summaryrefslogtreecommitdiffstats
path: root/_ont
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--_ont/ont-carlitoxxpro-cpgos03-0490-v2.md7
-rw-r--r--_ont/ont-huawei-ma5671a-root.md14
-rw-r--r--_ont/ont-huawei-ma5671a.md14
-rw-r--r--_ont/ont-nokia-g-010g-q.md1
-rw-r--r--_ont/ont-nokia-g-010s-a.md16
-rw-r--r--_ont/ont-nokia-g-010s-b.md15
-rw-r--r--_ont/ont-odi-realtek-dfp-34x-2c2.md38
-rw-r--r--_ont/ont-odi-zte-dfp-34x-2c2.md5
8 files changed, 62 insertions, 48 deletions
diff --git a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md
index daacb51..3137589 100644
--- a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md
+++ b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md
@@ -21,15 +21,12 @@ layout: default
| SSH | ✅ |
| Form Factor | miniONT SFP |
-## List of software versions
-## List of partitions
-## List of firmwares and files
# Known Bugs
-VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII
+- VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII
-You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE
+- You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE
# Miscellaneous Links
diff --git a/_ont/ont-huawei-ma5671a-root.md b/_ont/ont-huawei-ma5671a-root.md
index 38ee822..8f86503 100644
--- a/_ont/ont-huawei-ma5671a-root.md
+++ b/_ont/ont-huawei-ma5671a-root.md
@@ -7,13 +7,12 @@ layout: default
1. take the SFP molex and the 4 coloured cables and solder them to the molex according to the following diagram:
-```
-USB TTL(UART) Adapter ------- SFP 20pins Molex connector
-3.3V ---red ------------------pin #15 and #16
-TX -----orange ---------------pin #2
-RX -----yellow ---------------pin #7
-GND ----green --------------- pin #10
-```
+| USB TTL(UART) Adapter | wire colour in picture | SFP 20pins Molex connector |
+| --------------------- | ---------------------- | -------------------------- |
+| 3.3V | red | pin #15 and #16 |
+| TX | orange | pin #2 |
+| RX | yellow | pin #7 |
+| GND | green | pin #10 |
{% include alert.html content="Use GND wire as ON/OFF switch, otherwise there will be a slight delay before data is displayed on the console (putty/TeraTerm)." alert="Important" icon="svg-warning" color="yellow" %}
@@ -121,4 +120,5 @@ mtd -e image1 write mtd5.bin image1
- [Support MA5671A SFP GPON](https://forum.openwrt.org/t/support-ma5671a-sfp-gpon/48042)
- [La fibre Orange à 2Gbps, sur un routeur MikroTik 10Gbps CCR2004, via un ONT SFP+](https://lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/msg832904/#msg832904)
- [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC)
+- [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC)
diff --git a/_ont/ont-huawei-ma5671a.md b/_ont/ont-huawei-ma5671a.md
index 5029394..4344a55 100644
--- a/_ont/ont-huawei-ma5671a.md
+++ b/_ont/ont-huawei-ma5671a.md
@@ -35,13 +35,13 @@ layout: default
## Serial
-```
-USB TTL(UART) Adapter ------- SFP 20pins Molex connector
-3.3V ---red ------------------pin #15 and #16
-TX -----orange ---------------pin #2
-RX -----yellow ---------------pin #7
-GND ----green --------------- pin #10
-```
+| USB TTL(UART) Adapter | SFP 20pins Molex connector |
+| --------------------- | -------------------------- |
+| 3.3V | pin #15 and #16 |
+| TX | pin #2 |
+| RX | pin #7 |
+| GND | pin #10 |
+
Configuration: asc0=0 115200 8-N-1
## Root procedure
diff --git a/_ont/ont-nokia-g-010g-q.md b/_ont/ont-nokia-g-010g-q.md
index 7eec744..720cf10 100644
--- a/_ont/ont-nokia-g-010g-q.md
+++ b/_ont/ont-nokia-g-010g-q.md
@@ -43,6 +43,7 @@ This ont seems to support dual boot (notice partitions "ImageA" and "ImageB"), h
## List of firmwares and files
# Serial
+
{% include image.html file="g-010g-q-serial-pinout.jpg" alt="G-010G-Q " caption="G-010G-Q: serial pinout" %}
You can easily communicate with the ONT using a TTL converter (for example the CH341A programmer in TTL mode) by connecting the converters' pins to the ONT following the pinout shown in the image above
diff --git a/_ont/ont-nokia-g-010s-a.md b/_ont/ont-nokia-g-010s-a.md
index 04edfa7..4a2a544 100644
--- a/_ont/ont-nokia-g-010s-a.md
+++ b/_ont/ont-nokia-g-010s-a.md
@@ -38,13 +38,13 @@ Turning a [Nokia G-010S-P](/ont-nokia-g-010s-p) into a [Nokia G-010S-A](/ont-nok
## Serial
-```
-USB TTL(UART) Adapter ------- SFP 20pins Molex connector
-3.3V ---red ------------------pin #15 and #16
-TX -----orange ---------------pin #3
-RX -----yellow ---------------pin #6
-GND ----green --------------- pin #10
-```
+| USB TTL(UART) Adapter | SFP 20pins Molex connector |
+| --------------------- | -------------------------- |
+| 3.3V | pin #15 and #16 |
+| TX | pin #3 |
+| RX | pin #6 |
+| GND | pin #10 |
+
Configuration: asc0=0 115200 8-N-1
