summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xheimdall-frontend/Source/FirmwareInfo.cpp571
-rwxr-xr-xheimdall-frontend/Source/FirmwareInfo.h286
-rwxr-xr-xheimdall-frontend/Source/PackageData.cpp65
-rwxr-xr-xheimdall-frontend/Source/PackageData.h77
-rwxr-xr-xheimdall-frontend/Source/Packaging.cpp345
-rwxr-xr-xheimdall-frontend/Source/Packaging.h110
-rw-r--r--heimdall-frontend/Source/aboutform.cpp2
-rw-r--r--heimdall-frontend/Source/aboutform.h6
-rw-r--r--heimdall-frontend/Source/main.cpp14
-rw-r--r--heimdall-frontend/Source/mainwindow.cpp972
-rw-r--r--heimdall-frontend/Source/mainwindow.h85
-rw-r--r--heimdall-frontend/aboutform.ui25
-rw-r--r--heimdall-frontend/heimdall-frontend.vcxproj36
-rw-r--r--heimdall-frontend/heimdall-frontend.vcxproj.filters18
-rwxr-xr-xheimdall-frontend/include/zconf.h428
-rwxr-xr-xheimdall-frontend/include/zlib.h1613
-rwxr-xr-xheimdall-frontend/lib/win32/zlib.libbin0 -> 239312 bytes
-rw-r--r--heimdall-frontend/mainwindow.ui1366
-rw-r--r--heimdall/heimdall.vcxproj24
-rw-r--r--heimdall/heimdall.vcxproj.filters12
-rw-r--r--heimdall/source/BridgeManager.cpp307
-rw-r--r--heimdall/source/BridgeManager.h7
-rw-r--r--heimdall/source/Interface.cpp409
-rw-r--r--heimdall/source/Interface.h255
-rw-r--r--heimdall/source/InterfaceManager.cpp325
-rw-r--r--heimdall/source/InterfaceManager.h123
-rw-r--r--heimdall/source/OutboundPacket.h2
-rw-r--r--heimdall/source/main.cpp342
-rwxr-xr-xlibpit/Source/libpit.cpp (renamed from heimdall/source/PitData.cpp)122
-rwxr-xr-xlibpit/Source/libpit.h (renamed from heimdall/source/PitData.h)43
-rwxr-xr-xlibpit/libpit.vcxproj119
-rwxr-xr-xlibpit/libpit.vcxproj.filters19
-rw-r--r--msvc2010.sln15
33 files changed, 6330 insertions, 1813 deletions
diff --git a/heimdall-frontend/Source/FirmwareInfo.cpp b/heimdall-frontend/Source/FirmwareInfo.cpp
new file mode 100755
index 0000000..7d11605
--- /dev/null
+++ b/heimdall-frontend/Source/FirmwareInfo.cpp
@@ -0,0 +1,571 @@
+/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+// Heimdall Frontend
+#include "FirmwareInfo.h"
+
+using namespace HeimdallFrontend;
+
+DeviceInfo::DeviceInfo()
+{
+}
+
+DeviceInfo::DeviceInfo(const QString& manufacturer, const QString& product, const QString& name)
+{
+ this->manufacturer = manufacturer;
+ this->product = product;
+ this->name = name;
+}
+
+bool DeviceInfo::ParseXml(QXmlStreamReader& xml)
+{
+ bool foundManufacturer = false;
+ bool foundProduct = false;
+ bool foundName = false;
+
+ while (!xml.atEnd())
+ {
+ QXmlStreamReader::TokenType nextToken = xml.readNext();
+
+ if (nextToken == QXmlStreamReader::StartElement)
+ {
+ if (xml.name() == "manufacturer")
+ {
+ if (foundManufacturer)
+ {
+ // TODO: "found multiple device manufacturers."
+ return (false);
+ }
+
+ foundManufacturer = true;
+
+ manufacturer = xml.readElementText();
+ }
+ else if (xml.name() == "product")
+ {
+ if (foundProduct)
+ {
+ // TODO: "found multiple device product identifiers."
+ return (false);
+ }
+
+ foundProduct = true;
+
+ product = xml.readElementText();
+ }
+ else if (xml.name() == "name")
+ {
+ if (foundName)
+ {
+ // TODO: "found multiple device names."));
+ return (false);
+ }
+
+ foundName = true;
+
+ name = xml.readElementText();
+ }
+ }
+ else if (nextToken == QXmlStreamReader::EndElement)
+ {
+ if (xml.name() == "device")
+ return (foundManufacturer && foundProduct && foundName);
+ }
+ else
+ {
+ if (!(nextToken == QXmlStreamReader::Characters && xml.isWhitespace()))
+ {
+ // TODO: "Unexpected token found in <device>"
+ return (false);
+ }
+ }
+ }
+
+ return (false);
+}
+
+
+
+PlatformInfo::PlatformInfo()
+{
+}
+
+void PlatformInfo::Clear(void)
+{
+ name.clear();
+ version.clear();
+}
+
+bool PlatformInfo::IsCleared(void) const
+{
+ return (name.isEmpty() && version.isEmpty());
+}
+
+bool PlatformInfo::ParseXml(QXmlStreamReader& xml)
+{
+ Clear();
+
+ bool foundName = false;
+ bool foundVersion = false;
+
+ while (!xml.atEnd())
+ {
+ QXmlStreamReader::TokenType nextToken = xml.readNext();
+
+ if (nextToken == QXmlStreamReader::StartElement)
+ {
+ if (xml.name() == "name")
+ {
+ if (foundName)
+ {
+ // TODO: "found multiple platform names."
+ return (false);
+ }
+
+ foundName = true;
+
+ name = xml.readElementText();
+ }
+ else if (xml.name() == "version")
+ {
+ if (foundVersion)
+ {
+ // TODO: "found multiple platform versions."
+ return (false);
+ }
+
+ foundVersion = true;
+
+ version = xml.readElementText();
+ }
+ else
+ {
+ // TODO: "found unknown <platform> sub-element <" + xml.name() + ">."
+ return (false);
+ }
+ }
+ else if (nextToken == QXmlStreamReader::EndElement)
+ {
+ if (xml.name() == "platform")
+ return (foundName && foundVersion);
+ }
+ else
+ {
+ if (!(nextToken == QXmlStreamReader::Characters && xml.isWhitespace()))
+ {
+ // TODO: "Unexpected token found in <platform>"
+ return (false);
+ }
+ }
+ }
+
+ return (false);
+}
+
+
+
+FileInfo::FileInfo()
+{
+}
+
+FileInfo::FileInfo(unsigned int partitionId, const QString& filename)
+{
+ this->partitionId = partitionId;
+ this->filename = filename;
+}
+
+bool FileInfo::ParseXml(QXmlStreamReader& xml)
+{
+ bool foundId = false;
+ bool foundFilename = false;
+
+ while (!xml.atEnd())
+ {
+ QXmlStreamReader::TokenType nextToken = xml.readNext();
+
+ if (nextToken == QXmlStreamReader::StartElement)
+ {
+ if (xml.name() == "id")
+ {
+ if (foundId)
+ {
+ // TODO: "found multiple file IDs."
+ return (false);
+ }
+
+ foundId = true;
+
+ partitionId = xml.readElementText().toInt();
+ }
+ else if (xml.name() == "filename")
+ {
+ if (foundFilename)
+ {
+ // TODO: "found multiple file filenames."
+ return (false);
+ }
+
+ foundFilename = true;
+
+ filename = xml.readElementText();
+ }
+ }
+ else if (nextToken == QXmlStreamReader::EndElement)
+ {
+ if (xml.name() == "file")
+ return (foundId && foundFilename);
+ }
+ else
+ {
+ if (!(nextToken == QXmlStreamReader::Characters && xml.isWhitespace()))
+ {
+ // TODO: "Unexpected token found in <file>"
+ return (false);
+ }
+ }
+ }
+
+ return (false);
+}
+
+
+
+FirmwareInfo::FirmwareInfo()
+{
+ repartition = false;
+}
+
+void FirmwareInfo::Clear(void)
+{
+ name = "";
+ version = "";
+ platformInfo.Clear();
+
+ developers.clear();
+ url.clear();
+ donateUrl.clear();
+
+ deviceInfos.clear();
+
+ pitFilename.clear();
+ repartition = false;
+
+ fileInfos.clear();
+}
+
+bool FirmwareInfo::IsCleared(void) const
+{
+ return (name.isEmpty() && version.isEmpty() && platformInfo.IsCleared() && developers.isEmpty() && url.isEmpty() && url.isEmpty() && donateUrl.isEmpty()
+ && deviceInfos.isEmpty() && pitFilename.isEmpty() && !repartition && fileInfos.isEmpty());
+}
+
+bool FirmwareInfo::ParseXml(QXmlStreamReader& xml)
+{
+ Clear();
+
+ bool foundName = false;
+ bool foundVersion = false;
+ bool foundPlatform = false;
+ bool foundDevelopers = false;
+ bool foundUrl = false;
+ bool foundDonateUrl = false;
+ bool foundDevices = false;
+ bool foundPit = false;
+ bool foundRepartition = false;
+ bool foundFiles = false;
+
+ if (!xml.readNextStartElement())
+ {
+ // TODO: "Failed to find <firmware> element."
+ return (false);
+ }
+
+ if (xml.name() != "firmware")
+ {
+ // TODO: "Expected <firmware> element but found <%s>"
+ return (false);
+ }
+
+ QString formatVersionString;
+ formatVersionString += xml.attributes().value("version");
+
+ if (formatVersionString.isEmpty())
+ {
+ // TODO: <firmware> is missing a version."
+ return (false);
+ }
+
+ bool parsedVersion = false;
+ int formatVersion = formatVersionString.toInt(&parsedVersion);
+
+ if (!parsedVersion)
+ {
+ // TODO: "<firmware> contains a malformed version."
+ return (false);
+ }
+
+ if (formatVersion > kVersion)
+ {
+ // TODO: "Package is for a newer version of Heimdall Frontend. Please download the latest version of Heimdall Frontend."
+ return (false);
+ }
+
+ while (!xml.atEnd())
+ {
+ QXmlStreamReader::TokenType nextToken = xml.readNext();
+
+ if (nextToken == QXmlStreamReader::StartElement)
+ {
+ if (xml.name() == "name")
+ {
+ if (foundName)
+ {
+ // TODO: "found multiple firmware names."
+ return (false);
+ }
+
+ foundName = true;
+ name = xml.readElementText();
+ }
+ else if (xml.name() == "version")
+ {
+ if (foundVersion)
+ {
+ // TODO: "found multiple firmware versions."
+ return (false);
+ }
+
+ foundVersion = true;
+ version = xml.readElementText();
+ }
+ else if (xml.name() == "platform")
+ {
+ if (foundPlatform)
+ {
+ // TODO: "found multiple firmware platforms."
+ return (false);
+ }
+
+ foundPlatform = true;
+
+ if (!platformInfo.ParseXml(xml))
+ return (false);
+ }
+ else if (xml.name() == "developers")
+ {
+ if (foundDevelopers)
+ {
+ // TODO: "found multiple sets of firmware developers."
+ return (false);
+ }
+
+ foundDevelopers = true;
+
+ while (!xml.atEnd())
+ {
+ nextToken = xml.readNext();
+
+ if (nextToken == QXmlStreamReader::StartElement)
+ {
+ if (xml.name() == "name")
+ developers.append(xml.readElementText());
+ }
+ else if (nextToken == QXmlStreamReader::EndElement)
+ {
+ if (xml.name() == "developers")
+ break;
+ }
+ else
+ {
+ if (!(nextToken == QXmlStreamReader::Characters && xml.isWhitespace()))
+ {
+ // TODO: "Unexpected token found in <developers>"
+ return (false);
+ }
+ }
+ }
+ }
+ else if (xml.name() == "url")
+ {
+ if (foundUrl)
+ {
+ // TODO: "found multiple firmware URLs."
+ return (false);
+ }
+
+ foundUrl = true;
+
+ url = xml.readElementText();
+ }
+ else if (xml.name() == "donateurl")
+ {
+ if (foundDonateUrl)
+ {
+ // TODO: "found multiple firmware donate URLs."
+ return (false);
+ }
+
+ foundDonateUrl = true;
+
+ donateUrl = xml.readElementText();
+ }
+ else if (xml.name() == "devices")
+ {
+ if (foundDevices)
+ {
+ // TODO: "found multiple sets of firmware devices."
+ return (false);
+ }
+
+ foundDevices = true;
+
+ while (!xml.atEnd())
+ {
+ nextToken = xml.readNext();
+
+ if (nextToken == QXmlStreamReader::StartElement)
+ {
+ if (xml.name() == "device")
+ {
+ DeviceInfo deviceInfo;
+
+ if (!deviceInfo.ParseXml(xml))
+ return (false);
+
+ deviceInfos.append(deviceInfo);
+ }
+ }
+ else if (nextToken == QXmlStreamReader::EndElement)
+ {
+ if (xml.name() == "devices")
+ break;
+ }
+ else
+ {
+ if (!(nextToken == QXmlStreamReader::Characters && xml.isWhitespace()))
+ {
+ // TODO: "Unexpected token found in <devices>"
+ return (false);
+ }
+ }
+ }
+ }
+ else if (xml.name() == "pit")
+ {
+ if (foundPit)
+ {
+ // TODO: "found multiple firmware PIT files."
+ return (false);
+ }
+
+ foundPit = true;
+
+ pitFilename = xml.readElementText();
+ }
+ else if (xml.name() == "repartition")
+ {
+ if (foundRepartition)
+ {
+ // TODO: "found multiple firmware repartition values."
+ return (false);
+ }
+
+ foundRepartition = true;
+
+ repartition = (xml.readElementText().toInt() != 0);
+ }
+ else if (xml.name() == "files")
+ {
+ if (foundFiles)
+ {
+ // TODO: "found multiple sets of firmware files."
+ return (false);
+ }
+
+ foundFiles = true;
+
+ while (!xml.atEnd())
+ {
+ nextToken = xml.readNext();
+
+ if (nextToken == QXmlStreamReader::StartElement)
+ {
+ if (xml.name() == "file")
+ {
+ FileInfo fileInfo;
+
+ if (!fileInfo.ParseXml(xml))
+ return (false);
+
+ fileInfos.append(fileInfo);
+ }
+ }
+ else if (nextToken == QXmlStreamReader::EndElement)
+ {
+ if (xml.name() == "files")
+ break;
+ }
+ else
+ {
+ if (!(nextToken == QXmlStreamReader::Characters && xml.isWhitespace()))
+ {
+ // TODO: "Unexpected token found in <devices>"
+ return (false);
+ }
+ }
+ }
+ }
+ else
+ {
+ // TODO: "unknown <firmware> sub-element <" + xml.name() + ">."
+ return (false);
+ }
+ }
+ else if (nextToken == QXmlStreamReader::EndElement)
+ {
+ if (xml.name() == "firmware")
+ {
+ if (!(foundName && foundVersion && foundPlatform && foundDevelopers && foundDevices && foundPit && foundRepartition && foundFiles))
+ return (false);
+ else
+ break;
+ }
+ }
+ else
+ {
+ if (!(nextToken == QXmlStreamReader::Characters && xml.isWhitespace()))
+ {
+ // TODO: "Unexpected token found in <firmware>"
+ return (false);
+ }
+ }
+ }
+
+ // Read whitespaces at the end of the file (if there are any)
+ xml.readNext();
+
+ if (!xml.atEnd())
+ {
+ // TODO: "Found data after </firmware>"
+ return (false);
+ }
+
+ return (true);
+}
diff --git a/heimdall-frontend/Source/FirmwareInfo.h b/heimdall-frontend/Source/FirmwareInfo.h
new file mode 100755
index 0000000..a72dab1
--- /dev/null
+++ b/heimdall-frontend/Source/FirmwareInfo.h
@@ -0,0 +1,286 @@
+/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+#ifndef FIRMWAREINFO_H
+#define FIRMWAREINFO_H
+
+// Qt
+#include <QFile>
+#include <QString>
+#include <QXmlStreamReader>
+
+namespace HeimdallFrontend
+{
+ class DeviceInfo
+ {
+ private:
+
+ QString manufacturer;
+ QString product;
+ QString name;
+
+ public:
+
+ DeviceInfo();
+ DeviceInfo(const QString& manufacturer, const QString& product, const QString& name);
+
+ bool ParseXml(QXmlStreamReader& xml);
+
+ const QString& GetManufacturer(void) const
+ {
+ return (manufacturer);
+ }
+
+ void SetManufacturer(const QString& manufacturer)
+ {
+ this->manufacturer = manufacturer;
+ }
+
+ const QString& GetProduct(void) const
+ {
+ return (product);
+ }
+
+ void SetProduct(const QString& product)
+ {
+ this->product = product;
+ }
+
+ const QString& GetName(void) const
+ {
+ return (name);
+ }
+
+ void SetName(const QString& name)
+ {
+ this->name = name;
+ }
+ };
+
+ class PlatformInfo
+ {
+ private:
+
+ QString name;
+ QString version;
+
+ public:
+
+ PlatformInfo();
+
+ void Clear(void);
+ bool IsCleared(void) const;
+
+ bool ParseXml(QXmlStreamReader& xml);
+
+ const QString& GetName(void) const
+ {
+ return (name);
+ }
+
+ void SetName(const QString& name)
+ {
+ this->name = name;
+ }
+
+ const QString& GetVersion(void) const
+ {
+ return (version);
+ }
+
+ void SetVersion(const QString& version)
+ {
+ this->version = version;
+ }
+ };
+
+ class FileInfo
+ {
+ private:
+
+ unsigned int partitionId;
+ QString filename;
+
+ public:
+
+ FileInfo();
+ FileInfo(unsigned int partitionId, const QString& filename);
+
+ bool ParseXml(QXmlStreamReader& xml);
+
+ unsigned int GetPartitionId(void) const
+ {
+ return (partitionId);
+ }
+
+ void SetPartitionId(unsigned int partitionId)
+ {
+ this->partitionId = partitionId;
+ }
+
+ const QString& GetFilename(void) const
+ {
+ return (filename);
+ }
+
+ void SetFilename(const QString& filename)
+ {
+ this->filename = filename;
+ }
+ };
+
+ class FirmwareInfo
+ {
+ public:
+
+ enum
+ {
+ kVersion = 1
+ };
+
+ private:
+
+ QString name;
+ QString version;
+ PlatformInfo platformInfo;
+
+ QList<QString> developers;
+ QString url;
+ QString donateUrl;
+
+ QList<DeviceInfo> deviceInfos;
+
+ QString pitFilename;
+ bool repartition;
+
+ QList<FileInfo> fileInfos;
+
+ public:
+
+ FirmwareInfo();
+
+ void Clear(void);
+ bool IsCleared(void) const;
+
+ bool ParseXml(QXmlStreamReader& xml);
+
+ const QString& GetName(void) const
+ {
+ return (name);
+ }
+
+ void SetName(const QString& name)
+ {
+ this->name = name;
+ }
+
+ const QString& GetVersion(void) const
+ {
+ return (version);
+ }
+
+ void SetVersion(const QString& version)
+ {
+ this->version = version;
+ }
+
+ const PlatformInfo& GetPlatformInfo(void) const
+ {
+ return (platformInfo);
+ }
+
+ PlatformInfo& GetPlatformInfo(void)
+ {
+ return (platformInfo);
+ }
+
+ const QList<QString>& GetDevelopers(void) const
+ {
+ return (developers);
+ }
+
+ QList<QString>& GetDevelopers(void)
+ {
+ return (developers);
+ }
+
+ const QString& GetUrl(void) const
+ {
+ return (url);
+ }
+
+ void SetUrl(const QString& url)
+ {
+ this->url = url;
+ }
+
+ const QString& GetDonateUrl(void) const
+ {
+ return (donateUrl);
+ }
+
+ void SetDonateUrl(const QString& donateUrl)
+ {
+ this->donateUrl = donateUrl;
+ }
+
+ const QList<DeviceInfo>& GetDeviceInfos(void) const
+ {
+ return (deviceInfos);
+ }
+
+ QList<DeviceInfo>& GetDeviceInfos(void)
+ {
+ return (deviceInfos);
+ }
+
+ const QString& GetPitFilename(void) const
+ {
+ return (pitFilename);
+ }
+
+ void SetPitFilename(const QString& pitFilename)
+ {
+ this->pitFilename = pitFilename;
+ }
+
+ bool GetRepartition(void) const
+ {
+ return (repartition);
+ }
+
+ void SetRepartition(bool repartition)
+ {
+ this->repartition = repartition;
+ }
+
+ const QList<FileInfo>& GetFileInfos(void) const
+ {
+ return (fileInfos);
+ }
+
+ QList<FileInfo>& GetFileInfos(void)
+ {
+ return (fileInfos);
+ }
+ };
+}
+
+#endif
diff --git a/heimdall-frontend/Source/PackageData.cpp b/heimdall-frontend/Source/PackageData.cpp
new file mode 100755
index 0000000..36138cf
--- /dev/null
+++ b/heimdall-frontend/Source/PackageData.cpp
@@ -0,0 +1,65 @@
+/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+// Heimdall Frontend
+#include "PackageData.h"
+
+using namespace HeimdallFrontend;
+
+PackageData::PackageData()
+{
+}
+
+PackageData::~PackageData()
+{
+ for (int i = 0; i < files.length(); i++)
+ delete files[i];
+}
+
+void PackageData::Clear(void)
+{
+ firmwareInfo.Clear();
+
+ for (int i = 0; i < files.length(); i++)
+ delete files[i];
+
+ files.clear();
+}
+
+bool PackageData::ReadFirmwareInfo(QFile *file)
+{
+ if (!file->open(QFile::ReadOnly))
+ {
+ // TODO: Error
+ return (false);
+ }
+
+ QXmlStreamReader xml(file);
+ bool success = firmwareInfo.ParseXml(xml);
+
+ file->close();
+
+ return (success);
+}
+
+bool PackageData::IsCleared(void) const
+{
+ return (firmwareInfo.IsCleared() && files.isEmpty());
+}
diff --git a/heimdall-frontend/Source/PackageData.h b/heimdall-frontend/Source/PackageData.h
new file mode 100755
index 0000000..9952393
--- /dev/null
+++ b/heimdall-frontend/Source/PackageData.h
@@ -0,0 +1,77 @@
+/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+#ifndef PACKAGEDATA_H
+#define PACKAGEDATA_H
+
+// Qt
+#include <QTemporaryFile>
+
+// Heimdall Frontend
+#include "FirmwareInfo.h"
+
+namespace HeimdallFrontend
+{
+ class PackageData
+ {
+ private:
+
+ FirmwareInfo firmwareInfo;
+ QList<QTemporaryFile *> files;
+
+ public:
+
+ PackageData();
+ ~PackageData();
+
+ void Clear(void);
+ bool ReadFirmwareInfo(QFile *file);
+
+ bool IsCleared(void) const;
+
+ const FirmwareInfo& GetFirmwareInfo(void) const
+ {
+ return (firmwareInfo);
+ }
+
+ FirmwareInfo& GetFirmwareInfo(void)
+ {
+ return (firmwareInfo);
+ }
+
+ const QList<QTemporaryFile *>& GetFiles(void) const
+ {
+ return (files);
+ }
+
+ QList<QTemporaryFile *>& GetFiles(void)
+ {
+ return (files);
+ }
+
+ // Simply clears the files list, it does delete/close any files.
+ void RemoveAllFiles(void)
+ {
+ files.clear();
+ }
+ };
+}
+
+#endif
diff --git a/heimdall-frontend/Source/Packaging.cpp b/heimdall-frontend/Source/Packaging.cpp
new file mode 100755
index 0000000..cbd03a4
--- /dev/null
+++ b/heimdall-frontend/Source/Packaging.cpp
@@ -0,0 +1,345 @@
+/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+// C/C++ Standard Library
+#include <stdio.h>
+
+// zlib
+#include "zlib.h"
+
+// Qt
+#include <QDateTime>
+#include <QDir>
+
+// Heimdall Frontend
+#include "Packaging.h"
+
+using namespace HeimdallFrontend;
+
+const char *Packaging::ustarMagic = "ustar";
+
+bool Packaging::ExtractTar(QTemporaryFile& tarFile, PackageData *outputPackageData)
+{
+ TarHeader tarHeader;
+
+ tarFile.reset();
+
+ bool previousEmpty = false;
+
+ while (!tarFile.atEnd())
+ {
+ qint64 dataRead = tarFile.read(tarHeader.buffer, TarHeader::kBlockLength);
+
+ if (dataRead != TarHeader::kBlockLength)
+ return (false);
+
+ bool ustarFormat = strcmp(tarHeader.fields.magic, ustarMagic) == 0;
+ bool empty = true;
+
+ for (int i = 0; i < TarHeader::kBlockLength; i++)
+ {
+ if (tarHeader.buffer[i] != 0)
+ {
+ empty = false;
+ break;
+ }
+ }
+
+ if (empty)
+ {
+ if (previousEmpty)
+ {
+ // Two empty blocks in a row means we've reached the end of the archive.
+ // TODO: Make sure we're at the end of the file.
+ break;
+ }
+ }
+ else
+ {
+ // TODO: Check checksum
+
+ bool parsed = false;
+
+ // The size field is not always null terminated, so we must create a copy and null terminate it for parsing.
+ char fileSizeString[13];
+ memcpy(fileSizeString, tarHeader.fields.size, 12);
+ fileSizeString[12] = '\0';
+
+ qulonglong fileSize = QString(fileSizeString).toULongLong(&parsed, 8);
+
+ if (!parsed)
+ {
+ // TODO: Error message?
+ return (false);
+ }
+
+ if (fileSize > 0 && tarHeader.fields.typeFlag == '0')
+ {
+ // We're working with a file.
+ QString filename = QString::fromUtf8(tarHeader.fields.name);
+
+ // This is slightly pointless as we don't support directories...
+ if (ustarFormat)
+ filename.prepend(tarHeader.fields.prefix);
+
+ QTemporaryFile *outputFile = new QTemporaryFile("XXXXXX-" + filename);
+ outputFile->open();
+
+ outputPackageData->GetFiles().append(outputFile);
+
+ qulonglong dataRemaining = fileSize;
+ char readBuffer[TarHeader::kBlockReadCount * TarHeader::kBlockLength];
+
+ // Copy the file contents from tarFile to outputFile
+ while (dataRemaining > 0)
+ {
+ qint64 fileDataToRead = (dataRemaining < TarHeader::kBlockReadCount * TarHeader::kBlockLength)
+ ? dataRemaining : TarHeader::kBlockReadCount * TarHeader::kBlockLength;
+
+ qint64 dataRead = tarFile.read(readBuffer, fileDataToRead + (TarHeader::kBlockLength - fileDataToRead % TarHeader::kBlockLength) % TarHeader::kBlockLength);
+
+ if (dataRead < fileDataToRead || dataRead % TarHeader::kBlockLength != 0)
+ return (false);
+
+ outputFile->write(readBuffer, fileDataToRead);
+
+ dataRemaining -= fileDataToRead;
+ }
+
+ outputFile->close();
+ }
+ else
+ {
+ // We don't support links/directories.
+ return (false);
+ }
+ }
+
+ previousEmpty = empty;
+ }
+
+ return (true);
+}
+
+bool Packaging::CreateTar(const PackageData& packageData, QTemporaryFile *outputTarFile)
+{
+ const QList<FileInfo>& fileInfos = packageData.GetFirmwareInfo().GetFileInfos();
+
+ if (!outputTarFile->open())
+ {
+ // TODO: "Failed to open \"%s\""
+ return (false);
+ }
+
+ bool failure = false;
+
+ TarHeader tarHeader;
+
+ for (int i = 0; i < fileInfos.length(); i++)
+ {
+ memset(tarHeader.buffer, 0, TarHeader::kBlockLength);
+
+ QFile file(fileInfos[i].GetFilename());
+
+ if (!file.open(QFile::ReadOnly))
+ {
+ // TODO: "Failed to open \"%s\""
+ failure = true;
+ break;
+ }
+
+ if (file.size() > TarHeader::kMaxFileSize)
+ {
+ // TODO: "File is too large to packaged"
+ failure = true;
+ break;
+ }
+
+ QFileInfo qtFileInfo(file);
+ strcpy(tarHeader.fields.name, qtFileInfo.fileName().toUtf8().constData());
+
+ unsigned int mode = 0;
+
+ QFile::Permissions permissions = file.permissions();
+
+ // Other
+ if (permissions.testFlag(QFile::ExeOther))
+ mode |= TarHeader::kModeOtherExecute;
+ if (permissions.testFlag(QFile::WriteOther))
+ mode |= TarHeader::kModeOtherWrite;
+ if (permissions.testFlag(QFile::ReadOther))
+ mode |= TarHeader::kModeOtherRead;
+
+ // Group
+ if (permissions.testFlag(QFile::ExeGroup))
+ mode |= TarHeader::kModeGroupExecute;
+ if (permissions.testFlag(QFile::WriteGroup))
+ mode |= TarHeader::kModeGroupWrite;
+ if (permissions.testFlag(QFile::ReadGroup))
+ mode |= TarHeader::kModeGroupRead;
+
+ // Owner
+ if (permissions.testFlag(QFile::ExeOwner))
+ mode |= TarHeader::kModeOwnerExecute;
+ if (permissions.testFlag(QFile::WriteOwner))
+ mode |= TarHeader::kModeOwnerWrite;
+ if (permissions.testFlag(QFile::ReadOwner))
+ mode |= TarHeader::kModeOwnerRead;
+
+ sprintf(tarHeader.fields.mode, "%o", mode);
+
+ sprintf(tarHeader.fields.userId, "%o", qtFileInfo.ownerId());
+ sprintf(tarHeader.fields.groupId, "%o", qtFileInfo.groupId());
+
+ // Note: We don't support base-256 encoding. Support could be added in future.
+ sprintf(tarHeader.fields.size, "%o", file.size());
+
+ sprintf(tarHeader.fields.modifiedTime, "%o", qtFileInfo.lastModified().toMSecsSinceEpoch());
+
+ // Regular File
+ tarHeader.fields.typeFlag = '0';
+
+ // Calculate checksum
+ int checksum = 0;
+
+ for (int i = 0; i < TarHeader::kTarHeaderLength; i++)
+ checksum += tarHeader.buffer[i];
+
+ sprintf(tarHeader.fields.checksum, "%o", checksum);
+
+ // Write the header to the TAR file.
+ outputTarFile->write(tarHeader.buffer, TarHeader::kBlockLength);
+
+ char buffer[TarHeader::kBlockWriteCount * TarHeader::kBlockLength];
+
+ for (qint64 i = 0; i < file.size(); i++)
+ {
+ qint64 dataRead = file.read(buffer, TarHeader::kBlockWriteCount * TarHeader::kBlockLength);
+
+ if (outputTarFile->write(buffer, dataRead) != dataRead)
+ {
+ // TODO: "Failed to write data to the temporary TAR file."
+ failure = true;
+ break;
+ }
+
+ if (dataRead % TarHeader::kBlockLength != 0)
+ {
+ int remainingBlockLength = TarHeader::kBlockLength - dataRead % TarHeader::kBlockLength;
+ memset(buffer, 0, remainingBlockLength);
+
+ if (outputTarFile->write(buffer, remainingBlockLength) != remainingBlockLength)
+ {
+ // TODO: "Failed to write data to the temporary TAR file."
+ failure = true;
+ break;
+ }
+ }
+
+ i += dataRead;
+ }
+
+ if (failure)
+ break;
+ }
+
+ if (failure)
+ {
+ outputTarFile->resize(0);
+ outputTarFile->close();
+ return (false);
+ }
+
+ // Write two empty blocks to signify the end of the archive.
+ memset(tarHeader.buffer, 0, TarHeader::kBlockLength);
+ outputTarFile->write(tarHeader.buffer, TarHeader::kBlockLength);
+ outputTarFile->write(tarHeader.buffer, TarHeader::kBlockLength);
+
+ outputTarFile->close();
+
+ return (true);
+}
+
+bool Packaging::ExtractPackage(const QString& packagePath, PackageData *outputPackageData)
+{
+ FILE *compressedPackageFile = fopen(packagePath.toStdString().c_str(), "rb");
+ gzFile packageFile = gzdopen(fileno(compressedPackageFile), "rb");
+
+ QTemporaryFile outputTar("XXXXXX.tar");
+
+ if (!outputTar.open())
+ {
+ gzclose(packageFile);
+
+ return (false);
+ }
+
+ char buffer[32768];
+
+ int bytesRead;
+
+ do
+ {
+ bytesRead = gzread(packageFile, buffer, 32768);
+
+ if (bytesRead == -1)
+ {
+ gzclose(packageFile);
+
+ return (false);
+ }
+
+ outputTar.write(buffer, bytesRead);
+ } while (bytesRead > 0);
+
+ gzclose(packageFile); // Closes packageFile and compressedPackageFile
+
+ if (!ExtractTar(outputTar, outputPackageData))
+ return (false);
+
+ // Find and read firmware.xml
+ for (int i = 0; i < outputPackageData->GetFiles().length(); i++)
+ {
+ QTemporaryFile *file = outputPackageData->GetFiles()[i];
+
+ if (file->fileTemplate() == "XXXXXX-firmware.xml")
+ {
+ if (!outputPackageData->ReadFirmwareInfo(file))
+ {
+ outputPackageData->Clear();
+ return (false);
+ }
+
+ return (true);
+ }
+ }
+
+ return (false);
+}
+
+bool Packaging::BuildPackage(const QString& packagePath, const PackageData& packageData)
+{
+ QTemporaryFile temporaryFile("XXXXXX.tar");
+
+ if (!CreateTar(packageData, &temporaryFile))
+ return (false);
+
+ return (true);
+}
diff --git a/heimdall-frontend/Source/Packaging.h b/heimdall-frontend/Source/Packaging.h
new file mode 100755
index 0000000..c341f0f
--- /dev/null
+++ b/heimdall-frontend/Source/Packaging.h
@@ -0,0 +1,110 @@
+/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+#ifndef PACKAGING_H
+#define PACKAGING_H
+
+// Qt
+#include <QList>
+#include <QString>
+#include <QTemporaryFile>
+
+// Heimdall Frontend
+#include "PackageData.h"
+
+namespace HeimdallFrontend
+{
+ union TarHeader
+ {
+ enum
+ {
+ kBlockLength = 512,
+ kBlockReadCount = 8,
+ kBlockWriteCount = 8,
+
+ kTarHeaderLength = 257,
+ kUstarHeaderLength = 500,
+ };
+
+ enum : quint64
+ {
+ kMaxFileSize = 8589934592
+ };
+
+ enum
+ {
+ kModeOtherExecute = 1,
+ kModeOtherWrite = 1 << 1,
+ kModeOtherRead = 1 << 2,
+
+ kModeGroupExecute = 1 << 3,
+ kModeGroupWrite = 1 << 4,
+ kModeGroupRead = 1 << 5,
+
+ kModeOwnerExecute = 1 << 6,
+ kModeOwnerWrite = 1 << 7,
+ kModeOwnerRead = 1 << 8,
+
+ kModeReserved = 2 << 9,
+ kModeSetGid = 2 << 10,
+ kModeSetUid = 2 << 11
+ };
+
+ struct
+ {
+ char name[100];
+ char mode[8];
+ char userId[8];
+ char groupId[8];
+ char size[12];
+ char modifiedTime[12];
+ char checksum[8];
+ char typeFlag;
+ char linkName[100];
+ char magic[6];
+ char version[2];
+ char userName[32];
+ char groupName[32];
+ char devMajor[8];
+ char devMinor[8];
+ char prefix[155];
+ } fields;
+
+ char buffer[kBlockLength];
+ };
+
+ class Packaging
+ {
+ private:
+
+ // TODO: Add support for sparse files to both methods.
