handling of mountingEthan Yonker2016-01-181-2/+9
| | | | | | Flashing an image does not always require storage to be mounted. Change-Id: I9d2a69cee9053f7829e51486d727e2e0b522c5da
* Improve sdcard partitioning processEthan Yonker2016-01-141-75/+90
| | | | | | | | | | | | | | | | | -Improve code for partitioning sdcards -Allow user to select a device for partitioning (must be removable) -Use sgdisk to partition sdcards -Set default sizes for ext and swap to 0 -Change increments for ext to 256MB and swap to 64MB Note: sgdisk is included in 6.0. I have included a static prebuilt sgdisk for trees that do not have sgdisk, however the prebuilt sgdisk is a decent bit larger than the old parted binary. The old parted binary is quite old at this point and we only have it for armv7a. sgdisk should be maintained by AOSP and can be built from source so it should work across architectures. Change-Id: Ib80882d9b5776e5e9358b11340fba392e6f1ae09
* Generate new format /etc/fstabdianlujitao2016-01-041-1/+1
| | | | | | | | * Toybox's mount can't work with the old-fashioned fstab. * Busybox mount is compatible with the new one. Change-Id: I16b7d6424a4424c2a92d82846a706733bf58f8e1 Signed-off-by: dianlujitao <dianlujitao@gmail.com>
* Remove dead code: TW_HAS_DUAL_STORAGEMatt Mower2015-12-221-28/+2
| | | | | | Nothing sets TW_HAS_DUAL_STORAGE. Remove this dead code. Change-Id: Id5d10c9ee3883dad6beef69e09d16b0f1350c91d
* Fix gui_msg %s to {1} callEthan Yonker2015-12-211-1/+1
| | | | Change-Id: I39f032e0cad5d482d11e0e8d1c4c7c3e7ec6d041
* Multiple Language SupportEthan Yonker2015-12-191-104/+153
| | | | | | | | | | | | | | | | | | | | | | | This is similar to https://gerrit.omnirom.org/#/c/14014 A lot of the features built in the older patch set have been split out into separate patches, most of which have already been merged. The remaining functionality here should all be directly related to language selection and loading. We always load English as a base before loading other languages over the top of the base. The idea is that if another language is missing a translation, then we will still display the English. Maybe still to do: read the /cache/recovery/last_locale file and load a language based on that. For me, this file contains just: en_US We probably won't bother with region specific translations so we would have to look at either trimming off the _US or using some other method like perhaps a symlink or a combination of the two. Thanks to _that for twmsg.cpp class Change-Id: I9647a22e47883a3ddd2de1da51f64aab7c328f74
* Minor update to decrypt device routine for Nexus 6P decryptEthan Yonker2015-11-051-3/+8
| | | | | | | | | | Move property setting of ro.crypto.state to after mounting any needed partitions so that we can use this property as a trigger for running services in init. Check to see if the property is already set so that we do not set it and sleep multiple times if the user enters an incorrect password. Change-Id: I55558c5e227377381101b6305569d9eb31040790
* Properly set sys.usb.config when ums is enabled.HandyMenny2015-10-151-0/+2
| | | | | | | | Use sys.usb.config also for ums, but leave sys.storage.ums.enabled for compatibility with custom init.rc that use it. PS2: Rebased - moved updates to init.recovery.usb.rc Change-Id: Iad3441d23ac37612e58f63e4038d05c5c1a37b25
* Merge up to AOSP marshmallow-releaseEthan Yonker2015-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to maintain compatibility with older trees, we now have minadbd.old and minui.old. I had to use a TARGET_GLOBAL_CFLAG to handle ifdef issues in minui/minui.d because healthd includes minui/minui.h and there was no other alternative to make minui.h compatible with older trees without having to modify healthd rules which is outside of TWRP. Note that the new minui does not currently have support for qcom overlay graphics. Support for this graphics mode will likely be added in a later patch set. If you are building in a 6.0 tree and have a device that needs qcom overlay graphics, be warned, as off mode charging may not work properly. A dead battery in this case could potentially brick your device if it is unable to charge as healthd handles charging duties. Update rules for building toolbox and add rules for making toybox Use permissive.sh in init.rc which will follow symlinks so we do not have to worry about what binary is supplying the setenforce functionality (toolbox, toybox, or busybox). Fix a few warnings in the main recovery binary source code. Fix a few includes that were missing that prevented compiling in 6.0 Change-Id: Ia67aa2107d260883da5e365475a19bea538e8b97
