1 files changed, 63 insertions, 137 deletions

diff --git a/src/Simulator/IncrementalRedstoneSimulator.cpp b/src/Simulator/IncrementalRedstoneSimulator.cpp
index b8da978f2..183c527ca 100644
--- a/src/Simulator/IncrementalRedstoneSimulator.cpp
+++ b/src/Simulator/IncrementalRedstoneSimulator.cpp
@@ -271,6 +271,8 @@ void cIncrementalRedstoneSimulator::SimulateChunk(float a_Dt, int a_ChunkX, int
 		ShouldUpdateSimulateOnceBlocks = true;
 	}
 
+	HandleRedstoneRepeaterDelays();
+
 	for (cRedstoneSimulatorChunkData::iterator dataitr = m_RedstoneSimulatorChunkData->begin(); dataitr != m_RedstoneSimulatorChunkData->end();)
 	{
 		if (dataitr->DataTwo)
@@ -282,26 +284,6 @@ void cIncrementalRedstoneSimulator::SimulateChunk(float a_Dt, int a_ChunkX, int
 		switch (dataitr->Data)
 		{
 			case E_BLOCK_DAYLIGHT_SENSOR: HandleDaylightSensor(dataitr->x, dataitr->y, dataitr->z); break;
-
-			case E_BLOCK_REDSTONE_REPEATER_OFF:
-			case E_BLOCK_REDSTONE_REPEATER_ON:
-			{
-				bool FoundItem = false;
-				for (RepeatersDelayList::iterator repeateritr = m_RepeatersDelayList->begin(); repeateritr != m_RepeatersDelayList->end(); ++repeateritr)
-				{
-					if (repeateritr->a_RelBlockPos == Vector3i(dataitr->x, dataitr->y, dataitr->z))
-					{
-						HandleRedstoneRepeater(dataitr->x, dataitr->y, dataitr->z, dataitr->Data, repeateritr);
-						FoundItem = true;
-						break;
-					}
-				}
-				if (!FoundItem && ShouldUpdateSimulateOnceBlocks)
-				{
-					HandleRedstoneRepeater(dataitr->x, dataitr->y, dataitr->z, dataitr->Data, m_RepeatersDelayList->end());
-				}
-				break;
-			}
 			case E_BLOCK_WOODEN_PRESSURE_PLATE:
 			case E_BLOCK_STONE_PRESSURE_PLATE:
 			case E_BLOCK_LIGHT_WEIGHTED_PRESSURE_PLATE:
@@ -357,6 +339,11 @@ void cIncrementalRedstoneSimulator::SimulateChunk(float a_Dt, int a_ChunkX, int
 					HandlePiston(dataitr->x, dataitr->y, dataitr->z);
 					break;
 				}
+				case E_BLOCK_REDSTONE_REPEATER_OFF:
+				case E_BLOCK_REDSTONE_REPEATER_ON:
+				{
+					HandleRedstoneRepeater(dataitr->x, dataitr->y, dataitr->z, dataitr->Data);
+				}
 				case E_BLOCK_REDSTONE_TORCH_OFF:
 				case E_BLOCK_REDSTONE_TORCH_ON:
 				{
@@ -511,29 +498,10 @@ void cIncrementalRedstoneSimulator::HandleRedstoneLever(int a_RelBlockX, int a_R
 	{
 		SetAllDirsAsPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ);
 
-		NIBBLETYPE Dir = cBlockLeverHandler::BlockMetaDataToBlockFace(Meta);
-		switch (Dir) // Now, flip the direction into the type used by SetBlockLinkedPowered()
-		{
-			case BLOCK_FACE_YP:
-			case BLOCK_FACE_XP:
-			case BLOCK_FACE_ZP:
-			{
-				Dir--;
-				break;
-			}
-			case BLOCK_FACE_XM:
-			case BLOCK_FACE_ZM:
-			case BLOCK_FACE_YM:
-			{
-				Dir++;
-				break;
-			}
-			default:
-			{
-				ASSERT(!"Unhandled lever metadata!");
-				return;
-			}
-		}
+		eBlockFace Dir = cBlockLeverHandler::BlockMetaDataToBlockFace(Meta);
+		
+		Dir = ReverseBlockFace(Dir);
+		
 		SetDirectionLinkedPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ, Dir);
 	}
 }
@@ -579,27 +547,8 @@ void cIncrementalRedstoneSimulator::HandleRedstoneButton(int a_RelBlockX, int a_
 	{
 		SetAllDirsAsPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ);
 		
