1 files changed, 5 insertions, 2 deletions

diff --git a/5.-KrakenSDR-Web-Interface-Controls.md b/5.-KrakenSDR-Web-Interface-Controls.md
index 83e4b70..498c92d 100644
--- a/5.-KrakenSDR-Web-Interface-Controls.md
+++ b/5.-KrakenSDR-Web-Interface-Controls.md
@@ -313,7 +313,8 @@ How many coherent calibration sync failures are required before recalibration is
 
 This provides an option to calibrate the full system by compensating for phase differences in the antenna coax cables.
 
-`explicit-time-delay` - If you've measure time delay with a VNA you can input the differences here. Please note the differences must be measured relative to channel 0. TODO: Show how to calculate time delay from cable length + velocity factor.
+`explicit-time-delay` - If you've measure time delay with a VNA you can input the differences here. Please note the differences must be measured relative to channel 0. 
+
 `touchtone` - You can output .s1p files for the 5 coax cables in your system, and add them to the _calibration folder. Name them as cable_ch0.s1p, cable_ch1.s1p and so on. You need to ensure that the touchstone file covers the frequency range that you will be using.
 
 **IQ Adjust Amplitude**
@@ -322,4 +323,6 @@ If you have some reason to manually adjust IQ amplitudes, this can be done here.
 
 **IQ Adjust Time Delay**
 
-If you are using `explicit-time-delay` as the IQ adjustment source, enter the delta phase differences here. (Relative to the CH0 cable, so delta = CH_0 - CH_X) 
\ No newline at end of file
+If you are using `explicit-time-delay` as the IQ adjustment source, enter the delta time differences here. (Relative to the CH0 cable, so delta = CH_0 - CH_X) 
+
+**TODO: Show how to calculate time delay from cable length + velocity factor.**
\ No newline at end of file