* Fix up some TW_OEM_BUILD thingsEthan Yonker2015-08-261-2/+11
| | | | | | | | | Fix factory reset now properly formats data as expected Change text for ORS processing Disable system read only check, SuperSU, and patch system Stop copying fstab and version to cache Change-Id: I20f5cae390afbb8d2d88e01b8d9b9bf4ff0fdea1
* partition: recreate tw_internal_path(/data/media/0), after wipe media from data or format /data.xiaolu2015-06-171-10/+1
| | | | Change-Id: I3671d7a5759260a4e74952168483a6816eb28f5d
* Add resize2fs and ability to run resize2fs via GUIEthan Yonker2015-05-281-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | Note: Only works on ext2/3/4 partitions. Only tested on ext4. We can use this in some cases to resize the data partition if an incorrect fstab caused recovery to not reserve the 16KB for a crypto footer. Sometimes the BoardConfig for a custom ROM does not have the correct size for the system partition and if the ROM flashes a raw system image, that image will not take up the full block device. Running resize2fs can fix the size and may allow more room in the system partition for customizations like busybox or a larger gapps package. Sometimes flashing a factory image may flash userdata with an image with a file system that does not take up the full size of the block device (e.g. factory images for the Nexus 6 will flash userdata with a ~24GB userdata image, wasting ~30GB of space). Using resize2fs we can easily fix this issue without having to do a full format data. Change-Id: I631f5c6f567bbc6a9241e5dd95f1e435820a1b13
* Mount system as read-only by defaultEthan Yonker2015-05-271-1/+5
| | | | | | | | | | | | | | Mounting system as rw can prevent future OTA updates. The purpose of this patch set is to prevent TWRP from mounting sytem as rw on the first boot. Device maintainers should update their twrp.fstab files on these devices to include an additional line: /system_image emmc /dev/block/../system This line will allow TWRP to create a raw system image backup to ensure that the user can return to an original state for future OTA updates. Change-Id: I8929d85bc3a5b96cc564bc7f734b58d5612ec833
* partitionmanager: remove broken and unused progress calculation codethat2015-05-191-28/+3
| | | | | | | | | img_bps and file_bps were uninitialized (the values are only calculated at the end of the backup), and occasionally could be 0. Don't divide by zero, it's bad for the program's health. Change-Id: I3f6f5a144c24f32508ca25de49491261c7f6e674
* Address a few compiler warningsMatt Mower2015-03-051-2/+2
| | | | Change-Id: I6e063fba8d58c8c53da6bca6292c84e3392aee50
* Theme: Add ability to disable size checking before backupbigbiff2015-02-231-5/+46
| | | | | | | | | | (for compressed backup users with low space). Clean up backup folder and copy only recovery.log for debugging. Conflicts: gui/devices/watch/res/watch.xml Change-Id: If8aa3580dbc082d0fe4882d4af8dc3cdb362a8b5
* MTP: make MTP work even if unplugged and repluggedEthan Yonker2015-02-021-24/+26
| | | | | | | | Set up a loop to keep trying to open / read the MTP device so that MTP will work even if the device is unplugged during boot or unplugged and replugged in. Change-Id: I0d3a3b7c91ce84a8cbed16caa4b15efee35b3641
* Add cancel backup capability.bigbiff2015-01-271-3/+33
| | | | | | | | | | | This will stop the iteration of the partition objects, kill the current twrpTar thread and remove the backup directory. Implement TWAtomicInt class to give us a wrapper that automatically uses mutexes before the read and write to help ensure that the reads and writes will be atomic based on documentation. Change-Id: I645b22bc980a292e9c7202acb24ffd22ebe68c63
* Hide some non critical error messagesEthan Yonker2015-01-221-8/+8
| | | | Change-Id: I6e43242e44ce63cea9472c75a9f7fedf1b34fbbe
* Allow flashing of images via the GUIEthan Yonker2015-01-091-0/+63
| | | | | | | | | | | - Use the Images... button in the lower right of the zip install page - Unify image flashing functions between restore and image flash - boot and recovery partitions are flashable by default - use fstab flag flashimg=1 or 0 to override defaults - file system partitions are currently not flashable Change-Id: I822dc446030543c55d2153e219d67a1292374ffc
* Do not toggle USB ID during MTP startup if not neededEthan Yonker2015-01-021-24/+31
