diff options
Diffstat (limited to '')
| -rwxr-xr-x | glucometer.py | 1 | ||||
| -rw-r--r-- | glucometerutils/common.py | 4 | ||||
| -rw-r--r-- | glucometerutils/drivers/otultra2.py | 232 |
3 files changed, 115 insertions, 122 deletions
diff --git a/glucometer.py b/glucometer.py index 5e05a77..155cd93 100755 --- a/glucometer.py +++ b/glucometer.py @@ -15,7 +15,6 @@ from dateutil import parser as date_parser from glucometerutils import common from glucometerutils import exceptions -from glucometerutils.drivers import otultra2 def main(): parser = argparse.ArgumentParser() diff --git a/glucometerutils/common.py b/glucometerutils/common.py index 825dea1..38f735e 100644 --- a/glucometerutils/common.py +++ b/glucometerutils/common.py @@ -8,6 +8,8 @@ __license__ = 'MIT' import collections +from glucometerutils import exceptions + # Constants for units UNIT_MGDL = 'mg/dL' UNIT_MMOLL = 'mmol/L' @@ -18,8 +20,6 @@ VALID_UNITS = [UNIT_MGDL, UNIT_MMOLL] DATETIME_12HR = '12 hours' DATETIME_24HR = '24 hours' -from glucometerutils import exceptions - def convert_glucose_unit(value, from_unit, to_unit=None): """Convert the given value of glucose level between units. diff --git a/glucometerutils/drivers/otultra2.py b/glucometerutils/drivers/otultra2.py index 1a7b794..dc03c97 100644 --- a/glucometerutils/drivers/otultra2.py +++ b/glucometerutils/drivers/otultra2.py @@ -15,6 +15,93 @@ from glucometerutils import common from glucometerutils import exceptions from glucometerutils.drivers import lifescan_common +# The following two hashes are taken directly from LifeScan's documentation +_MEAL_CODES = { + 'N': '', + 'B': 'Before Meal', + 'A': 'After Meal', +} + +_COMMENT_CODES = { + '00': '', # would be 'No Comment' + '01': 'Not Enough Food', + '02': 'Too Much Food', + '03': 'Mild Exercise', + '04': 'Hard Exercise', + '05': 'Medication', + '06': 'Stress', + '07': 'Illness', + '08': 'Feel Hypo', + '09': 'Menses', + '10': 'Vacation', + '11': 'Other', +} + +_DUMP_HEADER_RE = re.compile( + r'P ([0-9]{3}),"[0-9A-Z]{9}","(?:MG/DL |MMOL/L)"') +_DUMP_LINE_RE = re.compile( + r'P (?P<datetime>"[A-Z]{3}","[0-9/]{8}","[0-9:]{8} "),' + r'"(?P<control>[C ]) (?P<value>[0-9]{3})(?P<parityerror>[\? ])",' + r'"(?P<meal>[NBA])","(?P<comment>0[0-9]|1[01])", 00') + +_RESPONSE_MATCH = re.compile(r'^(.+) ([0-9A-F]{4})\r$') + +def _validate_and_strip_checksum(line): + """Verify the simple 16-bit checksum and remove it from the line. + + Args: + line: the line to check the checksum of. + + Returns: + A copy of the line with the checksum stripped out. + """ + match = _RESPONSE_MATCH.match(line) + + if not match: + raise lifescan_common.MissingChecksum(line) + + response, checksum_string = match.groups() + + try: + checksum_given = int(checksum_string, 16) + checksum_calculated = lifescan_common.calculate_checksum( + bytes(response, 'ascii')) + + if checksum_given != checksum_calculated: + raise lifescan_common.InvalidChecksum(checksum_given, + checksum_calculated) + except ValueError: + raise lifescan_common.InvalidChecksum(checksum_given, None) + + return response + +_DATETIME_RE = re.compile( + r'^"[A-Z]{3}","([0-9]{2}/[0-9]{2}/[0-9]{2})","([0-9]{2}:[0-9]{2}:[0-9]{2}) "$') + + +def _parse_datetime(response): + """Convert a response with date and time from the meter into a datetime. + + Args: + response: the response coming from a DMF or DMT command + + Returns: + A datetime object built according to the returned response. + + Raises: + InvalidResponse if the string cannot be matched by _DATETIME_RE. + """ + match = _DATETIME_RE.match(response) + if not match: + raise