#include <windows.h>
#include "host_def.h"
#include "insignia.h"
/*
* ==========================================================================
* Name: nt_fulsc.c
* Author: Jerry Sexton
* Derived From:
* Created On: 27th January 1992
* Purpose: This module contains the code required to handle
* transitions between graphics and text modes, and
* windowed and full-screen displays for SoftPC running
* under the x86 monitor.
*
* (c)Copyright Insignia Solutions Ltd., 1992. All rights reserved.
* ==========================================================================
*/
/*
* ==========================================================================
* Other Includes
* ==========================================================================
*/
#ifdef X86GFX
#include <ntddvdeo.h>
#endif
#include <vdm.h>
#include <stdlib.h>
#include <string.h>
#include "conapi.h"
#include "xt.h"
#include CpuH
#include "gvi.h"
#include "gmi.h"
#include "gfx_upd.h"
#include "video.h"
#include "egacpu.h"
#include "egavideo.h"
#include "egagraph.h"
#include "egaports.h"
#include "egamode.h"
#include "ckmalloc.h"
#include "sas.h"
#include "ica.h"
#include "ios.h"
#include "config.h"
#include "idetect.h"
#include "debug.h"
#include "nt_thred.h"
#include "nt_fulsc.h"
#include "nt_graph.h"
#include "nt_uis.h"
#include "host_rrr.h"
#include "nt_det.h"
#include "nt_mouse.h"
#include "nt_event.h"
#include "ntcheese.h"
#include "nt_eoi.h"
#include "nt_reset.h"
/*
* ==========================================================================
* Global Data
* ==========================================================================
*/
GLOBAL BOOL ConsoleInitialised = FALSE;
GLOBAL BOOL ConsoleNoUpdates = FALSE;
#ifdef X86GFX
GLOBAL BOOL BiosModeChange = FALSE;
GLOBAL DWORD mouse_buffer_width = 0,
mouse_buffer_height = 0;
#endif /* X86GFX */
GLOBAL BOOL blocked_in_gfx_mode = FALSE; /* need to force text mode? */
#ifndef PROD
GLOBAL UTINY FullScreenDebug = FALSE;
#endif /* PROD */
/* We have to prevent bad values from oddball video cards (eg Prodesigner II
* EISA) from blatting us before we can load our private baby mode table in
* ntio.sys. We have to keep another copy to be copied into memory to prevent
* this. We should only need modes 3 & b.
*/
GLOBAL UTINY tempbabymode[] =
/* 80x25 stuff */
{
0x50, 0x18, 0x10, 0x00, 0x10, 0x00, 0x03, 0x00, 0x02, 0x67,
0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, 0x00, 0x4f,
0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, 0x9c, 0x8e, 0x8f, 0x28,
0x1f, 0x96, 0xb9, 0xa3, 0xff, 0x00, 0x01, 0x02, 0x03, 0x04,
0x05, 0x14, 0x07, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e,
0x3f, 0x0c, 0x00, 0x0f, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00,
0x10, 0x0e, 0x00, 0xff,
/* mode b stuff */
0x5e, 0x32, 0x08, 0x00, 0x97, 0x01, 0x0f, 0x00, 0x06, 0xe7,
0x6d, 0x5d, 0x5e, 0x90, 0x61, 0x8f, 0xbf, 0x1f, 0x00, 0x40,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa2, 0x8e, 0x99, 0x2f,
0x00, 0xa1, 0xb9, 0xe3, 0xff, 0x00, 0x01, 0x02, 0x03, 0x04,
0x05, 0x14, 0x07, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e,
0x3f, 0x01, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x05, 0x0f, 0xff
};
/*
* ==========================================================================
* Local Data
* ==========================================================================
*/
/* The resolution and font-size at start-up. */
LOCAL COORD startUpResolution;
LOCAL COORD startUpFontSize;
/* General purpose console buffer. */
LOCAL CHAR_INFO consoleBuffer[MAX_CONSOLE_SIZE];
LOCAL BOOL WinFrozen = FALSE;
/* Console info from startup which is needed for synchronisation */
LOCAL int ConVGAHeight;
LOCAL int ConTopLine;
/* saved information for console re-integration */
LOCAL CONSOLE_SCREEN_BUFFER_INFO ConsBufferInfo;
LOCAL StartupCharHeight;
LOCAL half_word saved_text_lines; /* No of lines for last SelectMouseBuffer. */
/* Variable to check for changes in screen state. */
GLOBAL DWORD savedScreenState;
BOOL nt_init_called = 0;
IMPORT CONSOLE_CURSOR_INFO StartupCursor;
IMPORT void low_set_mode(int);
IMPORT VOID recalc_text(int);
IMPORT VOID enable_gfx_update_routines(VOID);
IMPORT VOID disable_gfx_update_routines(VOID);
#ifdef X86GFX
IMPORT void vga_misc_inb(io_addr, half_word *);
#endif /* X86GFX */
/*
* ==========================================================================
* Local Function Declarations
* ==========================================================================
*/
VOID enableUpdates(VOID);
VOID disableUpdates(VOID);
VOID copyConsoleToRegen(SHORT, SHORT, SHORT, SHORT);
VOID getVDMCursorPosition(VOID);
VOID setVDMCursorPosition(UTINY, PCOORD);
VOID waitForInputFocus(VOID);
GLOBAL int getModeType(VOID);
#ifdef X86GFX
VOID AddTempIVTFixups(VOID);
VOID GfxReset(VOID);
#endif /* X86GFX */
/*
* ==========================================================================
* Global Functions
* ==========================================================================
*/
GLOBAL VOID nt_init_event_thread(VOID)
{
note_entrance0("nt_init_event_thread");
/*
* May be called more than once, if event thread enters
* resume\block code before normally intialized
*/
if (nt_init_called)
return;
else
nt_init_called++;