| | | | | | | | In most cases MTP is enabled so it is better to start our init.rc with MTP enabled and try not to toggle USB IDs during TWRP boot so that we can keep adb running to make debugging easier. Change-Id: Idf122c5ad4deeef7e1ed775d495989c502ddfb19
* Move sleep during MTP startup to MTP threadEthan Yonker2014-12-291-1/+0
| | | | | | | | | | Some devices are very slow to respond to the sysfs requests. To prevent delaying the main GUI from booting during TWRP startup, we move the sleep delay to just before we open the MTP device and into the MTP thread so that it does not hold up the main TWRP thread. Change-Id: Ic931ef317d0fb7ef4dfdef46a32f68a014ff62c0
* Check for valid MTP_Storage_ID before adding or removingEthan Yonker2014-12-291-0/+2
| | | | | | Attempting to add a storage ID of 0 was causing a seg fault. Change-Id: If8797186405be36ee70dbca63bd1063a62ba2812
* Fix else if and maxFileSize initializer.bigbiff2014-12-221-1/+1
| | | | Change-Id: Iac7852a4fb2add5744d5ea424d6ad5a82828f102
* fixPermissions: simplify code, fix bugsthat2014-12-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | - avoid parsing permission strings - fix memory leaks, a fix new/free mismatch and a compiler warning - fix that only first updated-package was processed - fix a potential stack overflow if packages.xml is huge - minor refactoring for reducing duplicated code - don't process packages without codePath - fix path for deleting app data (currently unused anyway) - fix file ownership on libs - try not to mess up Android 5.0 app permissions Patch set 4 - make fixing SELinux contexts an option with a check box - add some notes / text to the themes Patch set 6 - decouple "fix permissions" from "fix contexts" Change-Id: Icc77ecc581befc5ce6e419b1f3b8ca189208c234
* MTP add/remove storage instead of disabling MTPEthan Yonker2014-12-191-15/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a pipe between TWRP and MTP to allow TWRP to tell MTP to remove storage partitions as they become unavailable (e.g. during a wipe, unmount, etc) instead of disabling MTP completely. This includes some fixes and improvements in destructors to properly remove / delete various items. This also means that we will not be toggling adb off and on quite as often. I do not like that we had to add another thread, but we were unable to use select() on the mtp_usb character device because this device does not support polling. Select always returned indicating that the mtp file descriptor was ready to be read and the resulting read would block. The read block prevented us from being able to include reading of the pipe between TWRP and MTP in the main MTP thread. We might want to add a return pipe letting TWRP know if the removal of the storage device was successful, but I am not sure how we want to implement this. It would invovle timeouts in both TWRP and MTP to ensure that we returned a failure indicator in a timely manner to TWRP and prevent deleting the storage device in the case of a failure. Right now we make no attempt to ensure that an MTP operation is underway like a large file transfer, but we were not doing anything like this in the past. In some respects we have limited control over what happens. If the user installs a zip that unmounts a storage partition, we will not know about the change in storage status anyway. Regular Android does not have these troubles because partitions rarely get unmounted like in recovery. At some point, we have to hold the user accountable for performing actions that may remove a storage partition while they are using MTP anyway. Ideally we do not want to toggle the USB IDs and thus toggle adb off and on during early boot, but I am not sure what the best way to handle that at this time. Change-Id: I9343e5396bf6023d3b994de1bf01ed91d129bc14
* Attempt to set the proper uid/gid/contexts on new files and dirsEthan Yonker2014-12-121-0/+2
| | | | | | | | | | Files and folders that we create during backups, copy log, or MTP operations often do not have the proper uid/gid/contexts assigned. We will attempt to read the proper contexts from the settings storage path and assign those same contexts to any files or dirs that we create. Change-Id: I769f9479854122b49b499de2175e6e2d026f8afd
* Revert "Fix USB Mass Storage on some devices"Matt Mower2014-12-121-3/+1
| | | | | | This reverts commit 9eb1cd47520498e181a2d9fb2f3b464ae5327bd8. Change-Id: I66d3d6bb5633e6df3e8f7db250fc6d62817a5489
* This fixes kernel panic on find7 when disabling MTP before flashing zips.bigbiff2014-12-121-0/+1
| | | | Change-Id: Id11a0fb1a88424d9dd70190c313781607bad3bb8