-		NIBBLETYPE Dir = cBlockButtonHandler::BlockMetaDataToBlockFace(Meta);
-		switch (Dir) // Now, flip the direction into the type used by SetBlockLinkedPowered()
-		{
-			case BLOCK_FACE_XP:
-			case BLOCK_FACE_ZP:
-			{
-				Dir--;
-				break;
-			}
-			case BLOCK_FACE_XM:
-			case BLOCK_FACE_ZM:
-			{
-				Dir++;
-				break;
-			}
-			default:
-			{
-				ASSERT(!"Unhandled button metadata!");
-				return;
-			}
-		}
+		eBlockFace Dir = cBlockButtonHandler::BlockMetaDataToBlockFace(Meta);
+		Dir = ReverseBlockFace(Dir);
 		SetDirectionLinkedPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ, Dir);
 	}
 }
@@ -766,7 +715,7 @@ void cIncrementalRedstoneSimulator::HandleRedstoneWire(int a_RelBlockX, int a_Re
 
 
 
-void cIncrementalRedstoneSimulator::HandleRedstoneRepeater(int a_RelBlockX, int a_RelBlockY, int a_RelBlockZ, BLOCKTYPE a_MyState, RepeatersDelayList::iterator a_Itr)
+void cIncrementalRedstoneSimulator::HandleRedstoneRepeater(int a_RelBlockX, int a_RelBlockY, int a_RelBlockZ, BLOCKTYPE a_MyState)
 {
 	/* Repeater Orientation Mini Guide:
 	===================================
@@ -793,102 +742,79 @@ void cIncrementalRedstoneSimulator::HandleRedstoneRepeater(int a_RelBlockX, int
 	NIBBLETYPE a_Meta = m_Chunk->GetMeta(a_RelBlockX, a_RelBlockY, a_RelBlockZ);
 	bool IsOn = (a_MyState == E_BLOCK_REDSTONE_REPEATER_ON);
     
-	bool WereItrsChanged = false;
 	if (!IsRepeaterLocked(a_RelBlockX, a_RelBlockY, a_RelBlockZ, a_Meta)) // If we're locked, change nothing. Otherwise:
 	{
 		bool IsSelfPowered = IsRepeaterPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ, a_Meta);
 		if (IsSelfPowered && !IsOn) // Queue a power change if powered, but not on and not locked.
 		{
-			WereItrsChanged = QueueRepeaterPowerChange(a_RelBlockX, a_RelBlockY, a_RelBlockZ, a_Meta, true);
+			QueueRepeaterPowerChange(a_RelBlockX, a_RelBlockY, a_RelBlockZ, a_Meta, true);
 		}
 		else if (!IsSelfPowered && IsOn) // Queue a power change if unpowered, on, and not locked.
 		{
-			WereItrsChanged = QueueRepeaterPowerChange(a_RelBlockX, a_RelBlockY, a_RelBlockZ, a_Meta, false);
-		}
-		else if (a_Itr == m_RepeatersDelayList->end())
-		{
-			return;
+			QueueRepeaterPowerChange(a_RelBlockX, a_RelBlockY, a_RelBlockZ, a_Meta, false);
 		}
 	}
-	else if (a_Itr == m_RepeatersDelayList->end())
-	{
-		return;
-	}
+}
 
-	if (WereItrsChanged)
+void cIncrementalRedstoneSimulator::HandleRedstoneRepeaterDelays()
+{
+	for (RepeatersDelayList::iterator itr = m_RepeatersDelayList->begin(); itr != m_RepeatersDelayList->end(); itr++)
 	{
-		for (a_Itr = m_RepeatersDelayList->begin(); a_Itr != m_RepeatersDelayList->end(); ++a_Itr)
-		{
-			if (a_Itr->a_RelBlockPos == Vector3i(a_RelBlockX, a_RelBlockY, a_RelBlockZ))
-			{
-				// Leave a_Itr at where we found the entry
-				break;
-			}
-		}
-	}
 
-	// a_Itr may be passed with m_RepeatersDelayList::end, however, we can guarantee this iterator is always valid because...
-	// ...QueueRepeaterPowerChange is called to add an entry (and the above code updates iterator). However, if the repeater was locked or something similar...
-	// ...we will never get here because of the returns.
-	if (a_Itr->a_ElapsedTicks >= a_Itr->a_DelayTicks) // Has the elapsed ticks reached the target ticks?
-	{
-		if (a_Itr->ShouldPowerOn)
+		if (itr->a_ElapsedTicks >= itr->a_DelayTicks) // Has the elapsed ticks reached the target ticks?
 		{
-			if (!IsOn)
+			int RelBlockX = itr->a_RelBlockPos.x;
+			int RelBlockY = itr->a_RelBlockPos.y;
+			int RelBlockZ = itr->a_RelBlockPos.z;
+			NIBBLETYPE Meta = m_Chunk->GetMeta(RelBlockX, RelBlockY, RelBlockZ);
+			if (itr->ShouldPowerOn)
 			{
-				m_Chunk->SetBlock(a_RelBlockX, a_RelBlockY, a_RelBlockZ, E_BLOCK_REDSTONE_REPEATER_ON, a_Meta); // For performance
-			}
+		
+				m_Chunk->SetBlock(itr->a_RelBlockPos, E_BLOCK_REDSTONE_REPEATER_ON, Meta); // For performance
 