+ static bool ExtractTar(QTemporaryFile& tarFile, PackageData *outputPackageData);
+ static bool CreateTar(const PackageData& packageData, QTemporaryFile *outputTarFile); // Uses original TAR format.
+
+ public:
+
+ static const char *ustarMagic;
+
+ static bool ExtractPackage(const QString& packagePath, PackageData *outputPackageData);
+ static bool BuildPackage(const QString& packagePath, const PackageData& packageData);
+ };
+}
+
+#endif
diff --git a/heimdall-frontend/Source/aboutform.cpp b/heimdall-frontend/Source/aboutform.cpp
index f043c20..08b8a3e 100644
--- a/heimdall-frontend/Source/aboutform.cpp
+++ b/heimdall-frontend/Source/aboutform.cpp
@@ -18,7 +18,7 @@
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.*/
-// Heimdall
+// Heimdall Frontend
#include "aboutform.h"
using namespace HeimdallFrontend;
diff --git a/heimdall-frontend/Source/aboutform.h b/heimdall-frontend/Source/aboutform.h
index 2a44c95..7e29136 100644
--- a/heimdall-frontend/Source/aboutform.h
+++ b/heimdall-frontend/Source/aboutform.h
@@ -18,12 +18,12 @@
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.*/
-// Heimdall
-#include "ui_aboutform.h"
-
// Qt
#include <QWidget>
+// Heimdall Frontend
+#include "ui_aboutform.h"
+
namespace HeimdallFrontend
{
class AboutForm : public QWidget, public Ui::AboutForm
diff --git a/heimdall-frontend/Source/main.cpp b/heimdall-frontend/Source/main.cpp
index 8df987c..9db00f5 100644
--- a/heimdall-frontend/Source/main.cpp
+++ b/heimdall-frontend/Source/main.cpp
@@ -18,20 +18,20 @@
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.*/
-// Heimdall Frontend
-#include "mainwindow.h"
-
// Qt
#include <QtGui/QApplication>
+// Heimdall Frontend
+#include "mainwindow.h"
+
using namespace HeimdallFrontend;
int main(int argc, char *argv[])
{
- QApplication a(argc, argv);
+ QApplication application(argc, argv);
- MainWindow w;
- w.show();
+ MainWindow window;
+ window.show();
- return a.exec();
+ return (application.exec());
}
diff --git a/heimdall-frontend/Source/mainwindow.cpp b/heimdall-frontend/Source/mainwindow.cpp
index b5287e2..8043599 100644
--- a/heimdall-frontend/Source/mainwindow.cpp
+++ b/heimdall-frontend/Source/mainwindow.cpp
@@ -18,9 +18,6 @@
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.*/
-// Heimdall Frontend
-#include "mainwindow.h"
-
// Qt
#include <QCoreApplication>
#include <QDesktopServices>
@@ -30,151 +27,214 @@
#include <QRegExp>
#include <QUrl>
+// Heimdall Frontend
+#include "mainwindow.h"
+#include "Packaging.h"
+
using namespace HeimdallFrontend;
-bool MainWindow::IsArchive(QString path)
+void MainWindow::UpdateUnusedPartitionIds(void)
{
- // Not a real check but hopefully it gets the message across, don't flash archives!
- return (path.endsWith(".tar", Qt::CaseInsensitive) || path.endsWith(".gz", Qt::CaseInsensitive) || path.endsWith(".zip", Qt::CaseInsensitive)
- || path.endsWith(".bz2", Qt::CaseInsensitive) || path.endsWith(".7z", Qt::CaseInsensitive) || path.endsWith(".rar", Qt::CaseInsensitive));
+ unusedPartitionIds.clear();
+
+ // Initially populate unusedPartitionIds with all possible partition IDs.
+ for (unsigned int i = 0; i < currentPitData.GetEntryCount(); i++)
+ {
+ const PitEntry *pitEntry = currentPitData.GetEntry(i);
+
+ if (!pitEntry->GetUnused() && strcmp(pitEntry->GetPartitionName(), "PIT") != 0)
+ unusedPartitionIds.append(pitEntry->GetPartitionIdentifier());
+ }
+
+ // Remove any used partition IDs from unusedPartitionIds
+ QList<FileInfo>& fileList = workingPackageData.GetFirmwareInfo().GetFileInfos();
+
+ for (int i = 0; i < fileList.length(); i++)
+ unusedPartitionIds.removeOne(fileList[i].GetPartitionId());
}
-QString MainWindow::PromptFileSelection(void)
+bool MainWindow::ReadPit(QFile *file)
{
- QString path = QFileDialog::getOpenFileName(this, "Select File", lastDirectory);
+ if(!file->open(QIODevice::ReadOnly))
+ return (false);
- if (path != "")
- lastDirectory = path.left(path.lastIndexOf('/') + 1);
+ unsigned char *buffer = new unsigned char[file->size()];
- return (path);
+ file->read(reinterpret_cast<char *>(buffer), file->size());
+ file->close();
+
+ bool success = currentPitData.Unpack(buffer);
+ delete buffer;
+
+ if (!success)
+ currentPitData.Clear();
+
+ return (success);
}
-void MainWindow::UpdateStartButton(void)
+void MainWindow::UpdatePackageUserInterface(void)
{
- if (heimdallRunning)
+ supportedDevicesListWidget->clear();
+ includedFilesListWidget->clear();
+
+ if (loadedPackageData.IsCleared())
{
- startFlashButton->setEnabled(false);
- return;
- }
+ // Package Interface
+ firmwareNameLineEdit->clear();
+ versionLineEdit->clear();
- if (repartitionCheckBox->isChecked())
+ developerNamesLineEdit->clear();
+
+ platformLineEdit->clear();
+
+ developerHomepageButton->setEnabled(false);
+ developerDonateButton->setEnabled(false);
+
+ repartitionRadioButton->setChecked(false);
+
+ loadFirmwareButton->setEnabled(false);
+ }
+ else
{
- if (!IsArchive(pitLineEdit->text()) && factoryfsCheckBox->isChecked() && !IsArchive(factoryfsLineEdit->text()) && kernelCheckBox->isChecked()
- && !IsArchive(kernelLineEdit->text()) && paramCheckBox->isChecked() && !IsArchive(paramLineEdit->text())
- && primaryBootCheckBox->isChecked() && !IsArchive(primaryBootLineEdit->text()) && secondaryBootCheckBox->isChecked()
- && !IsArchive(secondaryBootLineEdit->text()) && modemCheckBox->isChecked() && !IsArchive(modemLineEdit->text()))
+ firmwareNameLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetName());
+ versionLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetVersion());
+
+ QString developerNames;
+
+ if (!loadedPackageData.GetFirmwareInfo().GetDevelopers().isEmpty())
{
- startFlashButton->setEnabled(true);
+ developerNames = loadedPackageData.GetFirmwareInfo().GetDevelopers()[0];
+ for (int i = 1; i < loadedPackageData.GetFirmwareInfo().GetDevelopers().length(); i++)
+ developerNames += ", " + loadedPackageData.GetFirmwareInfo().GetDevelopers()[i];
}
+
+ developerNamesLineEdit->setText(developerNames);
+
+ platformLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetPlatformInfo().GetName() + " ("
+ + loadedPackageData.GetFirmwareInfo().GetPlatformInfo().GetVersion() + ")");
+
+ if (!loadedPackageData.GetFirmwareInfo().GetUrl().isEmpty())
+ developerHomepageButton->setEnabled(true);
else
+ developerHomepageButton->setEnabled(false);
+
+ if (!loadedPackageData.GetFirmwareInfo().GetDonateUrl().isEmpty())
+ developerDonateButton->setEnabled(true);
+ else
+ developerDonateButton->setEnabled(false);
+
+ for (int i = 0; i < loadedPackageData.GetFirmwareInfo().GetDeviceInfos().length(); i++)
{
- startFlashButton->setEnabled(false);
+ const DeviceInfo& deviceInfo = loadedPackageData.GetFirmwareInfo().GetDeviceInfos()[i];
+ supportedDevicesListWidget->addItem(deviceInfo.GetManufacturer() + " " + deviceInfo.GetName() + " (" + deviceInfo.GetProduct() + ")");
}
- }
- else
- {
- bool atLeastOneFile = false;
- if (factoryfsCheckBox->isChecked())
+ for (int i = 0; i < loadedPackageData.GetFirmwareInfo().GetFileInfos().length(); i++)
{
- atLeastOneFile = true;
-
- if (IsArchive(factoryfsLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
+ const FileInfo& fileInfo = loadedPackageData.GetFirmwareInfo().GetFileInfos()[i];
+ includedFilesListWidget->addItem(fileInfo.GetFilename());
}
- if (kernelCheckBox->isChecked())
- {
- atLeastOneFile = true;
+ repartitionRadioButton->setChecked(loadedPackageData.GetFirmwareInfo().GetRepartition());
- if (IsArchive(kernelLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
- }
+ loadFirmwareButton->setEnabled(true);
+ }
+}
- if (paramCheckBox->isChecked())
- {
- atLeastOneFile = true;
+bool MainWindow::IsArchive(QString path)
+{
+ // Not a real check but hopefully it gets the message across, don't flash archives!
+ return (path.endsWith(".tar", Qt::CaseInsensitive) || path.endsWith(".gz", Qt::CaseInsensitive) || path.endsWith(".zip", Qt::CaseInsensitive)
+ || path.endsWith(".bz2", Qt::CaseInsensitive) || path.endsWith(".7z", Qt::CaseInsensitive) || path.endsWith(".rar", Qt::CaseInsensitive));
+}
- if (IsArchive(paramLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
- }
+QString MainWindow::PromptFileSelection(void)
+{
+ QString path = QFileDialog::getOpenFileName(this, "Select File", lastDirectory);
- if (primaryBootCheckBox->isChecked())
- {
- atLeastOneFile = true;
+ if (path != "")
+ lastDirectory = path.left(path.lastIndexOf('/') + 1);
- if (IsArchive(primaryBootLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
- }
+ return (path);
+}
- if (secondaryBootCheckBox->isChecked())
- {
- atLeastOneFile = true;
+QString MainWindow::PromptFileCreation(void)
+{
+ QString path = QFileDialog::getSaveFileName(this, "Save File", lastDirectory);
- if (IsArchive(secondaryBootLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
- }
+ if (path != "")
+ lastDirectory = path.left(path.lastIndexOf('/') + 1);
- if (cacheCheckBox->isChecked())
- {
- atLeastOneFile = true;
+ return (path);
+}
- if (IsArchive(cacheLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
- }
+void MainWindow::UpdatePartitionNamesInterface(void)
+{
+ populatingPartitionNames = true;
- if (databaseCheckBox->isChecked())
- {
- atLeastOneFile = true;
+ partitionNameComboBox->clear();
- if (IsArchive(databaseLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
- }
+ int partitionsListWidgetRow = partitionsListWidget->currentRow();
- if (modemCheckBox->isChecked())
- {
- atLeastOneFile = true;
+ if (partitionsListWidgetRow >= 0)
+ {
+ const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()];
- if (IsArchive(modemLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
- }
+ for (int i = 0; i < unusedPartitionIds.length(); i++)
+ partitionNameComboBox->addItem(currentPitData.FindEntry(unusedPartitionIds[i])->GetPartitionName());
- if (recoveryCheckBox->isChecked())
- {
- atLeastOneFile = true;
+ partitionNameComboBox->addItem(currentPitData.FindEntry(partitionInfo.GetPartitionId())->GetPartitionName());
+ partitionNameComboBox->setCurrentIndex(unusedPartitionIds.length());
- if (IsArchive(recoveryLineEdit->text()))
- {
- startFlashButton->setEnabled(false);
- return;
- }
+ partitionNameComboBox->setEnabled(true);
+ }
+ else
+ {
+ partitionNameComboBox->setEnabled(false);
+ }
+
+ populatingPartitionNames = false;
+}
+
+void MainWindow::UpdateStartButton(void)
+{
+ if (heimdallRunning)
+ {
+ startFlashButton->setEnabled(false);
+ return;
+ }
+
+ bool allPartitionsValid = true;
+
+ QList<FileInfo>& fileList = workingPackageData.GetFirmwareInfo().GetFileInfos();
+
+ for (int i = 0; i < fileList.length(); i++)
+ {
+ if (fileList[i].GetFilename().isEmpty())
+ {
+ allPartitionsValid = false;
+ break;
}
+ }
+
+ bool validSettings = allPartitionsValid && fileList.length() > 0;
- startFlashButton->setEnabled(atLeastOneFile);
+ startFlashButton->setEnabled(validSettings);
+ functionTabWidget->setTabEnabled(functionTabWidget->indexOf(createPackageTab), validSettings);
+}
+
+void MainWindow::UpdateBuildPackageButton(void)
+{
+ const FirmwareInfo& firmwareInfo = workingPackageData.GetFirmwareInfo();
+
+ if (firmwareInfo.GetName().isEmpty() || firmwareInfo.GetVersion().isEmpty() || firmwareInfo.GetPlatformInfo().GetName().isEmpty()
+ || firmwareInfo.GetPlatformInfo().GetVersion().isEmpty() || firmwareInfo.GetDevelopers().isEmpty() || firmwareInfo.GetDeviceInfos().isEmpty())
+ {
+ buildPackageButton->setEnabled(false);
+ }
+ else
+ {
+ buildPackageButton->setEnabled(true);
}
}
@@ -186,33 +246,52 @@ MainWindow::MainWindow(QWidget *parent) : QMainWindow(parent)
lastDirectory = QDir::toNativeSeparators(QApplication::applicationDirPath());
+ populatingPartitionNames = false;
+
+ functionTabWidget->setTabEnabled(functionTabWidget->indexOf(createPackageTab), false);
+
QObject::connect(actionDonate, SIGNAL(triggered()), this, SLOT(OpenDonationWebpage()));
QObject::connect(actionAboutHeimdall, SIGNAL(triggered()), this, SLOT(ShowAbout()));
+ QObject::connect(browseFirmwarePackageButton, SIGNAL(clicked()), this, SLOT(SelectFirmwarePackage()));
+ QObject::connect(developerHomepageButton, SIGNAL(clicked()), this, SLOT(OpenDeveloperHomepage()));
+ QObject::connect(developerDonateButton, SIGNAL(clicked()), this, SLOT(OpenDeveloperDonationWebpage()));
+ QObject::connect(loadFirmwareButton, SIGNAL(clicked()), this, SLOT(LoadFirmwarePackage()));
+
+ QObject::connect(partitionsListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectPartition(int)));
+ QObject::connect(addPartitionButton, SIGNAL(clicked()), this, SLOT(AddPartition()));
+ QObject::connect(removePartitionButton, SIGNAL(clicked()), this, SLOT(RemovePartition()));
+
+ QObject::connect(partitionNameComboBox, SIGNAL(currentIndexChanged(int)), this, SLOT(SelectPartitionName(int)));
+ QObject::connect(partitionFileBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPartitionFile()));
+
QObject::connect(pitBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPit()));
- QObject::connect(factoryfsBrowseButton, SIGNAL(clicked()), this, SLOT(SelectFactoryfs()));
- QObject::connect(kernelBrowseButton, SIGNAL(clicked()), this, SLOT(SelectKernel()));
- QObject::connect(paramBrowseButton, SIGNAL(clicked()), this, SLOT(SelectParam()));
- QObject::connect(primaryBootBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPrimaryBootloader()));
- QObject::connect(secondaryBootBrowseButton, SIGNAL(clicked()), this, SLOT(SelectSecondaryBootloader()));
- QObject::connect(cacheBrowseButton, SIGNAL(clicked()), this, SLOT(SelectCache()));
- QObject::connect(databaseBrowseButton, SIGNAL(clicked()), this, SLOT(SelectDatabase()));
- QObject::connect(modemBrowseButton, SIGNAL(clicked()), this, SLOT(SelectModem()));
- QObject::connect(recoveryBrowseButton, SIGNAL(clicked()), this, SLOT(SelectRecovery()));
-
- QObject::connect(repartitionCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetRepartionEnabled(int)));
- QObject::connect(factoryfsCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetFactoryfsEnabled(int)));
- QObject::connect(kernelCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetKernelEnabled(int)));
- QObject::connect(paramCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetParamEnabled(int)));
- QObject::connect(primaryBootCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetPrimaryBootloaderEnabled(int)));
- QObject::connect(secondaryBootCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetSecondaryBootloaderEnabled(int)));
- QObject::connect(cacheCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetCacheEnabled(int)));
- QObject::connect(databaseCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetDatabaseEnabled(int)));
- QObject::connect(modemCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetModemEnabled(int)));
- QObject::connect(recoveryCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetRecoveryEnabled(int)));
+ QObject::connect(repartitionCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetRepartition(int)));
QObject::connect(startFlashButton, SIGNAL(clicked()), this, SLOT(StartFlash()));
+ QObject::connect(createFirmwareNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(FirmwareNameChanged(const QString&)));
+ QObject::connect(createFirmwareVersionLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(FirmwareVersionChanged(const QString&)));
+ QObject::connect(createPlatformNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(PlatformNameChanged(const QString&)));
+ QObject::connect(createPlatformVersionLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(PlatformVersionChanged(const QString&)));
+
+ QObject::connect(createHomepageLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(HomepageUrlChanged(const QString&)));
+ QObject::connect(createDonateLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DonateUrlChanged(const QString&)));
+
+ QObject::connect(createDevelopersListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectDeveloper(int)));
+ QObject::connect(createDeveloperNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeveloperNameChanged(const QString&)));
+ QObject::connect(addDeveloperButton, SIGNAL(clicked()), this, SLOT(AddDeveloper()));
+ QObject::connect(removeDeveloperButton, SIGNAL(clicked()), this, SLOT(RemoveDeveloper()));
+
+ QObject::connect(createDevicesListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectDevice(int)));
+ QObject::connect(deviceManufacturerLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
+ QObject::connect(deviceNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
+ QObject::connect(deviceProductCodeLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
+ QObject::connect(addDeviceButton, SIGNAL(clicked()), this, SLOT(AddDevice()));
+ QObject::connect(removeDeviceButton, SIGNAL(clicked()), this, SLOT(RemoveDevice()));
+
+ QObject::connect(buildPackageButton, SIGNAL(clicked()), this, SLOT(BuildPackage()));
+
QObject::connect(&process, SIGNAL(readyRead()), this, SLOT(HandleHeimdallStdout()));
QObject::connect(&process, SIGNAL(finished(int, QProcess::ExitStatus)), this, SLOT(HandleHeimdallReturned(int, QProcess::ExitStatus)));
QObject::connect(&process, SIGNAL(error(QProcess::ProcessError)), this, SLOT(HandleHeimdallError(QProcess::ProcessError)));
@@ -232,284 +311,314 @@ void MainWindow::ShowAbout(void)
aboutForm.show();
}
-void MainWindow::SelectPit(void)
+void MainWindow::SelectFirmwarePackage(void)
{
+ loadedPackageData.Clear();
+ UpdatePackageUserInterface();
+
QString path = PromptFileSelection();
- pitLineEdit->setText(path);
+ firmwarePackageLineEdit->setText(path);
- SetRepartionEnabled(path != "");
+ if (firmwarePackageLineEdit->text() != "")
+ {
+ if (Packaging::ExtractPackage(firmwarePackageLineEdit->text(), &loadedPackageData))
+ {
+ UpdatePackageUserInterface();
+ }
+ else
+ {
+ // TODO: Error?
+ loadedPackageData.Clear();
+ }
+ }
}
-void MainWindow::SelectFactoryfs(void)
+void MainWindow::OpenDeveloperHomepage(void)
{
- QString path = PromptFileSelection();
- factoryfsLineEdit->setText(path);
-
- SetFactoryfsEnabled(path != "");
+ QDesktopServices::openUrl(QUrl(loadedPackageData.GetFirmwareInfo().GetUrl(), QUrl::TolerantMode));
}
-void MainWindow::SelectKernel(void)
+void MainWindow::OpenDeveloperDonationWebpage(void)
{
- QString path = PromptFileSelection();
- kernelLineEdit->setText(path);
-
- SetKernelEnabled(path != "");
+ QDesktopServices::openUrl(QUrl(loadedPackageData.GetFirmwareInfo().GetDonateUrl(), QUrl::TolerantMode));
}
-void MainWindow::SelectParam(void)
+void MainWindow::LoadFirmwarePackage(void)
{
- QString path = PromptFileSelection();
- paramLineEdit->setText(path);
+ workingPackageData.Clear();
+ currentPitData.Clear();
+
+ // Make flashSettings responsible for the temporary files
+ workingPackageData.GetFiles().append(loadedPackageData.GetFiles());
+ loadedPackageData.RemoveAllFiles();
- SetParamEnabled(path != "");
-}
+ const QList<FileInfo> packageFileInfos = loadedPackageData.GetFirmwareInfo().GetFileInfos();
-void MainWindow::SelectPrimaryBootloader(void)
-{
- QString path = PromptFileSelection();
- primaryBootLineEdit->setText(path);
+ for (int i = 0; i < packageFileInfos.length(); i++)
+ {
+ for (int j = 0; j < workingPackageData.GetFiles().length(); j++)
+ {
+ if (workingPackageData.GetFiles()[j]->fileTemplate() == ("XXXXXX-" + packageFileInfos[i].GetFilename()))
+ {
+ FileInfo partitionInfo(packageFileInfos[i].GetPartitionId(), QDir::current().absoluteFilePath(workingPackageData.GetFiles()[j]->fileName()));
+ workingPackageData.GetFirmwareInfo().GetFileInfos().append(partitionInfo);
- SetPrimaryBootloaderEnabled(path != "");
-}
+ break;
+ }
+ }
+ }
-void MainWindow::SelectSecondaryBootloader(void)
-{
- QString path = PromptFileSelection();
- secondaryBootLineEdit->setText(path);
+ // Find the PIT file and read it
+ for (int i = 0; i < workingPackageData.GetFiles().length(); i++)
+ {
+ QTemporaryFile *file = workingPackageData.GetFiles()[i];
- SetSecondaryBootloaderEnabled(path != "");
-}
+ if (file->fileTemplate() == ("XXXXXX-" + loadedPackageData.GetFirmwareInfo().GetPitFilename()))
+ {
+ workingPackageData.GetFirmwareInfo().SetPitFilename(QDir::current().absoluteFilePath(file->fileName()));
-void MainWindow::SelectCache(void)
-{
- QString path = PromptFileSelection();
- cacheLineEdit->setText(path);
+ if (!ReadPit(file))
+ {
+ // TODO: Error
+ loadedPackageData.Clear();
+ UpdatePackageUserInterface();
- SetCacheEnabled(path != "");
-}
+ workingPackageData.Clear();
+ UpdateUnusedPartitionIds();
+ return;
+ }
-void MainWindow::SelectDatabase(void)
-{
- QString path = PromptFileSelection();
- databaseLineEdit->setText(path);
+ break;
+ }
+ }
- SetDatabaseEnabled(path != "");
-}
+ UpdateUnusedPartitionIds();
+ workingPackageData.GetFirmwareInfo().SetRepartition(loadedPackageData.GetFirmwareInfo().GetRepartition());
-void MainWindow::SelectModem(void)
-{
- QString path = PromptFileSelection();
- modemLineEdit->setText(path);
+ loadedPackageData.Clear();
+ UpdatePackageUserInterface();
+ firmwarePackageLineEdit->clear();
- SetModemEnabled(path != "");
-}
+ partitionsListWidget->clear();
-void MainWindow::SelectRecovery(void)
-{
- QString path = PromptFileSelection();
- recoveryLineEdit->setText(path);
+ // Populate partitionsListWidget with partition names (from the PIT file)
+ for (int i = 0; i < workingPackageData.GetFirmwareInfo().GetFileInfos().length(); i++)
+ {
+ const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[i];
- SetRecoveryEnabled(path != "");
-}
+ const PitEntry *pitEntry = currentPitData.FindEntry(partitionInfo.GetPartitionId());
-void MainWindow::SetRepartionEnabled(int enabled)
-{
- if (repartitionCheckBox->isChecked() != (enabled != 0))
- repartitionCheckBox->setChecked(enabled);
+ if (pitEntry)
+ {
+ partitionsListWidget->addItem(pitEntry->GetPartitionName());
+ }
+ else
+ {
+ // TODO: "Firmware package includes invalid partition IDs."
+ loadedPackageData.GetFirmwareInfo().Clear();
+ currentPitData.Clear();
+ UpdateUnusedPartitionIds();
- if (enabled)
- {
- repartitionCheckBox->setEnabled(true);
- pitLineEdit->setEnabled(true);
- repartitionCheckBox->setChecked(true);
- }
- else
- {
- repartitionCheckBox->setEnabled(pitLineEdit->text() != "");
- pitLineEdit->setEnabled(false);
+ partitionsListWidget->clear();
+ return;
+ }
}
-
- UpdateStartButton();
-}
-void MainWindow::SetFactoryfsEnabled(int enabled)
-{
- if (factoryfsCheckBox->isChecked() != (enabled != 0))
- factoryfsCheckBox->setChecked(enabled);
+ partitionNameComboBox->clear();
+ partitionIdLineEdit->clear();
+ partitionFileLineEdit->clear();
+ partitionFileBrowseButton->setEnabled(false);
- if (enabled)
- {
- factoryfsCheckBox->setEnabled(true);
- factoryfsLineEdit->setEnabled(true);
- factoryfsCheckBox->setChecked(true);
- }
- else
- {
- factoryfsCheckBox->setEnabled(factoryfsLineEdit->text() != "");
- factoryfsLineEdit->setEnabled(false);
- }
-
- UpdateStartButton();
-}
+ repartitionCheckBox->setEnabled(true);
+ repartitionCheckBox->setChecked(workingPackageData.GetFirmwareInfo().GetRepartition());
+ partitionsListWidget->setEnabled(true);
+ addPartitionButton->setEnabled(true);
+ removePartitionButton->setEnabled(true && partitionsListWidget->currentRow() >= 0);
-void MainWindow::SetKernelEnabled(int enabled)
-{
- if (kernelCheckBox->isChecked() != (enabled != 0))
- kernelCheckBox->setChecked(enabled);
+ pitLineEdit->setText(workingPackageData.GetFirmwareInfo().GetPitFilename());
+
+ functionTabWidget->setCurrentWidget(flashTab);
- if (enabled)
- {
- kernelCheckBox->setEnabled(true);
- kernelLineEdit->setEnabled(true);
- kernelCheckBox->setChecked(true);
- }
- else
- {
- kernelCheckBox->setEnabled(kernelLineEdit->text() != "");
- kernelLineEdit->setEnabled(false);
- }
-
UpdateStartButton();
}
-void MainWindow::SetParamEnabled(int enabled)
+void MainWindow::SelectPartitionName(int index)
{
- if (paramCheckBox->isChecked() != (enabled != 0))
- paramCheckBox->setChecked(enabled);
-
- if (enabled)
- {
- paramCheckBox->setEnabled(true);
- paramLineEdit->setEnabled(true);
- paramCheckBox->setChecked(true);
- }
- else
+ if (!populatingPartitionNames && index != -1 && index != unusedPartitionIds.length())
{
- paramCheckBox->setEnabled(paramLineEdit->text() != "");
- paramLineEdit->setEnabled(false);
+ unsigned int newPartitionIndex = unusedPartitionIds[index];
+ unusedPartitionIds.removeAt(index);
+
+ FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()];
+ unusedPartitionIds.append(partitionInfo.GetPartitionId());
+ partitionInfo.SetPartitionId(newPartitionIndex);
+
+ partitionNameComboBox->clear();
+
+ // Update interface
+ UpdatePartitionNamesInterface();
+ partitionIdLineEdit->setText(QString::number(newPartitionIndex));
+ partitionsListWidget->currentItem()->setText(currentPitData.FindEntry(newPartitionIndex)->GetPartitionName());
}
-
- UpdateStartButton();
}
-void MainWindow::SetPrimaryBootloaderEnabled(int enabled)
+void MainWindow::SelectPartitionFile(void)
{
- if (primaryBootCheckBox->isChecked() != (enabled != 0))
- primaryBootCheckBox->setChecked(enabled);
+ QString path = PromptFileSelection();
- if (enabled)
- {
- primaryBootCheckBox->setEnabled(true);
- primaryBootLineEdit->setEnabled(true);
- primaryBootCheckBox->setChecked(true);
- }
- else
+ if (path != "")
{
- primaryBootCheckBox->setEnabled(primaryBootLineEdit->text() != "");
- primaryBootLineEdit->setEnabled(false);
+ workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()].SetFilename(path);
+ partitionFileLineEdit->setText(path);
+
+ pitBrowseButton->setEnabled(true);
+ partitionsListWidget->setEnabled(true);
+ UpdateStartButton();
+
+ if (unusedPartitionIds.length() > 0)
+ addPartitionButton->setEnabled(true);
}
-
- UpdateStartButton();
}
-void MainWindow::SetSecondaryBootloaderEnabled(int enabled)
+void MainWindow::SelectPartition(int row)
{
- if (secondaryBootCheckBox->isChecked() != (enabled != 0))
- secondaryBootCheckBox->setChecked(enabled);
-
- if (enabled)
+ if (row >= 0)
{
- secondaryBootCheckBox->setEnabled(true);
- secondaryBootLineEdit->setEnabled(true);
- secondaryBootCheckBox->setChecked(true);
+ const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[row];
+
+ UpdatePartitionNamesInterface();
+
+ partitionIdLineEdit->setText(QString::number(partitionInfo.GetPartitionId()));
+ partitionFileLineEdit->setText(partitionInfo.GetFilename());
+ partitionFileBrowseButton->setEnabled(true);
+
+ removePartitionButton->setEnabled(true);
}
else
{
- secondaryBootCheckBox->setEnabled(secondaryBootLineEdit->text() != "");
- secondaryBootLineEdit->setEnabled(false);
+ UpdatePartitionNamesInterface();
+
+ partitionIdLineEdit->clear();
+ partitionFileLineEdit->clear();
+ partitionFileBrowseButton->setEnabled(false);
+
+ removePartitionButton->setEnabled(false);
}
-
- UpdateStartButton();
}
-void MainWindow::SetCacheEnabled(int enabled)
+void MainWindow::AddPartition(void)
{
- if (cacheCheckBox->isChecked() != (enabled != 0))
- cacheCheckBox->setChecked(enabled);
+ FileInfo partitionInfo(unusedPartitionIds.first(), "");
+ workingPackageData.GetFirmwareInfo().GetFileInfos().append(partitionInfo);
+ UpdateUnusedPartitionIds();
- if (enabled)
- {
- cacheCheckBox->setEnabled(true);
- cacheLineEdit->setEnabled(true);
- cacheCheckBox->setChecked(true);
- }
- else
- {
- cacheCheckBox->setEnabled(cacheLineEdit->text() != "");
- cacheLineEdit->setEnabled(false);
- }
-
+ pitBrowseButton->setEnabled(false);
+ addPartitionButton->setEnabled(false);
+
+ partitionsListWidget->addItem(currentPitData.FindEntry(partitionInfo.GetPartitionId())->GetPartitionName());
+ partitionsListWidget->setCurrentRow(partitionsListWidget->count() - 1);
+ partitionsListWidget->setEnabled(false);
UpdateStartButton();
}
-void MainWindow::SetDatabaseEnabled(int enabled)
+void MainWindow::RemovePartition(void)
{
- if (databaseCheckBox->isChecked() != (enabled != 0))
- databaseCheckBox->setChecked(enabled);
+ workingPackageData.GetFirmwareInfo().GetFileInfos().removeAt(partitionsListWidget->currentRow());
+ UpdateUnusedPartitionIds();
- if (enabled)
- {
- databaseCheckBox->setEnabled(true);
- databaseLineEdit->setEnabled(true);
- databaseCheckBox->setChecked(true);
- }
- else
- {
- databaseCheckBox->setEnabled(databaseLineEdit->text() != "");
- databaseLineEdit->setEnabled(false);
- }
-
+ QListWidgetItem *item = partitionsListWidget->currentItem();
+ partitionsListWidget->setCurrentRow(-1);
+ delete item;
+
+ pitBrowseButton->setEnabled(true);
+ addPartitionButton->setEnabled(true);
+ partitionsListWidget->setEnabled(true);
UpdateStartButton();
}
-void MainWindow::SetModemEnabled(int enabled)
+void MainWindow::SelectPit(void)
{
- if (modemCheckBox->isChecked() != (enabled != 0))
- modemCheckBox->setChecked(enabled);
+ QString path = PromptFileSelection();
+ bool validPit = path != "";
+
+ // In order to map files in the old PIT to file in the new one, we first must use partition names instead of IDs.
+ QList<FileInfo> fileInfos = workingPackageData.GetFirmwareInfo().GetFileInfos();
+
+ int partitionNamesCount = fileInfos.length();
+ QString *partitionNames = new QString[fileInfos.length()];
+ for (int i = 0; i < fileInfos.length(); i++)
+ partitionNames[i] = currentPitData.FindEntry(fileInfos[i].GetPartitionId())->GetPartitionName();
- if (enabled)
+ currentPitData.Clear();
+
+ if (validPit)
{
- modemCheckBox->setEnabled(true);
- modemLineEdit->setEnabled(true);
- modemCheckBox->setChecked(true);
+ QFile pitFile(path);
+
+ if (ReadPit(&pitFile))
+ {
+ workingPackageData.GetFirmwareInfo().SetPitFilename(path);
+
+ partitionsListWidget->clear();
+ int partitionInfoIndex = 0;
+
+ for (int i = 0; i < partitionNamesCount; i++)
+ {
+ const PitEntry *pitEntry = currentPitData.FindEntry(partitionNames[i].toAscii().constData());
+
+ if (pitEntry)
+ {
+ fileInfos[partitionInfoIndex++].SetPartitionId(pitEntry->GetPartitionIdentifier());
+ partitionsListWidget->addItem(pitEntry->GetPartitionName());
+ }
+ else
+ {
+ fileInfos.removeAt(partitionInfoIndex);
+ }
+ }
+ }
+ else
+ {
+ validPit = false;
+ }
}
- else
+
+ // If the selected PIT was invalid, attempt to reload the old one.
+ if (!validPit)
{
- modemCheckBox->setEnabled(databaseLineEdit->text() != "");
- modemLineEdit->setEnabled(false);
+ // TODO: "The file selected was not a valid PIT file."
+ QFile originalPitFile(workingPackageData.GetFirmwareInfo().GetPitFilename());
+
+ if (ReadPit(&originalPitFile))
+ {
+ validPit = true;
+ }
+ else
+ {
+ // TODO: "Failed to reload working PIT data."