if (sc.ScreenState != STREAM_IO) {
/*
** Copy the console buffer to the regen buffer.
** Don't want to adjust the copy from top of console window, console
** does it itself if we resize the window. Tim September 92.
*/
copyConsoleToRegen(0, 0, VGA_WIDTH, (SHORT)ConVGAHeight);
/*
** Tim September 92, adjust cursor position if console window size is
** adjusted.
*/
ConsBufferInfo.dwCursorPosition.Y -= ConTopLine;
/* Set up SoftPC's cursor. */
setVDMCursorPosition((UTINY)StartupCharHeight,
&ConsBufferInfo.dwCursorPosition);
if (sc.ScreenState == WINDOWED)
enableUpdates();
}
else
enableUpdates();
// set kbd state flags in biosdata area, according to the real kbd Leds
if (!VDMForWOW) {
SyncBiosKbdLedToKbdDevice();
// we have sync up the BIOS led states with the system, we now let the
// event thread go
ResumeThread(ThreadInfo.EventMgr.Handle);
}
KbdResume(); // JonLe Mod
}
#ifdef X86GFX
/*
* Find the address of the ROM font, load it up into the correct
* portion of the regen area and set Int 43 to point to it.
*
* Size of font we are loading is known, so don't listen to what
* the native BIOS returns to us in CX. BIOS might be returning
* character height we set in recalc_text() above. Tim Oct 92.
*/
NativeFontAddr nativeFontAddresses[6]; /* pointers to native BIOS ROM fonts */
/* 8x14, 8x8 pt1, 8x8 pt2, 9x14, 8x16 and 9x16 */
#define GET_BIOS_FONT_ADDRESS(FontIndex) \
(((sys_addr)nativeFontAddresses[FontIndex].seg << 4) + \
(sys_addr)nativeFontAddresses[FontIndex].off)
/*
*****************************************************************************
** locateNativeBIOSfonts() X86 only.
*****************************************************************************
** Get the addresses of the BIOS ROM fonts. (Insignia video ROM not loaded)
** ntdetect.com runs the INT 10 to look the addresses up on system boot and
** stores them in page 0 at 700.
** This function is called once on startup X86 only. It gets the addresses of
** the native ROM fonts and stores them in the nativeFontAddresses[] array.
*/
VOID locateNativeBIOSfonts IFN0()
{
int i;
sys_addr font_off = 0x700; /* Magic place used by ntdetect.com */
for(i = 0; i < 6; i++)
{
sas_loadw(font_off, &nativeFontAddresses[i].off);
sas_loadw(font_off+2, &nativeFontAddresses[i].seg);
font_off += 4;