* Fix occasional MTP kernel panicEthan Yonker2014-12-101-0/+1
| | | | | | | | Add a short sleep between setting up the sysfs entries for MTP and actually sending MTP data to the MTP device. In some cases a kernel panic was happening because we were sending data too soon. Change-Id: Ie5e05690846fc84f161c91829de448bc049f87e2
* add function to partition.cpp to return max file size to mtp responderbigbiff2014-12-041-1/+1
| | | | Change-Id: If8114b5eac741db6c512fb35cb48e3825c2ff098
* Reduce libs needed for decrypt and clean up old decypt filesEthan Yonker2014-12-041-85/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | Trim cryptfs.c to remove functions that TWRP does not use for decrypt and remove the need for libfs_mgr from cryptfs.c by passing some items to cryptfs.c from the partition manager. Add support for new fstab flags: encryptable and forceencrypt=/path/to/cryptokey For example: flags=forceencrypt=/dev/block/platform/sdhci-tegra.3/by-name/MD1 Note that "footer" is the default, so you do not need to set this flag on devices that use the footer for the crypto key. Also add mounttodecrypt if you need to mount a partition during the decrypt cycle for firmware of proprietary libs. Clean up decrypt and only support one version Android 5.0 lollipop decrypt should be backwards compatible with older versions so we will only support one version, 1.3 that came with 5.0 lollipop. Remove support for Samsung TouchWiz decrypt. It does not work with the latest versions of Samsung encryption anyway and it has not been updated to work with any AOSP decryption higher than 1.1 Change-Id: I2d9c6e31df50268c91ee642c2fa090f901d9d5c9
* Properly set tw_settings_path after decrypt on data media devicesEthan Yonker2014-11-201-0/+1
| | | | | | | | When tw_settings_path is not set correctly for /data/media/0 when present, custom themes will not load (and who knows what else may also be broken) so set it properly after decrypting the device. Change-Id: Id3dff04f62cf9c953c8a2ca07fe9ac597dcda20f
* Add /firmware to the mount list for L decryptEthan Yonker2014-11-191-0/+1
| | | | | | Needed by Nexus 6 and possibly others Change-Id: I3309e2141a21a94dce90e34cced16450b591a92c
* Tweak 5.0 L decryptEthan Yonker2014-11-181-0/+21
| | | | | | | | | Mount the vendor partition if it exists so we can use any proprietary files we may need. Relocate auto decrypt when default_password is in use to after all partitions are added so that we can mount the vendor partition. Change-Id: I93455a35695779f53ef57a82d3d45c7216c13639
* Add lollipop decrypt supportEthan Yonker2014-11-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Kang in cryptfs.c and cryptfs.h from vold. Use TW_INCLUDE_L_CRYPTO := true to enable. Ramdisk must contain the normal fstab file in the root in the usual format of: fstab.{ro.hardware} For examble for Nexus 5: fstab.hammerhead Or on many Qualcomm devices: fstab.qcom Tested against Android 5.0 lollipop on Nexus 7 2012 grouper. Not sure if or how this will work when we are dealing with a device with a hardware keystore. Long term we need to add a GUI element to allow entering a pattern. For now you can decrypt a pattern unlock by converting the dots to numbers in the following format: 123 456 789 So an upper-case L would translate to 14789 as a password entered on the keyboard. Change-Id: I02c29e1f1c2eb29bf002c9fe0fc118357300b5b3
* Fix USB Mass Storage on some devicesEthan Yonker2014-11-041-1/+3
| | | | | | | | On some devices we need to set the sys.storage.ums_enabled property before we write to the lun file. Also sleep for a bit after setting the propery before writing to the lun file. Change-Id: I77ac853fde14ffc3adf20571c132f91ed85196df
* add "done" after "Updating partition details..."that2014-11-041-0/+1
| | | | | | | | | | | This addresses a usability problem. Some users are confused when they switch to the console and see this message, thinking they have to wait. Examples: http://forum.xda-developers.com/showthread.php?t=2498492 http://androidforums.com/verizon-galaxy-s3-all-things-root/718376-twrp-recovery-update-question.html Change-Id: Ib44773998c2ef1b8b821f3b8876218e11a7de357
* partitionmanager: remove unused By_Block and By_Name methodsthat2014-11-041-253/+0
| | | | Change-Id: Ia6eefd23f6671428221e35642f01534bc9fff6ad
* performance profile supportTom Hite2014-10-081-5/+21
| | | | | | | | | | | Many device trees support the recovery.perf.mode property to set various core frequencies and online/offline mode. TWRP is highly threaded, and support for multiple cores on many operations dramatically recudes the time, e.g., backups, zip flashes, etc. p2: removed user notifications Change-Id: I957b8ca40b241c0af0471327eeb329cce1816017