+ workingPackageData.Clear();
+ partitionsListWidget->clear();
+ }
}
-
+
+ UpdateUnusedPartitionIds();
+
+ delete [] partitionNames;
+
+ pitLineEdit->setText(workingPackageData.GetFirmwareInfo().GetPitFilename());
+
+ repartitionCheckBox->setEnabled(validPit);
+ partitionsListWidget->setEnabled(validPit);
+
+ addPartitionButton->setEnabled(validPit);
+ removePartitionButton->setEnabled(validPit && partitionsListWidget->currentRow() >= 0);
+
UpdateStartButton();
}
-void MainWindow::SetRecoveryEnabled(int enabled)
+void MainWindow::SetRepartition(int enabled)
{
- if (recoveryCheckBox->isChecked() != (enabled != 0))
- recoveryCheckBox->setChecked(enabled);
-
- if (enabled)
- {
- recoveryCheckBox->setEnabled(true);
- recoveryLineEdit->setEnabled(true);
- recoveryCheckBox->setChecked(true);
- }
- else
- {
- recoveryCheckBox->setEnabled(databaseLineEdit->text() != "");
- recoveryLineEdit->setEnabled(false);
- }
-
- UpdateStartButton();
+ workingPackageData.GetFirmwareInfo().SetRepartition(enabled);
}
void MainWindow::StartFlash(void)
@@ -522,68 +631,13 @@ void MainWindow::StartFlash(void)
if (repartitionCheckBox->isChecked())
{
+ arguments.append("--repartition");
+
arguments.append("--pit");
arguments.append(pitLineEdit->text());
}
- if (factoryfsCheckBox->isChecked())
- {
- arguments.append("--factoryfs");
- arguments.append(factoryfsLineEdit->text());
- }
-
- if (kernelCheckBox->isChecked())
- {
- arguments.append("--kernel");
- arguments.append(kernelLineEdit->text());
- }
-
- if (paramCheckBox->isChecked())
- {
- arguments.append("--param");
- arguments.append(paramLineEdit->text());
- }
-
- if (primaryBootCheckBox->isChecked())
- {
- arguments.append("--primary-boot");
- arguments.append(primaryBootLineEdit->text());
- }
-
- if (secondaryBootCheckBox->isChecked())
- {
- arguments.append("--secondary-boot");
- arguments.append(secondaryBootLineEdit->text());
- }
-
- if (cacheCheckBox->isChecked())
- {
- arguments.append("--cache");
- arguments.append(cacheLineEdit->text());
- }
-
- if (databaseCheckBox->isChecked())
- {
- arguments.append("--dbdata");
- arguments.append(databaseLineEdit->text());
- }
-
- if (modemCheckBox->isChecked())
- {
- arguments.append("--modem");
- arguments.append(modemLineEdit->text());
- }
-
- if (recoveryCheckBox->isChecked())
- {
- arguments.append("--recovery");
- arguments.append(recoveryLineEdit->text());
- }
-
- if (repartitionCheckBox->isChecked())
- {
- arguments.append("--repartition");
- }
+ // TODO: Loop through partitions and append them.
flashProgressBar->setEnabled(true);
UpdateStartButton();
@@ -600,13 +654,13 @@ void MainWindow::StartFlash(void)
QStringList environment = QProcess::systemEnvironment();
QStringList paths;
- // Ensure /usr/local/bin is in PATH
+ // Ensure /usr/bin is in PATH
for (int i = 0; i < environment.length(); i++)
{
if (environment[i].left(5) == "PATH=")
{
paths = environment[i].mid(5).split(':');
- paths.prepend("/usr/local/bin");
+ paths.prepend("/usr/bin");
break;
}
}
@@ -640,6 +694,140 @@ void MainWindow::StartFlash(void)
}
}
+void MainWindow::FirmwareNameChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().SetName(text);
+ UpdateBuildPackageButton();
+}
+
+void MainWindow::FirmwareVersionChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().SetVersion(text);
+ UpdateBuildPackageButton();
+}
+
+void MainWindow::PlatformNameChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().GetPlatformInfo().SetName(text);
+ UpdateBuildPackageButton();
+}
+
+void MainWindow::PlatformVersionChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().GetPlatformInfo().SetVersion(text);
+ UpdateBuildPackageButton();
+}
+
+void MainWindow::HomepageUrlChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().SetUrl(text);
+}
+
+void MainWindow::DonateUrlChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().SetDonateUrl(text);
+}
+
+void MainWindow::DeveloperNameChanged(const QString& text)
+{
+ if (text.isEmpty())
+ addDeveloperButton->setEnabled(false);
+ else
+ addDeveloperButton->setEnabled(true);
+}
+
+void MainWindow::SelectDeveloper(int row)
+{
+ if (row >= 0)
+ removeDeveloperButton->setEnabled(true);
+ else
+ removeDeveloperButton->setEnabled(false);
+}
+
+void MainWindow::AddDeveloper(void)
+{
+ workingPackageData.GetFirmwareInfo().GetDevelopers().append(createDeveloperNameLineEdit->text());
+
+ createDevelopersListWidget->addItem(createDeveloperNameLineEdit->text());
+ createDeveloperNameLineEdit->clear();
+
+ UpdateBuildPackageButton();
+}
+
+void MainWindow::RemoveDeveloper(void)
+{
+ workingPackageData.GetFirmwareInfo().GetDevelopers().removeAt(createDevelopersListWidget->currentRow());
+
+ QListWidgetItem *item = createDevelopersListWidget->currentItem();
+ createDevelopersListWidget->setCurrentRow(-1);
+ delete item;
+
+ removeDeveloperButton->setEnabled(false);
+
+ UpdateBuildPackageButton();
+}
+
+void MainWindow::DeviceInfoChanged(const QString& text)
+{
+ if (deviceManufacturerLineEdit->text().isEmpty() || deviceNameLineEdit->text().isEmpty() || deviceProductCodeLineEdit->text().isEmpty())
+ addDeviceButton->setEnabled(false);
+ else
+ addDeviceButton->setEnabled(true);
+}
+
+void MainWindow::SelectDevice(int row)
+{
+ if (row >= 0)
+ removeDeviceButton->setEnabled(true);
+ else
+ removeDeviceButton->setEnabled(false);
+}
+
+void MainWindow::AddDevice(void)
+{
+ workingPackageData.GetFirmwareInfo().GetDeviceInfos().append(DeviceInfo(deviceManufacturerLineEdit->text(), deviceNameLineEdit->text(),
+ deviceProductCodeLineEdit->text()));
+
+ createDevicesListWidget->addItem(deviceManufacturerLineEdit->text() + " " + deviceNameLineEdit->text() + " (" + deviceProductCodeLineEdit->text() + ")");
+ deviceManufacturerLineEdit->clear();
+ deviceNameLineEdit->clear();
+ deviceProductCodeLineEdit->clear();
+
+ UpdateBuildPackageButton();
+}
+
+void MainWindow::RemoveDevice(void)
+{
+ workingPackageData.GetFirmwareInfo().GetDeviceInfos().removeAt(createDevicesListWidget->currentRow());
+
+ QListWidgetItem *item = createDevicesListWidget->currentItem();
+ createDevicesListWidget->setCurrentRow(-1);
+ delete item;
+
+ removeDeviceButton->setEnabled(false);
+
+ UpdateBuildPackageButton();
+}
+
+void MainWindow::BuildPackage(void)
+{
+ QString packagePath = PromptFileCreation();
+
+ if (!packagePath.endsWith(".tar.gz", Qt::CaseInsensitive))
+ {
+ if (packagePath.endsWith(".tar", Qt::CaseInsensitive))
+ packagePath.append(".gz");
+ else if (packagePath.endsWith(".gz", Qt::CaseInsensitive))
+ packagePath.replace(packagePath.length() - 3, ".tar.gz");
+ else if (packagePath.endsWith(".tgz", Qt::CaseInsensitive))
+ packagePath.replace(packagePath.length() - 4, ".tar.gz");
+ else
+ packagePath.append(".tar.gz");
+ }
+
+ Packaging::BuildPackage(packagePath, workingPackageData);
+}
+
void MainWindow::HandleHeimdallStdout(void)
{
QString output = process.read(1024);
diff --git a/heimdall-frontend/Source/mainwindow.h b/heimdall-frontend/Source/mainwindow.h
index added4e..7525d67 100644
--- a/heimdall-frontend/Source/mainwindow.h
+++ b/heimdall-frontend/Source/mainwindow.h
@@ -21,13 +21,21 @@
#ifndef MAINWINDOW_H
#define MAINWINDOW_H
+// Qt
+#include <QList>
+#include <QMainWindow>
+#include <QProcess>
+#include <QTemporaryFile>
+
+// libpit
+#include "libpit.h"
+
// Heimdall Frontend
#include "aboutform.h"
#include "ui_mainwindow.h"
+#include "PackageData.h"
-// Qt
-#include <QMainWindow>
-#include <QProcess>
+using namespace libpit;
namespace HeimdallFrontend
{
@@ -45,11 +53,29 @@ namespace HeimdallFrontend
bool heimdallRunning;
QProcess process;
+ PackageData loadedPackageData;
+
+ PitData currentPitData;
+ PackageData workingPackageData;
+
+ bool populatingPartitionNames;
+ QList<unsigned int> unusedPartitionIds;
+
+ void UpdateUnusedPartitionIds(void);
+ bool ReadPit(QFile *file);
+
+ void UpdatePackageUserInterface(void);
+
bool IsArchive(QString path);
QString PromptFileSelection(void);
+ QString PromptFileCreation(void);
+
+ void UpdatePartitionNamesInterface(void);
void UpdateStartButton(void);
+ void UpdateBuildPackageButton(void);
+
public:
explicit MainWindow(QWidget *parent = 0);
@@ -60,30 +86,43 @@ namespace HeimdallFrontend
void OpenDonationWebpage(void);
void ShowAbout(void);
+ void SelectFirmwarePackage(void);
+ void OpenDeveloperHomepage(void);
+ void OpenDeveloperDonationWebpage(void);
+ void LoadFirmwarePackage(void);
+
+ void SelectPartitionName(int index);
+ void SelectPartitionFile(void);
+
+ void SelectPartition(int row);
+ void AddPartition(void);
+ void RemovePartition(void);
+
void SelectPit(void);
- void SelectFactoryfs(void);
- void SelectKernel(void);
- void SelectParam(void);
- void SelectPrimaryBootloader(void);
- void SelectSecondaryBootloader(void);
- void SelectCache(void);
- void SelectDatabase(void);
- void SelectModem(void);
- void SelectRecovery(void);
-
- void SetRepartionEnabled(int enabled);
- void SetFactoryfsEnabled(int enabled);
- void SetKernelEnabled(int enabled);
- void SetParamEnabled(int enabled);
- void SetPrimaryBootloaderEnabled(int enabled);
- void SetSecondaryBootloaderEnabled(int enabled);
- void SetCacheEnabled(int enabled);
- void SetDatabaseEnabled(int enabled);
- void SetModemEnabled(int enabled);
- void SetRecoveryEnabled(int enabled);
+ void SetRepartition(int enabled);
void StartFlash(void);
+ void FirmwareNameChanged(const QString& text);
+ void FirmwareVersionChanged(const QString& text);
+ void PlatformNameChanged(const QString& text);
+ void PlatformVersionChanged(const QString& text);
+
+ void HomepageUrlChanged(const QString& text);
+ void DonateUrlChanged(const QString& text);
+
+ void DeveloperNameChanged(const QString& text);
+ void SelectDeveloper(int row);
+ void AddDeveloper(void);
+ void RemoveDeveloper(void);
+
+ void DeviceInfoChanged(const QString& text);
+ void SelectDevice(int row);
+ void AddDevice(void);
+ void RemoveDevice(void);
+
+ void BuildPackage(void);
+
void HandleHeimdallStdout(void);
void HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus);
void HandleHeimdallError(QProcess::ProcessError error);
diff --git a/heimdall-frontend/aboutform.ui b/heimdall-frontend/aboutform.ui
index 80b7181..39e87cc 100644
--- a/heimdall-frontend/aboutform.ui
+++ b/heimdall-frontend/aboutform.ui
@@ -32,7 +32,7 @@
</size>
</property>
<property name="windowTitle">
- <string>About Heimdall Frontend 1.1</string>
+ <string>About Heimdall Frontend</string>
</property>
<widget class="QGroupBox" name="groupBox">
<property name="geometry">
@@ -50,14 +50,15 @@
<property name="geometry">
<rect>
<x>10</x>
- <y>190</y>
+ <y>160</y>
<width>581</width>
- <height>241</height>
+ <height>271</height>
</rect>
</property>
<property name="font">
<font>
<pointsize>9</pointsize>
+ <kerning>true</kerning>
</font>
</property>
<property name="autoFillBackground">
@@ -156,21 +157,17 @@ THE SOFTWARE IS PROVIDED &quot;AS IS&quot;, WITHOUT WARRANTY OF ANY KIND, EXPRES
<x>10</x>
<y>10</y>
<width>581</width>
- <height>101</height>
+ <height>51</height>
</rect>
</property>
<property name="font">
<font>
- <pointsize>9</pointsize>
+ <pointsize>10</pointsize>
</font>
</property>
<property name="text">
<string>Heimdall Frontend
-Version 1.1.0
-Copyright © 2010 Benjamin Dobell, Glass Echidna
-
-Heimdall
-Version 1.1.0
+Version 1.3.0
Copyright © 2010 Benjamin Dobell, Glass Echidna</string>
</property>
<property name="textFormat">
@@ -190,7 +187,7 @@ Copyright © 2010 Benjamin Dobell, Glass Echidna</string>
<property name="geometry">
<rect>
<x>10</x>
- <y>118</y>
+ <y>70</y>
<width>581</width>
<height>16</height>
</rect>
@@ -217,7 +214,7 @@ Copyright © 2010 Benjamin Dobell, Glass Echidna</string>
<property name="geometry">
<rect>
<x>10</x>
- <y>130</y>
+ <y>90</y>
<width>581</width>
<height>21</height>
</rect>
@@ -246,7 +243,7 @@ p, li { white-space: pre-wrap; }
<property name="geometry">
<rect>
<x>10</x>
- <y>150</y>
+ <y>110</y>
<width>581</width>
<height>16</height>
</rect>
@@ -273,7 +270,7 @@ p, li { white-space: pre-wrap; }
<property name="geometry">
<rect>
<x>10</x>
- <y>162</y>
+ <y>130</y>
<width>581</width>
<height>21</height>
</rect>
diff --git a/heimdall-frontend/heimdall-frontend.vcxproj b/heimdall-frontend/heimdall-frontend.vcxproj
index 6182ce6..6844d0a 100644
--- a/heimdall-frontend/heimdall-frontend.vcxproj
+++ b/heimdall-frontend/heimdall-frontend.vcxproj
@@ -62,19 +62,20 @@
<IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(Configuration)\</IntDir>
<IntDir Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">$(Configuration)\</IntDir>
<IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(Configuration)\</IntDir>
- <IncludePath Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(IncludePath)</IncludePath>
+ <IncludePath Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(ProjectDir)include;$(SolutionDir)libpit\Source;$(IncludePath)</IncludePath>
<LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
<LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">false</LinkIncremental>
<IncludePath Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(IncludePath)</IncludePath>
<IncludePath Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">$(IncludePath)</IncludePath>
<LibraryPath Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(LibraryPath)</LibraryPath>
<LibraryPath Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">$(LibraryPath)</LibraryPath>
- <LibraryPath Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(LibraryPath)</LibraryPath>
+ <LibraryPath Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(ProjectDir)lib\win32;$(LibraryPath)</LibraryPath>
+ <SourcePath Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SourcePath)</SourcePath>
</PropertyGroup>
<ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
<ClCompile>
<PreprocessorDefinitions>UNICODE;WIN32;QT_LARGEFILE_SUPPORT;QT_CORE_LIB;QT_GUI_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;$(QTDIR)\include\QtXml;..\libpit\Source;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
<Optimization>Disabled</Optimization>
<DebugInformationFormat>EditAndContinue</DebugInformationFormat>
<RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
@@ -85,15 +86,15 @@
<Link>
<SubSystem>Windows</SubSystem>
<OutputFile>$(OutDir)$(TargetName)$(TargetExt)</OutputFile>
- <AdditionalLibraryDirectories>$(QTDIR)\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <AdditionalLibraryDirectories>$(QTDIR)\lib;$(SolutionDir)$(Platform)\$(Configuration)\lib\;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
<GenerateDebugInformation>true</GenerateDebugInformation>
- <AdditionalDependencies>qtmaind.lib;QtCored4.lib;QtGuid4.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <AdditionalDependencies>qtmaind.lib;QtCored4.lib;QtGuid4.lib;QtXml4.lib;libpit.lib;%(AdditionalDependencies)</AdditionalDependencies>
</Link>
</ItemDefinitionGroup>
<ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
<ClCompile>
<PreprocessorDefinitions>UNICODE;WIN32;QT_LARGEFILE_SUPPORT;QT_NO_DEBUG;NDEBUG;QT_CORE_LIB;QT_GUI_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;$(QTDIR)\include\QtXml;..\libpit\Source;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
<DebugInformationFormat>
</DebugInformationFormat>
<RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -106,15 +107,15 @@
<Link>
<SubSystem>Windows</SubSystem>
<OutputFile>$(OutDir)$(TargetName)$(TargetExt)</OutputFile>
- <AdditionalLibraryDirectories>$(QTDIR)\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <AdditionalLibraryDirectories>$(QTDIR)\lib;$(SolutionDir)$(Platform)\$(Configuration)\lib\;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
<GenerateDebugInformation>false</GenerateDebugInformation>
- <AdditionalDependencies>qtmain.lib;QtCore4.lib;QtGui4.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <AdditionalDependencies>qtmain.lib;QtCore4.lib;QtGui4.lib;QtXml4.lib;libpit.lib;%(AdditionalDependencies)</AdditionalDependencies>
</Link>
</ItemDefinitionGroup>
<ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">
<ClCompile>
<PreprocessorDefinitions>UNICODE;WIN32;QT_LARGEFILE_SUPPORT;QT_NO_DEBUG;NDEBUG;QT_CORE_LIB;QT_GUI_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;$(QTDIR)\include\QtXml;..\libpit\Source;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
<DebugInformationFormat>
</DebugInformationFormat>
<RuntimeLibrary>MultiThreaded</RuntimeLibrary>
@@ -127,9 +128,9 @@
<Link>
<SubSystem>Windows</SubSystem>
<OutputFile>$(OutDir)$(TargetName)$(TargetExt)</OutputFile>
- <AdditionalLibraryDirectories>$(QTDIR)\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <AdditionalLibraryDirectories>$(QTDIR)\lib;$(SolutionDir)$(Platform)\$(Configuration)\lib\;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
<GenerateDebugInformation>false</GenerateDebugInformation>
- <AdditionalDependencies>qtmains.lib;QtCore4s.lib;QtGui4s.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <AdditionalDependencies>qtmains.lib;QtCore4s.lib;QtGui4s.lib;QtXml4s.lib;libpit.lib;%(AdditionalDependencies)</AdditionalDependencies>
</Link>
</ItemDefinitionGroup>
<ItemGroup>
@@ -147,10 +148,14 @@
</ClCompile>
<ClCompile Include="GeneratedFiles\Release\moc_mainwindow.cpp">
<ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">true</ExcludedFromBuild>
</ClCompile>
<ClCompile Include="Source\aboutform.cpp" />
+ <ClCompile Include="Source\FirmwareInfo.cpp" />
<ClCompile Include="Source\main.cpp" />
<ClCompile Include="Source\mainwindow.cpp" />
+ <ClCompile Include="Source\PackageData.cpp" />
+ <ClCompile Include="Source\Packaging.cpp" />
</ItemGroup>
<ItemGroup>
<CustomBuild Include="mainwindow.ui">
@@ -173,19 +178,22 @@
<ClInclude Include="GeneratedFiles\ui_aboutform.h" />
<ClInclude Include="GeneratedFiles\ui_mainwindow.h" />
<ClInclude Include="Source\aboutform.h" />
+ <ClInclude Include="Source\FirmwareInfo.h" />
+ <ClInclude Include="Source\PackageData.h" />
+ <ClInclude Include="Source\Packaging.h" />
<CustomBuild Include="Source\mainwindow.h">
<AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
<Message Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">Moc%27ing %(Identity)...</Message>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_CORE_LIB -DQT_GUI_LIB -D_UNICODE "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I." "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
+ <Command Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_CORE_LIB -DQT_GUI_LIB -D_UNICODE "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\QtXml" "-I.\..\libpit\Source" "-I." "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
<AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
<AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
<Message Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">Moc%27ing %(Identity)...</Message>
<Message Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">Moc%27ing %(Identity)...</Message>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_NO_DEBUG -DNDEBUG -DQT_CORE_LIB -DQT_GUI_LIB "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_NO_DEBUG -DNDEBUG -DQT_CORE_LIB -DQT_GUI_LIB "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
+ <Command Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_NO_DEBUG -DNDEBUG -DQT_CORE_LIB -DQT_GUI_LIB "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\QtXml" "-I.\..\libpit\Source" "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
+ <Command Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_NO_DEBUG -DNDEBUG -DQT_CORE_LIB -DQT_GUI_LIB "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\QtXml" "-I.\..\libpit\Source" "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
</CustomBuild>
</ItemGroup>
<ItemGroup>
diff --git a/heimdall-frontend/heimdall-frontend.vcxproj.filters b/heimdall-frontend/heimdall-frontend.vcxproj.filters
index aff2885..d1c227e 100644
--- a/heimdall-frontend/heimdall-frontend.vcxproj.filters
+++ b/heimdall-frontend/heimdall-frontend.vcxproj.filters
@@ -49,6 +49,15 @@
<ClCompile Include="Source\aboutform.cpp">
<Filter>Source</Filter>
</ClCompile>
+ <ClCompile Include="Source\Packaging.cpp">
+ <Filter>Source</Filter>
+ </ClCompile>
+ <ClCompile Include="Source\PackageData.cpp">
+ <Filter>Source</Filter>
+ </ClCompile>
+ <ClCompile Include="Source\FirmwareInfo.cpp">
+ <Filter>Source</Filter>
+ </ClCompile>
</ItemGroup>
<ItemGroup>
<CustomBuild Include="mainwindow.ui">
@@ -74,5 +83,14 @@
<ClInclude Include="Source\aboutform.h">
<Filter>Source</Filter>
</ClInclude>
+ <ClInclude Include="Source\Packaging.h">
+ <Filter>Source</Filter>
+ </ClInclude>
+ <ClInclude Include="Source\PackageData.h">
+ <Filter>Source</Filter>
+ </ClInclude>
+ <ClInclude Include="Source\FirmwareInfo.h">
+ <Filter>Source</Filter>
+ </ClInclude>
</ItemGroup>
</Project> \ No newline at end of file
diff --git a/heimdall-frontend/include/zconf.h b/heimdall-frontend/include/zconf.h
new file mode 100755
index 0000000..02ce56c
--- /dev/null
+++ b/heimdall-frontend/include/zconf.h
@@ -0,0 +1,428 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
+
+/* all linked symbols */
+# define _dist_code z__dist_code
+# define _length_code z__length_code
+# define _tr_align z__tr_align
+# define _tr_flush_block z__tr_flush_block
+# define _tr_init z__tr_init
+# define _tr_stored_block z__tr_stored_block
+# define _tr_tally z__tr_tally
+# define adler32 z_adler32
+# define adler32_combine z_adler32_combine
+# define adler32_combine64 z_adler32_combine64
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# define crc32 z_crc32
+# define crc32_combine z_crc32_combine
+# define crc32_combine64 z_crc32_combine64
+# define deflate z_deflate
+# define deflateBound z_deflateBound
+# define deflateCopy z_deflateCopy
+# define deflateEnd z_deflateEnd
+# define deflateInit2_ z_deflateInit2_
+# define deflateInit_ z_deflateInit_
+# define deflateParams z_deflateParams
+# define deflatePrime z_deflatePrime
+# define deflateReset z_deflateReset
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateSetHeader z_deflateSetHeader
+# define deflateTune z_deflateTune
+# define deflate_copyright z_deflate_copyright
+# define get_crc_table z_get_crc_table
+# define gz_error z_gz_error
+# define gz_intmax z_gz_intmax
+# define gz_strwinerror z_gz_strwinerror
+# define gzbuffer z_gzbuffer
+# define gzclearerr z_gzclearerr
+# define gzclose z_gzclose
+# define gzclose_r z_gzclose_r
+# define gzclose_w z_gzclose_w
+# define gzdirect z_gzdirect
+# define gzdopen z_gzdopen
+# define gzeof z_gzeof
+# define gzerror z_gzerror
+# define gzflush z_gzflush
+# define gzgetc z_gzgetc
+# define gzgets z_gzgets
+# define gzoffset z_gzoffset
+# define gzoffset64 z_gzoffset64
+# define gzopen z_gzopen
+# define gzopen64 z_gzopen64
+# define gzprintf z_gzprintf
+# define gzputc z_gzputc
+# define gzputs z_gzputs
+# define gzread z_gzread
+# define gzrewind z_gzrewind
+# define gzseek z_gzseek
+# define gzseek64 z_gzseek64
+# define gzsetparams z_gzsetparams
+# define gztell z_gztell
+# define gztell64 z_gztell64
+# define gzungetc z_gzungetc
+# define gzwrite z_gzwrite
+# define inflate z_inflate
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define inflateBackInit_ z_inflateBackInit_
+# define inflateCopy z_inflateCopy
+# define inflateEnd z_inflateEnd
+# define inflateGetHeader z_inflateGetHeader
+# define inflateInit2_ z_inflateInit2_
+# define inflateInit_ z_inflateInit_
+# define inflateMark z_inflateMark
+# define inflatePrime z_inflatePrime
+# define inflateReset z_inflateReset
+# define inflateReset2 z_inflateReset2
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateUndermine z_inflateUndermine
+# define inflate_copyright z_inflate_copyright
+# define inflate_fast z_inflate_fast
+# define inflate_table z_inflate_table
+# define uncompress z_uncompress
+# define zError z_zError
+# define zcalloc z_zcalloc
+# define zcfree z_zcfree
+# define zlibCompileFlags z_zlibCompileFlags
+# define zlibVersion z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+# define Byte z_Byte
+# define Bytef z_Bytef
+# define alloc_func z_alloc_func
+# define charf z_charf
+# define free_func z_free_func
+# define gzFile z_gzFile
+# define gz_header z_gz_header
+# define gz_headerp z_gz_headerp
+# define in_func z_in_func
+# define intf z_intf
+# define out_func z_out_func
+# define uInt z_uInt
+# define uIntf z_uIntf
+# define uLong z_uLong
+# define uLongf z_uLongf
+# define voidp z_voidp
+# define voidpc z_voidpc
+# define voidpf z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+# define gz_header_s z_gz_header_s
+# define internal_state z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+# define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+# define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+# define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+# ifndef SYS16BIT
+# define SYS16BIT
+# endif
+# endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+# define MAXSEG_64K
+#endif
+#ifdef MSDOS
+# define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+# ifndef STDC
+# define STDC
+# endif
+# if __STDC_VERSION__ >= 199901L
+# ifndef STDC99
+# define STDC99
+# endif
+# endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+# define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+# define STDC
+#endif
+
+#ifndef STDC
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const /* note: need a more gentle solution here */
+# endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+# define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+# if defined(M_I86SM) || defined(M_I86MM)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+# if (defined(__SMALL__) || defined(__MEDIUM__))
+ /* Turbo C small or medium model */
+# define SMALL_MEDIUM
+# ifdef __BORLANDC__
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+ /* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+# ifdef ZLIB_DLL
+# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+# ifdef ZLIB_INTERNAL
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+# endif
+# endif /* ZLIB_DLL */
+ /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+# ifdef ZLIB_WINAPI
+# ifdef FAR
+# undef FAR
+# endif
+# include <windows.h>
+ /* No need for _export, use ZLIB.DEF instead. */
+ /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+# define ZEXPORT WINAPI
+# ifdef WIN32
+# define ZEXPORTVA WINAPIV
+# else
+# define ZEXPORTVA FAR CDECL
+# endif
+# endif
+#endif
+
+#if defined (__BEOS__)
+# ifdef ZLIB_DLL
+# ifdef ZLIB_INTERNAL
+# define ZEXPORT __declspec(dllexport)
+# define ZEXPORTVA __declspec(dllexport)
+# else
+# define ZEXPORT __declspec(dllimport)
+# define ZEXPORTVA __declspec(dllimport)
+# endif
+# endif
+#endif
+
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+# define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+# define ZEXPORTVA
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char Byte; /* 8 bits */
+#endif
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+# define Bytef Byte FAR
+#else
+ typedef Byte FAR Bytef;
+#endif
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef STDC
+# include <sys/types.h> /* for off_t */
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+# undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+# include <unistd.h> /* for SEEK_* and off_t */
+# ifdef VMS
+# include <unixio.h> /* for off_t */
+# endif
+# ifndef z_off_t
+# define z_off_t off_t
+# endif
+#endif
+
+#ifndef SEEK_SET
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+# define z_off_t long
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+# define z_off64_t off64_t
+#else
+# define z_off64_t z_off_t
+#endif
+
+#if defined(__OS400__)
+# define NO_vsnprintf
+#endif
+
+#if defined(__MVS__)
+# define NO_vsnprintf
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+ #pragma map(deflateInit_,"DEIN")
+ #pragma map(deflateInit2_,"DEIN2")
+ #pragma map(deflateEnd,"DEEND")
+ #pragma map(deflateBound,"DEBND")
+ #pragma map(inflateInit_,"ININ")
+ #pragma map(inflateInit2_,"ININ2")
+ #pragma map(inflateEnd,"INEND")
+ #pragma map(inflateSync,"INSY")
+ #pragma map(inflateSetDictionary,"INSEDI")
+ #pragma map(compressBound,"CMBND")
+ #pragma map(inflate_table,"INTABL")
+ #pragma map(inflate_fast,"INFA")
+ #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
diff --git a/heimdall-frontend/include/zlib.h b/heimdall-frontend/include/zlib.h
new file mode 100755
index 0000000..bfbba83
--- /dev/null
+++ b/heimdall-frontend/include/zlib.h
@@ -0,0 +1,1613 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 1.2.5, April 19th, 2010
+
+ Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
+ (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.5"
+#define ZLIB_VERNUM 0x1250
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 5
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed data.
+ This version of the library supports only one compression method (deflation)
+ but other algorithms will be added later and will have the same stream
+ interface.
+
+ Compression can be done in a single step if the buffers are large enough,
+ or can be done by repeated calls of the compression function. In the latter
+ case, the application must provide more input and/or consume the output
+ (providing more output space) before each call.
+
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio using the functions that start
+ with "gz". The gzip format is different from the zlib format. gzip is a
+ gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+ This library can optionally read and write gzip streams in memory as well.
+
+ The zlib format was designed to be compact and fast for use in memory
+ and on communications channels. The gzip format was designed for single-
+ file compression on file systems, has a larger header than zlib to maintain
+ directory information, and uses a different, slower check method than zlib.
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never crash
+ even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void (*free_func) OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total nb of input bytes read so far */
+
+ Bytef *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total nb of bytes output so far */
+
+ char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidpf opaque; /* private data object passed to zalloc and zfree */
+
+ int data_type; /* best guess about the data type: binary or text */
+ uLong adler; /* adler32 value of the uncompressed data */
+ uLong reserved; /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+ gzip header information passed to and from zlib routines. See RFC 1952
+ for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+ int text; /* true if compressed data believed to be text */
+ uLong time; /* modification time */
+ int xflags; /* extra flags (not used when writing a gzip file) */
+ int os; /* operating system */
+ Bytef *extra; /* pointer to extra field or Z_NULL if none */
+ uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
+ uInt extra_max; /* space at extra (only when reading header) */
+ Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
+ uInt name_max; /* space at name (only when reading header) */
+ Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
+ uInt comm_max; /* space at comment (only when reading header) */
+ int hcrc; /* true if there was or will be a header crc */
+ int done; /* true when done reading gzip header (not used
+ when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+ The application must update next_in and avail_in when avail_in has dropped
+ to zero. It must update next_out and avail_out when avail_out has dropped
+ to zero. The application must initialize zalloc, zfree and opaque before
+ calling the init function. All other fields are set by the compression
+ library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, zalloc and zfree must be
+ thread safe.
+
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this if
+ the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
+ returned by zalloc for objects of exactly 65536 bytes *must* have their
+ offset normalized to zero. The default allocation function provided by this
+ library ensures this (see zutil.c). To reduce memory requirements and avoid
+ any allocation of 64K objects, at the expense of compression ratio, compile
+ the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or progress
+ reports. After compression, total_in holds the total size of the
+ uncompressed data and may be saved for use in the decompressor (particularly
+ if the decompressor wants to decompress everything in a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH 2
+#define Z_FULL_FLUSH 3
+#define Z_FINISH 4
+#define Z_BLOCK 5
+#define Z_TREES 6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_RLE 3
+#define Z_FIXED 4
+#define Z_DEFAULT_STRATEGY 0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY 0
+#define Z_TEXT 1
+#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN 2
+/* Possible values of the data_type field (though see inflate()) */
+
+#define Z_DEFLATED 8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+ /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is not
+ compatible with the zlib.h header file used by the application. This check
+ is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller. If
+ zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+ allocation functions.
+
+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at all
+ (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
+ requests a default compromise between speed and compression (currently
+ equivalent to level 6).
+
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if level is not a valid compression level, or
+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION). msg is set to null
+ if there is no error message. deflateInit does not perform any compression:
+ this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+ deflate compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. deflate performs one or both of the
+ following actions:
+
+ - Compress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in and avail_in are updated and
+ processing will resume at this point for the next call of deflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications). Some
+ output may be provided even if flush is not set.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating avail_in or avail_out accordingly; avail_out should
+ never be zero before the call. The application can consume the compressed
+ output when it wants, for example when the output buffer is full (avail_out
+ == 0), or after each call of deflate(). If deflate returns Z_OK and with
+ zero avail_out, it must be called again after making room in the output
+ buffer because there might be more output pending.
+
+ Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+ decide how much data to accumulate before producing output, in order to
+ maximize compression.
+
+ If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In
+ particular avail_in is zero after the call if enough output space has been
+ provided before the call.) Flushing may degrade compression for some
+ compression algorithms and so it should be used only when necessary. This
+ completes the current deflate block and follows it with an empty stored block
+ that is three bits plus filler bits to the next byte, followed by four bytes
+ (00 00 ff ff).
+
+ If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+ output buffer, but the output is not aligned to a byte boundary. All of the
+ input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+ This completes the current deflate block and follows it with an empty fixed
+ codes block that is 10 bits long. This assures that enough bytes are output
+ in order for the decompressor to finish the block before the empty fixed code
+ block.
+
+ If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+ for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+ seven bits of the current block are held to be written as the next byte after
+ the next deflate block is completed. In this case, the decompressor may not
+ be provided enough bits at this point in order to complete decompression of
+ the data provided so far to the compressor. It may need to wait for the next
+ block to be emitted. This is for advanced applications that need to control
+ the emission of deflate blocks.
+
+ If flush is set to Z_FULL_FLUSH, all output is flushed as with
+ Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ compression.
+
+ If deflate returns with avail_out == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ avail_out), until the flush is complete (deflate returns with non-zero
+ avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+ avail_out is greater than six to avoid repeated flush markers due to
+ avail_out == 0 on return.
+
+ If the parameter flush is set to Z_FINISH, pending input is processed,
+ pending output is flushed and deflate returns with Z_STREAM_END if there was
+ enough output space; if deflate returns with Z_OK, this function must be
+ called again with Z_FINISH and more output space (updated avail_out) but no
+ more input data, until it returns with Z_STREAM_END or an error. After
+ deflate has returned Z_STREAM_END, the only possible operations on the stream
+ are deflateReset or deflateEnd.
+
+ Z_FINISH can be used immediately after deflateInit if all the compression
+ is to be done in a single step. In this case, avail_out must be at least the
+ value returned by deflateBound (see below). If deflate does not return
+ Z_STREAM_END, then it must be called again as described above.