}
} /* end of locateNativeBIOSfonts() */
/*
****************************************************************************
** loadNativeBIOSfont() X86 only.
****************************************************************************
** Loads the appropriate font, specified by current window size, into the
** font area in video RAM.
** This function is called on every windowed startup and resume. *Never* on
** a full-screen startup or resume. The font is loaded so that it will be
** available for full-screen text mode, but easier to load when windowed.
** Remember a mode change will load the corect font.
*/
VOID loadNativeBIOSfont IFN1( int, vgaHeight )
{
sys_addr fontadd; // location of font
UTINY *regenptr; // destination in video
int cellsize; // individual character size
int skip; // gap between characters
int loop, pool;
UINT OutputCP;
/*
** ordered this way as 80x50 console is default
** VGA_HEIGHT_4 = 50
** VGA_HEIGHT_3 = 43
** VGA_HEIGHT_2 = 28
** VGA_HEIGHT_1 = 25
** VGA_HEIGHT_0 = 22
*/
if (vgaHeight == VGA_HEIGHT_4 || vgaHeight == VGA_HEIGHT_3){
cellsize = 8;
fontadd = GET_BIOS_FONT_ADDRESS(F8x8pt1);
}else
if (vgaHeight == VGA_HEIGHT_2){
cellsize = 14;
fontadd = GET_BIOS_FONT_ADDRESS(F8x14);
}else{
cellsize = 16;
fontadd = GET_BIOS_FONT_ADDRESS(F8x16);
}
// set Int 43 to point to font
sas_storew(0x43 * 4, (word)(fontadd & 0xffff));
sas_storew(0x43 * 4 + 2, (word)(fontadd >> 4 & 0xf000));
/* BUGBUG, williamh
We should have set int43 to the new font read from the CPI font.
This would require at least 4KB buffer in real mode address space.
The question is who is going to use this vector? So far, we haven't found
any applications use the vector(ROM BIOS is okay because the set video mode
function will reset the font and our new font will be lost anyway).
*/
if (!sc.Registered || (OutputCP = GetConsoleOutputCP()) == 437 ||
!LoadCPIFont(OutputCP, (WORD)8, (WORD)cellsize)) {
// now load it into the regen memory. We load it in at a0000 where
// an app will have to get to it. Luckily, this means we don't
// conflict with the text on the screen
skip = 32 - cellsize;
regenptr = (half_word *)0xa0000;
if (cellsize == 8) /* 8x8 font comes in two halves */
{
for (loop = 0; loop < 128; loop++)
{
for (pool = 0; pool < cellsize; pool++)
*regenptr++ = *(UTINY *)fontadd++;
regenptr += skip;
}
fontadd = GET_BIOS_FONT_ADDRESS(F8x8pt2);
for (loop = 0; loop < 128; loop++)
{
for (pool = 0; pool < cellsize; pool++)
*regenptr++ = *(UTINY *)fontadd++;
regenptr += skip;
}
}
else
{
for (loop = 0; loop < 256; loop++)
{
for (pool = 0; pool < cellsize; pool++)
*regenptr++ = *(UTINY *)fontadd++;
regenptr += skip;
}
}
}
} /* end of loadNativeBIOSfont() */
/* this function loads font data from EGA.CPI file located at %systemroot%\system32.
It is the same file console server used to load ROM font when the video
is in full screen. This function covers code page 437(ROM default). However,
the caller should make its best decision to call this function if the
output code page is not 437. This function doesn't care what code page
was provided.
The font size are limitted to(an assumption made by nt video driver and
the console server):
** width must be 8 pixels.
** Height must less or equal to 16 pixels.
*/
BOOL LoadCPIFont(UINT CodePageID, WORD FontWidth, WORD FontHeight)
{
BYTE Buffer[16 * 256];
DWORD dw, BytesRead, FilePtr;
BYTE *VramAddr, *pSrc;
DWORD nChars;
PCPIFILEHEADER pCPIFileHeader = (PCPIFILEHEADER)Buffer;
PCPICODEPAGEHEADER pCPICodePageHeader = (PCPICODEPAGEHEADER) Buffer;
PCPICODEPAGEENTRY pCPICodePageEntry = (PCPICODEPAGEENTRY) Buffer;
PCPIFONTHEADER pCPIFontHeader = (PCPIFONTHEADER) Buffer;
PCPIFONTDATA pCPIFontData = (PCPIFONTDATA) Buffer;
BOOL bDOSCPI = FALSE;
HANDLE hCPIFile;
/* max font height is 16 pixels and font width must be 8 pixels */
if (FontHeight > 16 || FontWidth != 8)
return FALSE;
dw = GetSystemDirectoryA((CHAR *)Buffer, sizeof(Buffer));
if (dw == 0 || dw + CPI_FILENAME_LENGTH > sizeof(Buffer))
return FALSE;
RtlMoveMemory(&Buffer[dw], CPI_FILENAME, CPI_FILENAME_LENGTH);
// the file must be opened in READONLY mode or the CreateFileA will fail
// because the console sevrer always keeps an opened handle to the file
// and the file is opened READONLY.