-			switch (a_Meta & 0x3) // We only want the direction (bottom) bits
-			{
-				case 0x0:
+				switch (Meta & 0x3) // We only want the direction (bottom) bits
 				{
-					SetBlockPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ - 1, a_RelBlockX, a_RelBlockY, a_RelBlockZ);
-					SetDirectionLinkedPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ, BLOCK_FACE_ZM);
-					break;
-				}
-				case 0x1:
-				{
-					SetBlockPowered(a_RelBlockX + 1, a_RelBlockY, a_RelBlockZ, a_RelBlockX, a_RelBlockY, a_RelBlockZ);
-					SetDirectionLinkedPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ, BLOCK_FACE_XP);
-					break;
-				}
-				case 0x2:
-				{
-					SetBlockPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ + 1, a_RelBlockX, a_RelBlockY, a_RelBlockZ);
-					SetDirectionLinkedPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ, BLOCK_FACE_ZP);
-					break;
-				}
-				case 0x3:
-				{
-					SetBlockPowered(a_RelBlockX - 1, a_RelBlockY, a_RelBlockZ, a_RelBlockX, a_RelBlockY, a_RelBlockZ);
-					SetDirectionLinkedPowered(a_RelBlockX, a_RelBlockY, a_RelBlockZ, BLOCK_FACE_XM);
-					break;
+					case 0x0:
+					{
+						SetBlockPowered(RelBlockX, RelBlockY, RelBlockZ - 1, RelBlockX, RelBlockY, RelBlockZ);
+						SetDirectionLinkedPowered(RelBlockX, RelBlockY, RelBlockZ, BLOCK_FACE_ZM);
+						break;
+					}
+					case 0x1:
+					{
+						SetBlockPowered(RelBlockX + 1, RelBlockY, RelBlockZ, RelBlockX, RelBlockY, RelBlockZ);
+						SetDirectionLinkedPowered(RelBlockX, RelBlockY, RelBlockZ, BLOCK_FACE_XP);
+						break;
+					}
+					case 0x2:
+					{
+						SetBlockPowered(RelBlockX, RelBlockY, RelBlockZ + 1, RelBlockX, RelBlockY, RelBlockZ);
+						SetDirectionLinkedPowered(RelBlockX, RelBlockY, RelBlockZ, BLOCK_FACE_ZP);
+						break;
+					}
+					case 0x3:
+					{
+						SetBlockPowered(RelBlockX - 1, RelBlockY, RelBlockZ, RelBlockX, RelBlockY, RelBlockZ);
+						SetDirectionLinkedPowered(RelBlockX, RelBlockY, RelBlockZ, BLOCK_FACE_XM);
+						break;
+					}
 				}
 			}
-
-			// Removal of the data entry will be handled in SimChunk - we still want to continue trying to power blocks, even if our delay time has reached
-			// Otherwise, the power state of blocks in front won't update after we have powered on
-			return;
+			else
+			{
+				m_Chunk->SetBlock(RelBlockX, RelBlockY, RelBlockZ, E_BLOCK_REDSTONE_REPEATER_OFF, Meta);
+			}
+			m_RepeatersDelayList->erase(itr);
 		}
 		else
 		{
-			if (IsOn)
-			{
-				m_Chunk->SetBlock(a_RelBlockX, a_RelBlockY, a_RelBlockZ, E_BLOCK_REDSTONE_REPEATER_OFF, a_Meta);
-			}
-			m_RepeatersDelayList->erase(a_Itr); // We can remove off repeaters which don't need further updating
-			return;
+			// Apparently, incrementing ticks only works reliably here, and not in SimChunk;
+			// With a world with lots of redstone, the repeaters simply do not delay
+			// I am confounded to say why. Perhaps optimisation failure.
+			LOGD("Incremented a repeater @ {%i %i %i} | Elapsed ticks: %i | Target delay: %i", itr->a_RelBlockPos.x, itr->a_RelBlockPos.y, itr->a_RelBlockPos.z, itr->a_ElapsedTicks, itr->a_DelayTicks);
+			itr->a_ElapsedTicks++;
 		}
 	}
-	else
-	{
-		// Apparently, incrementing ticks only works reliably here, and not in SimChunk;
-		// With a world with lots of redstone, the repeaters simply do not delay
-		// I am confounded to say why. Perhaps optimisation failure.
-		LOGD("Incremented a repeater @ {%i %i %i} | Elapsed ticks: %i | Target delay: %i", a_Itr->a_RelBlockPos.x, a_Itr->a_RelBlockPos.y, a_Itr->a_RelBlockPos.z, a_Itr->a_ElapsedTicks, a_Itr->a_DelayTicks);
-		a_Itr->a_ElapsedTicks++;
-	}
 }