* mtp: cleanup, fixes and performance improvementsthat2014-10-081-7/+6
| | | | | | | | | | | - use std::map instead of linked list - read directories on demand - fix writing zip files to storage root - fix creating directories - lots of minor fixes - simplify generation of storage IDs and make them spec compliant Change-Id: I2137c27549ddbdc58466f2e3aeda464fac70a3c5
* Attempt to automatically identify data/media devicesEthan Yonker2014-09-201-10/+21
| | | | Change-Id: Ia3007fbced9ce3bc94efdb3dacc582a5e68a49a4
* Additional checks to prevent partitioning internal storageEthan Yonker2014-09-151-1/+1
| | | | Change-Id: I9fcd7e0169fbdd52405c0c86aafbef091f69411e
* Fix handling of MTP fork/child processEthan Yonker2014-09-111-1/+6
| | | | Change-Id: Iacd8a38d21e9c8b0dfafefbeb646f46cd3ba02a1
* MTP: Use fork instead of pthreadEthan Yonker2014-09-051-7/+12
| | | | Change-Id: I95cf6f4def0c86f40c775738f0712323f0a0f146
* Allow toggle of MTP debugEthan Yonker2014-09-031-1/+4
| | | | | | | | | | Via command line in TWRP: twrp set tw_mtp_debug 1 This will enable debugging for MTP. You will need to disable and re-enable MTP in order to see the debug logging. Change-Id: Ia7bb0c584e10a4322b65ecf80a67ed7ee836b38e
* add mtp responder to TWRP.bigbiff bigbiff2014-09-031-11/+104
| | | | | | Big thanks to Dees_Troy for helping with the implementation. Change-Id: I6c9c522b9c9de5dc139e2ecb0141008182ba07f0
* Track backup and restore progressEthan Yonker2014-07-091-9/+26
| | | | | | | | Track backup and restore progress based on the sizes of the files as they are being added to the tar backup file. Update the progress bar based on the sizes of the files. Change-Id: Idf649efa1db3e91830b4b2add86203a3f30042ff
* Color in the consoleEthan Yonker2014-07-091-2/+2
| | | | | | | | Allow each gui_print command to specify a color Change LOGERR to use the error color Theme should specify colors for error, warning, and highlight Change-Id: Ie8ece34111f604e25fcb79e5b731cd4e61038ff9
* Whitespace and minor code cleanupMatt Mower2014-06-041-16/+16
| | | | | | This is by no means comprehensive, but is quite a bit better already. Change-Id: Ibc8654a5dfb0eec39cbd0b64bdb52bb4fbfe2f7e
* Add options to repair or change file systemEthan Yonker2014-06-041-0/+135
| | | | Change-Id: I9043e98e1e1ed4722f05c13a60b43d2d0bf739f6
* Fix crash while loading config due to incorrect tw_storage_pathVojtech Bocek2014-05-311-0/+16
| | | | | Change-Id: Ia5957efe616defa4272501cd8f31d26d394077bb Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
* Fix multiple lun file USB mountingMatt Mower2014-05-311-2/+2
| | | | | | | Both the incorrect mount point and the incorrect lun file were being passed as the second storage volume. Change-Id: If9c7d92d1992ec022a2c89a82b2ea05c9150d635
* Only setup settings,andsec partitions if availableMatt Mower2014-04-161-4/+7
| | | | Change-Id: Iafedcec9e6ba368e29e32ab7a92d774cdd3f64e1
* Support alternative .android_secure locationMatt Mower2014-04-161-3/+20
| | | | | | | | | | | | | | | | Some devices (jewel, m8) have .android_secure at a non-standard location. Allow a different partition to be specified as the home of .android_secure using the fstab flag 'andsec'. Using the /data/media variant of jewel as an example, recovery.fstab or twrp.fstab could be edited like follows: /external_sd vfat /dev/block/mmcblk1p1 flags=display="MicroSD";andsec Note, this is NOT a method to move .android_secure in your ROM. Your ROM must already write to this alternative location. Change-Id: I3a6e4e63aaddb35870b79e80938b0f9c2c902443
* Merge "Fix display of .android_secure size in Backup" into android-4.4Dees Troy2014-04-021-1/+1
|\
| * Fix display of .android_secure size in BackupMatt Mower2014-04-021-1/+1
| | | | | | | | | | | | | | | | Setup_Settings_Storage_Partition() needs to be called before Update_System_Details() in order for the /and-sec mount point to be setup and size read correctly. Change-Id: Id5394c90b6d095027c1b852764676dc6080a871d
* | Merge changes Ia75c34ab,I5743d9b9 into android-4.4Ethan Yonker2014-04-021-30/+61
|\ \ | |/ |/| | | | | | | * changes: Support Qualcomm overlay graphics in recovery Improve USB Storage handling
| * Improve USB Storage handlingEthan Yonker2014-04-011-30/+61
| | | | | | | | Change-Id: I5743d9b967a8227c4bb87da01a9c67c574bf9876
* | if md5 check is not selected for subpartitions, don't check it.bigbiff bigbiff2014-03-301-1/+1