## Disabling Dying Gasp
@@ -61,4 +61,6 @@ uci set gpon.gtc.nDyingGaspEnable='0'; uci commit gpon
# Miscellaneous Links
- [G-010S-A](https://github.com/hwti/G-010S-A)
+- [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300)
+- [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC)
diff --git a/_ont/ont-nokia-g-010s-b.md b/_ont/ont-nokia-g-010s-b.md
index 55379f9..5ab6f23 100644
--- a/_ont/ont-nokia-g-010s-b.md
+++ b/_ont/ont-nokia-g-010s-b.md
@@ -49,13 +49,13 @@ layout: default
## Serial
-```
-USB TTL(UART) Adapter ------- SFP 20pins Molex connector
-3.3V ---red ------------------pin #15 and #16
-TX -----orange ---------------pin #3
-RX -----yellow ---------------pin #6
-GND ----green --------------- pin #10
-```
+| USB TTL(UART) Adapter | SFP 20pins Molex connector |
+| --------------------- | -------------------------- |
+| 3.3V | pin #15 and #16 |
+| TX | pin #2 |
+| RX | pin #7 |
+| GND | pin #10 |
+
Configuration: asc0=0 115200 8-N-1
## Disabling Dying Gasp
@@ -73,4 +73,5 @@ uci set gpon.gtc.nDyingGaspEnable='0'; uci commit gpon
- [G-010S-A](https://github.com/hwti/G-010S-A)
- [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300)
+- [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC)
diff --git a/_ont/ont-odi-realtek-dfp-34x-2c2.md b/_ont/ont-odi-realtek-dfp-34x-2c2.md
index 6c6645f..185656b 100644
--- a/_ont/ont-odi-realtek-dfp-34x-2c2.md
+++ b/_ont/ont-odi-realtek-dfp-34x-2c2.md
@@ -1,5 +1,6 @@
---
-title: ODI Realtek DFP-34X-C2C (XPON)
+title: ODI Realtek DFP-34X-C2C
+description: New model 2022
has_children: false
layout: default
---
@@ -31,10 +32,14 @@ ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.16
## List of software versions
-- V1.0-220530 Modded by [stich86](https://github.com/stich86) **SUGGESTED** since it has working VLAN translation. Download link: [github.com](https://github.com/Anime4000/RTL960x/files/8821809/M114_sfp_ODI_hybrid_220527_stich86_220530.tar.zip)
+- V1.0-220530
- V1.0-220414
- V1.0-220304
+## List of firmwares and files
+- [V1.0-220530 Modded](https://github.com/Anime4000/RTL960x/files/8821809/M114_sfp_ODI_hybrid_220527_stich86_220530.tar.zip){: .btn }
+ by [stich86](https://github.com/stich86) **SUGGESTED** since it has working VLAN translation.
+
## List of partitions
| dev | size | erasesize | name |
@@ -58,6 +63,22 @@ This stick supports dual boot.
`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one
+# Serial
+
+The stick has exposed TTL pads:
+
+{% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl.jpg" alt="DFP-34X-2C2 TTL Connection" caption="DFP-34X-2C2 TTL Connection" %}
+{% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg" alt="DFP-34X-2C2 TTL Pin" caption="DFP-34X-2C2 TTL Pin" %}
+
+| USB TTL(UART) Adapter | wire colour in picture | SFP 20pins Molex connector and TTL pinout |
+| --------------------- | ---------------------- | ----------------------------------------- |
+| 3.3V | blue | pin #15 and #16 |
+| TX | purple | TX |
+| RX | white | RX |
+| GND | green | pin #10 |
+
+Configuration: asc0=0 115200 8-N-1
+
# Useful Commands
## Getting/Setting the ONT's S/N
@@ -136,22 +157,11 @@ sw_active=1
# Low level modding
-## TTL connection
-
-The stick has exposed TTL pads:
-
-{% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl.jpg" alt="DFP-34X-2C2 TTL Connection" caption="DFP-34X-2C2 TTL Connection" %}
-
-- TX is on the left (purple lead);
-- RX on the right (white lead);
-- VCC (+3.3V) is SFP pin 15 or 16;
-- GND is on SFP pin 10;
-
-The serial port uses 115200 baud 8N1
# Miscellaneous Links
- [Hacking RTL960x](https://github.com/Anime4000/RTL960x)
- [Ditch ONU, use GPON SFP on Business Grade Router, Mikrotik/Ubiquiti/pfSense (Home Networking)](https://forum.lowyat.net/topic/4925452)
+- [For the new model ODI ZTE DFP-34X-C2C](/ont-odi-zte-dfp-34x-2c2)
diff --git a/_ont/ont-odi-zte-dfp-34x-2c2.md b/_ont/ont-odi-zte-dfp-34x-2c2.md
index 65f5642..c070029 100644
--- a/_ont/ont-odi-zte-dfp-34x-2c2.md
+++ b/_ont/ont-odi-zte-dfp-34x-2c2.md
@@ -1,7 +1,9 @@
---
-title: ODI ZTE DFP-34X-C2C (GPON)
+title: ODI ZTE DFP-34X-C2C
+description: Old model 2020
has_children: false
layout: default
+nav_exclude: true
---
# Hardware Specifications
@@ -32,3 +34,4 @@ layout: default
- [GPON module Dfp-34g-2c2 sfp](https://forum.openwrt.org/t/gpon-module-dfp-34g-2c2-sfp/51641)
- [Ditch ONU, use GPON SFP on Business Grade Router, Mikrotik/Ubiquiti/pfSense (Home Networking)](https://forum.lowyat.net/topic/4925452)
- [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300)
+- [For the new model ODI Realtek DFP-34X-C2C](/ont-odi-realtek-dfp-34x-2c2)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 10:01:20 +0100