+
+ deflate() sets strm->adler to the adler32 checksum of all input read
+ so far (that is, total_in bytes).
+
+ deflate() may update strm->data_type if it can make a good guess about
+ the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect the
+ compression algorithm in any manner.
+
+ deflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if all input has been
+ consumed and all output has been produced (only when flush is set to
+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+ if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+ (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
+ fatal, and deflate() can be called again with more input and more output
+ space to continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+ prematurely (some input or output was discarded). In the error case, msg
+ may be set but then points to a static string (which must not be
+ deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+ Initializes the internal stream state for decompression. The fields
+ next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+ the caller. If next_in is not Z_NULL and avail_in is large enough (the
+ exact value depends on the compression method), inflateInit determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly; otherwise the allocation will be deferred to the first call of
+ inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+ use default allocation functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit() does not process any header information -- that is deferred
+ until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+ inflate decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. inflate performs one or both of the
+ following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing will
+ resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there is
+ no more input data or no more space in the output buffer (see below about
+ the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating the next_* and avail_* values accordingly. The
+ application can consume the uncompressed output when it wants, for example
+ when the output buffer is full (avail_out == 0), or after each call of
+ inflate(). If inflate returns Z_OK and with zero avail_out, it must be
+ called again after making room in the output buffer because there might be
+ more output pending.
+
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+ Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate()
+ stop if and when it gets to the next deflate block boundary. When decoding
+ the zlib or gzip format, this will cause inflate() to return immediately
+ after the header and before the first block. When doing a raw inflate,
+ inflate() will go ahead and process the first block, and will return when it
+ gets to the end of that block, or when it runs out of data.
+
+ The Z_BLOCK option assists in appending to or combining deflate streams.
+ Also to assist in this, on return inflate() will set strm->data_type to the
+ number of unused bits in the last byte taken from strm->next_in, plus 64 if
+ inflate() is currently decoding the last block in the deflate stream, plus
+ 128 if inflate() returned immediately after decoding an end-of-block code or
+ decoding the complete header up to just before the first byte of the deflate
+ stream. The end-of-block will not be indicated until all of the uncompressed
+ data from that block has been written to strm->next_out. The number of
+ unused bits may in general be greater than seven, except when bit 7 of
+ data_type is set, in which case the number of unused bits will be less than
+ eight. data_type is set as noted here every time inflate() returns for all
+ flush options, and so can be used to determine the amount of currently
+ consumed input in bits.
+
+ The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+ end of each deflate block header is reached, before any actual data in that
+ block is decoded. This allows the caller to determine the length of the
+ deflate block header for later use in random access within a deflate block.
+ 256 is added to the value of strm->data_type when inflate() returns
+ immediately after reaching the end of the deflate block header.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step (a
+ single call of inflate), the parameter flush should be set to Z_FINISH. In
+ this case all pending input is processed and all pending output is flushed;
+ avail_out must be large enough to hold all the uncompressed data. (The size
+ of the uncompressed data may have been saved by the compressor for this
+ purpose.) The next operation on this stream must be inflateEnd to deallocate
+ the decompression state. The use of Z_FINISH is never required, but can be
+ used to inform inflate that a faster approach may be used for the single
+ inflate() call.
+
+ In this implementation, inflate() always flushes as much output as
+ possible to the output buffer, and always uses the faster approach on the
+ first call. So the only effect of the flush parameter in this implementation
+ is on the return value of inflate(), as noted below, or when it returns early
+ because Z_BLOCK or Z_TREES is used.
+
+ If a preset dictionary is needed after this call (see inflateSetDictionary
+ below), inflate sets strm->adler to the adler32 checksum of the dictionary
+ chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+ strm->adler to the adler32 checksum of all output produced so far (that is,
+ total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+ below. At the end of the stream, inflate() checks that its computed adler32
+ checksum is equal to that saved by the compressor and returns Z_STREAM_END
+ only if the checksum is correct.
+
+ inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically, if requested when
+ initializing with inflateInit2(). Any information contained in the gzip
+ header is not retained, so applications that need that information should
+ instead use raw inflate, see inflateInit2() below, or inflateBack() and
+ perform their own processing of the gzip header and trailer.
+
+ inflate() returns Z_OK if some progress has been made (more input processed
+ or more output produced), Z_STREAM_END if the end of the compressed data has
+ been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+ preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect check
+ value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+ next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
+ Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+ output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ inflate() can be called again with more input and more output space to
+ continue decompressing. If Z_DATA_ERROR is returned, the application may
+ then call inflateSync() to look for a good compression block if a partial
+ recovery of the data is desired.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+
+ /* Advanced functions */
+
+/*
+ The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+ int level,
+ int method,
+ int windowBits,
+ int memLevel,
+ int strategy));
+
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by the
+ caller.
+
+ The method parameter is the compression method. It must be Z_DEFLATED in
+ this version of the library.
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ deflateInit is used instead.
+
+ windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
+ determines the window size. deflate() will then generate raw deflate data
+ with no zlib header or trailer, and will not compute an adler32 check value.
+
+ windowBits can also be greater than 15 for optional gzip encoding. Add
+ 16 to windowBits to write a simple gzip header and trailer around the
+ compressed data instead of a zlib wrapper. The gzip header will have no
+ file name, no extra data, no comment, no modification time (set to zero), no
+ header crc, and the operating system will be set to 255 (unknown). If a
+ gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression state. memLevel=1 uses minimum memory but is
+ slow and reduces compression ratio; memLevel=9 uses maximum memory for
+ optimal speed. The default value is 8. See zconf.h for total memory usage
+ as a function of windowBits and memLevel.
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+ filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match), or Z_RLE to limit match distances to one (run-length
+ encoding). Filtered data consists mostly of small values with a somewhat
+ random distribution. In this case, the compression algorithm is tuned to
+ compress them better. The effect of Z_FILTERED is to force more Huffman
+ coding and less string matching; it is somewhat intermediate between
+ Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
+ fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
+ strategy parameter only affects the compression ratio but not the
+ correctness of the compressed output even if it is not set appropriately.
+ Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+ decoder for special applications.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+ method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+ incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
+ set to null if there is no error message. deflateInit2 does not perform any
+ compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. This function must be called
+ immediately after deflateInit, deflateInit2 or deflateReset, before any call
+ of deflate. The compressor and decompressor must use exactly the same
+ dictionary (see inflateSetDictionary).
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy; the data can then be compressed better than
+ with the default empty dictionary.
+
+ Depending on the size of the compression data structures selected by
+ deflateInit or deflateInit2, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size
+ provided in deflateInit or deflateInit2. Thus the strings most likely to be
+ useful should be put at the end of the dictionary, not at the front. In
+ addition, the current implementation of deflate will use at most the window
+ size minus 262 bytes of the provided dictionary.
+
+ Upon return of this function, strm->adler is set to the adler32 value
+ of the dictionary; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.) If a raw deflate was requested, then the
+ adler32 value is not computed and strm->adler is not set.
+
+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent (for example if deflate has already been called for this stream
+ or if the compression method is bsort). deflateSetDictionary does not
+ perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling deflateEnd. Note that deflateCopy duplicates the internal
+ compression state which can be quite large, so this strategy is slow and can
+ consume lots of memory.
+
+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to deflateEnd followed by deflateInit,
+ but does not free and reallocate all the internal compression state. The
+ stream will keep the same compression level and any other attributes that
+ may have been set by deflateInit2.
+
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+ int level,
+ int strategy));
+/*
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in deflateInit2. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different strategy.
+ If the compression level is changed, the input available so far is
+ compressed with the old level (and may be flushed); the new level will take
+ effect only at the next call of deflate().
+
+ Before the call of deflateParams, the stream state must be set as for
+ a call of deflate(), since the currently available input may have to be
+ compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+ deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+ strm->avail_out was zero.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+ int good_length,
+ int max_lazy,
+ int nice_length,
+ int max_chain));
+/*
+ Fine tune deflate's internal compression parameters. This should only be
+ used by someone who understands the algorithm used by zlib's deflate for
+ searching for the best matching string, and even then only by the most
+ fanatic optimizer trying to squeeze out the last compressed bit for their
+ specific input data. Read the deflate.c source code for the meaning of the
+ max_lazy, good_length, nice_length, and max_chain parameters.
+
+ deflateTune() can be called after deflateInit() or deflateInit2(), and
+ returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+ uLong sourceLen));
+/*
+ deflateBound() returns an upper bound on the compressed size after
+ deflation of sourceLen bytes. It must be called after deflateInit() or
+ deflateInit2(), and after deflateSetHeader(), if used. This would be used
+ to allocate an output buffer for deflation in a single pass, and so would be
+ called before deflate().
+*/
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ deflatePrime() inserts bits in the deflate output stream. The intent
+ is that this function is used to start off the deflate output with the bits
+ leftover from a previous deflate stream when appending to it. As such, this
+ function can only be used for raw deflate, and must be used before the first
+ deflate() call after a deflateInit2() or deflateReset(). bits must be less
+ than or equal to 16, and that many of the least significant bits of value
+ will be inserted in the output.
+
+ deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ deflateSetHeader() provides gzip header information for when a gzip
+ stream is requested by deflateInit2(). deflateSetHeader() may be called
+ after deflateInit2() or deflateReset() and before the first call of
+ deflate(). The text, time, os, extra field, name, and comment information
+ in the provided gz_header structure are written to the gzip header (xflag is
+ ignored -- the extra flags are set according to the compression level). The
+ caller must assure that, if not Z_NULL, name and comment are terminated with
+ a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+ available there. If hcrc is true, a gzip header crc is included. Note that
+ the current versions of the command-line version of gzip (up through version
+ 1.3.x) do not support header crc's, and will report that it is a "multi-part
+ gzip file" and give up.
+
+ If deflateSetHeader is not used, the default gzip header has text false,
+ the time set to zero, and os set to 255, with no extra, name, or comment
+ fields. The gzip header is returned to the default state by deflateReset().
+
+ deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+ int windowBits));
+
+ This is another version of inflateInit with an extra parameter. The
+ fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+ before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. windowBits must be greater than or equal to the windowBits value
+ provided to deflateInit2() while compressing, or it must be equal to 15 if
+ deflateInit2() was not used. If a compressed stream with a larger window
+ size is given as input, inflate() will return with the error code
+ Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ windowBits can also be zero to request that inflate use the window size in
+ the zlib header of the compressed stream.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
+ not looking for a zlib or gzip header, not generating a check value, and not
+ looking for any check values for comparison at the end of the stream. This
+ is for use with other formats that use the deflate compressed data format
+ such as zip. Those formats provide their own check values. If a custom
+ format is developed using the raw deflate format for compressed data, it is
+ recommended that a check value such as an adler32 or a crc32 be applied to
+ the uncompressed data as is done in the zlib, gzip, and zip formats. For
+ most applications, the zlib format should be used as is. Note that comments
+ above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+ windowBits can also be greater than 15 for optional gzip decoding. Add
+ 32 to windowBits to enable zlib and gzip decoding with automatic header
+ detection, or add 16 to decode only the gzip format (the zlib format will
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
+ crc32 instead of an adler32.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit2 does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit2() does not process any header information -- that is
+ deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the adler32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called
+ immediately after inflateInit2() or inflateReset() and before any call of
+ inflate() to set the dictionary. The application must insure that the
+ dictionary that was used for compression is provided.
+
+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+ expected one (incorrect adler32 value). inflateSetDictionary does not
+ perform any decompression: this will be done by subsequent calls of
+ inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+ Skips invalid compressed data until a full flush point (see above the
+ description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+ if no more input was provided, Z_DATA_ERROR if no flush point has been
+ found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the
+ success case, the application may save the current current value of total_in
+ which indicates where valid compressed data was found. In the error case,
+ the application may repeatedly call inflateSync, providing more input each
+ time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when randomly accessing a large stream. The
+ first pass through the stream can periodically record the inflate state,
+ allowing restarting inflate at those points when randomly accessing the
+ stream.
+
+ inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state. The
+ stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+ int windowBits));
+/*
+ This function is the same as inflateReset, but it also permits changing
+ the wrap and window size requests. The windowBits parameter is interpreted
+ the same as it is for inflateInit2.
+
+ inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+ the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ If bits is negative, then the input stream bit buffer is emptied. Then
+ inflatePrime() can be called again to put bits in the buffer. This is used
+ to clear out bits leftover after feeding inflate a block description prior
+ to feeding inflate codes.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+ This function returns two values, one in the lower 16 bits of the return
+ value, and the other in the remaining upper bits, obtained by shifting the
+ return value down 16 bits. If the upper value is -1 and the lower value is
+ zero, then inflate() is currently decoding information outside of a block.
+ If the upper value is -1 and the lower value is non-zero, then inflate is in
+ the middle of a stored block, with the lower value equaling the number of
+ bytes from the input remaining to copy. If the upper value is not -1, then
+ it is the number of bits back from the current bit position in the input of
+ the code (literal or length/distance pair) currently being processed. In
+ that case the lower value is the number of bytes already emitted for that
+ code.
+
+ A code is being processed if inflate is waiting for more input to complete
+ decoding of the code, or if it has completed decoding but is waiting for
+ more output space to write the literal or match data.
+
+ inflateMark() is used to mark locations in the input data for random
+ access, which may be at bit positions, and to note those cases where the
+ output of a code may span boundaries of random access blocks. The current
+ location in the input stream can be determined from avail_in and data_type
+ as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+ inflateMark returns the value noted above or -1 << 16 if the provided
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ inflateGetHeader() requests that gzip header information be stored in the
+ provided gz_header structure. inflateGetHeader() may be called after
+ inflateInit2() or inflateReset(), and before the first call of inflate().
+ As inflate() processes the gzip stream, head->done is zero until the header
+ is completed, at which time head->done is set to one. If a zlib stream is
+ being decoded, then head->done is set to -1 to indicate that there will be
+ no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
+ used to force inflate() to return immediately after header processing is
+ complete and before any actual data is decompressed.
+
+ The text, time, xflags, and os fields are filled in with the gzip header
+ contents. hcrc is set to true if there is a header CRC. (The header CRC
+ was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+ contains the maximum number of bytes to write to extra. Once done is true,
+ extra_len contains the actual extra field length, and extra contains the
+ extra field, or that field truncated if extra_max is less than extra_len.
+ If name is not Z_NULL, then up to name_max characters are written there,
+ terminated with a zero unless the length is greater than name_max. If
+ comment is not Z_NULL, then up to comm_max characters are written there,
+ terminated with a zero unless the length is greater than comm_max. When any
+ of extra, name, or comment are not Z_NULL and the respective field is not
+ present in the header, then that field is set to Z_NULL to signal its
+ absence. This allows the use of deflateSetHeader() with the returned
+ structure to duplicate the header. However if those fields are set to
+ allocated memory, then the application will need to save those pointers
+ elsewhere so that they can be eventually freed.
+
+ If inflateGetHeader is not used, then the header information is simply
+ discarded. The header is always checked for validity, including the header
+ CRC if present. inflateReset() will reset the process to discard the header
+ information. The application would need to call inflateGetHeader() again to
+ retrieve the header from the next gzip stream.
+
+ inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window));
+
+ Initialize the internal stream state for decompression using inflateBack()
+ calls. The fields zalloc, zfree and opaque in strm must be initialized
+ before the call. If zalloc and zfree are Z_NULL, then the default library-
+ derived memory allocation routines are used. windowBits is the base two
+ logarithm of the window size, in the range 8..15. window is a caller
+ supplied buffer of that size. Except for special applications where it is
+ assured that deflate was used with small window sizes, windowBits must be 15
+ and a 32K byte window must be supplied to be able to decompress general
+ deflate streams.
+
+ See inflateBack() for the usage of these routines.
+
+ inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+ the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+ allocated, or Z_VERSION_ERROR if the version of the library does not match
+ the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+ in_func in, void FAR *in_desc,
+ out_func out, void FAR *out_desc));
+/*
+ inflateBack() does a raw inflate with a single call using a call-back
+ interface for input and output. This is more efficient than inflate() for
+ file i/o applications in that it avoids copying between the output and the
+ sliding window by simply making the window itself the output buffer. This
+ function trusts the application to not change the output buffer passed by
+ the output function, at least until inflateBack() returns.
+
+ inflateBackInit() must be called first to allocate the internal state
+ and to initialize the state with the user-provided window buffer.
+ inflateBack() may then be used multiple times to inflate a complete, raw
+ deflate stream with each call. inflateBackEnd() is then called to free the
+ allocated state.
+
+ A raw deflate stream is one with no zlib or gzip header or trailer.
+ This routine would normally be used in a utility that reads zip or gzip
+ files and writes out uncompressed files. The utility would decode the
+ header and process the trailer on its own, hence this routine expects only
+ the raw deflate stream to decompress. This is different from the normal
+ behavior of inflate(), which expects either a zlib or gzip header and
+ trailer around the deflate stream.
+
+ inflateBack() uses two subroutines supplied by the caller that are then
+ called by inflateBack() for input and output. inflateBack() calls those
+ routines until it reads a complete deflate stream and writes out all of the
+ uncompressed data, or until it encounters an error. The function's
+ parameters and return types are defined above in the in_func and out_func
+ typedefs. inflateBack() will call in(in_desc, &buf) which should return the
+ number of bytes of provided input, and a pointer to that input in buf. If
+ there is no input available, in() must return zero--buf is ignored in that
+ case--and inflateBack() will return a buffer error. inflateBack() will call
+ out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
+ should return zero on success, or non-zero on failure. If out() returns
+ non-zero, inflateBack() will return with an error. Neither in() nor out()
+ are permitted to change the contents of the window provided to
+ inflateBackInit(), which is also the buffer that out() uses to write from.
+ The length written by out() will be at most the window size. Any non-zero
+ amount of input may be provided by in().
+
+ For convenience, inflateBack() can be provided input on the first call by
+ setting strm->next_in and strm->avail_in. If that input is exhausted, then
+ in() will be called. Therefore strm->next_in must be initialized before
+ calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
+ immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
+ must also be initialized, and then if strm->avail_in is not zero, input will
+ initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+
+ The in_desc and out_desc parameters of inflateBack() is passed as the
+ first parameter of in() and out() respectively when they are called. These
+ descriptors can be optionally used to pass any information that the caller-
+ supplied in() and out() functions need to do their job.
+
+ On return, inflateBack() will set strm->next_in and strm->avail_in to
+ pass back any unused input that was provided by the last in() call. The
+ return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+ if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+ in the deflate stream (in which case strm->msg is set to indicate the nature
+ of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+ In the case of Z_BUF_ERROR, an input or output error can be distinguished
+ using strm->next_in which will be Z_NULL only if in() returned an error. If
+ strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+ non-zero. (in() will always be called before out(), so strm->next_in is
+ assured to be defined if out() returns non-zero.) Note that inflateBack()
+ cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+ All memory allocated by inflateBackInit() is freed.
+
+ inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+ state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+ Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+ 1.0: size of uInt
+ 3.2: size of uLong
+ 5.4: size of voidpf (pointer)
+ 7.6: size of z_off_t
+
+ Compiler, assembler, and debug options:
+ 8: DEBUG
+ 9: ASMV or ASMINF -- use ASM code
+ 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+ 11: 0 (reserved)
+
+ One-time table building (smaller code, but not thread-safe if true):
+ 12: BUILDFIXED -- build static block decoding tables when needed
+ 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+ 14,15: 0 (reserved)
+
+ Library content (indicates missing functionality):
+ 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+ deflate code when not needed)
+ 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+ and decode gzip streams (to avoid linking crc code)
+ 18-19: 0 (reserved)
+
+ Operation variations (changes in library functionality):
+ 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+ 21: FASTEST -- deflate algorithm with only one, lowest compression level
+ 22,23: 0 (reserved)
+
+ The sprintf variant used by gzprintf (zero is best):
+ 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+ 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+ 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+ Remainder:
+ 27-31: 0 (reserved)
+ */
+
+
+ /* utility functions */
+
+/*
+ The following utility functions are implemented on top of the basic
+ stream-oriented functions. To simplify the interface, some default options
+ are assumed (compression level and memory usage, standard memory allocation
+ functions). The source code of these utility functions can be modified if
+ you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed buffer.
+
+ compress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen,
+ int level));
+/*
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed buffer.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+ compressBound() returns an upper bound on the compressed size after
+ compress() or compress2() on sourceLen bytes. It would be used before a
+ compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be large enough to hold the entire
+ uncompressed data. (The size of the uncompressed data must have been saved
+ previously by the compressor and transmitted to the decompressor by some
+ mechanism outside the scope of this compression library.) Upon exit, destLen
+ is the actual size of the uncompressed buffer.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
+*/
+
+
+ /* gzip file access functions */
+
+/*
+ This library supports reading and writing files in gzip (.gz) format with
+ an interface similar to that of stdio, using the functions that start with
+ "gz". The gzip format is different from the zlib format. gzip is a gzip
+ wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef voidp gzFile; /* opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+ Opens a gzip (.gz) file for reading or writing. The mode parameter is as
+ in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+ a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+ compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+ for fixed code compression as in "wb9F". (See the description of
+ deflateInit2 for more information about the strategy parameter.) Also "a"
+ can be used instead of "w" to request that the gzip stream that will be
+ written be appended to the file. "+" will result in an error, since reading
+ and writing to the same gzip file is not supported.
+
+ gzopen can be used to read a file which is not in gzip format; in this
+ case gzread will directly read from the file without decompression.
+
+ gzopen returns NULL if the file could not be opened, if there was
+ insufficient memory to allocate the gzFile state, or if an invalid mode was
+ specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+ errno can be checked to determine if the reason gzopen failed was that the
+ file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+ gzdopen associates a gzFile with the file descriptor fd. File descriptors
+ are obtained from calls like open, dup, creat, pipe or fileno (if the file
+ has been previously opened with fopen). The mode parameter is as in gzopen.
+
+ The next call of gzclose on the returned gzFile will also close the file
+ descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+ fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+ mode);. The duplicated descriptor should be saved to avoid a leak, since
+ gzdopen does not close fd if it fails.
+
+ gzdopen returns NULL if there was insufficient memory to allocate the
+ gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+ provided, or '+' was provided), or if fd is -1. The file descriptor is not
+ used until the next gz* read, write, seek, or close operation, so gzdopen
+ will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+ Set the internal buffer size used by this library's functions. The
+ default buffer size is 8192 bytes. This function must be called after
+ gzopen() or gzdopen(), and before any other calls that read or write the
+ file. The buffer memory allocation is always deferred to the first read or
+ write. Two buffers are allocated, either both of the specified size when
+ writing, or one of the specified size and the other twice that size when
+ reading. A larger buffer size of, for example, 64K or 128K bytes will
+ noticeably increase the speed of decompression (reading).
+
+ The new buffer size also affects the maximum length for gzprintf().
+
+ gzbuffer() returns 0 on success, or -1 on failure, such as being called
+ too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+ Dynamically update the compression level or strategy. See the description
+ of deflateInit2 for the meaning of these parameters.
+
+ gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+ opened for writing.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+ Reads the given number of uncompressed bytes from the compressed file. If
+ the input file was not in gzip format, gzread copies the given number of
+ bytes into the buffer.
+
+ After reaching the end of a gzip stream in the input, gzread will continue
+ to read, looking for another gzip stream, or failing that, reading the rest
+ of the input file directly without decompression. The entire input file
+ will be read if gzread is called until it returns less than the requested
+ len.
+
+ gzread returns the number of uncompressed bytes actually read, less than
+ len for end of file, or -1 for error.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+ voidpc buf, unsigned len));
+/*
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of uncompressed bytes written or 0 in case of
+ error.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+/*
+ Converts, formats, and writes the arguments to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written, or 0 in case of error. The number of
+ uncompressed bytes written is limited to 8191, or one less than the buffer
+ size given to gzbuffer(). The caller should assure that this limit is not
+ exceeded. If it is exceeded, then gzprintf() will return an error (0) with
+ nothing written. In this case, there may also be a buffer overflow with
+ unpredictable consequences, which is possible only if zlib was compiled with
+ the insecure functions sprintf() or vsprintf() because the secure snprintf()
+ or vsnprintf() functions were not available. This can be determined using
+ zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+ Reads bytes from the compressed file until len-1 characters are read, or a
+ newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. If any characters are read or if len == 1, the
+ string is terminated with a null character. If no characters are read due
+ to an end-of-file or len < 1, then the buffer is left untouched.
+
+ gzgets returns buf which is a null-terminated string, or it returns NULL
+ for end-of-file or in case of error. If there was an error, the contents at
+ buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+ Writes c, converted to an unsigned char, into the compressed file. gzputc
+ returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+ Reads one byte from the compressed file. gzgetc returns this byte or -1
+ in case of end of file or error.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+ Push one character back onto the stream to be read as the first character
+ on the next read. At least one character of push-back is allowed.
+ gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
+ fail if c is -1, and may fail if a character has been pushed but not read
+ yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
+ output buffer size of pushed characters is allowed. (See gzbuffer above.)
+ The pushed character will be discarded if the stream is repositioned with
+ gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+ Flushes all pending output into the compressed file. The parameter flush
+ is as in the deflate() function. The return value is the zlib error number
+ (see function gzerror below). gzflush is only permitted when writing.
+
+ If the flush parameter is Z_FINISH, the remaining data is written and the
+ gzip stream is completed in the output. If gzwrite() is called again, a new
+ gzip stream will be started in the output. gzread() is able to read such
+ concatented gzip streams.
+
+ gzflush should be called only when strictly necessary because it will
+ degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+ z_off_t offset, int whence));
+
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported; gzseek then compresses a sequence of zeroes up to the new
+ starting position.
+
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
+/*
+ Rewinds the given file. This function is supported only for reading.
+
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
+
+ Returns the starting position for the next gzread or gzwrite on the given
+ compressed file. This position represents a number of bytes in the
+ uncompressed data stream, and is zero when starting, even if appending or
+ reading a gzip stream from the middle of a file using gzdopen().
+
+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+ Returns the current offset in the file being read or written. This offset
+ includes the count of bytes that precede the gzip stream, for example when
+ appending or when using gzdopen() for reading. When reading, the offset
+ does not include as yet unused buffered input. This information can be used
+ for a progress indicator. On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+ Returns true (1) if the end-of-file indicator has been set while reading,
+ false (0) otherwise. Note that the end-of-file indicator is set only if the
+ read tried to go past the end of the input, but came up short. Therefore,
+ just like feof(), gzeof() may return false even if there is no more data to
+ read, in the event that the last read request was for the exact number of
+ bytes remaining in the input file. This will happen if the input file size
+ is an exact multiple of the buffer size.
+
+ If gzeof() returns true, then the read functions will return no more data,
+ unless the end-of-file indicator is reset by gzclearerr() and the input file
+ has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+ Returns true (1) if file is being copied directly while reading, or false
+ (0) if file is a gzip stream being decompressed. This state can change from
+ false to true while reading the input file if the end of a gzip stream is
+ reached, but is followed by data that is not another gzip stream.
+
+ If the input file is empty, gzdirect() will return true, since the input
+ does not contain a gzip stream.
+
+ If gzdirect() is used immediately after gzopen() or gzdopen() it will
+ cause buffers to be allocated to allow reading the file to determine if it
+ is a gzip file. Therefore if gzbuffer() is used, it should be called before
+ gzdirect().
+*/
+
+ZEXTERN int ZEXPORT gzclose OF((gzFile file));
+/*
+ Flushes all pending output if necessary, closes the compressed file and
+ deallocates the (de)compression state. Note that once file is closed, you
+ cannot call gzerror with file, since its structures have been deallocated.
+ gzclose must not be called more than once on the same file, just as free
+ must not be called more than once on the same allocation.
+
+ gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+ file operation error, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+ Same as gzclose(), but gzclose_r() is only for use when reading, and
+ gzclose_w() is only for use when writing or appending. The advantage to
+ using these instead of gzclose() is that they avoid linking in zlib
+ compression or decompression code that is not used when only reading or only
+ writing respectively. If gzclose() is used, then both compression and
+ decompression code will be included the application when linking to a static
+ zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+ Returns the error message for the last error which occurred on the given
+ compressed file. errnum is set to zlib error number. If an error occurred
+ in the file system and not in the compression library, errnum is set to
+ Z_ERRNO and the application may consult errno to get the exact error code.
+
+ The application must not modify the returned string. Future calls to
+ this function may invalidate the previously returned string. If file is
+ closed, then the string previously returned by gzerror will no longer be
+ available.
+
+ gzerror() should be used to distinguish errors from end-of-file for those
+ functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+ Clears the error and end-of-file flags for file. This is analogous to the
+ clearerr() function in stdio. This is useful for continuing to read a gzip
+ file that is being written concurrently.
+*/
+
+
+ /* checksum functions */
+
+/*
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the compression
+ library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is Z_NULL, this function returns the
+ required initial value for the checksum.
+
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster.
+
+ Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+ z_off_t len2));
+
+ Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
+ and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+ each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
+ seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+/*
+ Update a running CRC-32 with the bytes buf[0..len-1] and return the
+ updated CRC-32. If buf is Z_NULL, this function returns the required
+ initial value for the for the crc. Pre- and post-conditioning (one's
+ complement) is performed within this function so it shouldn't be done by the
+ application.
+
+ Usage example:
+
+ uLong crc = crc32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = crc32(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+ Combine two CRC-32 check values into one. For two sequences of bytes,
+ seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+ calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
+ check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+ len2.