|/ | | | Change-Id: I7248c75f17c6f82e098831c297c0662ef6ea289f
* Re-arrange handling of settings storage partitionDees Troy2014-03-191-7/+7
| | | | | | | | | Sometimes we received an error about being unable to locate storage partition because the DataManager would attempt to access the PartitionManager before we finished adding the storage partitions to the vector. Change-Id: I0ce1778938d308b1eb17de46a192ecd52489cad3
* Improve handling of settings storage and android secureEthan Yonker2014-03-131-13/+12
| | | | Change-Id: I8af92543c2f0c201e7220267c417d74e4561038d
* Restore capabilities to run-as binaryDees Troy2014-02-281-1/+1
| | | | Change-Id: I9e2b8e9b69c94b94c57143c04b950530490ec33e
* Check crypto footer before offering to decryptEthan Yonker2014-02-261-3/+3
| | | | | | | | | Verify that we have a valid footer with proper magic before setting things up for decryption to help prevent user confusion when dealing with data partitions that fail to mount. Also check to make sure that the block device for /data is present. Change-Id: Ie87818fe4505a8bf71df7d3934c114e7328ef3ca
* Allow recovery to be restored if backup=1 flag is present in recovery.fstabbigbiff bigbiff2014-02-121-1/+1
| | | | Change-Id: I426c8da8ae586004011ec4a103e1d7a1f23b3599
* Improve android secure handlingEthan Yonker2014-02-031-0/+3
| | | | Change-Id: I9e1c7f4a8353b7be51e1a54bf5d506c9dce70da2
* Fix include of cutilsDees Troy2014-01-231-1/+4
| | | | Change-Id: I9868298908ce501d3043326862057e8a637544af
* Merge changes I4c369222,I8a8ad4b3 into android-4.4Dees Troy2014-01-211-0/+2
|\ | | | | | | | | | | * changes: Enable UMS mounting of storage drives Set listener properties for UMS mount/unmount
| * Set listener properties for UMS mount/unmountMatt Mower2014-01-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some kernels require the usb functions be defined before UMS mounting of storage partitions will work. This sets the sys.storage.ums_enabled property upon mount/unmount which can be listened for in init.rc. Example routines to include in init.rc: on property:sys.storage.ums_enabled=1 write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/functions adb,mass_storage write /sys/class/android_usb/android0/enable 1 on property:sys.storage.ums_enabled=0 write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/functions adb write /sys/class/android_usb/android0/enable ${service.adb.root} Change-Id: I8a8ad4b392abbaa173d402714bcb4049ba84ccca
* | Fix handling of storage after decryptionDees Troy2014-01-211-2/+1
|/ | | | Change-Id: I0c2614f841a225699be9d4a52c60e9456241659b
* Create a TWRP Disk Usage Class to retain state about a directory and whether we should skip it in other classes like twrpTar.bigbiff bigbiff2013-12-191-1/+5
| | | | | | Moved Get_Folder_Size to this new class. Change-Id: If0a0220f900eb109581f2eeaf7b76e3f7d6886f1
* add support for fsflags= option in twrp.fstab fileHashcode2013-12-191-0/+2
| | | | | | | | | example userdata line (as needed by MotoX): /data f2fs /dev/block/platform/msm_sdcc.1/by-name/userdata flags=fsflags="inline_xattr" Code for parsing flags/options originally based on AOSP fs_mgr sources. Change-Id: I5fb2b5d5cdd08137e6bf71f0085a3f8aebd889a8
* Update licenses to all matchDees Troy2013-10-221-21/+17
|
* fix getting and setting contexts in selinuxbigbiff bigbiff2013-10-171-1/+0
| | | | | | recreate lost+found with selinux contexts Change-Id: I19e8696d47319dfb641520956c8a27c2a796a0c3
* Add TWFunc::Exec_Cmd() with no 'result' agrumentVojtech Bocek2013-09-121-7/+7
| | | | | | Signed-off-by: Vojtech Bocek <vbocek@gmail.com> Change-Id: Id8acff1ac9b3c7e4b562c80562a8ff42a1d132b9
* Pull ROM info from build.prop for backup namesDees Troy2013-09-121-4/+5
| | | | Change-Id: I7847fca22b5d4f0a35da41625b15bd677a1e9768
* implement "usermrf" fstab flag to force rm -rf * deletion on specific partitionsHashcode2013-08-301-0/+2
| | | | Change-Id: I58f4a8cedf31e6b6efd88f96a43ed525603ae311
* Unify indentation and little clean-up in TWRP filesVojtech Bocek2013-08-241-8/+8
| | | | Signed-off-by: Vojtech Bocek <vbocek@gmail.com>
* Fix AOSP decrypt when TouchWiz code is presentDees_Troy2013-08-231-0/+1
|
* Fix problem with not waiting for pigz to exitDees_Troy2013-08-141-0/+2
| | | | | In some cases compressed backups would not wait for pigz to finish leading to backup files that were 0 bytes or MD5 mismatches.
* 2.6.0.0Dees_Troy2013-07-031-1/+23
| | | | | Also copy recovery.fstab to cache and create a storage.fstab in cache for app/apk use.
