diff options
Diffstat (limited to '')
| -rw-r--r-- | lib/lua/CMakeLists.txt | 29 | ||||
| -rw-r--r-- | lib/lua/Makefile | 247 |
2 files changed, 148 insertions, 128 deletions
diff --git a/lib/lua/CMakeLists.txt b/lib/lua/CMakeLists.txt new file mode 100644 index 000000000..526be7a46 --- /dev/null +++ b/lib/lua/CMakeLists.txt @@ -0,0 +1,29 @@ + +cmake_minimum_required (VERSION 2.6) +project (lua) + +include_directories ("${PROJECT_SOURCE_DIR}/../../src/") + +file(GLOB SOURCE + "*.c" +) + +list(REMOVE_ITEM SOURCE "${PROJECT_SOURCE_DIR}/lua.c") + +if ((${CMAKE_GENERATOR} MATCHES "Unix Makefiles") AND (NOT LUA_CMAKE_BUILD)) + if(NOT ${PROJECT_SOURCE_DIR} MATCHES ${PROJECT_BINARY_DIR}) + message(WARNING "lua does not support prefix when using the makefile") + endif() + ADD_CUSTOM_COMMAND( + OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/lua + COMMAND "make" + DEPENDS ${SOURCE} + ) + + +else() + message("generator [${CMAKE_GENERATOR}] does not match Unix Makefiles so manually compiling lua") + + add_library(lua ${SOURCE}) + +endif() diff --git a/lib/lua/Makefile b/lib/lua/Makefile index 6e78f66fa..e8040df73 100644 --- a/lib/lua/Makefile +++ b/lib/lua/Makefile @@ -1,128 +1,119 @@ -# makefile for installing Lua -# see INSTALL for installation instructions -# see src/Makefile and src/luaconf.h for further customization - -# == CHANGE THE SETTINGS BELOW TO SUIT YOUR ENVIRONMENT ======================= - -# Your platform. See PLATS for possible values. -PLAT= none - -# Where to install. The installation starts in the src and doc directories, -# so take care if INSTALL_TOP is not an absolute path. -INSTALL_TOP= /usr/local -INSTALL_BIN= $(INSTALL_TOP)/bin -INSTALL_INC= $(INSTALL_TOP)/include -INSTALL_LIB= $(INSTALL_TOP)/lib -INSTALL_MAN= $(INSTALL_TOP)/man/man1 -# -# You probably want to make INSTALL_LMOD and INSTALL_CMOD consistent with -# LUA_ROOT, LUA_LDIR, and LUA_CDIR in luaconf.h (and also with etc/lua.pc). -INSTALL_LMOD= $(INSTALL_TOP)/share/lua/$V -INSTALL_CMOD= $(INSTALL_TOP)/lib/lua/$V - -# How to install. If your install program does not support "-p", then you -# may have to run ranlib on the installed liblua.a (do "make ranlib"). -INSTALL= install -p -INSTALL_EXEC= $(INSTALL) -m 0755 -INSTALL_DATA= $(INSTALL) -m 0644 -# -# If you don't have install you can use cp instead. -# INSTALL= cp -p -# INSTALL_EXEC= $(INSTALL) -# INSTALL_DATA= $(INSTALL) - -# Utilities. -MKDIR= mkdir -p -RANLIB= ranlib - -# == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE ========= - -# Convenience platforms targets. -PLATS= aix ansi bsd freebsd generic linux macosx mingw posix solaris - -# What to install. -TO_BIN= lua luac -TO_INC= lua.h luaconf.h lualib.h lauxlib.h ../etc/lua.hpp -TO_LIB= liblua.a -TO_MAN= lua.1 luac.1 - -# Lua version and release. -V= 5.1 -R= 5.1.4 - -all: $(PLAT) - -$(PLATS) clean: - cd src && $(MAKE) $@ - -test: dummy - src/lua test/hello.lua - -install: dummy - cd src && $(MKDIR) $(INSTALL_BIN) $(INSTALL_INC) $(INSTALL_LIB) $(INSTALL_MAN) $(INSTALL_LMOD) $(INSTALL_CMOD) - cd src && $(INSTALL_EXEC) $(TO_BIN) $(INSTALL_BIN) - cd src && $(INSTALL_DATA) $(TO_INC) $(INSTALL_INC) - cd src && $(INSTALL_DATA) $(TO_LIB) $(INSTALL_LIB) - cd doc && $(INSTALL_DATA) $(TO_MAN) $(INSTALL_MAN) - -ranlib: - cd src && cd $(INSTALL_LIB) && $(RANLIB) $(TO_LIB) - -local: - $(MAKE) install INSTALL_TOP=.. - -none: - @echo "Please do" - @echo " make PLATFORM" - @echo "where PLATFORM is one of these:" - @echo " $(PLATS)" - @echo "See INSTALL for complete instructions." - -# make may get confused with test/ and INSTALL in a case-insensitive OS -dummy: - -# echo config parameters -echo: - @echo "" - @echo "These are the parameters currently set in src/Makefile to build Lua $R:" - @echo "" - @cd src && $(MAKE) -s echo - @echo "" - @echo "These are the parameters currently set in Makefile to install Lua $R:" - @echo "" - @echo "PLAT = $(PLAT)" - @echo "INSTALL_TOP = $(INSTALL_TOP)" - @echo "INSTALL_BIN = $(INSTALL_BIN)" - @echo "INSTALL_INC = $(INSTALL_INC)" - @echo "INSTALL_LIB = $(INSTALL_LIB)" - @echo "INSTALL_MAN = $(INSTALL_MAN)" - @echo "INSTALL_LMOD = $(INSTALL_LMOD)" - @echo "INSTALL_CMOD = $(INSTALL_CMOD)" - @echo "INSTALL_EXEC = $(INSTALL_EXEC)" - @echo "INSTALL_DATA = $(INSTALL_DATA)" - @echo "" - @echo "See also src/luaconf.h ." - @echo "" - -# echo