+*/
+
+
+ /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy, const char *version,
+ int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window,
+ const char *version,
+ int stream_size));
+#define deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+#define inflateBackInit(strm, windowBits, window) \
+ inflateBackInit_((strm), (windowBits), (window), \
+ ZLIB_VERSION, sizeof(z_stream))
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+# define gzopen gzopen64
+# define gzseek gzseek64
+# define gztell gztell64
+# define gzoffset gzoffset64
+# define adler32_combine adler32_combine64
+# define crc32_combine crc32_combine64
+# ifdef _LARGEFILE64_SOURCE
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+# endif
+#else
+ ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+/* hack for buggy compilers */
+#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
+ struct internal_state {int dummy;};
+#endif
+
+/* undocumented functions */
+ZEXTERN const char * ZEXPORT zError OF((int));
+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
+ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
diff --git a/heimdall-frontend/lib/win32/zlib.lib b/heimdall-frontend/lib/win32/zlib.lib
new file mode 100755
index 0000000..9da4aeb
--- /dev/null
+++ b/heimdall-frontend/lib/win32/zlib.lib
Binary files differ
diff --git a/heimdall-frontend/mainwindow.ui b/heimdall-frontend/mainwindow.ui
index 300be65..6165b8d 100644
--- a/heimdall-frontend/mainwindow.ui
+++ b/heimdall-frontend/mainwindow.ui
@@ -6,8 +6,8 @@
<rect>
<x>0</x>
<y>0</y>
- <width>902</width>
- <height>523</height>
+ <width>788</width>
+ <height>505</height>
</rect>
</property>
<property name="sizePolicy">
@@ -18,18 +18,18 @@
</property>
<property name="minimumSize">
<size>
- <width>902</width>
- <height>523</height>
+ <width>788</width>
+ <height>505</height>
</size>
</property>
<property name="maximumSize">
<size>
- <width>902</width>
- <height>523</height>
+ <width>788</width>
+ <height>505</height>
</size>
</property>
<property name="windowTitle">
- <string notr="true">Heimdall Frontend 1.1</string>
+ <string notr="true">Heimdall Frontend</string>
</property>
<property name="toolTip">
<string notr="true"/>
@@ -65,12 +65,15 @@
</font>
</property>
<widget class="QTabWidget" name="functionTabWidget">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
<property name="geometry">
<rect>
- <x>10</x>
+ <x>5</x>
<y>0</y>
- <width>881</width>
- <height>491</height>
+ <width>780</width>
+ <height>481</height>
</rect>
</property>
<property name="sizePolicy">
@@ -79,161 +82,416 @@
<verstretch>0</verstretch>
</sizepolicy>
</property>
+ <property name="minimumSize">
+ <size>
+ <width>780</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="maximumSize">
+ <size>
+ <width>780</width>
+ <height>780</height>
+ </size>
+ </property>
<property name="currentIndex">
<number>0</number>
</property>
+ <property name="usesScrollButtons">
+ <bool>false</bool>
+ </property>
+ <widget class="QWidget" name="loadPackageTab">
+ <attribute name="title">
+ <string>Load Package</string>
+ </attribute>
+ <widget class="QGroupBox" name="includedFilesGroup">
+ <property name="geometry">
+ <rect>
+ <x>510</x>
+ <y>20</y>
+ <width>251</width>
+ <height>341</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>Included Files</string>
+ </property>
+ <widget class="QListWidget" name="includedFilesListWidget">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>231</width>
+ <height>311</height>
+ </rect>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QGroupBox" name="platformGroup">
+ <property name="geometry">
+ <rect>
+ <x>350</x>
+ <y>80</y>
+ <width>151</width>
+ <height>61</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>Platform</string>
+ </property>
+ <widget class="QLineEdit" name="platformLineEdit">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>131</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QGroupBox" name="supportedDevicesGroup">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>220</y>
+ <width>491</width>
+ <height>231</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>Supported Devices</string>
+ </property>
+ <widget class="QListWidget" name="supportedDevicesListWidget">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>471</width>
+ <height>201</height>
+ </rect>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QRadioButton" name="repartitionRadioButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>520</x>
+ <y>370</y>
+ <width>241</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Repartition Recommended</string>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="loadFirmwareButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>580</x>
+ <y>410</y>
+ <width>121</width>
+ <height>31</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Load / Customise</string>
+ </property>
+ </widget>
+ <widget class="QGroupBox" name="firmwareNameGroup">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>80</y>
+ <width>221</width>
+ <height>61</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>Firmware Name</string>
+ </property>
+ <widget class="QLineEdit" name="firmwareNameLineEdit">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>201</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QGroupBox" name="firmwarePackageGroup">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>10</y>
+ <width>491</width>
+ <height>61</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>Heimdall Firmware Package</string>
+ </property>
+ <widget class="QLineEdit" name="firmwarePackageLineEdit">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>391</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>true</bool>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="browseFirmwarePackageButton">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>410</x>
+ <y>20</y>
+ <width>71</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Browse</string>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QGroupBox" name="versionGroup">
+ <property name="geometry">
+ <rect>
+ <x>240</x>
+ <y>80</y>
+ <width>101</width>
+ <height>61</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>Version</string>
+ </property>
+ <widget class="QLineEdit" name="versionLineEdit">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>81</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QGroupBox" name="developerGroup">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>150</y>
+ <width>491</width>
+ <height>61</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>Developer(s)</string>
+ </property>
+ <widget class="QLineEdit" name="developerNamesLineEdit">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>311</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>true</bool>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="developerDonateButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>410</x>
+ <y>20</y>
+ <width>71</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Donate</string>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="developerHomepageButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>330</x>
+ <y>20</y>
+ <width>71</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Homepage</string>
+ </property>
+ </widget>
+ </widget>
+ </widget>
<widget class="QWidget" name="flashTab">
<attribute name="title">
<string>Flash</string>
</attribute>
- <widget class="QGroupBox" name="pdaGroupBox">
+ <widget class="QGroupBox" name="statusGroup">
<property name="geometry">
<rect>
<x>10</x>
- <y>120</y>
- <width>421</width>
- <height>331</height>
+ <y>290</y>
+ <width>751</width>
+ <height>161</height>
</rect>
</property>
<property name="title">
- <string>PDA/Code</string>
+ <string>Status</string>
</property>
- <widget class="QGroupBox" name="factoryfsGroupBox">
+ <widget class="QProgressBar" name="flashProgressBar">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>320</x>
+ <y>120</y>
+ <width>311</width>
+ <height>31</height>
+ </rect>
+ </property>
+ <property name="value">
+ <number>0</number>
+ </property>
+ </widget>
+ <widget class="QPlainTextEdit" name="outputPlainTextEdit">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
<property name="geometry">
<rect>
<x>10</x>
<y>20</y>
- <width>401</width>
- <height>61</height>
+ <width>731</width>
+ <height>91</height>
</rect>
</property>
- <property name="title">
- <string>FactoryFS</string>
- </property>
- <widget class="QLineEdit" name="factoryfsLineEdit">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>30</x>
- <y>30</y>
- <width>281</width>
- <height>21</height>
- </rect>
- </property>
- <property name="readOnly">
- <bool>true</bool>
- </property>
- </widget>
- <widget class="QPushButton" name="factoryfsBrowseButton">
- <property name="geometry">
- <rect>
- <x>320</x>
- <y>30</y>
- <width>71</width>
- <height>23</height>
- </rect>
- </property>
- <property name="text">
- <string>Browse</string>
- </property>
- </widget>
- <widget class="QCheckBox" name="factoryfsCheckBox">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>10</x>
- <y>30</y>
- <width>21</width>
- <height>21</height>
- </rect>
- </property>
- <property name="text">
- <string/>
- </property>
- </widget>
</widget>
- <widget class="QGroupBox" name="kernelGroupBox">
+ <widget class="QLabel" name="flashLabel">
<property name="geometry">
<rect>
<x>10</x>
- <y>80</y>
- <width>401</width>
- <height>61</height>
+ <y>120</y>
+ <width>301</width>
+ <height>21</height>
</rect>
</property>
- <property name="title">
- <string>Kernel (zImage)</string>
+ <property name="layoutDirection">
+ <enum>Qt::RightToLeft</enum>
+ </property>
+ <property name="text">
+ <string notr="true">Ready</string>
+ </property>
+ <property name="textFormat">
+ <enum>Qt::PlainText</enum>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignBottom|Qt::AlignLeading|Qt::AlignLeft</set>
</property>
- <widget class="QLineEdit" name="kernelLineEdit">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>30</x>
- <y>30</y>
- <width>281</width>
- <height>21</height>
- </rect>
- </property>
- <property name="readOnly">
- <bool>true</bool>
- </property>
- </widget>
- <widget class="QPushButton" name="kernelBrowseButton">
- <property name="geometry">
- <rect>
- <x>320</x>
- <y>30</y>
- <width>71</width>
- <height>23</height>
- </rect>
- </property>
- <property name="text">
- <string>Browse</string>
- </property>
- </widget>
- <widget class="QCheckBox" name="kernelCheckBox">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>10</x>
- <y>30</y>
- <width>21</width>
- <height>21</height>
- </rect>
- </property>
- <property name="text">
- <string/>
- </property>
- </widget>
</widget>
- <widget class="QGroupBox" name="primaryBootGroupBox">
+ <widget class="QPushButton" name="startFlashButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>640</x>
+ <y>120</y>
+ <width>91</width>
+ <height>31</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Start</string>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QGroupBox" name="optionsGroup">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>10</y>
+ <width>751</width>
+ <height>271</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>Options</string>
+ </property>
+ <widget class="QGroupBox" name="pitGroup">
<property name="geometry">
<rect>
<x>10</x>
- <y>200</y>
- <width>401</width>
- <height>61</height>
+ <y>20</y>
+ <width>381</width>
+ <height>91</height>
</rect>
</property>
<property name="title">
- <string>Primary Bootloader</string>
+ <string>PIT</string>
</property>
- <widget class="QLineEdit" name="primaryBootLineEdit">
+ <widget class="QLineEdit" name="pitLineEdit">
<property name="enabled">
<bool>false</bool>
</property>
<property name="geometry">
<rect>
- <x>30</x>
- <y>30</y>
+ <x>10</x>
+ <y>50</y>
<width>281</width>
<height>21</height>
</rect>
@@ -242,11 +500,14 @@
<bool>true</bool>
</property>
</widget>
- <widget class="QPushButton" name="primaryBootBrowseButton">
+ <widget class="QPushButton" name="pitBrowseButton">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
<property name="geometry">
<rect>
- <x>320</x>
- <y>30</y>
+ <x>300</x>
+ <y>50</y>
<width>71</width>
<height>23</height>
</rect>
@@ -255,573 +516,647 @@
<string>Browse</string>
</property>
</widget>
- <widget class="QCheckBox" name="primaryBootCheckBox">
+ <widget class="QCheckBox" name="repartitionCheckBox">
<property name="enabled">
<bool>false</bool>
</property>
<property name="geometry">
<rect>
<x>10</x>
- <y>30</y>
- <width>21</width>
- <height>21</height>
+ <y>20</y>
+ <width>91</width>
+ <height>17</height>
</rect>
</property>
<property name="text">
- <string/>
+ <string>Repartition</string>
</property>
</widget>
</widget>
- <widget class="QGroupBox" name="secondaryBootGroupBox">
+ <widget class="QPushButton" name="removePartitionButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>670</x>
+ <y>230</y>
+ <width>71</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Remove</string>
+ </property>
+ </widget>
+ <widget class="QGroupBox" name="partitionGroup">
<property name="geometry">
<rect>
<x>10</x>
- <y>260</y>
- <width>401</width>
- <height>61</height>
+ <y>120</y>
+ <width>381</width>
+ <height>141</height>
</rect>
</property>
<property name="title">
- <string>Secondary Bootloader</string>
+ <string>File / Partition</string>
</property>
- <widget class="QLineEdit" name="secondaryBootLineEdit">
+ <widget class="QComboBox" name="partitionNameComboBox">
<property name="enabled">
<bool>false</bool>
</property>
<property name="geometry">
<rect>
- <x>30</x>
- <y>30</y>
- <width>281</width>
- <height>21</height>
+ <x>110</x>
+ <y>20</y>
+ <width>261</width>
+ <height>22</height>
</rect>
</property>
- <property name="readOnly">
- <bool>true</bool>
- </property>
</widget>
- <widget class="QPushButton" name="secondaryBootBrowseButton">
+ <widget class="QLabel" name="partitionNameLabel">
<property name="geometry">
<rect>
- <x>320</x>
- <y>30</y>
- <width>71</width>
- <height>23</height>
+ <x>10</x>
+ <y>20</y>
+ <width>91</width>
+ <height>16</height>
</rect>
</property>
<property name="text">
- <string>Browse</string>
+ <string>Partition Name</string>
</property>
</widget>
- <widget class="QCheckBox" name="secondaryBootCheckBox">
- <property name="enabled">
- <bool>false</bool>
- </property>
+ <widget class="QLabel" name="partitionIdLabel">
<property name="geometry">
<rect>
<x>10</x>
- <y>30</y>
- <width>21</width>
- <height>21</height>
+ <y>50</y>
+ <width>91</width>
+ <height>16</height>
</rect>
</property>
<property name="text">
- <string/>
+ <string>Partition ID</string>
</property>
</widget>
- </widget>
- <widget class="QGroupBox" name="paramGroupBox">
- <property name="geometry">
- <rect>
- <x>10</x>
- <y>140</y>
- <width>401</width>
- <height>61</height>
- </rect>
- </property>
- <property name="title">
- <string>Param.lfs</string>
- </property>
- <widget class="QLineEdit" name="paramLineEdit">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>30</x>
- <y>30</y>
- <width>281</width>
- <height>21</height>
- </rect>
- </property>
- <property name="readOnly">
- <bool>true</bool>
- </property>
- </widget>
- <widget class="QPushButton" name="paramBrowseButton">
+ <widget class="QGroupBox" name="partitionFileGroup">
<property name="geometry">
<rect>
- <x>320</x>
- <y>30</y>
- <width>71</width>
- <height>23</height>
+ <x>10</x>
+ <y>80</y>
+ <width>361</width>
+ <height>51</height>
</rect>
</property>
- <property name="text">
- <string>Browse</string>
- </property>
+ <property name="title">
+ <string>File</string>
+ </property>
+ <widget class="QLineEdit" name="partitionFileLineEdit">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>261</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>true</bool>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="partitionFileBrowseButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>280</x>
+ <y>20</y>
+ <width>71</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Browse</string>
+ </property>
+ </widget>
</widget>
- <widget class="QCheckBox" name="paramCheckBox">
+ <widget class="QLineEdit" name="partitionIdLineEdit">
<property name="enabled">
<bool>false</bool>
</property>
<property name="geometry">
<rect>
- <x>10</x>
- <y>30</y>
- <width>21</width>
+ <x>110</x>
+ <y>50</y>
+ <width>261</width>
<height>21</height>
</rect>
</property>
- <property name="text">
- <string/>
+ <property name="readOnly">
+ <bool>true</bool>
</property>
</widget>
</widget>
+ <widget class="QPushButton" name="addPartitionButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>400</x>
+ <y>230</y>
+ <width>71</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Add</string>
+ </property>
+ </widget>
+ <widget class="QListWidget" name="partitionsListWidget">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>400</x>
+ <y>20</y>
+ <width>341</width>
+ <height>201</height>
+ </rect>
+ </property>
+ </widget>
</widget>
- <widget class="QGroupBox" name="cscGroupBox">
+ </widget>
+ <widget class="QWidget" name="createPackageTab">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
+ <attribute name="title">
+ <string>Create Package</string>
+ </attribute>
+ <widget class="QGroupBox" name="createSupportedDevicesGroup">
<property name="geometry">
<rect>
- <x>440</x>
- <y>10</y>
- <width>421</width>
- <height>151</height>
+ <x>0</x>
+ <y>230</y>
+ <width>491</width>
+ <height>221</height>
</rect>
</property>
<property name="title">
- <string>CSC</string>
+ <string>Supported Devices</string>
</property>
- <widget class="QGroupBox" name="cacheGroupBox">
+ <widget class="QListWidget" name="createDevicesListWidget">
<property name="geometry">
<rect>
<x>10</x>
<y>20</y>
- <width>401</width>
- <height>61</height>
+ <width>471</width>
+ <height>151</height>
</rect>
</property>
- <property name="title">
- <string>Cache</string>
- </property>
- <widget class="QLineEdit" name="cacheLineEdit">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>30</x>
- <y>30</y>
- <width>281</width>
- <height>21</height>
- </rect>
- </property>
- <property name="readOnly">
- <bool>true</bool>
- </property>
- </widget>
- <widget class="QPushButton" name="cacheBrowseButton">
- <property name="geometry">
- <rect>
- <x>320</x>
- <y>30</y>
- <width>71</width>
- <height>23</height>
- </rect>
- </property>
- <property name="text">
- <string>Browse</string>
- </property>
- </widget>
- <widget class="QCheckBox" name="cacheCheckBox">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>10</x>
- <y>30</y>
- <width>21</width>
- <height>21</height>
- </rect>
- </property>
- <property name="text">
- <string/>
- </property>
- </widget>
</widget>
- <widget class="QGroupBox" name="databaseGroupBox">
+ <widget class="QPushButton" name="removeDeviceButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
<property name="geometry">
<rect>
- <x>10</x>
- <y>80</y>
- <width>401</width>
- <height>61</height>
+ <x>380</x>
+ <y>180</y>
+ <width>101</width>
+ <height>23</height>
</rect>
</property>
- <property name="title">
- <string>Database Data</string>
+ <property name="text">
+ <string>Remove Device</string>
</property>
- <widget class="QLineEdit" name="databaseLineEdit">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>30</x>
- <y>30</y>
- <width>281</width>
- <height>21</height>
- </rect>
- </property>
- <property name="readOnly">
- <bool>true</bool>
- </property>
- </widget>
- <widget class="QPushButton" name="databaseBrowseButton">
- <property name="geometry">
- <rect>
- <x>320</x>
- <y>30</y>
- <width>71</width>
- <height>23</height>
- </rect>
- </property>
- <property name="text">
- <string>Browse</string>
- </property>
- </widget>
- <widget class="QCheckBox" name="databaseCheckBox">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>10</x>
- <y>30</y>
- <width>21</width>
- <height>21</height>
- </rect>
- </property>
- <property name="text">
- <string/>
- </property>
- </widget>
</widget>
</widget>
- <widget class="QGroupBox" name="repartitionGroupBox">
+ <widget class="QGroupBox" name="createFirmwareVersionGroup">
<property name="geometry">
<rect>
- <x>10</x>
+ <x>240</x>
<y>10</y>
- <width>421</width>
- <height>111</height>
+ <width>111</width>
+ <height>61</height>
</rect>
</property>
<property name="title">
- <string>Repartition</string>
+ <string>Firmware Version</string>
</property>
- <widget class="QGroupBox" name="pitGroupBox">
+ <widget class="QLineEdit" name="createFirmwareVersionLineEdit">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
<property name="geometry">
<rect>
<x>10</x>
<y>20</y>
- <width>401</width>
- <height>81</height>
+ <width>91</width>
+ <height>21</height>
</rect>
</property>
- <property name="title">
- <string>PIT</string>
+ <property name="readOnly">
+ <bool>false</bool>
</property>
- <widget class="QLineEdit" name="pitLineEdit">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>10</x>
- <y>50</y>
- <width>301</width>
- <height>21</height>
- </rect>
- </property>
- <property name="readOnly">
- <bool>true</bool>
- </property>
- </widget>
- <widget class="QPushButton" name="pitBrowseButton">
- <property name="enabled">
- <bool>true</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>320</x>
- <y>50</y>
- <width>71</width>
- <height>23</height>
- </rect>
- </property>
- <property name="text">
- <string>Browse</string>
- </property>
- </widget>
- <widget class="QCheckBox" name="repartitionCheckBox">
- <property name="enabled">
- <bool>false</bool>
- </property>
- <property name="geometry">
- <rect>
- <x>10</x>
- <y>20</y>
- <width>381</width>
- <height>17</height>
- </rect>
- </property>
- <property name="text">
- <string>Repartition Device</string>
- </property>
- </widget>
</widget>
</widget>
- <widget class="QPushButton" name="startFlashButton">
- <property name="enabled">
- <bool>false</bool>
- </property>
+ <widget class="QGroupBox" name="createPlatformNameGroup">
<property name="geometry">
<rect>
- <x>780</x>
- <y>410</y>
- <width>91</width>
- <height>31</height>
+ <x>490</x>
+ <y>10</y>
+ <width>151</width>
+ <height>61</height>
</rect>
</property>
- <property name="text">
- <string>Start</string>
+ <property name="title">
+ <string>Platform Name</string>
</property>
+ <widget class="QLineEdit" name="createPlatformNameLineEdit">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>131</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>false</bool>
+ </property>
+ </widget>
</widget>
- <widget class="QProgressBar" name="flashProgressBar">
- <property name="enabled">
- <bool>false</bool>
- </property>
+ <widget class="QGroupBox" name="createFirmwareNameGroup">
<property name="geometry">
<rect>
- <x>460</x>
- <y>410</y>
- <width>311</width>
- <height>31</height>
+ <x>10</x>
+ <y>10</y>
+ <width>221</width>
+ <height>61</height>
</rect>
</property>
- <property name="value">
- <number>0</number>
+ <property name="title">
+ <string>Firmware Name</string>
</property>
+ <widget class="QLineEdit" name="createFirmwareNameLineEdit">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>201</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>false</bool>
+ </property>
+ </widget>
</widget>
- <widget class="QGroupBox" name="otherGroupBox">
+ <widget class="QGroupBox" name="createDevelopersGroup">
<property name="geometry">
<rect>
- <x>440</x>
- <y>160</y>
- <width>421</width>
- <height>151</height>
+ <x>10</x>
+ <y>80</y>
+ <width>751</width>
+ <height>141</height>
</rect>
</property>
- <property name="font">
- <font>
- <family>MS Shell Dlg 2</family>
- </font>
- </property>
<property name="title">
- <string>Other</string>
+ <string>Developers</string>
</property>
- <widget class="QGroupBox" name="recoveryGroupBox">
+ <widget class="QListWidget" name="createDevelopersListWidget">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
<property name="geometry">
<rect>
- <x>10</x>
- <y>80</y>
- <width>401</width>
- <height>61</height>
+ <x>550</x>
+ <y>20</y>
+ <width>191</width>
+ <height>81</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QGroupBox" name="createDeveloperInfoGroup">
+ <property name="geometry">
+ <rect>
+ <x>300</x>
+ <y>20</y>
+ <width>241</width>
+ <height>101</height>
</rect>
</property>
<property name="title">
- <string>Recovery</string>
+ <string>Developer Info</string>
</property>
- <widget class="QLineEdit" name="recoveryLineEdit">
- <property name="enabled">
- <bool>false</bool>
- </property>
+ <widget class="QLabel" name="createDeveloperNameLabel">
<property name="geometry">
<rect>
- <x>30</x>
+ <x>10</x>
<y>30</y>
- <width>281</width>
- <height>21</height>
+ <width>41</width>
+ <height>16</height>
</rect>
</property>
- <property name="readOnly">
- <bool>true</bool>
+ <property name="text">
+ <string>Name</string>
</property>
</widget>
- <widget class="QPushButton" name="recoveryBrowseButton">
+ <widget class="QLineEdit" name="createDeveloperNameLineEdit">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
<property name="geometry">
<rect>
- <x>320</x>
+ <x>60</x>
<y>30</y>
- <width>71</width>
- <height>23</height>
+ <width>171</width>
+ <height>21</height>
</rect>
</property>
- <property name="text">
- <string>Browse</string>
+ <property name="readOnly">
+ <bool>false</bool>
</property>
</widget>
- <widget class="QCheckBox" name="recoveryCheckBox">
+ <widget class="QPushButton" name="addDeveloperButton">
<property name="enabled">
<bool>false</bool>
</property>
<property name="geometry">
<rect>
- <x>10</x>
- <y>30</y>
- <width>21</width>
- <height>21</height>
+ <x>140</x>
+ <y>60</y>
+ <width>91</width>
+ <height>23</height>
</rect>
</property>
<property name="text">
- <string/>
+ <string>Add Developer</string>
</property>
</widget>
</widget>
- <widget class="QGroupBox" name="modemGroupBox">
+ <widget class="QPushButton" name="removeDeveloperButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>630</x>
+ <y>110</y>
+ <width>111</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Remove Developer</string>
+ </property>
+ </widget>
+ <widget class="QGroupBox" name="createUrlsGroup">
<property name="geometry">
<rect>
<x>10</x>
<y>20</y>
- <width>401</width>
- <height>61</height>
+ <width>281</width>
+ <height>101</height>
</rect>
</property>
<property name="title">
- <string>Modem</string>
+ <string>URLs (Optional)</string>
</property>
- <widget class="QLineEdit" name="modemLineEdit">
- <property name="enabled">
- <bool>false</bool>
- </property>
+ <widget class="QLabel" name="createDonateLabel">
<property name="geometry">
<rect>
- <x>30</x>
- <y>30</y>
- <width>281</width>
- <height>21</height>
+ <x>10</x>
+ <y>60</y>
+ <width>71</width>
+ <height>16</height>
</rect>
</property>
- <property name="readOnly">
- <bool>true</bool>
+ <property name="text">
+ <string>Donate</string>
</property>
</widget>
- <widget class="QPushButton" name="modemBrowseButton">
+ <widget class="QLabel" name="createHomepageLabel">
<property name="geometry">
<rect>
- <x>320</x>
+ <x>10</x>
<y>30</y>
<width>71</width>
- <height>23</height>
+ <height>16</height>
</rect>
</property>
<property name="text">
- <string>Browse</string>
+ <string>Homepage</string>
</property>
</widget>
- <widget class="QCheckBox" name="modemCheckBox">
+ <widget class="QLineEdit" name="createHomepageLineEdit">
<property name="enabled">
- <bool>false</bool>
+ <bool>true</bool>
</property>
<property name="geometry">
<rect>
- <x>10</x>
+ <x>90</x>
<y>30</y>
- <width>21</width>
+ <width>181</width>
<height>21</height>
</rect>
</property>
- <property name="text">
- <string/>
+ <property name="readOnly">
+ <bool>false</bool>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="createDonateLineEdit">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>90</x>
+ <y>60</y>
+ <width>181</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>false</bool>
</property>
</widget>
</widget>
</widget>
- <widget class="QLabel" name="flashLabel">
+ <widget class="QGroupBox" name="createPlatformVersionGroup">
<property name="geometry">
<rect>
- <x>460</x>
- <y>380</y>
- <width>411</width>
- <height>21</height>
+ <x>650</x>
+ <y>10</y>
+ <width>111</width>
+ <height>61</height>
</rect>
</property>
- <property name="text">
- <string notr="true">Ready</string>
- </property>
- <property name="textFormat">
- <enum>Qt::PlainText</enum>
- </property>
- <property name="alignment">
- <set>Qt::AlignBottom|Qt::AlignLeading|Qt::AlignLeft</set>
+ <property name="title">
+ <string>Platform Version</string>
</property>
+ <widget class="QLineEdit" name="createPlatformVersionLineEdit">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>91</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>false</bool>
+ </property>
+ </widget>
</widget>
- </widget>
- <widget class="QWidget" name="firmwareTab">
- <attribute name="title">
- <string>Download Firmware</string>
- </attribute>
- <widget class="QGroupBox" name="groupBox_2">
+ <widget class="QGroupBox" name="createDeviceInfoGroup">
<property name="geometry">
<rect>
- <x>10</x>
- <y>10</y>
- <width>851</width>
- <height>441</height>
+ <x>500</x>
+ <y>250</y>
+ <width>271</width>
+ <height>151</height>
</rect>
</property>
<property name="title">
- <string/>
+ <string>Device Info</string>
</property>
- <widget class="QLabel" name="label">
+ <widget class="QLabel" name="deviceNameLabel">
<property name="geometry">
<rect>
<x>10</x>
- <y>10</y>
- <width>831</width>
- <height>391</height>
+ <y>50</y>
+ <width>91</width>
+ <height>16</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Name</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="deviceNameLineEdit">
+ <property name="enabled">
+ <bool>true</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>50</y>
+ <width>151</width>
+ <height>21</height>
</rect>
</property>
- <property name="frameShape">
- <enum>QFrame::NoFrame</enum>
+ <property name="readOnly">
+ <bool>false</bool>
</property>
- <property name="frameShadow">
- <enum>QFrame::Plain</enum>
+ </widget>
+ <widget class="QLabel" name="deviceManufacturerLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>20</y>
+ <width>91</width>
+ <height>16</height>
+ </rect>
</property>
<property name="text">
- <string>This functionality is still under development and will be included in a future release.</string>
+ <string>Manufacturer</string>
</property>
- <property name="textFormat">
- <enum>Qt::PlainText</enum>
+ </widget>
+ <widget class="QLineEdit" name="deviceManufacturerLineEdit">
+ <property name="enabled">
+ <bool>true</bool>
</property>
- <property name="alignment">
- <set>Qt::AlignLeading|Qt::AlignLeft|Qt::AlignTop</set>
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>20</y>
+ <width>151</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>false</bool>
</property>
- <property name="wordWrap">
+ </widget>
+ <widget class="QLabel" name="productCodeLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>80</y>
+ <width>91</width>
+ <height>16</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Product Code</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="deviceProductCodeLineEdit">
+ <property name="enabled">
<bool>true</bool>
</property>
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>80</y>
+ <width>151</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="readOnly">
+ <bool>false</bool>
+ </property>
</widget>
+ <widget class="QPushButton" name="addDeviceButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>160</x>
+ <y>110</y>
+ <width>101</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Add Device</string>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QPushButton" name="buildPackageButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="geometry">
+ <rect>
+ <x>580</x>
+ <y>410</y>
+ <width>121</width>
+ <height>31</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Build</string>
+ </property>
</widget>
</widget>
</widget>
@@ -831,7 +1166,7 @@
<rect>
<x>0</x>
<y>0</y>
- <width>902</width>
+ <width>788</width>
<height>21</height>
</rect>
</property>
@@ -865,8 +1200,57 @@
<string>Donate to Glass Echidna</string>
</property>
</action>
+ <action name="actionPackage_Creation">
+ <property name="text">
+ <string>Package Creation</string>
+ </property>
+ </action>
</widget>
<layoutdefault spacing="6" margin="11"/>
+ <tabstops>
+ <tabstop>functionTabWidget</tabstop>
+ <tabstop>firmwarePackageLineEdit</tabstop>
+ <tabstop>browseFirmwarePackageButton</tabstop>
+ <tabstop>firmwareNameLineEdit</tabstop>
+ <tabstop>versionLineEdit</tabstop>
+ <tabstop>platformLineEdit</tabstop>
+ <tabstop>developerNamesLineEdit</tabstop>
+ <tabstop>developerHomepageButton</tabstop>
+ <tabstop>developerDonateButton</tabstop>
+ <tabstop>supportedDevicesListWidget</tabstop>
+ <tabstop>includedFilesListWidget</tabstop>
+ <tabstop>repartitionRadioButton</tabstop>
+ <tabstop>loadFirmwareButton</tabstop>
+ <tabstop>repartitionCheckBox</tabstop>
+ <tabstop>pitLineEdit</tabstop>
+ <tabstop>pitBrowseButton</tabstop>
+ <tabstop>partitionNameComboBox</tabstop>
+ <tabstop>partitionIdLineEdit</tabstop>
+ <tabstop>partitionFileLineEdit</tabstop>
+ <tabstop>partitionFileBrowseButton</tabstop>
+ <tabstop>partitionsListWidget</tabstop>
+ <tabstop>addPartitionButton</tabstop>
+ <tabstop>removePartitionButton</tabstop>
+ <tabstop>outputPlainTextEdit</tabstop>
+ <tabstop>startFlashButton</tabstop>
+ <tabstop>createFirmwareNameLineEdit</tabstop>
+ <tabstop>createFirmwareVersionLineEdit</tabstop>
+ <tabstop>createPlatformNameLineEdit</tabstop>
+ <tabstop>createPlatformVersionLineEdit</tabstop>
+ <tabstop>createHomepageLineEdit</tabstop>
+ <tabstop>createDonateLineEdit</tabstop>
+ <tabstop>createDeveloperNameLineEdit</tabstop>
+ <tabstop>addDeveloperButton</tabstop>
+ <tabstop>createDevelopersListWidget</tabstop>
+ <tabstop>removeDeveloperButton</tabstop>
+ <tabstop>createDevicesListWidget</tabstop>
+ <tabstop>removeDeviceButton</tabstop>
+ <tabstop>deviceManufacturerLineEdit</tabstop>
+ <tabstop>deviceNameLineEdit</tabstop>
+ <tabstop>deviceProductCodeLineEdit</tabstop>
+ <tabstop>addDeviceButton</tabstop>
+ <tabstop>buildPackageButton</tabstop>
+ </tabstops>
<resources/>
<connections/>
</ui>
diff --git a/heimdall/heimdall.vcxproj b/heimdall/heimdall.vcxproj
index ee40753..a0dcc9f 100644
--- a/heimdall/heimdall.vcxproj
+++ b/heimdall/heimdall.vcxproj
@@ -52,19 +52,19 @@
<PropertyGroup Label="UserMacros" />
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
<LinkIncremental>true</LinkIncremental>
- <IncludePath>$(IncludePath)</IncludePath>
+ <IncludePath>$(SolutionDir)libpit\Source;$(SolutionDir)libusb-1.0\libusb;$(IncludePath)</IncludePath>
<LibraryPath>$(LibraryPath)</LibraryPath>
<OutDir>$(SolutionDir)$(Platform)\$(Configuration)\</OutDir>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
<LinkIncremental>false</LinkIncremental>
- <IncludePath>$(IncludePath)</IncludePath>
+ <IncludePath>$(SolutionDir)libpit\Source;$(SolutionDir)libusb-1.0\libusb;$(IncludePath)</IncludePath>
<LibraryPath>$(LibraryPath)</LibraryPath>
<OutDir>$(SolutionDir)$(Platform)\$(Configuration)\</OutDir>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">
<LinkIncremental>false</LinkIncremental>
- <IncludePath>$(IncludePath)</IncludePath>
+ <IncludePath>$(SolutionDir)libpit\Source;$(SolutionDir)libusb-1.0\libusb;$(IncludePath)</IncludePath>
<LibraryPath>$(LibraryPath)</LibraryPath>
<OutDir>$(SolutionDir)$(Platform)\$(Configuration)\</OutDir>
</PropertyGroup>
@@ -79,12 +79,12 @@
</PrecompiledHeaderFile>
<PrecompiledHeaderOutputFile>
</PrecompiledHeaderOutputFile>
- <AdditionalIncludeDirectories>..\libusb-1.0\libusb</AdditionalIncludeDirectories>
+ <AdditionalIncludeDirectories>..\libusb-1.0\libusb;..\libpit\Source</AdditionalIncludeDirectories>
</ClCompile>
<Link>
<SubSystem>Console</SubSystem>
<GenerateDebugInformation>true</GenerateDebugInformation>
- <AdditionalDependencies>libusb-1.0.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <AdditionalDependencies>libusb-1.0.lib;libpit.lib;%(AdditionalDependencies)</AdditionalDependencies>
<AdditionalLibraryDirectories>$(SolutionDir)$(Platform)\$(Configuration)\lib\</AdditionalLibraryDirectories>
</Link>
</ItemDefinitionGroup>
@@ -101,14 +101,14 @@
</PrecompiledHeaderFile>
<PrecompiledHeaderOutputFile>
</PrecompiledHeaderOutputFile>
- <AdditionalIncludeDirectories>..\libusb-1.0\libusb</AdditionalIncludeDirectories>
+ <AdditionalIncludeDirectories>..\libusb-1.0\libusb;..\libpit\Source</AdditionalIncludeDirectories>
</ClCompile>
<Link>
<SubSystem>Console</SubSystem>
<GenerateDebugInformation>true</GenerateDebugInformation>
<EnableCOMDATFolding>true</EnableCOMDATFolding>
<OptimizeReferences>true</OptimizeReferences>
- <AdditionalDependencies>libusb-1.0.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <AdditionalDependencies>libusb-1.0.lib;libpit.lib;%(AdditionalDependencies)</AdditionalDependencies>
<AdditionalLibraryDirectories>$(SolutionDir)$(Platform)\$(Configuration)\lib\</AdditionalLibraryDirectories>
</Link>
</ItemDefinitionGroup>
@@ -125,14 +125,14 @@
</PrecompiledHeaderFile>
<PrecompiledHeaderOutputFile>
</PrecompiledHeaderOutputFile>
- <AdditionalIncludeDirectories>..\libusb-1.0\libusb</AdditionalIncludeDirectories>
+ <AdditionalIncludeDirectories>..\libusb-1.0\libusb;..\libpit\Source</AdditionalIncludeDirectories>
</ClCompile>
<Link>
<SubSystem>Console</SubSystem>
<GenerateDebugInformation>true</GenerateDebugInformation>
<EnableCOMDATFolding>true</EnableCOMDATFolding>
<OptimizeReferences>true</OptimizeReferences>
- <AdditionalDependencies>libusb-1.0.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <AdditionalDependencies>libusb-1.0.lib;libpit.lib;%(AdditionalDependencies)</AdditionalDependencies>
<AdditionalLibraryDirectories>$(SolutionDir)$(Platform)\$(Configuration)\lib\</AdditionalLibraryDirectories>