* Fix backup of datadataDees_Troy2013-07-011-3/+4
| | | | Change-Id: Ib0098542599283787592ba08caa070dc818d6111
* Fix some issues with wipe partition listDees_Troy2013-07-011-0/+11
| | | | Change-Id: Ie7d5878faf86b8fa824b72211be7fd3596b471d7
* Support encrypted backup filesDees_Troy2013-06-221-12/+30
| | | | | | | | | | | | | | | Also includes features merged from: Update twrpTar by kokotas Revised function entryExists(). Added function to get archive's uncompressed size. Added option to exclude item(s) from the archive. Revised forks() http://review.teamw.in/#/c/590/ Change-Id: I01fa2c81643161984eff2625247af75990684bd9
* Improve backup list resultsDees_Troy2013-04-081-3/+13
|
* Fix handling of subpartitionsDees_Troy2013-04-051-8/+8
|
* Move all AOSP code out of recovery binaryDees_Troy2013-04-041-163/+140
| | | | | | Improves license compatibility between GPL and Apache Change-Id: I2b165aa575bb6213af6b07936f99610c113443f0
* Add partition list GUI elementDees_Troy2013-03-301-390/+249
| | | | | | | | | | | | Add partition list GUI element and update backup, restore, mount, storage selection, and wipe sections of GUI and partition manager code to reflect the new GUI element. Update ORS engine to handle new backup and restore setup. Fix a bug with decrypt. Add 1080x1920 layout. Change-Id: Iaa2f44cb707167e66f935452f076ba00e68a2aa4
* trying to fix md5bigbiff bigbiff2013-03-171-5/+1
| | | | Change-Id: I4ec037f76aa965bc818afe924942adbe9a080b36
* use md5.c for computation of md5sumsbigbiff bigbiff2013-03-071-13/+24
| | | | | | create a framework for computing digests and reading digests in TWRP add space for backwards compatibility with bb md5sum Change-Id: Ia18e3f430eed5eba22e5052d39b9b8d88ecd4536
* support devices without bootpartitionChampionSwimmer2013-02-191-0/+4
| | | | | | | | | | if device has no /boot partition, then add the following flag in BoardConfig.mk TW_HAS_NO_BOOT_PARTITION Signed-off-by: ChampionSwimmer <android@championswimmer.tk> Change-Id: I92b36b2e6ca690e2422b36004ae9bb315d24a7c2
* convert file_bps to be unsigned long longbigbiff bigbiff2013-02-191-5/+8
| | | | Change-Id: Ib5d9ca8f9a2a4e27d9798665b312376a7d9c571c
* Fix fail over to vfat from exfatDees_Troy2013-02-011-5/+5
| | | | | | | Fix issues with MD5 checking using chdir and leaving the working dir in a subfolder that prevented unmounting sometimes. Change-Id: I01a563d722f474297ed3f7a30064c3a61748ade3
* Disable USB Mass Storage if the USB lun file does not exist.Dees_Troy2013-01-241-4/+0
| | | | Change-Id: I185edb4538fa84c17fc2b9a803557bb7a622f880
* Move backup folder creation to after free space calcDees_Troy2013-01-181-8/+8
| | | | Also fix free space calculation
* ORS engine fixesDees_Troy2013-01-171-28/+29
| | | | | | | | Fix backup to not error when a non-existant partition is given. Fix restore to run when no partition parameters are given. Ensure that ORS runs after decryption and that zips install. Fix a problem with the fake internal sdcard not mounting to /sdcard on data media devices.
* Add flag for retaining layout versionDees_Troy2013-01-151-0/+2
| | | | | | | Needed on Sony mint (Xperia T) as the /data/media folder is a separate partition and normal data media wiping is not appropriate for this device but the layout version file needs to be retained for Android 4.2 multi-user.