exceptions.InvalidResponse(response) + + date, time = match.groups() + month, day, year = [int(part) for part in date.split('/')] + hour, minute, second = [int(part) for part in time.split(':')] + + # Yes, OneTouch2's firmware is not Y2K safe. + return datetime.datetime(2000 + year, month, day, hour, minute, second) + class Device(object): def __init__(self, device): @@ -33,41 +120,9 @@ class Device(object): each command that wakes this model up. """ cmdstring = bytes('\x11\r' + cmd + '\r', 'ascii') - self.serial_.write(cmdstring); + self.serial_.write(cmdstring) self.serial_.flush() - _RESPONSE_MATCH = re.compile(r'^(.+) ([0-9A-F]{4})\r$') - - def _validate_and_strip_checksum(self, line): - """Verify the CRC16 checksum and remove it from the line. - - Args: - line: the line to check the CRC16 of. - - Returns: - A copy of the line with the CRC16 stripped out. - """ - match = self._RESPONSE_MATCH.match(line) - - if not match: - raise lifescan_common.MissingChecksum(line) - - response, checksum_string = match.groups() - - try: - checksum_given = int(checksum_string, 16) - checksum_calculated = lifescan_common.calculate_checksum( - bytes(response, 'ascii')) - - if checksum_given != checksum_calculated: - raise lifescan_common.InvalidChecksum(checksum_given, - checksum_calculated) - except ValueError: - raise lifescan_common.InvalidChecksum(checksum_given, - None) - - return response - def _send_oneliner_command(self, cmd): """Send command and read a one-line response. @@ -80,7 +135,7 @@ class Device(object): self._send_command(cmd) line = self.serial_.readline().decode('ascii') - return self._validate_and_strip_checksum(line) + return _validate_and_strip_checksum(line) def get_information_string(self): """Returns a single string with all the identification information. @@ -143,33 +198,6 @@ class Device(object): return serial_number - # The [TF] at the start is to accept both Get (F) and Set (T) commands. - _DATETIME_RE = re.compile( - r'^"[A-Z]{3}","([0-9]{2}/[0-9]{2}/[0-9]{2})","([0-9]{2}:[0-9]{2}:[0-9]{2}) "$') - - def _parse_datetime(self, response): - """Convert a response with date and time from the meter into a datetime. - - Args: - response: the response coming from a DMF or DMT command - - Returns: - A datetime object built according to the returned response. - - Raises: - InvalidResponse if the string cannot be matched by _DATETIME_RE. - """ - match = self._DATETIME_RE.match(response) - if not match: - raise exceptions.InvalidResponse(response) - - date, time = match.groups() - month, day, year = [int(part) for part in date.split('/')] - hour, minute, second = [int(part) for part in time.split(':')] - - # Yes, OneTouch2's firmware is not Y2K safe. - return datetime.datetime(2000 + year, month, day, hour, minute, second) - def get_datetime(self): """Returns the current date and time for the glucometer. @@ -177,7 +205,7 @@ class Device(object): A datetime object built according to the returned response. """ response = self._send_oneliner_command('DMF') - return self._parse_datetime(response[2:]) + return _parse_datetime(response[2:]) def set_datetime(self, date=datetime.datetime.now()): """Sets the date and time of the glucometer. @@ -192,7 +220,7 @@ class Device(object): response = self._send_oneliner_command( 'DMT' + date.strftime('%m/%d/%y %H:%M:%S')) - return self._parse_datetime(response[2:]) + return _parse_datetime(response[2:]) def zero_log(self): """Zeros out the data log of the device. @@ -204,46 +232,34 @@ class Device(object): if response != 'Z': raise exceptions.InvalidResponse(response) - def _parse_glucose_unit(self, unit): - - """Parses the value of a OneTouch Ultra Glucose unit definition. + _GLUCOSE_UNIT_RE = re.compile(r'^SU\?,"(MG/DL |MMOL/L)"') - Args: - unit: the string reported by the glucometer as glucose unit. + def get_glucose_unit(self): + """Returns a constant representing the unit displayed by the meter. - Return: - common.UNIT_MGDL: if the glucometer reads in mg/dL - common.UNIT_MMOLL: if the glucometer reads in mmol/L + Returns: + common.UNIT_MGDL: if the glucometer displays in mg/dL + common.UNIT_MMOLL: if the glucometer displays in mmol/L Raises: exceptions.InvalidGlucoseUnit: if the unit is not recognized - """ - if unit == 'MG/DL ': - return common.UNIT_MGDL - elif unit == 'MMOL/L': - return common.UNIT_MMOLL - else: - raise exceptions.InvalidGlucoseUnit(string) - _GLUCOSE_UNIT_RE = re.compile(r'^SU\?,"(MG/DL |MMOL/L)"') - - def get_glucose_unit(self): - """Returns a constant representing the unit for the dumped readings. + OneTouch meters will always dump data in mg/dL because that's their internal + storage. They will then provide a separate method to read the unit used for + display. This is not settable by the user in all modern meters. - Returns: - common.UNIT_MGDL: if the glucometer reads in mg/dL - common.UNIT_MMOLL: if the glucometer reads in mmol/L """ response = self._send_oneliner_command('DMSU?') match = self._GLUCOSE_UNIT_RE.match(response) - return self._parse_glucose_unit(match.group(1)) + unit = match.group(1) - _DUMP_HEADER_RE = re.compile(r'P ([0-9]{3}),"[0-9A-Z]{9}","(?:MG/DL |MMOL/L)"') - _DUMP_LINE_RE = re.compile( - r'P (?P<datetime>"[A-Z]{3}","[0-9/]{8}","[0-9:]{8} "),' - r'"(?P<control>[C ]) (?P<value>[0-9]{3})(?P<parityerror>[\? ])",' - r'"(?P<meal>[NBA])","(?P<comment>0[0-9]|1[01])", 00') + if unit == 'MG/DL ': + return common.UNIT_MGDL + elif unit == 'MMOL/L': + return common.UNIT_MMOLL + else: + raise exceptions.InvalidGlucoseUnit(string) def get_readings(self): """Iterates over the reading values stored in the glucometer. @@ -263,7 +279,7 @@ class Device(object): data = self.serial_.readlines() header = data.pop(0).decode('ascii') - match = self._DUMP_HEADER_RE.match(header) + match = _DUMP_HEADER_RE.match(header) if not match: raise exceptions.InvalidResponse(header) @@ -271,41 +287,19 @@ class Device(object): assert count == len(data) for line in data: - line = self._validate_and_strip_checksum(line.decode('ascii')) + line = _validate_and_strip_checksum(line.decode('ascii')) - match = self._DUMP_LINE_RE.match(line) + match = _DUMP_LINE_RE.match(line) if not match: raise exceptions.InvalidResponse(line) line_data = match.groupdict() - date = self._parse_datetime(line_data['datetime']) - meal = self._MEAL_CODES[line_data['meal']] - comment = self._COMMENT_CODES[line_data['comment']] + date = _parse_datetime(line_data['datetime']) + meal = _MEAL_CODES[line_data['meal']] + comment = _COMMENT_CODES[line_data['comment']] # OneTouch2 always returns the data in mg/dL even if the glucometer is set # to mmol/L, so there is no conversion required. yield common.Reading( date, float(line_data['value']), meal=meal, comment=comment) - - # The following two hashes are taken directly from LifeScan's documentation - _MEAL_CODES = { - 'N': '', - 'B': 'Before Meal', - 'A': 'After Meal', - } - - _COMMENT_CODES = { - '00': '', # would be 'No Comment' - '01': 'Not Enough Food', - '02': 'Too Much Food', - '03': 'Mild Exercise', - '04': 'Hard Exercise', - '05': 'Medication', - '06': 'Stress', - '07': 'Illness', - '08': 'Feel Hypo', - '09': 'Menses', - '10': 'Vacation', - '11': 'Other', - } |