</Link>
</ItemDefinitionGroup>
@@ -153,10 +153,9 @@
<ClInclude Include="source\FlashPartPitFilePacket.h" />
<ClInclude Include="source\Heimdall.h" />
<ClInclude Include="source\InboundPacket.h" />
- <ClInclude Include="source\InterfaceManager.h" />
+ <ClInclude Include="source\Interface.h" />
<ClInclude Include="source\OutboundPacket.h" />
<ClInclude Include="source\Packet.h" />
- <ClInclude Include="source\PitData.h" />
<ClInclude Include="source\PitFilePacket.h" />
<ClInclude Include="source\PitFileResponse.h" />
<ClInclude Include="source\EndSessionPacket.h" />
@@ -167,9 +166,8 @@
</ItemGroup>
<ItemGroup>
<ClCompile Include="source\BridgeManager.cpp" />
- <ClCompile Include="source\InterfaceManager.cpp" />
+ <ClCompile Include="source\Interface.cpp" />
<ClCompile Include="source\main.cpp" />
- <ClCompile Include="source\PitData.cpp" />
</ItemGroup>
<Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
<ImportGroup Label="ExtensionTargets">
diff --git a/heimdall/heimdall.vcxproj.filters b/heimdall/heimdall.vcxproj.filters
index 737c921..e89df24 100644
--- a/heimdall/heimdall.vcxproj.filters
+++ b/heimdall/heimdall.vcxproj.filters
@@ -79,13 +79,10 @@
<ClInclude Include="source\SendFilePartResponse.h">
<Filter>Source</Filter>
</ClInclude>
- <ClInclude Include="source\InterfaceManager.h">
- <Filter>Source</Filter>
- </ClInclude>
- <ClInclude Include="source\PitData.h">
+ <ClInclude Include="source\EndSessionPacket.h">
<Filter>Source</Filter>
</ClInclude>
- <ClInclude Include="source\EndSessionPacket.h">
+ <ClInclude Include="source\Interface.h">
<Filter>Source</Filter>
</ClInclude>
</ItemGroup>
@@ -96,10 +93,7 @@
<ClCompile Include="source\main.cpp">
<Filter>Source</Filter>
</ClCompile>
- <ClCompile Include="source\InterfaceManager.cpp">
- <Filter>Source</Filter>
- </ClCompile>
- <ClCompile Include="source\PitData.cpp">
+ <ClCompile Include="source\Interface.cpp">
<Filter>Source</Filter>
</ClCompile>
</ItemGroup>
diff --git a/heimdall/source/BridgeManager.cpp b/heimdall/source/BridgeManager.cpp
index caa3978..204d87f 100644
--- a/heimdall/source/BridgeManager.cpp
+++ b/heimdall/source/BridgeManager.cpp
@@ -27,6 +27,8 @@
// Heimdall
#include "BeginDumpPacket.h"
#include "BridgeManager.h"
+#include "DeviceInfoPacket.h"
+#include "DeviceInfoResponse.h"
#include "DumpPartFileTransferPacket.h"
#include "DumpPartPitFilePacket.h"
#include "DumpResponse.h"
@@ -37,7 +39,7 @@
#include "FlashPartFileTransferPacket.h"
#include "FlashPartPitFilePacket.h"
#include "InboundPacket.h"
-#include "InterfaceManager.h"
+#include "Interface.h"
#include "OutboundPacket.h"
#include "PitFilePacket.h"
#include "PitFileResponse.h"
@@ -92,7 +94,7 @@ BridgeManager::~BridgeManager()
if (detachedDriver)
{
- InterfaceManager::Print("Re-attaching kernel driver...\n");
+ Interface::Print("Re-attaching kernel driver...\n");
libusb_attach_kernel_driver(deviceHandle, interfaceIndex);
}
@@ -108,13 +110,50 @@ BridgeManager::~BridgeManager()
libusb_exit(libusbContext);
}
+bool BridgeManager::DetectDevice(void)
+{
+ // Initialise libusb-1.0
+ int result = libusb_init(&libusbContext);
+ if (result != LIBUSB_SUCCESS)
+ {
+ Interface::PrintError("Failed to initialise libusb. Error: %i\n", result);
+ return (false);
+ }
+
+ // Get handle to Galaxy S device
+ struct libusb_device **devices;
+ int deviceCount = libusb_get_device_list(libusbContext, &devices);
+
+ for (int deviceIndex = 0; deviceIndex < deviceCount; deviceIndex++)
+ {
+ libusb_device_descriptor descriptor;
+ libusb_get_device_descriptor(devices[deviceIndex], &descriptor);
+
+ for (int i = 0; i < BridgeManager::kSupportedDeviceCount; i++)
+ {
+ if (descriptor.idVendor == supportedDevices[i].vendorId && descriptor.idProduct == supportedDevices[i].productId)
+ {
+ libusb_free_device_list(devices, deviceCount);
+
+ Interface::Print("Device detected");
+ return (true);
+ }
+ }
+ }
+
+ libusb_free_device_list(devices, deviceCount);
+
+ Interface::Print("Failed to detect compatible device\n");
+ return (false);
+}
+
bool BridgeManager::Initialise(void)
{
// Initialise libusb-1.0
int result = libusb_init(&libusbContext);
if (result != LIBUSB_SUCCESS)
{
- InterfaceManager::PrintError("Failed to initialise libusb. Error: %i\n", result);
+ Interface::PrintError("Failed to initialise libusb. Error: %i\n", result);
return (false);
}
@@ -145,14 +184,14 @@ bool BridgeManager::Initialise(void)
if (!heimdallDevice)
{
- InterfaceManager::PrintError("Failed to detect compatible device\n");
+ Interface::PrintError("Failed to detect compatible device\n");
return (false);
}
result = libusb_open(heimdallDevice, &deviceHandle);
if (result != LIBUSB_SUCCESS)
{
- InterfaceManager::PrintError("Failed to access device. Error: %i\n", result);
+ Interface::PrintError("Failed to access device. Error: %i\n", result);
return (false);
}
@@ -160,7 +199,7 @@ bool BridgeManager::Initialise(void)
result = libusb_get_device_descriptor(heimdallDevice, &deviceDescriptor);
if (result != LIBUSB_SUCCESS)
{
- InterfaceManager::PrintError("Failed to retrieve device description\n");
+ Interface::PrintError("Failed to retrieve device description\n");
return (false);
}
@@ -170,36 +209,36 @@ bool BridgeManager::Initialise(void)
if (libusb_get_string_descriptor_ascii(deviceHandle, deviceDescriptor.iManufacturer,
stringBuffer, 128) >= 0)
{
- InterfaceManager::Print(" Manufacturer: \"%s\"\n", stringBuffer);
+ Interface::Print(" Manufacturer: \"%s\"\n", stringBuffer);
}
if (libusb_get_string_descriptor_ascii(deviceHandle, deviceDescriptor.iProduct,
stringBuffer, 128) >= 0)
{
- InterfaceManager::Print(" Product: \"%s\"\n", stringBuffer);
+ Interface::Print(" Product: \"%s\"\n", stringBuffer);
}
if (libusb_get_string_descriptor_ascii(deviceHandle, deviceDescriptor.iSerialNumber,
stringBuffer, 128) >= 0)
{
- InterfaceManager::Print(" Serial No: \"%s\"\n", stringBuffer);
+ Interface::Print(" Serial No: \"%s\"\n", stringBuffer);
}
- InterfaceManager::Print("\n length: %d\n", deviceDescriptor.bLength);
- InterfaceManager::Print(" device class: %d\n", deviceDescriptor.bDeviceClass);
- InterfaceManager::Print(" S/N: %d\n", deviceDescriptor.iSerialNumber);
- InterfaceManager::Print(" VID:PID: %04X:%04X\n", deviceDescriptor.idVendor, deviceDescriptor.idProduct);
- InterfaceManager::Print(" bcdDevice: %04X\n", deviceDescriptor.bcdDevice);
- InterfaceManager::Print(" iMan:iProd:iSer: %d:%d:%d\n", deviceDescriptor.iManufacturer, deviceDescriptor.iProduct,
+ Interface::Print("\n length: %d\n", deviceDescriptor.bLength);
+ Interface::Print(" device class: %d\n", deviceDescriptor.bDeviceClass);
+ Interface::Print(" S/N: %d\n", deviceDescriptor.iSerialNumber);
+ Interface::Print(" VID:PID: %04X:%04X\n", deviceDescriptor.idVendor, deviceDescriptor.idProduct);
+ Interface::Print(" bcdDevice: %04X\n", deviceDescriptor.bcdDevice);
+ Interface::Print(" iMan:iProd:iSer: %d:%d:%d\n", deviceDescriptor.iManufacturer, deviceDescriptor.iProduct,
deviceDescriptor.iSerialNumber);
- InterfaceManager::Print(" nb confs: %d\n", deviceDescriptor.bNumConfigurations);
+ Interface::Print(" nb confs: %d\n", deviceDescriptor.bNumConfigurations);
}
libusb_config_descriptor *configDescriptor;
result = libusb_get_config_descriptor(heimdallDevice, 0, &configDescriptor);
if (result != LIBUSB_SUCCESS || !configDescriptor)
{
- InterfaceManager::PrintError("Failed to retrieve config descriptor\n");
+ Interface::PrintError("Failed to retrieve config descriptor\n");
return (false);
}
@@ -212,9 +251,9 @@ bool BridgeManager::Initialise(void)
{
if (verbose)
{
- InterfaceManager::Print("\ninterface[%d].altsetting[%d]: num endpoints = %d\n",
+ Interface::Print("\ninterface[%d].altsetting[%d]: num endpoints = %d\n",
i, j, configDescriptor->usb_interface[i].altsetting[j].bNumEndpoints);
- InterfaceManager::Print(" Class.SubClass.Protocol: %02X.%02X.%02X\n",
+ Interface::Print(" Class.SubClass.Protocol: %02X.%02X.%02X\n",
configDescriptor->usb_interface[i].altsetting[j].bInterfaceClass,
configDescriptor->usb_interface[i].altsetting[j].bInterfaceSubClass,
configDescriptor->usb_interface[i].altsetting[j].bInterfaceProtocol);
@@ -230,9 +269,9 @@ bool BridgeManager::Initialise(void)
if (verbose)
{
- InterfaceManager::Print(" endpoint[%d].address: %02X\n", k, endpoint->bEndpointAddress);
- InterfaceManager::Print(" max packet size: %04X\n", endpoint->wMaxPacketSize);
- InterfaceManager::Print(" polling interval: %02X\n", endpoint->bInterval);
+ Interface::Print(" endpoint[%d].address: %02X\n", k, endpoint->bEndpointAddress);
+ Interface::Print(" max packet size: %04X\n", endpoint->wMaxPacketSize);
+ Interface::Print(" polling interval: %02X\n", endpoint->bInterval);
}
if (endpoint->bEndpointAddress & LIBUSB_ENDPOINT_IN)
@@ -258,11 +297,11 @@ bool BridgeManager::Initialise(void)
if (result != LIBUSB_SUCCESS)
{
- InterfaceManager::PrintError("Failed to find correct interface configuration\n");
+ Interface::PrintError("Failed to find correct interface configuration\n");
return (false);
}
- InterfaceManager::Print("\nClaiming interface...");
+ Interface::Print("\nClaiming interface...");
result = libusb_claim_interface(deviceHandle, interfaceIndex);
#ifdef OS_LINUX
@@ -270,9 +309,9 @@ bool BridgeManager::Initialise(void)
if (result != LIBUSB_SUCCESS)
{
detachedDriver = true;
- InterfaceManager::Print(" Failed. Attempting to detach driver...\n");
+ Interface::Print(" Failed. Attempting to detach driver...\n");
libusb_detach_kernel_driver(deviceHandle, interfaceIndex);
- InterfaceManager::Print("Claiming interface again...");
+ Interface::Print("Claiming interface again...");
result = libusb_claim_interface(deviceHandle, interfaceIndex);
}
@@ -280,28 +319,28 @@ bool BridgeManager::Initialise(void)
if (result != LIBUSB_SUCCESS)
{
- InterfaceManager::PrintError(" Failed!\n");
+ Interface::PrintError(" Failed!\n");
return (false);
}
- InterfaceManager::Print(" Success\n");
+ Interface::Print(" Success\n");
- InterfaceManager::Print("Setting up interface...");
+ Interface::Print("Setting up interface...");
result = libusb_set_interface_alt_setting(deviceHandle, interfaceIndex, altSettingIndex);
if (result != LIBUSB_SUCCESS)
{
- InterfaceManager::PrintError(" Failed!\n");
+ Interface::PrintError(" Failed!\n");
return (false);
}
- InterfaceManager::Print(" Success\n");
+ Interface::Print(" Success\n");
return (true);
}
bool BridgeManager::BeginSession(void) const
{
- InterfaceManager::Print("Beginning session...\n");
+ Interface::Print("Beginning session...\n");
unsigned char *dataBuffer = new unsigned char[7];
@@ -309,7 +348,7 @@ bool BridgeManager::BeginSession(void) const
if (result < 0)
{
- InterfaceManager::PrintError("Failed to initialise usb communication!\n");
+ Interface::PrintError("Failed to initialise usb communication!\n");
delete [] dataBuffer;
return (false);
}
@@ -322,7 +361,7 @@ bool BridgeManager::BeginSession(void) const
result = libusb_control_transfer(deviceHandle, LIBUSB_REQUEST_TYPE_CLASS, 0x20, 0x0, 0, dataBuffer, 7, 1000);
if (result < 0)
{
- InterfaceManager::PrintError("Failed to initialise usb communication!\n");
+ Interface::PrintError("Failed to initialise usb communication!\n");
delete [] dataBuffer;
return (false);
}
@@ -330,7 +369,7 @@ bool BridgeManager::BeginSession(void) const
result = libusb_control_transfer(deviceHandle, LIBUSB_REQUEST_TYPE_CLASS, 0x22, 0x3, 0, nullptr, 0, 1000);
if (result < 0)
{
- InterfaceManager::PrintError("Failed to initialise usb communication!\n");
+ Interface::PrintError("Failed to initialise usb communication!\n");
delete [] dataBuffer;
return (false);
}
@@ -338,7 +377,7 @@ bool BridgeManager::BeginSession(void) const
result = libusb_control_transfer(deviceHandle, LIBUSB_REQUEST_TYPE_CLASS, 0x22, 0x2, 0, nullptr, 0, 1000);
if (result < 0)
{
- InterfaceManager::PrintError("Failed to initialise usb communication!\n");
+ Interface::PrintError("Failed to initialise usb communication!\n");
delete [] dataBuffer;
return (false);
}
@@ -351,7 +390,7 @@ bool BridgeManager::BeginSession(void) const
result = libusb_control_transfer(deviceHandle, LIBUSB_REQUEST_TYPE_CLASS, 0x20, 0x0, 0, dataBuffer, 7, 1000);
if (result < 0)
{
- InterfaceManager::PrintError("Failed to initialise usb communication!\n");
+ Interface::PrintError("Failed to initialise usb communication!\n");
delete [] dataBuffer;
return (false);
}
@@ -359,12 +398,12 @@ bool BridgeManager::BeginSession(void) const
result = libusb_control_transfer(deviceHandle, LIBUSB_REQUEST_TYPE_CLASS, 0x22, 0x2, 0, nullptr, 0, 1000);
if (result < 0)
{
- InterfaceManager::PrintError("Failed to initialise usb communication!\n");
+ Interface::PrintError("Failed to initialise usb communication!\n");
delete [] dataBuffer;
return (false);
}
- InterfaceManager::Print("Handshaking with Loke...");
+ Interface::Print("Handshaking with Loke...");
int dataTransferred;
@@ -374,10 +413,10 @@ bool BridgeManager::BeginSession(void) const
result = libusb_bulk_transfer(deviceHandle, outEndpoint, dataBuffer, 4, &dataTransferred, 1000);
if (result < 0)
{
- InterfaceManager::PrintError(" Failed!\n");
+ Interface::PrintError(" Failed!\n");
if (verbose)
- InterfaceManager::PrintError("ERROR: Failed to send data: \"%s\"\n", dataBuffer);
+ Interface::PrintError("ERROR: Failed to send data: \"%s\"\n", dataBuffer);
delete [] dataBuffer;
return (false);
@@ -385,10 +424,10 @@ bool BridgeManager::BeginSession(void) const
if (dataTransferred != 4)
{
- InterfaceManager::PrintError(" Failed!\n");
+ Interface::PrintError(" Failed!\n");
if (verbose)
- InterfaceManager::PrintError("ERROR: Failed to complete sending data: \"%s\"\n", dataBuffer);
+ Interface::PrintError("ERROR: Failed to complete sending data: \"%s\"\n", dataBuffer);
delete [] dataBuffer;
return (false);
@@ -400,32 +439,32 @@ bool BridgeManager::BeginSession(void) const
result = libusb_bulk_transfer(deviceHandle, inEndpoint, dataBuffer, 7, &dataTransferred, 1000);
if (result < 0)
{
- InterfaceManager::PrintError(" Failed!\n");
+ Interface::PrintError(" Failed!\n");
if (verbose)
- InterfaceManager::PrintError("ERROR: Failed to receive response\n");
+ Interface::PrintError("ERROR: Failed to receive response\n");
delete [] dataBuffer;
return (false);;
}
if (dataTransferred != 4 || memcmp(dataBuffer, "LOKE", 4) != 0)
{
- InterfaceManager::PrintError(" Failed!\n");
+ Interface::PrintError(" Failed!\n");
if (verbose)
- InterfaceManager::PrintError("ERROR: Unexpected communication.\nExpected: \"%s\"\nReceived: \"%s\"\n", "LOKE", dataBuffer);
+ Interface::PrintError("ERROR: Unexpected communication.\nExpected: \"%s\"\nReceived: \"%s\"\n", "LOKE", dataBuffer);
delete [] dataBuffer;
return (false);
}
- InterfaceManager::Print(" Success\n\n");
+ Interface::Print(" Success\n\n");
return (true);
}
-bool BridgeManager::EndSession(void) const
+bool BridgeManager::EndSession(bool reboot) const
{
- InterfaceManager::Print("Ending session...\n");
+ Interface::Print("Ending session...\n");
EndSessionPacket *endSessionPacket = new EndSessionPacket(EndSessionPacket::kRequestEndSession);
bool success = SendPacket(endSessionPacket);
@@ -433,7 +472,7 @@ bool BridgeManager::EndSession(void) const
if (!success)
{
- InterfaceManager::PrintError("Failed to send end session packet!\n");
+ Interface::PrintError("Failed to send end session packet!\n");
return (false);
}
@@ -443,10 +482,35 @@ bool BridgeManager::EndSession(void) const
if (!success)
{
- InterfaceManager::PrintError("Failed to receive session end confirmation!\n");
+ Interface::PrintError("Failed to receive session end confirmation!\n");
return (false);
}
+ if (reboot)
+ {
+ Interface::Print("Rebooting device...\n");
+
+ EndSessionPacket *rebootDevicePacket = new EndSessionPacket(EndSessionPacket::kRequestRebootDevice);
+ bool success = SendPacket(rebootDevicePacket);
+ delete rebootDevicePacket;
+
+ if (!success)
+ {
+ Interface::PrintError("Failed to send reboot device packet!\n");
+ return (false);
+ }
+
+ ResponsePacket *rebootDeviceResponse = new ResponsePacket(ResponsePacket::kResponseTypeEndSession);
+ success = ReceivePacket(rebootDeviceResponse);
+ delete rebootDeviceResponse;
+
+ if (!success)
+ {
+ Interface::PrintError("Failed to receive reboot confirmation!\n");
+ return (false);
+ }
+ }
+
return (true);
}
@@ -464,13 +528,13 @@ bool BridgeManager::SendPacket(OutboundPacket *packet, int timeout) const
int retryDelay = (communicationDelay > 250) ? communicationDelay : 250;
if (verbose)
- InterfaceManager::PrintError("Error %i whilst sending packet. ", result);
+ Interface::PrintError("Error %i whilst sending packet. ", result);
// Retry
for (int i = 0; i < 5; i++)
{
if (verbose)
- InterfaceManager::PrintError(" Retrying...\n");
+ Interface::PrintError(" Retrying...\n");
// Wait longer each retry
Sleep(retryDelay * (i + 1));
@@ -482,11 +546,11 @@ bool BridgeManager::SendPacket(OutboundPacket *packet, int timeout) const
break;
if (verbose)
- InterfaceManager::PrintError("Error %i whilst sending packet. ", result);
+ Interface::PrintError("Error %i whilst sending packet. ", result);
}
if (verbose)
- InterfaceManager::PrintError("\n");
+ Interface::PrintError("\n");
}
if (communicationDelay != 0)
@@ -510,13 +574,13 @@ bool BridgeManager::ReceivePacket(InboundPacket *packet, int timeout) const
int retryDelay = (communicationDelay > 250) ? communicationDelay : 250;
if (verbose)
- InterfaceManager::PrintError("Error %i whilst receiving packet. ", result);
+ Interface::PrintError("Error %i whilst receiving packet. ", result);
// Retry
for (int i = 0; i < 5; i++)
{
if (verbose)
- InterfaceManager::PrintError(" Retrying\n");
+ Interface::PrintError(" Retrying\n");
// Wait longer each retry
Sleep(retryDelay * (i + 1));
@@ -528,7 +592,7 @@ bool BridgeManager::ReceivePacket(InboundPacket *packet, int timeout) const
break;
if (verbose)
- InterfaceManager::PrintError("Error %i whilst receiving packet. ", result);
+ Interface::PrintError("Error %i whilst receiving packet. ", result);
if (i >= 3)
{
@@ -538,7 +602,7 @@ bool BridgeManager::ReceivePacket(InboundPacket *packet, int timeout) const
}
if (verbose)
- InterfaceManager::PrintError("\n");
+ Interface::PrintError("\n");
}
if (communicationDelay != 0)
@@ -552,6 +616,24 @@ bool BridgeManager::ReceivePacket(InboundPacket *packet, int timeout) const
return (packet->Unpack());
}
+bool BridgeManager::RequestDeviceInfo(unsigned int request, int *result) const
+{
+ DeviceInfoPacket deviceInfoPacket(request);
+ bool success = SendPacket(&deviceInfoPacket);
+
+ if (!success)
+ {
+ Interface::PrintError("Failed to request device info packet!\nFailed Request: %d\n");
+ return (false);
+ }
+
+ DeviceInfoResponse deviceInfoResponse;
+ success = ReceivePacket(&deviceInfoResponse);
+ *result = deviceInfoResponse.GetUnknown();
+
+ return (true);
+}
+
bool BridgeManager::SendPitFile(FILE *file) const
{
fseek(file, 0, SEEK_END);
@@ -565,7 +647,7 @@ bool BridgeManager::SendPitFile(FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to request sending of PIT file!\n");
+ Interface::PrintError("Failed to request sending of PIT file!\n");
return (false);
}
@@ -575,7 +657,7 @@ bool BridgeManager::SendPitFile(FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to confirm sending of PIT file!\n");
+ Interface::PrintError("Failed to confirm sending of PIT file!\n");
return (false);
}
@@ -586,7 +668,7 @@ bool BridgeManager::SendPitFile(FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to send PIT file part information!\n");
+ Interface::PrintError("Failed to send PIT file part information!\n");
return (false);
}
@@ -596,7 +678,7 @@ bool BridgeManager::SendPitFile(FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to confirm sending of PIT file part information!\n");
+ Interface::PrintError("Failed to confirm sending of PIT file part information!\n");
return (false);
}
@@ -607,7 +689,7 @@ bool BridgeManager::SendPitFile(FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to send file part packet!\n");
+ Interface::PrintError("Failed to send file part packet!\n");
return (false);
}
@@ -617,7 +699,7 @@ bool BridgeManager::SendPitFile(FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to receive PIT file transfer count!\n");
+ Interface::PrintError("Failed to receive PIT file transfer count!\n");
return (false);
}
@@ -637,7 +719,7 @@ int BridgeManager::ReceivePitFile(unsigned char **pitBuffer) const
if (!success)
{
- InterfaceManager::PrintError("Failed to request receival of PIT file!\n");
+ Interface::PrintError("Failed to request receival of PIT file!\n");
return (0);
}
@@ -648,7 +730,7 @@ int BridgeManager::ReceivePitFile(unsigned char **pitBuffer) const
if (!success)
{
- InterfaceManager::PrintError("Failed to receive PIT file size!\n");
+ Interface::PrintError("Failed to receive PIT file size!\n");
return (0);
}
@@ -668,7 +750,7 @@ int BridgeManager::ReceivePitFile(unsigned char **pitBuffer) const
if (!success)
{
- InterfaceManager::PrintError("Failed to request PIT file part #%i!\n", i);
+ Interface::PrintError("Failed to request PIT file part #%i!\n", i);
delete [] buffer;
return (0);
}
@@ -678,7 +760,7 @@ int BridgeManager::ReceivePitFile(unsigned char **pitBuffer) const
if (!success)
{
- InterfaceManager::PrintError("Failed to receive PIT file part #%i!\n", i);
+ Interface::PrintError("Failed to receive PIT file part #%i!\n", i);
delete receiveFilePartPacket;
delete [] buffer;
return (0);
@@ -698,7 +780,7 @@ int BridgeManager::ReceivePitFile(unsigned char **pitBuffer) const
if (!success)
{
- InterfaceManager::PrintError("Failed to send request to end PIT file transfer!\n");
+ Interface::PrintError("Failed to send request to end PIT file transfer!\n");
delete [] buffer;
return (0);
}
@@ -709,7 +791,7 @@ int BridgeManager::ReceivePitFile(unsigned char **pitBuffer) const
if (!success)
{
- InterfaceManager::PrintError("Failed to receive end PIT file transfer verification!\n");
+ Interface::PrintError("Failed to receive end PIT file transfer verification!\n");
delete [] buffer;
return (0);
}
@@ -722,13 +804,13 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
{
if (destination != EndFileTransferPacket::kDestinationModem && destination != EndFileTransferPacket::kDestinationPhone)
{
- InterfaceManager::PrintError("ERROR: Attempted to send file to unknown destination!\n");
+ Interface::PrintError("ERROR: Attempted to send file to unknown destination!\n");
return (false);
}
if (destination == EndFileTransferPacket::kDestinationModem && fileIdentifier != -1)
{
- InterfaceManager::PrintError("ERROR: The modem file does not have an identifier!\n");
+ Interface::PrintError("ERROR: The modem file does not have an identifier!\n");
return (false);
}
@@ -738,7 +820,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("Failed to initialise transfer!\n");
+ Interface::PrintError("Failed to initialise transfer!\n");
return (false);
}
@@ -752,7 +834,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("Failed to confirm transfer initialisation!\n");
+ Interface::PrintError("Failed to confirm transfer initialisation!\n");
return (false);
}
@@ -772,7 +854,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
long bytesTransferred = 0;
int currentPercent;
int previousPercent = 0;
- InterfaceManager::Print("0%%");
+ Interface::Print("0%%");
for (int sequenceIndex = 0; sequenceIndex < sequenceCount; sequenceIndex++)
{
@@ -786,7 +868,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("\nFailed to begin file transfer sequence!\n");
+ Interface::PrintError("\nFailed to begin file transfer sequence!\n");
return (false);
}
@@ -796,7 +878,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("\nFailed to confirm beginning of file transfer sequence!\n");
+ Interface::PrintError("\nFailed to confirm beginning of file transfer sequence!\n");
return (false);
}
@@ -812,7 +894,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("\nFailed to send file part packet!\n");
+ Interface::PrintError("\nFailed to send file part packet!\n");
return (false);
}
@@ -824,7 +906,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (verbose)
{
const unsigned char *data = sendFilePartResponse->GetData();
- InterfaceManager::Print("File Part #%i... Response: %X %X %X %X %X %X %X %X \n", filePartIndex,
+ Interface::Print("File Part #%i... Response: %X %X %X %X %X %X %X %X \n", filePartIndex,
data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7]);
}
@@ -832,11 +914,11 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("\nFailed to receive file part response!\n");
+ Interface::PrintError("\nFailed to receive file part response!\n");
for (int retry = 0; retry < 4; retry++)
{
- InterfaceManager::PrintError("\nRetrying...");
+ Interface::PrintError("\nRetrying...");
// Send
sendFilePartPacket = new SendFilePartPacket(file);
@@ -845,7 +927,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("\nFailed to send file part packet!\n");
+ Interface::PrintError("\nFailed to send file part packet!\n");
return (false);
}
@@ -857,7 +939,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (verbose)
{
const unsigned char *data = sendFilePartResponse->GetData();
- InterfaceManager::Print("File Part #%i... Response: %X %X %X %X %X %X %X %X \n", filePartIndex,
+ Interface::Print("File Part #%i... Response: %X %X %X %X %X %X %X %X \n", filePartIndex,
data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7]);
}
@@ -865,7 +947,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (receivedPartIndex != filePartIndex)
{
- InterfaceManager::PrintError("\nERROR: Expected file part index: %i Received: %i\n",
+ Interface::PrintError("\nERROR: Expected file part index: %i Received: %i\n",
filePartIndex, receivedPartIndex);
return (false);
}
@@ -880,7 +962,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (receivedPartIndex != filePartIndex)
{
- InterfaceManager::PrintError("\nERROR: Expected file part index: %i Received: %i\n",
+ Interface::PrintError("\nERROR: Expected file part index: %i Received: %i\n",
filePartIndex, receivedPartIndex);
return (false);
}
@@ -896,9 +978,9 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (currentPercent != previousPercent)
{
if (previousPercent < 10)
- InterfaceManager::Print("\b\b%i%%", currentPercent);
+ Interface::Print("\b\b%i%%", currentPercent);
else
- InterfaceManager::Print("\b\b\b%i%%", currentPercent);
+ Interface::Print("\b\b\b%i%%", currentPercent);
}
}
@@ -917,7 +999,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("\nFailed to end phone file transfer sequence!\n");
+ Interface::PrintError("\nFailed to end phone file transfer sequence!\n");
return (false);
}
}
@@ -931,7 +1013,7 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("\nFailed to end modem file transfer sequence!\n");
+ Interface::PrintError("\nFailed to end modem file transfer sequence!\n");
return (false);
}
}
@@ -942,13 +1024,13 @@ bool BridgeManager::SendFile(FILE *file, int destination, int fileIdentifier) co
if (!success)
{
- InterfaceManager::PrintError("\nFailed to confirm end of file transfer sequence!\n");
+ Interface::PrintError("\nFailed to confirm end of file transfer sequence!\n");
return (false);
}
}
if (!verbose)
- InterfaceManager::Print("\n");
+ Interface::Print("\n");
return (true);
}
@@ -964,7 +1046,7 @@ bool BridgeManager::ReceiveDump(int chipType, int chipId, FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to request dump!\n");
+ Interface::PrintError("Failed to request dump!\n");
return (false);
}
@@ -975,7 +1057,7 @@ bool BridgeManager::ReceiveDump(int chipType, int chipId, FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to receive dump size!\n");
+ Interface::PrintError("Failed to receive dump size!\n");
return (false);
}
@@ -994,7 +1076,7 @@ bool BridgeManager::ReceiveDump(int chipType, int chipId, FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to request dump part #%i!\n", i);
+ Interface::PrintError("Failed to request dump part #%i!\n", i);
delete [] buffer;
return (false);
}
@@ -1004,7 +1086,7 @@ bool BridgeManager::ReceiveDump(int chipType, int chipId, FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to receive dump part #%i!\n", i);
+ Interface::PrintError("Failed to receive dump part #%i!\n", i);
continue;
delete receiveFilePartPacket;
delete [] buffer;
@@ -1040,7 +1122,7 @@ bool BridgeManager::ReceiveDump(int chipType, int chipId, FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to send request to end dump transfer!\n");
+ Interface::PrintError("Failed to send request to end dump transfer!\n");
return (false);
}
@@ -1050,34 +1132,7 @@ bool BridgeManager::ReceiveDump(int chipType, int chipId, FILE *file) const
if (!success)
{
- InterfaceManager::PrintError("Failed to receive end dump transfer verification!\n");
- return (false);
- }
-
- return (true);
-}
-
-bool BridgeManager::RebootDevice(void) const
-{
- InterfaceManager::Print("Rebooting device...\n");
-
- EndSessionPacket *rebootDevicePacket = new EndSessionPacket(EndSessionPacket::kRequestRebootDevice);
- bool success = SendPacket(rebootDevicePacket);
- delete rebootDevicePacket;
-
- if (!success)
- {
- InterfaceManager::PrintError("Failed to send reboot device packet!\n");
- return (false);
- }
-
- ResponsePacket *rebootDeviceResponse = new ResponsePacket(ResponsePacket::kResponseTypeEndSession);
- success = ReceivePacket(rebootDeviceResponse);
- delete rebootDeviceResponse;
-
- if (!success)
- {
- InterfaceManager::PrintError("Failed to receive reboot confirmation!\n");
+ Interface::PrintError("Failed to receive end dump transfer verification!\n");
return (false);
}
diff --git a/heimdall/source/BridgeManager.h b/heimdall/source/BridgeManager.h
index 06e4d61..c28cd9c 100644
--- a/heimdall/source/BridgeManager.h
+++ b/heimdall/source/BridgeManager.h
@@ -97,22 +97,23 @@ namespace Heimdall
BridgeManager(bool verbose, int communicationDelay);
~BridgeManager();
+ bool DetectDevice(void);
bool Initialise(void);
bool BeginSession(void) const;
- bool EndSession(void) const;
+ bool EndSession(bool reboot) const;
bool SendPacket(OutboundPacket *packet, int timeout = 3000) const;
bool ReceivePacket(InboundPacket *packet, int timeout = 3000) const;
+ bool RequestDeviceInfo(unsigned int request, int *result) const;
+
bool SendPitFile(FILE *file) const;
int ReceivePitFile(unsigned char **pitBuffer) const;
bool SendFile(FILE *file, int destination, int fileIdentifier = -1) const;
bool ReceiveDump(int chipType, int chipId, FILE *file) const;
- bool RebootDevice(void) const;
-
bool IsVerbose(void) const
{
return (verbose);
diff --git a/heimdall/source/Interface.cpp b/heimdall/source/Interface.cpp
new file mode 100644
index 0000000..5f0942d
--- /dev/null
+++ b/heimdall/source/Interface.cpp
@@ -0,0 +1,409 @@
+/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+// C/C++ Standard Library
+#include <cstdarg>
+#include <cstdlib>
+#include <stdio.h>
+
+// Heimdall
+#include "Heimdall.h"
+#include "Interface.h"
+
+using namespace std;
+using namespace libpit;
+using namespace Heimdall;
+
+const char *Interface::version = "v1.3.0";
+
+const char *Interface::usage = "Usage: heimdall <action> <arguments> [--verbose] [--no-reboot] [--delay <ms>]\n\
+\n\
+action: flash\n\
+arguments:\n\
+ --repartition --pit <filename> [--factoryfs <filename>]\n\
+ [--cache <filename>] [--dbdata <filename>] [--primary-boot <filename>]\n\
+ [--secondary-boot <filename>] [--param <filename>] [--kernel <filename>]\n\
+ [--modem <filename>] [--normal-boot <filename>] [--system <filename>]\n\
+ [--user-data <filename>] [--fota <filename>] [--hidden <filename>]\n\
+ [--movinand <filename>] [--data <filename>] [--ums <filename>]\n\
+ [--emmc <filename>] [--<partition identifier> <filename>]\n\
+ or:\n\
+ [--factoryfs <filename>] [--cache <filename>] [--dbdata <filename>]\n\
+ [--primary-boot <filename>] [--secondary-boot <filename>]\n\
+ [--secondary-boot-backup <filename>] [--param <filename>]\n\
+ [--kernel <filename>] [--recovery <filename>] [--efs <filename>]\n\
+ [--modem <filename>] [--normal-boot <filename>] [--system <filename>]\n\
+ [--user-data <filename>] [--fota <filename>] [--hidden <filename>]\n\
+ [--movinand <filename>] [--data <filename>] [--ums <filename>]\n\
+ [--emmc <filename>] [--<partition identifier> <filename>]\n\
+description: Flashes firmware files to your phone.\n\
+WARNING: If you're repartitioning it's strongly recommended you specify\n\
+ all files at your disposal, including bootloaders.\n\
+\n\
+action: close-pc-screen\n\
+description: Attempts to get rid off the \"connect phone to PC\" screen.\n\
+\n\
+action: detect\n\
+description: Indicates whether or not a download mode device can be detected.\n\
+\n\
+action: dump\n\
+arguments: --chip-type <NAND | RAM> --chip-id <integer> --output <filename>\n\
+description: Attempts to dump data from the phone corresponding to the\n\
+ specified chip type and chip ID.\n\
+NOTE: Galaxy S phones don't appear to properly support this functionality.\n\
+\n\
+action: print-pit\n\
+description: Dumps the PIT file from the connected device and prints it in\n\
+ a human readable format.\n\
+\n\
+action version\n\
+description: Displays the version number of this binary.\n\
+\n\
+action: help\n\
+description: Displays this dialogue.\n";
+
+const char *Interface::releaseInfo = "Heimdall %s, Copyright (c) 2010-2011, Benjamin Dobell, Glass Echidna\n\
+http://www.glassechidna.com.au\n\n\
+This software is provided free of charge. Copying and redistribution is\nencouraged.\n\n\
+If you appreciate this software and you would like to support future\ndevelopment please consider donating:\n\
+http://www.glassechidna.com.au/donate/\n\n";
+
+// Flash arguments
+string Interface::flashValueArguments[kFlashValueArgCount] = {
+ "-pit", "-factoryfs", "-cache", "-dbdata", "-primary-boot", "-secondary-boot", "-secondary-boot-backup", "-param", "-kernel", "-recovery", "-efs", "-modem",
+ "-normal-boot", "-system", "-user-data", "-fota", "-hidden", "-movinand", "-data", "-ums", "-emmc", "-%d"
+};
+
+string Interface::flashValueShortArguments[kFlashValueArgCount] = {
+ "pit", "fs", "cache", "db", "boot", "sbl", "sbl2", "param", "z", "rec", "efs", "m",
+ "norm", "sys", "udata", "fota", "hide", "nand", "data", "ums", "emmc", "%d"
+};
+
+string Interface::flashValuelessArguments[kFlashValuelessArgCount] = {
+ "-repartition"
+};
+
+string Interface::flashValuelessShortArguments[kFlashValuelessArgCount] = {
+ "r"
+};
+
+// Dump arguments
+string Interface::dumpValueArguments[kDumpValueArgCount] = {
+ "-chip-type", "-chip-id", "-output"
+};
+
+string Interface::dumpValueShortArguments[kDumpValueArgCount] = {
+ "type", "id", "out"
+};
+
+// Common arguments
+string Interface::commonValueArguments[kCommonValueArgCount] = {
+ "-delay"
+};
+
+string Interface::commonValueShortArguments[kCommonValueArgCount] = {
+ "d"
+};
+
+string Interface::commonValuelessArguments[kCommonValuelessArgCount] = {
+ "-verbose", "-no-reboot"
+};
+
+string Interface::commonValuelessShortArguments[kCommonValuelessArgCount] = {
+ "v", "nobt"
+};
+
+Action Interface::actions[Interface::kActionCount] = {
+ // kActionFlash
+ Action("flash", flashValueArguments, flashValueShortArguments, kFlashValueArgCount,
+ flashValuelessArguments, flashValuelessShortArguments, kFlashValuelessArgCount),
+
+ // kActionClosePcScreen
+ Action("close-pc-screen", nullptr, nullptr, kClosePcScreenValueArgCount,
+ nullptr, nullptr, kClosePcScreenValuelessArgCount),
+
+ // kActionDump
+ Action("dump", dumpValueArguments, dumpValueShortArguments, kDumpValueArgCount,
+ nullptr, nullptr, kDumpValuelessArgCount),
+
+ // kActionPrintPit
+ Action("print-pit", nullptr, nullptr, kPrintPitValueArgCount,
+ nullptr, nullptr, kPrintPitValuelessArgCount),
+
+ // kActionVersion
+ Action("version", nullptr, nullptr, kVersionValueArgCount,
+ nullptr, nullptr, kVersionValuelessArgCount),
+
+ // kActionHelp
+ Action("help", nullptr, nullptr, kHelpValueArgCount,
+ nullptr, nullptr, kHelpValuelessArgCount),
+
+ // kActionDetect
+ Action("detect", nullptr, nullptr, kDetectValueArgCount,
+ nullptr, nullptr, kDetectValuelessArgCount)
+};
+
+bool Interface::GetArguments(int argc, char **argv, map<string, string>& argumentMap, int *actionIndex)
+{
+ if (argc < 2)
+ {
+ Print(usage, version);
+ return (false);
+ }
+
+ const char *actionName = argv[1];
+ *actionIndex = -1;
+
+ for (int i = 0; i < kActionCount; i++)
+ {
+ if (actions[i].name == actionName)
+ {
+ *actionIndex = i;
+ break;
+ }
+ }
+
+ if (*actionIndex < 0)
+ {
+ Print("Unknown action \"%s\"\n\n", actionName);
+ Print(usage, version);
+ return (false);
+ }
+
+ const Action& action = actions[*actionIndex];
+
+ for (int argIndex = 2; argIndex < argc; argIndex++)
+ {
+ if (*(argv[argIndex]) != '-')
+ {
+ Print(usage, version);
+ return (false);
+ }
+
+ string argumentName = (char *)(argv[argIndex] + 1);
+
+ // Check if the argument is a valid valueless argument
+ bool valid = false;
+
+ for (unsigned int i = 0; i < action.valuelessArgumentCount; i++)
+ {
+ if (argumentName == action.valuelessArguments[i] || argumentName == action.valuelessShortArguments[i])
+ {
+ argumentName = action.valuelessArguments[i];
+ valid = true;
+ break;
+ }
+ }
+
+ if (!valid)
+ {
+ // Check if it's a common valueless argument
+ for (unsigned int i = 0; i < kCommonValuelessArgCount; i++)
+ {
+ if (argumentName == commonValuelessArguments[i] || argumentName == commonValuelessShortArguments[i])
+ {
+ argumentName = commonValuelessArguments[i];
+ valid = true;
+ break;
+ }
+ }
+ }
+
+ if (valid)
+ {
+ // The argument is valueless
+ argumentMap.insert(pair<string, string>(argumentName, ""));
+ continue;
+ }
+
+ // Check if the argument is a valid value argument
+ for (unsigned int i = 0; i < action.valueArgumentCount; i++)
+ {
+ // Support for --<integer> and -<integer> parameters.