private config parameters -pecho: - @echo "V = $(V)" - @echo "R = $(R)" - @echo "TO_BIN = $(TO_BIN)" - @echo "TO_INC = $(TO_INC)" - @echo "TO_LIB = $(TO_LIB)" - @echo "TO_MAN = $(TO_MAN)" - -# echo config parameters as Lua code -# uncomment the last sed expression if you want nil instead of empty strings -lecho: - @echo "-- installation parameters for Lua $R" - @echo "VERSION = '$V'" - @echo "RELEASE = '$R'" - @$(MAKE) echo | grep = | sed -e 's/= /= "/' -e 's/$$/"/' #-e 's/""/nil/' - @echo "-- EOF" - -# list targets that do not create files (but not all makes understand .PHONY) -.PHONY: all $(PLATS) clean test install local none dummy echo pecho lecho - -# (end of Makefile) +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +# Default target executed when no arguments are given to make. +default_target: all +.PHONY : default_target + +#============================================================================= +# Special targets provided by cmake. + +# Disable implicit rules so canonical targets will work. +.SUFFIXES: + +# Remove some rules from gmake that .SUFFIXES does not remove. +SUFFIXES = + +.SUFFIXES: .hpux_make_needs_suffix_list + +# Suppress display of executed commands. +$(VERBOSE).SILENT: + +# A target that is always out of date. +cmake_force: +.PHONY : cmake_force + +#============================================================================= +# Set environment variables for the build. + +# The shell in which to execute make rules. +SHELL = /bin/sh + +# The CMake executable. +CMAKE_COMMAND = /usr/bin/cmake + +# The command to remove a file. +RM = /usr/bin/cmake -E remove -f + +# The top-level source directory on which CMake was run. +CMAKE_SOURCE_DIR = /home/tycho/MCServer + +# The top-level build directory on which CMake was run. +CMAKE_BINARY_DIR = /home/tycho/MCServer + +#============================================================================= +# Targets provided globally by CMake. + +# Special rule for the target edit_cache +edit_cache: + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running interactive CMake command-line interface..." + /usr/bin/cmake -i . +.PHONY : edit_cache + +# Special rule for the target edit_cache +edit_cache/fast: edit_cache +.PHONY : edit_cache/fast + +# Special rule for the target rebuild_cache +rebuild_cache: + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake to regenerate build system..." + /usr/bin/cmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) +.PHONY : rebuild_cache + +# Special rule for the target rebuild_cache +rebuild_cache/fast: rebuild_cache +.PHONY : rebuild_cache/fast + +# The main all target +all: cmake_check_build_system + cd /home/tycho/MCServer && $(CMAKE_COMMAND) -E cmake_progress_start /home/tycho/MCServer/CMakeFiles /home/tycho/MCServer/lib/lua/CMakeFiles/progress.marks + cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/lua/all + $(CMAKE_COMMAND) -E cmake_progress_start /home/tycho/MCServer/CMakeFiles 0 +.PHONY : all + +# The main clean target +clean: + cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/lua/clean +.PHONY : clean + +# The main clean target +clean/fast: clean +.PHONY : clean/fast + +# Prepare targets for installation. +preinstall: all + cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/lua/preinstall +.PHONY : preinstall + +# Prepare targets for installation. +preinstall/fast: + cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/lua/preinstall +.PHONY : preinstall/fast + +# clear depends +depend: + cd /home/tycho/MCServer && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 1 +.PHONY : depend + +# Help Target +help: + @echo "The following are some of the valid targets for this Makefile:" + @echo "... all (the default if no target is provided)" + @echo "... clean" + @echo "... depend" + @echo "... edit_cache" + @echo "... rebuild_cache" +.PHONY : help + + + +#============================================================================= +# Special targets to cleanup operation of make. + +# Special rule to run CMake to check the build system integrity. +# No rule that depends on this can have commands that come from listfiles +# because they might be regenerated. +cmake_check_build_system: + cd /home/tycho/MCServer && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0 +.PHONY : cmake_check_build_system + |