1 files changed, 195 insertions, 0 deletions

diff --git a/_ont/ont-luna-sdk-useful-commands.md b/_ont/ont-luna-sdk-useful-commands.md
new file mode 100644
index 0000000..535d62a
--- /dev/null
+++ b/_ont/ont-luna-sdk-useful-commands.md
@@ -0,0 +1,195 @@
+# General Settings and Useful Commands
+
+## Useful files
+- `/var/config/lastgood.xml` - Contains the user portion of the configuration
+{% if include.lastgoodHs %}
+- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (which _should not_ be changed)
+{% endif %}
+- `/tmp/omcilog` - OMCI messages logs (must be enabeled, see below)
+
+## Useful binaries
+- `{{ include.flash }}` - Used to manipulate the config files in a somewhat safe manner
+- `xmlconfig` - Used for low-level manipulation of the XML config files. Called by `{{ include.flash }}`
+- `nv` - Used to manipulate nvram storage, including persistent config entries via `nv setenv`/`nv getenv`
+- `omcicli` - Used to interact with the running OMCI daemon
+- `omci_app` - The OMCI daemon
+- `diag` - Used to run low-level diagnostics commands on the stick
+
+
+## Getting/Setting the ONT's S/N
+```sh
+# {{ include.flash }} get GPON_SN
+GPON_SN=TMBB00000000
+# {{ include.flash }} set GPON_SN TMBB0A1B2C3D
+```
+
+## Getting/Setting the ONT's PLOAM password
+{% if include.ploam == 'asciiAndHex' %}
+
+{% include alert.html content="The ploam can be saved in either ASCII or HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %}
+
+```sh
+# {{ include.flash }} get GPON_PLOAM_PASSWD
+GPON_PLOAM_PASSWD=AAAAAAAAAA
+# {{ include.flash }} set GPON_PLOAM_PASSWD AAAAAAAAAA
+# {{ include.flash }} set GPON_PLOAM_PASSWD 41414141414141414141
+```
+
+{% elsif include.ploam == 'hex' %}
+
+{% include alert.html content="The PLOAM password is stored in HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %}
+
+```sh
+# {{ include.flash }} get GPON_PLOAM_PASSWD
+GPON_PLOAM_PASSWD=41414141414141414141
+# {{ include.flash }} set GPON_PLOAM_PASSWD 41414141414141414141
+```
+{% elsif include.ploam == 'ascii' %}
+
+{% include alert.html content="The PLOAM password is stored in ASCII format" alert="Info" icon="svg-info" color="blue" %}
+
+```sh
+# {{ include.flash }} get GPON_PLOAM_PASSWD
+GPON_PLOAM_PASSWD=AAAAAAAAAA
+# {{ include.flash }} set GPON_PLOAM_PASSWD AAAAAAAAAA
+```
+{% endif %}
+
+## Checking the currently active image
+```sh
+# nv getenv sw_active
+sw_active=1
+# nv getenv sw_version0
+sw_version0=V1_7_8_210412
+# nv getenv sw_version1
+sw_version1=V1_7_8_210412
+```
+
+## Booting to a different image
+```sh
+# nv setenv sw_commit 0|1
+# reboot
+```
+
+## Getting/Setting the ONT Vendor ID
+
+{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
+
+```sh
+# flash get PON_VENDOR_ID  
+PON_VENDOR_ID=ZTEG
+# flash set PON_VENDOR_ID HWTC
+```
+
+## Getting/Settng the ONT Custom software version
+{% assign customSwVersionAlert = include.customSwVersionAlert | default: "This needs the OMCI_OLT_MODE value to be set to 3" %}
+{% include alert.html content=customSwVersionAlert alert="Note" icon="svg-info" color="blue" %}
+
+```sh
+# nv setenv sw_custom_version0 YOURFIRSTSWVER
+# nv setenv sw_custom_version1 YOURSECONDSWVER
+```
+
+## Getting/Setting a custom HW Version
+{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
+
+```sh
+# {{ include.flash }} get HW_HWVER
+HW_HWVER=V2.0
+# {{ include.flash }} set HW_HWVER MYHWVERSION
+```
+
+## Getting/Setting a custom ONT Equipment ID
+{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
+
+```sh
+# {{ include.flash }} get GPON_ONU_MODEL
+GPON_ONU_MODEL=DFP-34X-2C2
+# {{ include.flash }} set GPON_ONU_MODEL DFP-34X-XXX
+```
+
+## Getting/Setting OMCI OLT Mode and Fake OMCI
+
+Configure how ONT Stick handle OMCI from OLT:
+
+```sh
+# {{ include.flash }} get OMCI_OLT_MODE
+OMCI_OLT_MODE=1
+# {{ include.flash }} set OMCI_OLT_MODE 2
+```
+
+| Value | Note            | OMCI Information                               |
+| ----- | --------------- | ---------------------------------------------- |
+| 0     | Default Mode    | Stock, some value are cannot be change         |
+| 1     | Huawei OLT Mode | Huawei MA5671a                                 |
+| 2     | ZTE OLT Mode    | ZTE                                            |
+| 3     | Customized Mode | Custom Software/Hardware Version, OMCC, etc... |
+
+Some Fiber Vendor/Wholesale/ISP have explicit LAN Port Number provisioning or proprietary OMCI that ONT Stick cant not understand, this will make ONT Stick reply OK whatever OMCI OLT throw at. 