+ if (argumentName.length() > 1 && action.valueArguments[i] == "-%d")
+ {
+ if (atoi(argumentName.substr(1).c_str()) > 0 || argumentName == "-0")
+ {
+ valid = true;
+ break;
+ }
+ }
+ else if (action.valueArguments[i] == "%d")
+ {
+ if (atoi(argumentName.c_str()) > 0 || argumentName == "0")
+ {
+ argumentName = "-" + argumentName;
+ valid = true;
+ break;
+ }
+ }
+
+ if (argumentName == action.valueArguments[i] || argumentName == action.valueShortArguments[i])
+ {
+ argumentName = action.valueArguments[i];
+ valid = true;
+ break;
+ }
+ }
+
+ if (!valid)
+ {
+ // Check if it's a common value argument
+ for (unsigned int i = 0; i < kCommonValueArgCount; i++)
+ {
+ // Support for --<integer> and -<integer> parameters.
+ if (argumentName.length() > 1 && commonValueArguments[i] == "-%d")
+ {
+ if (atoi(argumentName.substr(1).c_str()) > 0 || argumentName == "-0")
+ {
+ valid = true;
+ break;
+ }
+ }
+ else if (commonValueArguments[i] == "%d")
+ {
+ if (atoi(argumentName.c_str()) > 0 || argumentName == "0")
+ {
+ argumentName = "-" + argumentName;
+ valid = true;
+ break;
+ }
+ }
+
+ if (argumentName == commonValueArguments[i] || argumentName == commonValueShortArguments[i])
+ {
+ argumentName = commonValueArguments[i];
+ valid = true;
+ break;
+ }
+ }
+ }
+
+ if (!valid)
+ {
+ PrintError("\"%s\" is not a valid argument\n", argumentName.c_str());
+ return (false);
+ }
+
+ argIndex++;
+
+ if (argIndex >= argc)
+ {
+ PrintError("\"%s\" is missing a value\n", argumentName.c_str());
+ return (false);
+ }
+
+ argumentMap.insert(pair<string, string>(argumentName, argv[argIndex]));
+ }
+
+ return (true);
+}
+
+void Interface::Print(const char *format, ...)
+{
+ va_list args;
+
+ va_start(args, format);
+ vfprintf(stdout, format, args);
+ va_end(args);
+
+ fflush(stdout); // Make sure output isn't buffered.
+}
+
+void Interface::PrintError(const char *format, ...)
+{
+ va_list args;
+
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+
+ fflush(stderr); // Make sure output isn't buffered.
+}
+
+void Interface::PrintVersion(void)
+{
+ Print("%s\n", version);
+}
+
+void Interface::PrintUsage(void)
+{
+ Print(usage);
+}
+
+void Interface::PrintReleaseInfo(void)
+{
+ Print(releaseInfo, version);
+}
+
+void Interface::PrintPit(const PitData *pitData)
+{
+ Interface::Print("Entry Count: %d\n", pitData->GetEntryCount());
+
+ Interface::Print("Unknown 1: %d\n", pitData->GetUnknown1());
+ Interface::Print("Unknown 2: %d\n", pitData->GetUnknown2());
+ Interface::Print("Unknown 3: %d\n", pitData->GetUnknown3());
+ Interface::Print("Unknown 4: %d\n", pitData->GetUnknown4());
+ Interface::Print("Unknown 5: %d\n", pitData->GetUnknown5());
+ Interface::Print("Unknown 6: %d\n", pitData->GetUnknown6());
+ Interface::Print("Unknown 7: %d\n", pitData->GetUnknown7());
+ Interface::Print("Unknown 8: %d\n", pitData->GetUnknown8());
+
+ for (unsigned int i = 0; i < pitData->GetEntryCount(); i++)
+ {
+ const PitEntry *entry = pitData->GetEntry(i);
+
+ Interface::Print("\n\n--- Entry #%d ---\n", i);
+ Interface::Print("Unused: %s\n", (entry->GetUnused()) ? "Yes" : "No");
+
+ const char *partitionTypeText = "Unknown";
+
+ if (entry->GetPartitionType() == PitEntry::kPartitionTypeRfs)
+ partitionTypeText = "RFS";
+ else if (entry->GetPartitionType() == PitEntry::kPartitionTypeExt4)
+ partitionTypeText = "EXT4";
+
+ Interface::Print("Partition Type: %d (%s)\n", entry->GetPartitionType(), partitionTypeText);
+
+ Interface::Print("Partition Identifier: %d\n", entry->GetPartitionIdentifier());
+
+ Interface::Print("Partition Flags: %d (", entry->GetPartitionFlags());
+
+ if (entry->GetPartitionFlags() & PitEntry::kPartitionFlagWrite)
+ Interface::Print("R/W");
+ else
+ Interface::Print("R");
+
+ Interface::Print(")\n");
+
+ Interface::Print("Unknown 1: %d\n", entry->GetUnknown1());
+
+ Interface::Print("Partition Block Size: %d\n", entry->GetPartitionBlockSize());
+ Interface::Print("Partition Block Count: %d\n", entry->GetPartitionBlockCount());
+
+ Interface::Print("Unknown 2: %d\n", entry->GetUnknown2());
+ Interface::Print("Unknown 3: %d\n", entry->GetUnknown3());
+
+ Interface::Print("Partition Name: %s\n", entry->GetPartitionName());
+ Interface::Print("Filename: %s\n", entry->GetFilename());
+ }
+
+ Interface::Print("\n");
+}
diff --git a/heimdall/source/Interface.h b/heimdall/source/Interface.h
new file mode 100644
index 0000000..c6bdef3
--- /dev/null
+++ b/heimdall/source/Interface.h
@@ -0,0 +1,255 @@
+/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+#ifndef INTERFACE_H
+#define INTERFACE_H
+
+// C/C++ Standard Library
+#include <map>
+#include <string>
+
+// libpit
+#include "libpit.h"
+
+using namespace std;
+using namespace libpit;
+
+namespace Heimdall
+{
+ struct Action
+ {
+ public:
+
+ string name;
+
+ string *valueArguments;
+ string *valueShortArguments;
+ unsigned int valueArgumentCount;
+
+ string *valuelessArguments;
+ string *valuelessShortArguments;
+ unsigned int valuelessArgumentCount;
+
+ Action(const char *name, string *valueArguments, string *valueShortArguments, unsigned int valueArgumentCount,
+ string *valuelessArguments, string *valuelessShortArguments, unsigned int valuelessArgumentCount)
+ {
+ this->name = name;
+
+ this->valueArguments = valueArguments;
+ this->valueShortArguments = valueShortArguments;
+ this->valueArgumentCount = valueArgumentCount;
+
+ this->valuelessArguments = valuelessArguments;
+ this->valuelessShortArguments = valuelessShortArguments;
+ this->valuelessArgumentCount = valuelessArgumentCount;
+ }
+ };
+
+ class Interface
+ {
+ public:
+
+ // Actions
+ enum
+ {
+ kActionFlash = 0,
+ kActionClosePcScreen,
+ kActionDump,
+ kActionPrintPit,
+ kActionVersion,
+ kActionHelp,
+ kActionDetect,
+ kActionCount
+ };
+
+ // Flash value arguments
+ enum
+ {
+ kFlashValueArgPit,
+ kFlashValueArgFactoryFs,
+ kFlashValueArgCache,
+ kFlashValueArgDatabaseData,
+ kFlashValueArgPrimaryBootloader,
+ kFlashValueArgSecondaryBootloader,
+ kFlashValueArgSecondaryBootloaderBackup,
+ kFlashValueArgParam,
+ kFlashValueArgKernel,
+ kFlashValueArgRecovery,
+ kFlashValueArgEfs,
+ kFlashValueArgModem,
+
+ kFlashValueArgNormalBoot,
+ kFlashValueArgSystem,
+ kFlashValueArgUserData,
+ kFlashValueArgFota,
+ kFlashValueArgHidden,
+ kFlashValueArgMovinand,
+ kFlashValueArgData,
+ kFlashValueArgUms,
+ kFlashValueArgEmmc,
+
+ kFlashValueArgPartitionIndex,
+
+ kFlashValueArgCount
+ };
+
+ // Flash valueless arguments
+ enum
+ {
+ kFlashValuelessArgRepartition = 0,
+
+ kFlashValuelessArgCount
+ };
+
+ // Close PC Screen value arguments
+ enum
+ {
+ kClosePcScreenValueArgCount = 0
+ };
+
+ // Close PC Screen valueless arguments
+ enum
+ {
+ kClosePcScreenValuelessArgCount = 0
+ };
+
+ // Dump value arguments
+ enum
+ {
+ kDumpValueArgChipType = 0,
+ kDumpValueArgChipId,
+ kDumpValueArgOutput,
+
+ kDumpValueArgCount
+ };
+
+ // Dump valueless arguments
+ enum
+ {
+ kDumpValuelessArgCount = 0
+ };
+
+ // Print PIT value arguments
+ enum
+ {
+ kPrintPitValueArgCount = 0
+ };
+
+ // Print PIT valueless arguments
+ enum
+ {
+ kPrintPitValuelessArgCount = 0
+ };
+
+ // Version value arguments
+ enum
+ {
+ kVersionValueArgCount = 0
+ };
+
+ // Version valueless arguments
+ enum
+ {
+ kVersionValuelessArgCount = 0
+ };
+
+ // Help value arguments
+ enum
+ {
+ kHelpValueArgCount = 0
+ };
+
+ // Help valueless arguments
+ enum
+ {
+ kHelpValuelessArgCount = 0
+ };
+
+ // Detect value arguments
+ enum
+ {
+ kDetectValueArgCount = 0
+ };
+
+ // Detect valueless arguments
+ enum
+ {
+ kDetectValuelessArgCount = 0
+ };
+
+ // Common value arguments
+ enum
+ {
+ kCommonValueArgDelay = 0,
+
+ kCommonValueArgCount
+ };
+
+ // Comon valueless arguments
+ enum
+ {
+ kCommonValuelessArgVerbose = 0,
+ kCommonValuelessArgNoReboot,
+
+ kCommonValuelessArgCount
+ };
+
+ private:
+
+ static const char *version;
+ static const char *usage;
+ static const char *releaseInfo;
+
+ // Flash arguments
+ static string flashValueArguments[kFlashValueArgCount];
+ static string flashValueShortArguments[kFlashValueArgCount];
+
+ static string flashValuelessArguments[kFlashValuelessArgCount];
+ static string flashValuelessShortArguments[kFlashValuelessArgCount];
+
+ // Dump arguments
+ static string dumpValueArguments[kDumpValueArgCount];
+ static string dumpValueShortArguments[kDumpValueArgCount];
+
+ public:
+
+ // Common arguments
+ static string commonValueArguments[kCommonValueArgCount];
+ static string commonValueShortArguments[kCommonValueArgCount];
+
+ static string commonValuelessArguments[kCommonValuelessArgCount];
+ static string commonValuelessShortArguments[kCommonValuelessArgCount];
+
+ static Action actions[kActionCount];
+
+ static bool GetArguments(int argc, char **argv, map<string, string>& argumentMap, int *actionIndex);
+
+ static void Print(const char *format, ...);
+ static void PrintError(const char *format, ...);
+
+ static void PrintVersion(void);
+ static void PrintUsage(void);
+ static void PrintReleaseInfo(void);
+
+ static void PrintPit(const PitData *pitData);
+ };
+}
+
+#endif
diff --git a/heimdall/source/InterfaceManager.cpp b/heimdall/source/InterfaceManager.cpp
deleted file mode 100644
index 26ef028..0000000
--- a/heimdall/source/InterfaceManager.cpp
+++ /dev/null
@@ -1,325 +0,0 @@
-/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
-
- Permission is hereby granted, free of charge, to any person obtaining a copy
- of this software and associated documentation files (the "Software"), to deal
- in the Software without restriction, including without limitation the rights
- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- copies of the Software, and to permit persons to whom the Software is
- furnished to do so, subject to the following conditions:
-
- The above copyright notice and this permission notice shall be included in
- all copies or substantial portions of the Software.
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- THE SOFTWARE.*/
-
-// C/C++ Standard Library
-#include <cstdarg>
-#include <cstdlib>
-#include <stdio.h>
-
-// Heimdall
-#include "Heimdall.h"
-#include "InterfaceManager.h"
-
-using namespace std;
-using namespace Heimdall;
-
-string InterfaceManager::actionNames[kActionCount] = { "flash", "close-pc-screen", "dump", "print-pit", "help" };
-
-string InterfaceManager::flashArgumentNames[kFlashArgCount * 2] = {
- // --- Long Names ---
- "-repartition",
-
- "-pit", "-factoryfs", "-cache", "-dbdata", "-primary-boot", "-secondary-boot", "-secondary-boot-backup", "-param", "-kernel", "-recovery", "-efs", "-modem",
- "-normal-boot", "-system", "-user-data", "-fota", "-hidden", "-movinand", "-data", "-ums", "-emmc", "-%d",
-
- // --- Short Names ---
- "r",
-
- "pit", "fs", "cache", "db", "boot", "sbl", "sbl2", "param", "z", "rec", "efs", "m",
- "norm", "sys", "udata", "fota", "hide", "nand", "data", "ums", "emmc", "%d"
-};
-
-string InterfaceManager::dumpArgumentNames[kDumpArgCount * 2] = {
- // --- Long Names ---
- "-chip-type", "-chip-id", "-output",
-
- // --- Short Names ---
- "type", "id", "out"
-};
-
-string InterfaceManager::commonArgumentNames[kCommonArgCount * 2] = {
- // --- Long Names ---
- "-verbose", "-no-reboot",
-
- "-delay",
-
- // --- Short Names ---
- "v", "nobt",
-
- "d"
-};
-
-// argumentNames[kActionCount][] stores common arguments.
-string *InterfaceManager::actionArgumentNames[kActionCount + 1] = {
- // kActionFlash
- flashArgumentNames,
-
- // kActionClosePcScreen
- nullptr,
-
- // kActionDump
- dumpArgumentNames,
-
- // kActionPrintPit
- nullptr,
-
- // kActionHelp
- nullptr,
-
- // Common (kActionCount)
- commonArgumentNames
-};
-
-int InterfaceManager::actionArgumentCounts[kActionCount + 1] = {
- kFlashArgCount, 0, kDumpArgCount, 0, 0, kCommonArgCount
-};
-
-int InterfaceManager::actionValuelessArgumentCounts[kActionCount + 1] = {
- kFlashArgPit, 0, kDumpArgChipType, 0, 0, kCommonArgDelay
-};
-
-const char *InterfaceManager::usage = "\nHeimdall v1.2.0, Copyright (c) 2010-2011, Benjamin Dobell, Glass Echidna\n\n\
-Usage: heimdall <action> <arguments> [--verbose] [--no-reboot] [--delay <ms>]\n\
-\n\
-action: flash\n\
-arguments:\n\
- --repartition --pit <filename> [--factoryfs <filename>]\n\
- [--cache <filename>] [--dbdata <filename>] [--primary-boot <filename>]\n\
- [--secondary-boot <filename>] [--param <filename>] [--kernel <filename>]\n\
- [--modem <filename>] [--normal-boot <filename>] [--system <filename>]\n\
- [--user-data <filename>] [--fota <filename>] [--hidden <filename>]\n\
- [--movinand <filename>] [--data <filename>] [--ums <filename>]\n\
- [--emmc <filename>] [--<partition identifier> <filename>]\n\
- or:\n\
- [--factoryfs <filename>] [--cache <filename>] [--dbdata <filename>]\n\
- [--primary-boot <filename>] [--secondary-boot <filename>]\n\
- [--secondary-boot-backup <filename>] [--param <filename>]\n\
- [--kernel <filename>] [--recovery <filename>] [--efs <filename>]\n\
- [--modem <filename>] [--normal-boot <filename>] [--system <filename>]\n\
- [--user-data <filename>] [--fota <filename>] [--hidden <filename>]\n\
- [--movinand <filename>] [--data <filename>] [--ums <filename>]\n\
- [--emmc <filename>] [--<partition identifier> <filename>]\n\
-description: Flashes firmware files to your phone.\n\
-WARNING: If you're repartitioning it's strongly recommended you specify\n\
- all files at your disposal, including bootloaders.\n\
-\n\
-action: close-pc-screen\n\
-description: Attempts to get rid off the \"connect phone to PC\" screen.\n\
-\n\
-action: dump\n\
-arguments: --chip-type <NAND | RAM> --chip-id <integer> --output <filename>\n\
-description: Attempts to dump data from the phone corresponding to the\n\
- specified chip type and chip ID.\n\
-NOTE: Galaxy S phones don't appear to properly support this functionality.\n\
-\n\
-action: print-pit\n\
-description: Dumps the PIT file from the connected device and prints it in\n\
- a human readable format.\n\
-\n\
-action: help\n\
-description: Display this dialogue.\n";
-
-bool InterfaceManager::GetArguments(int argc, char **argv, map<string, string>& argumentMap, int *actionIndex)
-{
- if (argc < 2)
- {
- Print(usage);
- return (false);
- }
-
- const char *actionName = argv[1];
- *actionIndex = -1;
-
- for (int i = 0; i < kActionCount; i++)
- {
- if (actionNames[i] == actionName)
- {
- *actionIndex = i;
- break;
- }
- }
-
- if (*actionIndex < 0)
- {
- Print("Unknown action \"%s\"\n\n", actionName);
- Print(usage);
- return (false);
- }
-
- int actionArgumentCount = actionArgumentCounts[*actionIndex];
- int commonArgumentCount = actionArgumentCounts[kActionCount];
-
- int actionValuelessArgumentCount = actionValuelessArgumentCounts[*actionIndex];
- int commonValuelessArgumentCount = actionValuelessArgumentCounts[kActionCount];
-
- string *argumentNames = actionArgumentNames[*actionIndex];
- string *commonArgumentNames = actionArgumentNames[kActionCount];
-
- for (int argIndex = 2; argIndex < argc; argIndex++)
- {
- if (*(argv[argIndex]) != '-')
- {
- Print(usage);
- return (false);
- }
-
- string argumentName = (char *)(argv[argIndex] + 1);
-
- // Check if the argument is a valid valueless argument
- bool valid = false;
-
- for (int i = 0; i < actionValuelessArgumentCount; i++)
- {
- if (argumentName == argumentNames[i] || argumentName == argumentNames[actionArgumentCount + i])
- {
- argumentName = argumentNames[i];
- valid = true;
- break;
- }
- }
-
- if (!valid)
- {
- // Check if it's a common valueless argument
- for (int i = 0; i < commonValuelessArgumentCount; i++)
- {
- if (argumentName == commonArgumentNames[i] || argumentName == commonArgumentNames[commonArgumentCount + i])
- {
- argumentName = commonArgumentNames[i];
- valid = true;
- break;
- }
- }
- }
-
- if (valid)
- {
- // The argument is valueless
- argumentMap.insert(pair<string, string>(argumentName, ""));
- continue;
- }
-
- if (argumentNames != nullptr)
- {
- // Check if the argument is a valid regular argument
- for (int i = actionValuelessArgumentCount; i < actionArgumentCount; i++)
- {
- // Support for --<integer> and -<integer> parameters.
- if (argumentName.length() > 1 && argumentNames[i].compare("-%d") == 0)
- {
- if (atoi(argumentName.substr(1).c_str()) > 0 || argumentName.compare("-0") == 0)
- {
- valid = true;
- break;
- }
- }
- else if (argumentNames[i].compare("%d") == 0)
- {
- if (atoi(argumentName.c_str()) > 0 || argumentName.compare("0") == 0)
- {
- argumentName = "-" + argumentName;
- valid = true;
- break;
- }
- }
-
- if (argumentName == argumentNames[i] || argumentName == argumentNames[actionArgumentCount + i])
- {
- argumentName = argumentNames[i];
- valid = true;
- break;
- }
- }
- }
-
- if (!valid)
- {
- // Check if it's a common regular argument
- for (int i = commonValuelessArgumentCount; i < commonArgumentCount; i++)
- {
- // Support for --<integer> and -<integer> parameters.
- if (argumentName.length() > 1 && commonArgumentNames[i].compare("-%d"))
- {
- if (atoi(argumentName.substr(1).c_str()) > 0 || argumentName.compare("-0") == 0)
- {
- valid = true;
- break;
- }
- }
- else if (commonArgumentNames[i].compare("%d"))
- {
- if (atoi(argumentName.c_str()) > 0 || argumentName.compare("0") == 0)
- {
- argumentName = "-" + argumentName;
- valid = true;
- break;
- }
- }
-
- if (argumentName == commonArgumentNames[i] || argumentName == commonArgumentNames[commonArgumentCount + i])
- {
- argumentName = commonArgumentNames[i];
- valid = true;
- break;
- }
- }
- }
-
- if (!valid)
- {
- PrintError("\"%s\" is not a valid argument\n", argumentName.c_str());
- return (false);
- }
-
- argIndex++;
-
- if (argIndex >= argc)
- {
- PrintError("\"%s\" is missing a value\n", argumentName.c_str());
- return (false);
- }
-
- argumentMap.insert(pair<string, string>(argumentName, argv[argIndex]));
- }
-
- return (true);
-}
-
-void InterfaceManager::Print(const char *format, ...)
-{
- va_list args;
-
- va_start(args, format);
- vfprintf(stdout, format, args);
- va_end(args);
-
- fflush(stdout); // Make sure output isn't buffered.
-}
-
-void InterfaceManager::PrintError(const char *format, ...)
-{
- va_list args;
-
- va_start(args, format);
- vfprintf(stderr, format, args);
- va_end(args);
-
- fflush(stderr); // Make sure output isn't buffered.
-}
diff --git a/heimdall/source/InterfaceManager.h b/heimdall/source/InterfaceManager.h
deleted file mode 100644
index 1f5ba94..0000000
--- a/heimdall/source/InterfaceManager.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Copyright (c) 2010 Benjamin Dobell, Glass Echidna
-
- Permission is hereby granted, free of charge, to any person obtaining a copy
- of this software and associated documentation files (the "Software"), to deal
- in the Software without restriction, including without limitation the rights
- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- copies of the Software, and to permit persons to whom the Software is
- furnished to do so, subject to the following conditions:
-
- The above copyright notice and this permission notice shall be included in
- all copies or substantial portions of the Software.
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- THE SOFTWARE.*/
-
-#ifndef INTERFACEMANAGER_H
-#define INTERFACEMANAGER_H
-
-// C/C++ Standard Library
-#include <map>
-#include <string>
-
-using namespace std;
-
-namespace Heimdall
-{
- class InterfaceManager
- {
- public:
-
- enum
- {
- kActionFlash = 0,
- kActionClosePcScreen,
- kActionDump,
- kActionPrintPit,
- kActionHelp,
- kActionCount
- };
-
- enum
- {
- // Valueless arguments
- kFlashArgRepartition = 0,
-
- // Regular arguments
- kFlashArgPit,
- kFlashArgFactoryFs,
- kFlashArgCache,
- kFlashArgDatabaseData,
- kFlashArgPrimaryBootloader,
- kFlashArgSecondaryBootloader,
- kFlashArgSecondaryBootloaderBackup,
- kFlashArgParam,
- kFlashArgKernel,
- kFlashArgRecovery,
- kFlashArgEfs,
- kFlashArgModem,
-
- kFlashArgNormalBoot,
- kFlashArgSystem,
- kFlashArgUserData,
- kFlashArgFota,
- kFlashArgHidden,
- kFlashArgMovinand,
- kFlashArgData,
- kFlashArgUms,
- kFlashArgEmmc,
-
- kFlashArgPartitionIndex,
-
- kFlashArgCount
- };
-
- enum
- {
- // Regular arguments
- kDumpArgChipType = 0,
- kDumpArgChipId,
- kDumpArgOutput,
-
- kDumpArgCount
- };
-
- enum
- {
- // Valueless arguments
- kCommonArgVerbose = 0,
- kCommonArgNoReboot,
-
- // Regular arguments
- kCommonArgDelay,
-
- kCommonArgCount
- };
-
- static string actionNames[kActionCount];
-
- static string flashArgumentNames[kFlashArgCount * 2];
- static string dumpArgumentNames[kDumpArgCount * 2];
- static string commonArgumentNames[kCommonArgCount * 2];
-
- // argumentNames[kActionCount][] defines common arguments.
- static string *actionArgumentNames[kActionCount + 1];
-
- static int actionArgumentCounts[kActionCount + 1];
- static int actionValuelessArgumentCounts[kActionCount + 1];
-
- static const char *usage;
-
- static bool GetArguments(int argc, char **argv, map<string, string>& argumentMap, int *actionIndex);
-
- static void Print(const char *format, ...);
- static void PrintError(const char *format, ...);
- };
-}
-
-#endif
diff --git a/heimdall/source/OutboundPacket.h b/heimdall/source/OutboundPacket.h
index dbe3f8a..8f8e6c6 100644
--- a/heimdall/source/OutboundPacket.h
+++ b/heimdall/source/OutboundPacket.h
@@ -21,7 +21,7 @@
#ifndef OUTBOUNDPACKET_H
#define OUTBOUNDPACKET_H
-// Heimdall include
+// Heimdall
#include "Packet.h"
namespace Heimdall
diff --git a/heimdall/source/main.cpp b/heimdall/source/main.cpp
index 84260f0..64cc553 100644
--- a/heimdall/source/main.cpp
+++ b/heimdall/source/main.cpp
@@ -24,14 +24,16 @@
#include <stdio.h>
#include <string>
+// libpit
+#include "libpit.h"
+
// Heimdall
#include "BridgeManager.h"
#include "DeviceInfoPacket.h"
#include "DeviceInfoResponse.h"
#include "EndModemFileTransferPacket.h"
#include "EndPhoneFileTransferPacket.h"
-#include "InterfaceManager.h"
-#include "PitData.h"
+#include "Interface.h"
using namespace std;
using namespace Heimdall;
@@ -110,6 +112,26 @@ void initialiseKnownPartitionNames(void)
knownPartitionNames[kKnownPartitionEmmc].push_back("GANG");
}
+bool isKnownPartition(const char *partitionName, unsigned int knownPartitionIndex)
+{
+ for (unsigned int i = 0; i < knownPartitionNames[knownPartitionIndex].size(); i++)
+ {
+ if (strcmp(partitionName, knownPartitionNames[knownPartitionIndex][i]) == 0)
+ return (true);
+ }
+
+ return (false);
+}
+
+bool isKnownBootPartition(const char *partitionName)
+{
+ return (isKnownPartition(partitionName, kKnownPartitionPrimaryBootloader) ||
+ isKnownPartition(partitionName, kKnownPartitionSecondaryBootloader) ||
+ isKnownPartition(partitionName, kKnownPartitionSecondaryBootloaderBackup) ||
+ isKnownPartition(partitionName, kKnownPartitionParam) ||
+ isKnownPartition(partitionName, kKnownPartitionNormalBoot));
+}
+
bool openFiles(const map<string, string>& argumentMap, map<string, FILE *>& argumentFileMap)
{
map<string, string>::const_iterator it = argumentMap.begin();
@@ -130,7 +152,7 @@ bool openFiles(const map<string, string>& argumentMap, map<string, FILE *>& argu
// The argument wasn't a partition index, check if it's a known partition name.
for (int knownPartition = 0; knownPartition < kKnownPartitionCount; knownPartition++)
{
- if (it->first.compare(InterfaceManager::flashArgumentNames[InterfaceManager::kFlashArgPit + knownPartition]) == 0)
+ if (it->first == Interface::actions[Interface::kActionFlash].valueArguments[knownPartition])
{
isFileArgument = true;
break;
@@ -147,7 +169,7 @@ bool openFiles(const map<string, string>& argumentMap, map<string, FILE *>& argu
if (!argumentFilePair.second)
{
- InterfaceManager::PrintError("Failed to open file \"%s\"\n", it->second.c_str());
+ Interface::PrintError("Failed to open file \"%s\"\n", it->second.c_str());
return (false);
}
@@ -179,7 +201,7 @@ bool mapFilesToPartitions(const map<string, FILE *>& argumentFileMap, const PitD
for (knownPartition = 0; knownPartition < kKnownPartitionCount; knownPartition++)
{
- if (it->first.compare(InterfaceManager::flashArgumentNames[InterfaceManager::kFlashArgPit + knownPartition]) == 0)
+ if (it->first == Interface::actions[Interface::kActionFlash].valueArguments[knownPartition])
break;
}
@@ -195,7 +217,7 @@ bool mapFilesToPartitions(const map<string, FILE *>& argumentFileMap, const PitD
if (!pitEntry)
{
- InterfaceManager::PrintError("Partition corresponding to %s argument could not be located\n", it->first.c_str());
+ Interface::PrintError("Partition corresponding to %s argument could not be located\n", it->first.c_str());
return (false);
}
@@ -216,18 +238,18 @@ void closeFiles(map<string, FILE *> argumentfileMap)
int downloadPitFile(BridgeManager *bridgeManager, unsigned char **pitBuffer)
{
- InterfaceManager::Print("Downloading device's PIT file...\n");
+ Interface::Print("Downloading device's PIT file...\n");
int devicePitFileSize = bridgeManager->ReceivePitFile(pitBuffer);
if (!*pitBuffer)
{
- InterfaceManager::PrintError("Failed to download PIT file!\n");
+ Interface::PrintError("Failed to download PIT file!\n");
return (-1);
}
- InterfaceManager::Print("PIT file download sucessful\n\n");
+ Interface::Print("PIT file download sucessful\n\n");
return devicePitFileSize;
}
@@ -247,16 +269,16 @@ bool flashFile(BridgeManager *bridgeManager, unsigned int partitionIndex, const
if (isPit)
{
- InterfaceManager::Print("Uploading %s\n", partitionName);
+ Interface::Print("Uploading %s\n", partitionName);
if (bridgeManager->SendPitFile(file))
{
- InterfaceManager::Print("%s upload successful\n", partitionName);
+ Interface::Print("%s upload successful\n", partitionName);
return (true);
}
else
{
- InterfaceManager::PrintError("%s upload failed!\n", partitionName);
+ Interface::PrintError("%s upload failed!\n", partitionName);
return (false);
}
}
@@ -276,34 +298,34 @@ bool flashFile(BridgeManager *bridgeManager, unsigned int partitionIndex, const
if (isModem)
{
- InterfaceManager::Print("Uploading %s\n", partitionName);
+ Interface::Print("Uploading %s\n", partitionName);
//if (bridgeManager->SendFile(file, EndPhoneFileTransferPacket::kDestinationPhone, // <-- Kies method. WARNING: Doesn't work on Galaxy Tab!
// EndPhoneFileTransferPacket::kFileModem))
if (bridgeManager->SendFile(file, EndModemFileTransferPacket::kDestinationModem)) // <-- Odin method
{
- InterfaceManager::Print("%s upload successful\n", partitionName);
+ Interface::Print("%s upload successful\n", partitionName);
return (true);
}
else
{
- InterfaceManager::PrintError("%s upload failed!\n", partitionName);
+ Interface::PrintError("%s upload failed!\n", partitionName);
return (false);
}
}
else
{
// We're uploading to a phone partition
- InterfaceManager::Print("Uploading %s\n", partitionName);
+ Interface::Print("Uploading %s\n", partitionName);
if (bridgeManager->SendFile(file, EndPhoneFileTransferPacket::kDestinationPhone, partitionIndex))
{
- InterfaceManager::Print("%s upload successful\n", partitionName);
+ Interface::Print("%s upload successful\n", partitionName);
return (true);
}
else
{
- InterfaceManager::PrintError("%s upload failed!\n", partitionName);
+ Interface::PrintError("%s upload failed!\n", partitionName);
return (false);
}
}
@@ -318,63 +340,31 @@ bool attemptFlash(BridgeManager *bridgeManager, map<string, FILE *> argumentFile
// ---------- GET DEVICE INFORMATION ----------
- DeviceInfoPacket *deviceInfoPacket = new DeviceInfoPacket(DeviceInfoPacket::kUnknown1);
- success = bridgeManager->SendPacket(deviceInfoPacket);
- delete deviceInfoPacket;
-
- if (!success)
- {
- InterfaceManager::PrintError("Failed to send device info packet!\nFailed Request: kUnknown1\n");
- return (false);
- }
-
- DeviceInfoResponse *deviceInfoResponse = new DeviceInfoResponse();
- success = bridgeManager->ReceivePacket(deviceInfoResponse);
- int unknown = deviceInfoResponse->GetUnknown();
- delete deviceInfoResponse;
-
- if (!success)
- {
- InterfaceManager::PrintError("Failed to receive device info response!\n");
+ int deviceInfoResult;
+
+ if (!bridgeManager->RequestDeviceInfo(DeviceInfoPacket::kUnknown1, &deviceInfoResult))
return (false);
- }
// 131072 for Galaxy S II, 0 for other devices.