* Check to ensure that external is encryptedDees_Troy2013-01-141-0/+7
|
* More Samsung sdcard crypto fixesDees_Troy2013-01-101-1/+1
|
* Fix ifdefs for Samsung encryptionDees_Troy2013-01-101-0/+4
|
* Improve remounting sdcard with ecryptfsDees_Troy2013-01-091-5/+12
|
* Add libtar to TWRP instead of using busybox tarbigbiff bigbiff2013-01-091-31/+42
| | | | | | | Add proper mkdosfs tool Add fuse to TWRP Add experimental exfat-fuse to TWRP Convert all system() functions to use new Exec_Cmd function
* Add Samsung TouchWiz decryptiona39552692013-01-081-1/+52
| | | | Change-Id: I418680e59372160dabfe3e2d5f0208229aa151ae
* Improve handling of undecrypted encrypted /dataGary Peck2012-12-211-0/+3
| | | | | | | | | | - Until the encrypted partition is decrypted, treat it as a disk image instead of a filesystem so that it is properly backed up using dd. - Make Partition::Wipe() use the filesystem from fstab for disk images so that wiping an undecrypted /data makes it a plain unencrypted partition again. Change-Id: I78db977d6348cfa66b0cfbc492fb5776f84db48d
* Add ignore blkid flag for TransformersDees_Troy2012-12-121-0/+2
| | | | Change-Id: I8f2b5b68a8c3ede74858d53002efab997174ee65
* print partition details independent of whether its mountableGary Peck2012-11-221-61/+61
| | | | Change-Id: Ibbc3bf3d3264fb9852f8312ece0567950aace496
* Fixes for multi-user in 4.2Dees_Troy2012-11-151-0/+9
| | | | | | Also fixed inability to delete backups with a space in the name. Change-Id: I2f6639d33caa3c4542960f76adbd59b25ab64f5d
* Unmount main partitions after fixing permissionsDees_Troy2012-10-201-0/+1
|
* Update and improve USB storage codeDees_Troy2012-10-151-82/+39
|
* Handle single lun file for USB storageDees_Troy2012-10-141-34/+60
|
* Fix problem with sizes of images after reset defaultDees_Troy2012-10-131-0/+37
|
* Unmount main partitions after USB storage disableDees_Troy2012-10-121-0/+1
|
* Unmount system after boot, backup, and restoreDees_Troy2012-10-121-0/+19
|
* redo fix permissions in c++ for faster changesbigbiff bigbiff2012-10-101-1/+18
|
* Update sdcard partitioning to C++Dees_Troy2012-09-271-0/+144
|
* Port backup name checking to Partition ManagerDees_Troy2012-09-271-1/+53
|
* Handle mountable boot partitionsDees_Troy2012-09-271-1/+9
|
* Add option to wipe android secureDees_Troy2012-09-261-0/+20
|
* Fix permissions updatesDees_Troy2012-09-261-13/+0
| | | | | Also redirect stderr output on terminal commands for display in GUI console
* Fix problems with MTD devicesDees_Troy2012-09-261-2/+5
| | | | Also improve handling of MTD names
* Unify portrait layouts againDees_Troy2012-09-261-0/+3
|
* Fix skip MD5 setting during backupDees_Troy2012-09-241-4/+6
|
* Add progress bar support to backup and restoreDees_Troy2012-09-211-25/+89
|
* Fix special partition handlingDees_Troy2012-09-211-17/+38
|
* Add android_secure supportDees_Troy2012-09-211-20/+35
|
* Various fixesDees_Troy2012-09-201-3/+1
| | | | | | Modify AOSP mount and wipe functions to use Partition Manager. Update wipe code to reset the log file index when wiping cache. Add ADB sideload to 540x960 theme.
* Fix fstab and unmount problemsDees_Troy2012-09-201-1/+5
| | | | | | Fix a problem parsing some recovery.fstab files. Fixed a problem with MD5 checking that prevented unmounting after md5 checking.
* Add and improve OpenRecoveryScript supportDees_Troy2012-09-201-0/+9
| | | | | Improve zip finding in ORS engine Add support for restoring with just a backup name
* Cleanup extra-functionsDees_Troy2012-09-181-20/+287
|
* Improve backup and restoreDees_Troy2012-09-181-177/+160
| | | | Add in archive splitting support
* Update backup and restore code, adb sideloadDees_Troy2012-09-171-22/+449
| | | | | | | Fixed a problem with using make_ext4fs by making its lib a dynamic lib. Added ADB sideload zip install feature - no way to cancel it yet. Improve backup and restore code.
* Add wipe functions, compiles in CM7, text shows in UI, zips installDees_Troy2012-09-141-30/+126
| | | | | | | | Zip install works, had to move mincrypt code into TWRP to prevent a crash when checking the zip signature. Added wipe functions Made it compile in CM7 Made text show up in console and logging
* Make text appear in GUI console, Zip install works.Dees_Troy2012-09-121-2/+2
| | | | | | | Move TW zip install code to C++ so that it can use the ui->functions. Bring in mincrypt code to fix a crash during signature checking.
* Zip install works againDees_Troy2012-09-111-4/+4
|
* More Partition Manager functionalityDees_Troy2012-09-101-13/+277
|
* Improve storage size code, mount, unmountDees_Troy2012-09-101-50/+192
| | | | Add flag parsing from recovery.fstab
* Add processing of fstab, mounting, and decryptDees_Troy2012-09-071-16/+190
|
* TWRP-ify AOSP codeDees_Troy2012-09-051-0/+147
Pull in most TWRP sources Stub out partition management code Make it compile -- probably will not boot Kind of a mess but have to start somewhere