+
+`0` = Disable, `1` = Enable, Default is 0
+
+```sh
+# {{ include.flash }} get OMCI_FAKE_OK
+OMCI_FAKE_OK=0
+# {{ include.flash }} set OMCI_FAKE_OK 1
+```
+{% if include.speedLan %}
+
+## Getting/Setting Speed LAN Mode
+{% assign customSpeedLanAlert = include.customSpeedLanAlert | default: "Before editing the speed make sure your hardware supports it." %}
+{% include alert.html content=customSpeedLanAlert alert="Note" icon="svg-info" color="blue" %}
+
+To change the link mode use this command:
+
+```sh
+# {{ include.flash }} get LAN_SDS_MODE
+LAN_SDS_MODE=0
+# {{ include.flash }} set LAN_SDS_MODE 1
+```
+
+| Value | `cat /proc/kmsg`                     | Mode     | Behavior                    |
+| ----- | ------------------------------------ | -------- | --------------------------- |{% if include.speedLan contains '0' %}
+| 0     | `<4>change mode to 0(GE/FE PHY)`     | `TP`     | 1GbaseT/100baseT            |{% endif %}{% if include.speedLan contains '1' %}
+| 1     | `<4>change mode to 1(Fiber 1G)`      | `FIBER`  | 1GbaseX with auto-neg on    |{% endif %}{% if include.speedLan contains '2' %}
+| 2     | `<4>change mode to 2(SGMII PHY)`     | `TP MII` | 1Gb PHY                     |{% endif %}{% if include.speedLan contains '3' %}
+| 3     | `<4>change mode to 3(SGMII MAC)`     | `MII`    | 1Gb MAC                     |{% endif %}{% if include.speedLan contains '4' %}
+| 4     | `<4>change mode to 4(HiSGMII PHY)`   | `TP MII` | 2.5Gb PHY                   |{% endif %}{% if include.speedLan contains '5' %}
+| 5     | `<4>change mode to 5(HiSGMII MAC)`   | `MII`    | 2.5Gb MAC                   |{% endif %}{% if include.speedLan contains '6' %}
+| 6     | `<4>change mode to 6(2500BaseX)`     | `FIBER`  | 2500baseX with auto-neg on  |{% endif %}{% if include.speedLan contains '7' %}
+| 7     | `<4>change mode to 7(SGMII Force)`   | `TP`     | 1GbaseT with auto-neg off   |{% endif %}{% if include.speedLan contains '8' %}
+| 8     | `<4>change mode to 8(HISGMII Force)` | `TP`     | 2500baseT with auto-neg off |{% endif %}
+
+{% endif %}
+
+## Change IP address
+
+```sh
+# {{ flash }} get LAN_IP_ADDR
+LAN_IP_ADDR=192.168.2.1
+# {{ flash }} set LAN_IP_ADDR 192.168.1.1
+```
+
+## Checking whether the connection with the OLT was successful (O5 state)
+
+```sh
+diag gpon get onu-state
+```
+
+## Querying a particular OMCI ME
+```sh
+# omcicli mib get MIB_IDX
+```
+
+## Getting/Setting the L2 Bridge MTU
+{% include alert.html content="Settings given via diag are not permanent after reboot" alert="Note" icon="svg-info" color="blue" %}
+
+Getting/Setting the MTU of the L2 bridge
+```sh
+# diag switch get max-pkt-len port all 
+Port Speed 
+---------- 
+0 1538 
+2 2031 
+# diag switch set max-pkt-len port all length 2000
+```
\ No newline at end of file