diff options
| -rw-r--r-- | _ont/ont-zte-f6005v3.md | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/_ont/ont-zte-f6005v3.md b/_ont/ont-zte-f6005v3.md index 6b51633..e5a4664 100644 --- a/_ont/ont-zte-f6005v3.md +++ b/_ont/ont-zte-f6005v3.md @@ -35,7 +35,7 @@ parent: ZTE ## List of software versions ### HW V3.0 - V3.0.10P3N2 (OpenFiber) -- V3.0.10N06, internal version is V3.0.10P2N6 (TIM Italy) +- V3.0.10N06 (TIM Italy) - Internal version is V3.0.10P2N6 ## List of partitions @@ -57,7 +57,7 @@ parent: ZTE This ONT supports dual boot, as visible from the presence of `kernel0` and `kernel1`, which contain the rootfs (JFFS2 read-only). -The boot images can be swapped if they are the same or use the same **U-Boot** version. If you have a different **U-Boot** that was paired with the active image, do not attempt this, as it will brick the ONT. +The boot images can be swapped if they are the same or use the same **U-Boot** version. If you have a different **U-Boot** that was paired with the active image, do not attempt this, as it will brick the ONT, specially if TTL console is disabled. ```sh upgradetest switchver X @@ -65,6 +65,11 @@ upgradetest switchver X Where `X` can be `0/1`, based on the image you want to boot from. +Get current installed version for each region: + +```sh +upgradetest getver +``` You can also clone the currently running image into the other slot using this command: @@ -219,7 +224,7 @@ setmac 1 2177 AABBCCDD ## Setting ONU GPON PLOAM password {% include alert.html content="The PLOAM password is stored in the ASCII format." alert="Note" icon="svg-info" color="blue" %} -This can be done easily via the web UI. To do it via the shell use: +This can be done easily via the Web UI. To do it via the shell use: ```sh setmac 1 2181 1234567890 setmac 1 2178 1234567890 @@ -276,7 +281,7 @@ Wait reboot.. or powercycle it The ONT will reboot, and you can log in later using `root\Zte521` as the credentials. -**Just for OpenFiber firmware** +**Only for firmware versions with restricted admin access** In case you want add new a admin user instead of using the embedded credentials, run these commands before rebooting the ONT: @@ -295,7 +300,7 @@ Reboot the ONT and you can login to the WebUI using `superadmin\superadmin` as c ## Backing up ONT partitions using hardware flasher -It's possible to swap RAW dump between ONTs and enable access over telnet to modify some ONT parameters. +It's possible to swap RAW dump between ONTs and enable access over Telnet to modify some ONT parameters. Needed tools: |