- if (unknown != 0 && unknown != 131072)
+ if (deviceInfoResult != 0 && deviceInfoResult != 131072)
{
- InterfaceManager::PrintError("Unexpected device info response!\nExpected: 0\nReceived:%i\n", unknown);
+ Interface::PrintError("Unexpected device info response!\nExpected: 0\nReceived:%i\n", deviceInfoResult);
return (false);
}
// -------------------- KIES DOESN'T DO THIS --------------------
- deviceInfoPacket = new DeviceInfoPacket(DeviceInfoPacket::kUnknown2);
- success = bridgeManager->SendPacket(deviceInfoPacket);
- delete deviceInfoPacket;
- if (!success)
- {
- InterfaceManager::PrintError("Failed to send device info packet!\nFailed Request: kUnknown2\n");
+ if (!bridgeManager->RequestDeviceInfo(DeviceInfoPacket::kUnknown2, &deviceInfoResult))
return (false);
- }
-
- deviceInfoResponse = new DeviceInfoResponse();
- success = bridgeManager->ReceivePacket(deviceInfoResponse);
- unknown = deviceInfoResponse->GetUnknown();
- delete deviceInfoResponse;
-
- if (!success)
- {
- InterfaceManager::PrintError("Failed to receive device info response!\n");
- return (false);
- }
// TODO: Work out what this value is... it has been either 180 or 0 for Galaxy S phones, 3 on the Galaxy Tab, 190 for SHW-M110S.
- if (unknown != 180 && unknown != 0 && unknown != 3 && unknown != 190)
+ if (deviceInfoResult != 180 && deviceInfoResult != 0 && deviceInfoResult != 3 && deviceInfoResult != 190)
{
- InterfaceManager::PrintError("Unexpected device info response!\nExpected: 180, 0 or 3\nReceived:%i\n", unknown);
+ Interface::PrintError("Unexpected device info response!\nExpected: 180, 0 or 3\nReceived:%i\n", deviceInfoResult);
return (false);
}
- // --------------------------------------------------------------
+
+ // ------------- SEND TOTAL BYTES TO BE TRANSFERRED -------------
int totalBytes = 0;
for (map<string, FILE *>::const_iterator it = argumentFileMap.begin(); it != argumentFileMap.end(); it++)
@@ -384,30 +374,30 @@ bool attemptFlash(BridgeManager *bridgeManager, map<string, FILE *> argumentFile
rewind(it->second);
}
- deviceInfoPacket = new DeviceInfoPacket(DeviceInfoPacket::kTotalBytes, totalBytes);
+ DeviceInfoPacket *deviceInfoPacket = new DeviceInfoPacket(DeviceInfoPacket::kTotalBytes, totalBytes);
success = bridgeManager->SendPacket(deviceInfoPacket);
delete deviceInfoPacket;
if (!success)
{
- InterfaceManager::PrintError("Failed to send total bytes device info packet!\n");
+ Interface::PrintError("Failed to send total bytes device info packet!\n");
return (false);
}
- deviceInfoResponse = new DeviceInfoResponse();
+ DeviceInfoResponse *deviceInfoResponse = new DeviceInfoResponse();
success = bridgeManager->ReceivePacket(deviceInfoResponse);
- unknown = deviceInfoResponse->GetUnknown();
+ deviceInfoResult = deviceInfoResponse->GetUnknown();
delete deviceInfoResponse;
if (!success)
{
- InterfaceManager::PrintError("Failed to receive device info response!\n");
+ Interface::PrintError("Failed to receive device info response!\n");
return (false);
}
- if (unknown != 0)
+ if (deviceInfoResult != 0)
{
- InterfaceManager::PrintError("Unexpected device info response!\nExpected: 0\nReceived:%i\n", unknown);
+ Interface::PrintError("Unexpected device info response!\nExpected: 0\nReceived:%i\n", deviceInfoResult);
return (false);
}
@@ -419,13 +409,12 @@ bool attemptFlash(BridgeManager *bridgeManager, map<string, FILE *> argumentFile
if (repartition)
{
// If we're repartitioning then we need to unpack the information from the specified PIT file.
-
- map<string, FILE *>::iterator it = argumentFileMap.find(InterfaceManager::flashArgumentNames[InterfaceManager::kFlashArgPit]);
+ map<string, FILE *>::iterator it = argumentFileMap.find(Interface::actions[Interface::kActionFlash].valueArguments[Interface::kFlashValueArgPit]);
// This shouldn't ever happen due to early checks, but we'll check again just in case...
if (it == argumentFileMap.end())
{
- InterfaceManager::PrintError("Attempt was made to repartition without specifying a PIT file!\n");
+ Interface::PrintError("Attempt was made to repartition without specifying a PIT file!\n");
return (false);
}
@@ -451,7 +440,6 @@ bool attemptFlash(BridgeManager *bridgeManager, map<string, FILE *> argumentFile
else
{
// If we're not repartitioning then we need to retrieve the device's PIT file and unpack it.
-
unsigned char *pitFileBuffer;
downloadPitFile(bridgeManager, &pitFileBuffer);
@@ -463,9 +451,13 @@ bool attemptFlash(BridgeManager *bridgeManager, map<string, FILE *> argumentFile
map<unsigned int, PartitionNameFilePair> partitionFileMap;
- // Map the files being flashed to partitions stored in PIT file.
- mapFilesToPartitions(argumentFileMap, pitData, partitionFileMap);
-
+ // Map the files being flashed to partitions stored in the PIT file.
+ if (!mapFilesToPartitions(argumentFileMap, pitData, partitionFileMap))
+ {
+ delete pitData;
+ return (false);
+ }
+
delete pitData;
// If we're repartitioning then we need to flash the PIT file first.
@@ -477,14 +469,26 @@ bool attemptFlash(BridgeManager *bridgeManager, map<string, FILE *> argumentFile
{
if (!flashFile(bridgeManager, it->first, it->second.partitionName.c_str(), it->second.file))
return (false);
+
+ break;
}
}
}
- // Flash all other files
+ // Flash partitions not involved in the boot process second.
for (map<unsigned int, PartitionNameFilePair>::iterator it = partitionFileMap.begin(); it != partitionFileMap.end(); it++)
{
- if (it->second.file != localPitFile)
+ if (!isKnownPartition(it->second.partitionName.c_str(), kKnownPartitionPit) && !isKnownBootPartition(it->second.partitionName.c_str()))
+ {
+ if (!flashFile(bridgeManager, it->first, it->second.partitionName.c_str(), it->second.file))
+ return (false);
+ }
+ }
+
+ // Flash boot partitions last.
+ for (map<unsigned int, PartitionNameFilePair>::iterator it = partitionFileMap.begin(); it != partitionFileMap.end(); it++)
+ {
+ if (isKnownBootPartition(it->second.partitionName.c_str()))
{
if (!flashFile(bridgeManager, it->first, it->second.partitionName.c_str(), it->second.file))
return (false);
@@ -499,7 +503,7 @@ int main(int argc, char **argv)
map<string, string> argumentMap;
int actionIndex;
- if (!InterfaceManager::GetArguments(argc, argv, argumentMap, &actionIndex))
+ if (!Interface::GetArguments(argc, argv, argumentMap, &actionIndex))
{
Sleep(250);
return (0);
@@ -507,83 +511,95 @@ int main(int argc, char **argv)
initialiseKnownPartitionNames();
- if (actionIndex == InterfaceManager::kActionHelp)
- {
- InterfaceManager::Print(InterfaceManager::usage);
- return (0);
- }
- else if (actionIndex == InterfaceManager::kActionFlash)
+ switch (actionIndex)
{
- if (argumentMap.find(InterfaceManager::flashArgumentNames[InterfaceManager::kFlashArgRepartition]) != argumentMap.end()
- && argumentMap.find(InterfaceManager::flashArgumentNames[InterfaceManager::kFlashArgPit]) == argumentMap.end())
- {
- InterfaceManager::Print("If you wish to repartition then a PIT file must be specified.\n");
- return (0);
- }
+ case Interface::kActionFlash:
+ if (argumentMap.find(Interface::actions[Interface::kActionFlash].valuelessArguments[Interface::kFlashValuelessArgRepartition]) != argumentMap.end()
+ && argumentMap.find(Interface::actions[Interface::kActionFlash].valueArguments[Interface::kFlashValueArgPit]) == argumentMap.end())
+ {
+ Interface::Print("If you wish to repartition then a PIT file must be specified.\n");
+ return (0);
+ }
- if (argumentMap.find(InterfaceManager::flashArgumentNames[InterfaceManager::kFlashArgPit]) != argumentMap.end()
- && argumentMap.find(InterfaceManager::flashArgumentNames[InterfaceManager::kFlashArgRepartition]) == argumentMap.end())
- {
- InterfaceManager::Print("A PIT file should only be used when repartitioning.\n");
- return (0);
- }
- }
- else if (actionIndex == InterfaceManager::kActionDump)
- {
- if (argumentMap.find(InterfaceManager::dumpArgumentNames[InterfaceManager::kDumpArgOutput]) == argumentMap.end())
- {
- InterfaceManager::Print("Output file not specified.\n\n");
- InterfaceManager::Print(InterfaceManager::usage);
- return (0);
- }
+ if (argumentMap.find(Interface::actions[Interface::kActionFlash].valueArguments[Interface::kFlashValueArgPit]) != argumentMap.end()
+ && argumentMap.find(Interface::actions[Interface::kActionFlash].valuelessArguments[Interface::kFlashValuelessArgRepartition]) == argumentMap.end())
+ {
+ Interface::Print("A PIT file should only be used when repartitioning.\n");
+ return (0);
+ }
- if (argumentMap.find(InterfaceManager::dumpArgumentNames[InterfaceManager::kDumpArgChipType]) == argumentMap.end())
- {
- InterfaceManager::Print("You must specify a chip type.\n\n");
- InterfaceManager::Print(InterfaceManager::usage);
- return (0);
- }
+ break;
- string chipType = argumentMap.find(InterfaceManager::dumpArgumentNames[InterfaceManager::kDumpArgChipType])->second;
- if (!(chipType == "RAM" || chipType == "ram" || chipType == "NAND" || chipType == "nand"))
+ case Interface::kActionDump:
{
- InterfaceManager::Print("Unknown chip type: %s.\n\n", chipType.c_str());
- InterfaceManager::Print(InterfaceManager::usage);
- return (0);
+ if (argumentMap.find(Interface::actions[Interface::kActionDump].valueArguments[Interface::kDumpValueArgOutput]) == argumentMap.end())
+ {
+ Interface::Print("Output file not specified.\n\n");
+ Interface::PrintUsage();
+ return (0);
+ }
+
+ if (argumentMap.find(Interface::actions[Interface::kActionDump].valueArguments[Interface::kDumpValueArgChipType]) == argumentMap.end())
+ {
+ Interface::Print("You must specify a chip type.\n\n");
+ Interface::PrintUsage();
+ return (0);
+ }
+
+ string chipType = argumentMap.find(Interface::actions[Interface::kActionDump].valueArguments[Interface::kDumpValueArgChipType])->second;
+ if (!(chipType == "RAM" || chipType == "ram" || chipType == "NAND" || chipType == "nand"))
+ {
+ Interface::Print("Unknown chip type: %s.\n\n", chipType.c_str());
+ Interface::PrintUsage();
+ return (0);
+ }
+
+ if (argumentMap.find(Interface::actions[Interface::kActionDump].valueArguments[Interface::kDumpValueArgChipId]) == argumentMap.end())
+ {
+ Interface::Print("You must specify a Chip ID.\n\n");
+ Interface::PrintUsage();
+ return (0);
+ }
+
+ int chipId = atoi(argumentMap.find(Interface::actions[Interface::kActionDump].valueArguments[Interface::kDumpValueArgChipId])->second.c_str());
+ if (chipId < 0)
+ {
+ Interface::Print("Chip ID must be a non-negative integer.\n");
+ return (0);
+ }
+
+ break;
}
- if (argumentMap.find(InterfaceManager::dumpArgumentNames[InterfaceManager::kDumpArgChipId]) == argumentMap.end())
- {
- InterfaceManager::Print("You must specify a Chip ID.\n\n");
- InterfaceManager::Print(InterfaceManager::usage);
+ case Interface::kActionVersion:
+ Interface::PrintVersion();
return (0);
- }
- int chipId = atoi(argumentMap.find(InterfaceManager::dumpArgumentNames[InterfaceManager::kDumpArgChipId])->second.c_str());
- if (chipId < 0)
- {
- InterfaceManager::Print("Chip ID must be a non-negative integer.\n");
+ case Interface::kActionHelp:
+ Interface::PrintUsage();
return (0);
- }
}
- InterfaceManager::Print("\nHeimdall v1.2.0, Copyright (c) 2010-2011, Benjamin Dobell, Glass Echidna\n");
- InterfaceManager::Print("http://www.glassechidna.com.au\n\n");
- InterfaceManager::Print("This software is provided free of charge. Copying and redistribution is\nencouraged.\n\n");
- InterfaceManager::Print("If you appreciate this software and you would like to support future\ndevelopment please consider donating:\n");
- InterfaceManager::Print("http://www.glassechidna.com.au/donate/\n\n");
-
- Sleep(1000);
-
- bool verbose = argumentMap.find(InterfaceManager::commonArgumentNames[InterfaceManager::kCommonArgVerbose]) != argumentMap.end();
- bool noReboot = argumentMap.find(InterfaceManager::commonArgumentNames[InterfaceManager::kCommonArgNoReboot]) != argumentMap.end();
+ bool verbose = argumentMap.find(Interface::commonValuelessArguments[Interface::kCommonValuelessArgVerbose]) != argumentMap.end();
+ bool reboot = argumentMap.find(Interface::commonValuelessArguments[Interface::kCommonValuelessArgNoReboot]) == argumentMap.end();
int communicationDelay = BridgeManager::kCommunicationDelayDefault;
- if (argumentMap.find(InterfaceManager::commonArgumentNames[InterfaceManager::kCommonArgDelay]) != argumentMap.end())
- communicationDelay = atoi(argumentMap.find(InterfaceManager::commonArgumentNames[InterfaceManager::kCommonArgDelay])->second.c_str());
+ if (argumentMap.find(Interface::commonValueArguments[Interface::kCommonValueArgDelay]) != argumentMap.end())
+ communicationDelay = atoi(argumentMap.find(Interface::commonValueArguments[Interface::kCommonValueArgDelay])->second.c_str());
BridgeManager *bridgeManager = new BridgeManager(verbose, communicationDelay);
+ if (actionIndex == Interface::kActionDetect)
+ {
+ bridgeManager->DetectDevice();
+
+ delete bridgeManager;
+ return (0);
+ }
+
+ Interface::PrintReleaseInfo();
+ Sleep(1000);
+
if (!bridgeManager->Initialise())
{
delete bridgeManager;
@@ -594,7 +610,7 @@ int main(int argc, char **argv)
switch (actionIndex)
{
- case InterfaceManager::kActionFlash:
+ case Interface::kActionFlash:
{
map<string, FILE *> argumentFileMap;
@@ -615,20 +631,17 @@ int main(int argc, char **argv)
return (-1);
}
- bool repartition = argumentMap.find(InterfaceManager::flashArgumentNames[InterfaceManager::kFlashArgRepartition]) != argumentMap.end();
+ bool repartition = argumentMap.find(Interface::actions[Interface::kActionFlash].valuelessArguments[Interface::kFlashValuelessArgRepartition]) != argumentMap.end();
success = attemptFlash(bridgeManager, argumentFileMap, repartition);
- if (noReboot)
- success = bridgeManager->EndSession() && success;
- else
- success = bridgeManager->EndSession() && bridgeManager->RebootDevice() && success;
+ success = bridgeManager->EndSession(reboot) && success;
closeFiles(argumentFileMap);
break;
}
- case InterfaceManager::kActionClosePcScreen:
+ case Interface::kActionClosePcScreen:
{
if (!bridgeManager->BeginSession())
{
@@ -636,37 +649,34 @@ int main(int argc, char **argv)
return (-1);
}
- InterfaceManager::Print("Attempting to close connect to pc screen...\n");
+ Interface::Print("Attempting to close connect to pc screen...\n");
- if (noReboot)
- success = bridgeManager->EndSession();
- else
- success = bridgeManager->EndSession() && bridgeManager->RebootDevice();
+ success = bridgeManager->EndSession(reboot);
if (success)
- InterfaceManager::Print("Attempt complete\n");
+ Interface::Print("Attempt complete\n");
break;
}
- case InterfaceManager::kActionDump:
+ case Interface::kActionDump:
{
- const char *outputFilename = argumentMap.find(InterfaceManager::dumpArgumentNames[InterfaceManager::kDumpArgOutput])->second.c_str();
+ const char *outputFilename = argumentMap.find(Interface::actions[Interface::kActionDump].valueArguments[Interface::kDumpValueArgOutput])->second.c_str();
FILE *dumpFile = fopen(outputFilename, "wb");
if (!dumpFile)
{
- InterfaceManager::PrintError("Failed to open file \"%s\"\n", outputFilename);
+ Interface::PrintError("Failed to open file \"%s\"\n", outputFilename);
delete bridgeManager;
return (-1);
}
int chipType = 0;
- string chipTypeName = argumentMap.find(InterfaceManager::dumpArgumentNames[InterfaceManager::kDumpArgChipType])->second;
+ string chipTypeName = argumentMap.find(Interface::actions[Interface::kActionDump].valueArguments[Interface::kDumpValueArgChipType])->second;
if (chipTypeName == "NAND" || chipTypeName == "nand")
chipType = 1;
- int chipId = atoi(argumentMap.find(InterfaceManager::dumpArgumentNames[InterfaceManager::kDumpArgChipId])->second.c_str());
+ int chipId = atoi(argumentMap.find(Interface::actions[Interface::kActionDump].valueArguments[Interface::kDumpValueArgChipId])->second.c_str());
if (!bridgeManager->BeginSession())
{
@@ -680,15 +690,12 @@ int main(int argc, char **argv)
fclose(dumpFile);
- if (noReboot)
- success = bridgeManager->EndSession() && success;
- else
- success = bridgeManager->EndSession() && bridgeManager->RebootDevice() && success;
+ success = bridgeManager->EndSession(reboot) && success;
break;
}
- case InterfaceManager::kActionPrintPit:
+ case Interface::kActionPrintPit:
{
if (!bridgeManager->BeginSession())
{
@@ -700,11 +707,7 @@ int main(int argc, char **argv)
if (downloadPitFile(bridgeManager, &devicePit) < -1)
{
- if (!bridgeManager->EndSession())
- return (-1);
-
- if (!noReboot)
- bridgeManager->RebootDevice();
+ bridgeManager->EndSession(reboot);
delete bridgeManager;
return (-1);
@@ -714,21 +717,18 @@ int main(int argc, char **argv)
if (pitData->Unpack(devicePit))
{
- pitData->Print();
+ Interface::PrintPit(pitData);
success = true;
}
else
{
- InterfaceManager::PrintError("Failed to unpack device's PIT file!\n");
+ Interface::PrintError("Failed to unpack device's PIT file!\n");
success = false;
}
delete pitData;
- if (noReboot)
- success = bridgeManager->EndSession() && success;
- else
- success = bridgeManager->EndSession() && bridgeManager->RebootDevice() && success;
+ success = bridgeManager->EndSession(reboot) && success;
break;
}
diff --git a/heimdall/source/PitData.cpp b/libpit/Source/libpit.cpp
index 10e88b7..030a80b 100755
--- a/heimdall/source/PitData.cpp
+++ b/libpit/Source/libpit.cpp
@@ -18,12 +18,10 @@
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.*/
-// Heimdall
-#include "Heimdall.h"
-#include "InterfaceManager.h"
-#include "PitData.h"
+// libpit
+#include "libpit.h"
-using namespace Heimdall;
+using namespace libpit;
PitEntry::PitEntry()
{
@@ -31,11 +29,11 @@ PitEntry::PitEntry()
partitionType = 0;
partitionIdentifier = 0;
partitionFlags = 0;
- unknown2 = 0;
+ unknown1 = 0;
partitionBlockSize = 0;
partitionBlockCount = 0;
+ unknown2 = 0;
unknown3 = 0;
- unknown4 = 0;
memset(partitionName, 0, 32);
memset(filename, 0, 64);
@@ -45,42 +43,6 @@ PitEntry::~PitEntry()
{
}
-void PitEntry::Print(void) const
-{
- InterfaceManager::Print("Unused: %s\n", (unused) ? "Yes" : "No");
-
- const char *partitionTypeText = "Unknown";
-
- if (partitionType == PitEntry::kPartitionTypeRfs)
- partitionTypeText = "RFS";
- else if (partitionType == PitEntry::kPartitionTypeExt4)
- partitionTypeText = "EXT4";
-
- InterfaceManager::Print("Partition Type: %d (%s)\n", partitionType, partitionTypeText);
-
- InterfaceManager::Print("Partition Identifier: %d\n", partitionIdentifier);
-
- InterfaceManager::Print("Partition Flags: %d (", partitionFlags);
-
- if (partitionFlags & PitEntry::kPartitionFlagWrite)
- InterfaceManager::Print("R/W");
- else
- InterfaceManager::Print("R");
-
- InterfaceManager::Print(")\n");
-
- InterfaceManager::Print("Unknown 2: %d\n", unknown2);
-
- InterfaceManager::Print("Partition Block Size: %d\n", partitionBlockSize);
- InterfaceManager::Print("Partition Block Count: %d\n", partitionBlockCount);
-
- InterfaceManager::Print("Unknown 3: %d\n", unknown3);
- InterfaceManager::Print("Unknown 4: %d\n", unknown4);
-
- InterfaceManager::Print("Partition Name: %s\n", partitionName);
- InterfaceManager::Print("Filename: %s\n", filename);
-}
-
PitData::PitData()
@@ -153,7 +115,7 @@ bool PitData::Unpack(const unsigned char *data)
entries[i]->SetPartitionFlags(integerValue);
integerValue = PitData::UnpackInteger(data, entryOffset + 16);
- entries[i]->SetUnknown2(integerValue);
+ entries[i]->SetUnknown1(integerValue);
integerValue = PitData::UnpackInteger(data, entryOffset + 20);
entries[i]->SetPartitionBlockSize(integerValue);
@@ -162,10 +124,10 @@ bool PitData::Unpack(const unsigned char *data)
entries[i]->SetPartitionBlockCount(integerValue);
integerValue = PitData::UnpackInteger(data, entryOffset + 28);
- entries[i]->SetUnknown3(integerValue);
+ entries[i]->SetUnknown2(integerValue);
integerValue = PitData::UnpackInteger(data, entryOffset + 32);
- entries[i]->SetUnknown4(integerValue);
+ entries[i]->SetUnknown3(integerValue);
entries[i]->SetPartitionName((const char *)data + entryOffset + 36);
entries[i]->SetFilename((const char *)data + entryOffset + 36 + PitEntry::kPartitionNameMaxLength);
@@ -204,24 +166,56 @@ void PitData::Pack(unsigned char *data) const
PitData::PackInteger(data, entryOffset + 8, entries[i]->GetPartitionIdentifier());
PitData::PackInteger(data, entryOffset + 12, entries[i]->GetPartitionFlags());
- PitData::PackInteger(data, entryOffset + 16, entries[i]->GetUnknown2());
+ PitData::PackInteger(data, entryOffset + 16, entries[i]->GetUnknown1());
PitData::PackInteger(data, entryOffset + 20, entries[i]->GetPartitionBlockSize());
PitData::PackInteger(data, entryOffset + 24, entries[i]->GetPartitionBlockCount());
- PitData::PackInteger(data, entryOffset + 28, entries[i]->GetUnknown3());
- PitData::PackInteger(data, entryOffset + 32, entries[i]->GetUnknown4());
+ PitData::PackInteger(data, entryOffset + 28, entries[i]->GetUnknown2());
+ PitData::PackInteger(data, entryOffset + 32, entries[i]->GetUnknown3());
memcpy(data + entryOffset + 36, entries[i]->GetPartitionName(), PitEntry::kPartitionNameMaxLength);
memcpy(data + entryOffset + 36 + PitEntry::kPartitionNameMaxLength, entries[i]->GetPartitionName(), PitEntry::kFilenameMaxLength);
}
}
+void PitData::Clear(void)
+{
+ entryCount = 0;
+
+ unknown1 = 0;
+ unknown2 = 0;
+
+ unknown3 = 0;
+ unknown4 = 0;
+
+ unknown5 = 0;
+ unknown6 = 0;
+
+ unknown7 = 0;
+ unknown8 = 0;
+
+ for (unsigned int i = 0; i < entries.size(); i++)
+ delete entries[i];
+
+ entries.clear();
+}
+
+PitEntry *PitData::GetEntry(unsigned int index)
+{
+ return (entries[index]);
+}
+
+const PitEntry *PitData::GetEntry(unsigned int index) const
+{
+ return (entries[index]);
+}
+
PitEntry *PitData::FindEntry(const char *partitionName)
{
for (unsigned int i = 0; i < entries.size(); i++)
{
- if (strcmp(entries[i]->GetPartitionName(), partitionName) == 0)
+ if (!entries[i]->GetUnused() && strcmp(entries[i]->GetPartitionName(), partitionName) == 0)
return (entries[i]);
}
@@ -232,7 +226,7 @@ const PitEntry *PitData::FindEntry(const char *partitionName) const
{
for (unsigned int i = 0; i < entries.size(); i++)
{
- if (strcmp(entries[i]->GetPartitionName(), partitionName) == 0)
+ if (!entries[i]->GetUnused() && strcmp(entries[i]->GetPartitionName(), partitionName) == 0)
return (entries[i]);
}
@@ -243,7 +237,7 @@ PitEntry *PitData::FindEntry(unsigned int partitionIdentifier)
{
for (unsigned int i = 0; i < entries.size(); i++)
{
- if (entries[i]->GetPartitionIdentifier() == partitionIdentifier)
+ if (!entries[i]->GetUnused() && entries[i]->GetPartitionIdentifier() == partitionIdentifier)
return (entries[i]);
}
@@ -254,31 +248,9 @@ const PitEntry *PitData::FindEntry(unsigned int partitionIdentifier) const
{
for (unsigned int i = 0; i < entries.size(); i++)
{
- if (entries[i]->GetPartitionIdentifier() == partitionIdentifier)
+ if (!entries[i]->GetUnused() && entries[i]->GetPartitionIdentifier() == partitionIdentifier)
return (entries[i]);
}
return (nullptr);
}
-
-void PitData::Print(void) const
-{
- InterfaceManager::Print("Entry Count: %d\n", entryCount);
-
- InterfaceManager::Print("Unknown 1: %d\n", unknown1);
- InterfaceManager::Print("Unknown 2: %d\n", unknown2);
- InterfaceManager::Print("Unknown 3: %d\n", unknown3);
- InterfaceManager::Print("Unknown 4: %d\n", unknown4);
- InterfaceManager::Print("Unknown 5: %d\n", unknown5);
- InterfaceManager::Print("Unknown 6: %d\n", unknown6);
- InterfaceManager::Print("Unknown 7: %d\n", unknown7);
- InterfaceManager::Print("Unknown 8: %d\n", unknown8);
-
- for (unsigned int i = 0; i < entryCount; i++)
- {
- InterfaceManager::Print("\n\n--- Entry #%d ---\n", i);
- entries[i]->Print();
- }
-
- InterfaceManager::Print("\n");
-}
diff --git a/heimdall/source/PitData.h b/libpit/Source/libpit.h
index b6a0d2f..636f1e1 100755
--- a/heimdall/source/PitData.h
+++ b/libpit/Source/libpit.h
@@ -18,14 +18,14 @@
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.*/
-#ifndef PITDATA_H
-#define PITDATA_H
+#ifndef LIBPIT_H
+#define LIBPIT_H
// C Standard Library
#include <string.h>
#include <vector>
-namespace Heimdall
+namespace libpit
{
class PitEntry
{
@@ -58,13 +58,13 @@ namespace Heimdall
unsigned int partitionIdentifier;
unsigned int partitionFlags;
- unsigned int unknown2;
+ unsigned int unknown1;
unsigned int partitionBlockSize;
unsigned int partitionBlockCount;
+ unsigned int unknown2;
unsigned int unknown3;
- unsigned int unknown4;
char partitionName[kPartitionNameMaxLength];
char filename[kFilenameMaxLength];
@@ -74,8 +74,6 @@ namespace Heimdall
PitEntry();
~PitEntry();
- void Print(void) const;
-
bool GetUnused(void) const
{
return unused;
@@ -116,14 +114,14 @@ namespace Heimdall
this->partitionFlags = partitionFlags;
}
- unsigned int GetUnknown2(void) const
+ unsigned int GetUnknown1(void) const
{
- return unknown2;
+ return unknown1;
}
- void SetUnknown2(unsigned int unknown2)
+ void SetUnknown1(unsigned int unknown1)
{
- this->unknown2 = unknown2;
+ this->unknown1 = unknown1;
}
unsigned int GetPartitionBlockSize(void) const
@@ -146,24 +144,24 @@ namespace Heimdall
this->partitionBlockCount = partitionBlockCount;
}
- unsigned int GetUnknown3(void) const
+ unsigned int GetUnknown2(void) const
{
- return unknown3;
+ return unknown2;
}
- void SetUnknown3(unsigned int unknown3)
+ void SetUnknown2(unsigned int unknown2)
{
- this->unknown3 = unknown3;
+ this->unknown2 = unknown2;
}
- unsigned int GetUnknown4(void) const
+ unsigned int GetUnknown3(void) const
{
- return unknown4;
+ return unknown3;
}
- void SetUnknown4(unsigned int unknown4)
+ void SetUnknown3(unsigned int unknown3)
{
- this->unknown4 = unknown4;
+ this->unknown3 = unknown3;
}
const char *GetPartitionName(void) const
@@ -287,14 +285,17 @@ namespace Heimdall
bool Unpack(const unsigned char *data);
void Pack(unsigned char *data) const;
+ void Clear(void);
+
+ PitEntry *GetEntry(unsigned int index);
+ const PitEntry *GetEntry(unsigned int index) const;
+
PitEntry *FindEntry(const char *partitionName);
const PitEntry *FindEntry(const char *partitionName) const;
PitEntry *FindEntry(unsigned int partitionIdentifier);
const PitEntry *FindEntry(unsigned int partitionIdentifier) const;
- void Print(void) const;
-
unsigned int GetEntryCount(void) const
{
return entryCount;
diff --git a/libpit/libpit.vcxproj b/libpit/libpit.vcxproj
new file mode 100755
index 0000000..af828bc
--- /dev/null
+++ b/libpit/libpit.vcxproj
@@ -0,0 +1,119 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release - Static MSVC|Win32">
+ <Configuration>Release - Static MSVC</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="Source\libpit.cpp" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="Source\libpit.h" />
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{9506FFE4-3A78-4BEE-A15E-62C5A138E61D}</ProjectGuid>
+ <Keyword>Win32Proj</Keyword>
+ <RootNamespace>libpit</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseDebugLibraries>true</UseDebugLibraries>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseDebugLibraries>false</UseDebugLibraries>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseDebugLibraries>false</UseDebugLibraries>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <OutDir>$(SolutionDir)$(Platform)\$(Configuration)\lib\</OutDir>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <OutDir>$(SolutionDir)$(Platform)\$(Configuration)\lib\</OutDir>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">
+ <OutDir>$(SolutionDir)$(Platform)\$(Configuration)\lib\</OutDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <WarningLevel>Level3</WarningLevel>
+ <Optimization>Disabled</Optimization>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ </ClCompile>
+ <Link>
+ <SubSystem>Windows</SubSystem>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <WarningLevel>Level3</WarningLevel>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <Optimization>MaxSpeed</Optimization>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <IntrinsicFunctions>true</IntrinsicFunctions>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ </ClCompile>
+ <Link>
+ <SubSystem>Windows</SubSystem>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <OptimizeReferences>true</OptimizeReferences>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release - Static MSVC|Win32'">
+ <ClCompile>
+ <WarningLevel>Level3</WarningLevel>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <Optimization>MaxSpeed</Optimization>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <IntrinsicFunctions>true</IntrinsicFunctions>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ </ClCompile>
+ <Link>
+ <SubSystem>Windows</SubSystem>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <OptimizeReferences>true</OptimizeReferences>
+ </Link>
+ </ItemDefinitionGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project> \ No newline at end of file
diff --git a/libpit/libpit.vcxproj.filters b/libpit/libpit.vcxproj.filters
new file mode 100755
index 0000000..c9ea499
--- /dev/null
+++ b/libpit/libpit.vcxproj.filters
@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="Source\libpit.h">
+ <Filter>Source</Filter>
+ </ClInclude>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="Source\libpit.cpp">
+ <Filter>Source</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project> \ No newline at end of file
diff --git a/msvc2010.sln b/msvc2010.sln
index b688da2..f5d5172 100644
--- a/msvc2010.sln
+++ b/msvc2010.sln
@@ -1,18 +1,22 @@

Microsoft Visual Studio Solution File, Format Version 11.00
-# Visual C++ Express 2010
+# Visual Studio 2010
Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "heimdall-frontend", "heimdall-frontend\heimdall-frontend.vcxproj", "{EAD352DF-7CDE-478C-8D70-B0E42A951DEF}"
ProjectSection(ProjectDependencies) = postProject
{DC0D782C-8DB7-44CA-A984-D3A97483E0D0} = {DC0D782C-8DB7-44CA-A984-D3A97483E0D0}
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D} = {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}
EndProjectSection
EndProject
Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "heimdall", "heimdall\heimdall.vcxproj", "{DC0D782C-8DB7-44CA-A984-D3A97483E0D0}"
ProjectSection(ProjectDependencies) = postProject
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D} = {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}
{349EE8F9-7D25-4909-AAF5-FF3FADE72187} = {349EE8F9-7D25-4909-AAF5-FF3FADE72187}
EndProjectSection
EndProject
Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (static)", "libusb-1.0\_libusb_static_2010.vcxproj", "{349EE8F9-7D25-4909-AAF5-FF3FADE72187}"
EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libpit", "libpit\libpit.vcxproj", "{9506FFE4-3A78-4BEE-A15E-62C5A138E61D}"
+EndProject
Global
GlobalSection(SolutionConfigurationPlatforms) = preSolution
Debug|Win32 = Debug|Win32
@@ -53,6 +57,15 @@ Global
{349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.Build.0 = Release|Win32
{349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.ActiveCfg = Release|x64
{349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.Build.0 = Release|x64
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Debug|Win32.ActiveCfg = Debug|Win32
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Debug|Win32.Build.0 = Debug|Win32
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Debug|x64.ActiveCfg = Debug|Win32
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Release - Static MSVC|Win32.ActiveCfg = Release - Static MSVC|Win32
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Release - Static MSVC|Win32.Build.0 = Release - Static MSVC|Win32
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Release - Static MSVC|x64.ActiveCfg = Release|Win32
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Release|Win32.ActiveCfg = Release|Win32
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Release|Win32.Build.0 = Release|Win32
+ {9506FFE4-3A78-4BEE-A15E-62C5A138E61D}.Release|x64.ActiveCfg = Release|Win32
EndGlobalSection
GlobalSection(SolutionProperties) = preSolution
HideSolutionNode = FALSE