1 files changed, 23 insertions, 26 deletions

diff --git a/examples/Single_Shot/Single_Shot.ino b/examples/Single_Shot/Single_Shot.ino
index ba1a656..be0cf83 100644
--- a/examples/Single_Shot/Single_Shot.ino
+++ b/examples/Single_Shot/Single_Shot.ino
@@ -13,7 +13,7 @@
 #define I2C_ADDRESS 0x48

 

 ADS1115_WE adc(I2C_ADDRESS);

-// ADS1115_WE adc = ADS1115_WE(); // Alternative: uses default address 0x48

+// ADS1115_WE adc = ADS1115_WE(); // Alternative: sets default address 0x48

 

 void setup() {

   Wire.begin();

@@ -32,7 +32,7 @@ void setup() {
    * ADS1115_RANGE_0512  ->  +/- 512 mV

    * ADS1115_RANGE_0256  ->  +/- 256 mV

    */

-  adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change parameter to change range

+  adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change paramater to change range

 

   /* Set the inputs to be compared

    *  

@@ -101,7 +101,7 @@ void setup() {
 

   /* Sets the alert pin polarity if active:

    *  

-   * Enable or disable latch. If latch is enabled the alarm pin will be active until the

+   *  /* Enable or disable latch. If latch is enabled the alarm pin will be active until the

    * conversion register is read (getResult functions). If disabled the alarm pin will be

    * deactivated with next value within limits. 

    *  

@@ -116,40 +116,37 @@ void setup() {
   //adc.setAlertPinToConversionReady(); //uncomment if you want to change the default

 

   Serial.println("ADS1115 Example Sketch - Single Shot Mode");

+  Serial.println("Channel / Voltage [V]: ");

   Serial.println();

 }

 

 void loop() {

   float voltage = 0.0;

 

-  adc.setCompareChannels(ADS1115_COMP_0_GND);

-  adc.startSingleMeasurement();

-  while(adc.isBusy()){}

-  voltage = adc.getResult_V(); // alternative: getResult_mV for Millivolt

-  Serial.print("Channel 0 vs GND [V]: ");

-  Serial.println(voltage);

+  Serial.print("0: ");

+  voltage = readChannel(ADS1115_COMP_0_GND);

+  Serial.print(voltage);

 

-  adc.setCompareChannels(ADS1115_COMP_1_GND);

-  adc.startSingleMeasurement();

-  while(adc.isBusy()){}

-  voltage = adc.getResult_V(); // alternative: getResult_mV for Millivolt

-  Serial.print("Channel 1 vs GND [V]: ");

-  Serial.println(voltage);

+  Serial.print(",   1: ");

+  voltage = readChannel(ADS1115_COMP_1_GND);

+  Serial.print(voltage);

+  

+  Serial.print(",   2: ");

+  voltage = readChannel(ADS1115_COMP_2_GND);

+  Serial.print(voltage);

 

-  adc.setCompareChannels(ADS1115_COMP_2_GND);

-  adc.startSingleMeasurement();

-  while(adc.isBusy()){}

-  voltage = adc.getResult_V(); // alternative: getResult_mV for Millivolt

-  Serial.print("Channel 2 vs GND [V]: ");

+  Serial.print(",   3: ");

+  voltage = readChannel(ADS1115_COMP_3_GND);

   Serial.println(voltage);

 

-  adc.setCompareChannels(ADS1115_COMP_3_GND);

+  delay(1000);

+}

+

+float readChannel(ADS1115_MUX channel) {

+  float voltage = 0.0;

+  adc.setCompareChannels(channel);

   adc.startSingleMeasurement();

   while(adc.isBusy()){}

   voltage = adc.getResult_V(); // alternative: getResult_mV for Millivolt

-  Serial.print("Channel 3 vs GND [V]: ");

-  Serial.println(voltage);

-

-  Serial.println("-------------------------------");

-  delay(2000);

+  return voltage;

 }