hCPIFile = CreateFileA(Buffer, GENERIC_READ, FILE_SHARE_READ,
NULL, OPEN_EXISTING, 0, NULL);
if (hCPIFile == INVALID_HANDLE_VALUE)
return FALSE;
if (!ReadFile(hCPIFile, Buffer, sizeof(CPIFILEHEADER), &BytesRead, NULL) ||
BytesRead != sizeof(CPIFILEHEADER)) {
CloseHandle(hCPIFile);
return FALSE;
}
if (memcmp(pCPIFileHeader->Signature, CPI_SIGNATURE_NT, CPI_SIGNATURE_LENGTH))
{
if (memcmp(pCPIFileHeader->Signature, CPI_SIGNATURE_DOS,CPI_SIGNATURE_LENGTH))
{
CloseHandle(hCPIFile);
return FALSE;
}
else
bDOSCPI = TRUE;
}
// move the file pointer to the code page table header
FilePtr = pCPIFileHeader->OffsetToCodePageHeader;
if (SetFilePointer(hCPIFile, FilePtr, NULL, FILE_BEGIN) == (DWORD) -1){
CloseHandle(hCPIFile);
return FALSE;
}
if (!ReadFile(hCPIFile, Buffer, sizeof(CPICODEPAGEHEADER), &BytesRead, NULL) ||
BytesRead != sizeof(CPICODEPAGEHEADER)) {
CloseHandle(hCPIFile);
return FALSE;
}
// how many code page entries in the file
dw = pCPICodePageHeader->NumberOfCodePages;
FilePtr += BytesRead;
// serach for the specific code page
while (dw > 0 &&
ReadFile(hCPIFile, Buffer, sizeof(CPICODEPAGEENTRY), &BytesRead, NULL) &&
BytesRead == sizeof(CPICODEPAGEENTRY)) {
if (pCPICodePageEntry->CodePageID == CodePageID)
break;
if (dw > 1) {
if (!bDOSCPI)
FilePtr += pCPICodePageEntry->OffsetToNextCodePageEntry;
else
FilePtr = pCPICodePageEntry->OffsetToNextCodePageEntry;
if (SetFilePointer(hCPIFile, FilePtr, NULL, FILE_BEGIN) == (DWORD) -1) {
CloseHandle(hCPIFile);
return FALSE;
}
}
dw--;
}
if (dw == 0) {
CloseHandle(hCPIFile);
return FALSE;
}
// seek to the font header for the code page
if (!bDOSCPI)
FilePtr += pCPICodePageEntry->OffsetToFontHeader;
else
FilePtr = pCPICodePageEntry->OffsetToFontHeader;
if (SetFilePointer(hCPIFile, FilePtr, NULL, FILE_BEGIN) == (DWORD) -1) {
CloseHandle(hCPIFile);
return FALSE;
}
if (!ReadFile(hCPIFile, Buffer, sizeof(CPIFONTHEADER), &BytesRead, NULL) ||
BytesRead != sizeof(CPIFONTHEADER)){
CloseHandle(hCPIFile);
return FALSE;
}
// number of fonts with the specific code page
dw = pCPIFontHeader->NumberOfFonts;
while(dw != 0 &&
ReadFile(hCPIFile, Buffer, sizeof(CPIFONTDATA), &BytesRead, NULL) &&
BytesRead == sizeof(CPIFONTDATA))
{
if (pCPIFontData->FontHeight == FontHeight &&
pCPIFontData->FontWidth == FontWidth)
{
nChars = pCPIFontData->NumberOfCharacters;
if (ReadFile(hCPIFile, Buffer, nChars * FontHeight, &BytesRead, NULL) &&
BytesRead == nChars * FontHeight)
break;
else {
CloseHandle(hCPIFile);
return FALSE;
}
}
else {
if (SetFilePointer(hCPIFile,
(DWORD)pCPIFontData->NumberOfCharacters * (DWORD)pCPIFontData->FontHeight,
NULL,
FILE_CURRENT) == (DWORD) -1) {
CloseHandle(hCPIFile);
return FALSE;
}
dw--;
}
}
if (dw != 0) {
VramAddr = (BYTE *)0xa0000;
pSrc = Buffer;
for(dw = nChars; dw > 0; dw--) {
RtlMoveMemory(VramAddr, pSrc, FontHeight);
pSrc += FontHeight;
// font in VRAM is always 32 bytes
VramAddr += 32;
}
return TRUE;
}
return FALSE;
}
#endif /* X86GFX */
/*
***************************************************************************
** calcScreenParams(), setup our screen screen parameters as determined
** by current Console state.
** Called from ConsoleInit() and DoFullScreenResume().
** Returns current character height (8,14,16) and lines (22-50).
** Tim Jan 93, extracted common code from init and resume funx.
***************************************************************************
*/
GLOBAL VOID calcScreenParams IFN2( USHORT *, pCharHeight, USHORT *, pVgaHeight )
{
USHORT consoleWidth,
consoleHeight,
vgaHeight,
charHeight,
scanLines;
half_word temp;
/* Get console information. */
if (!GetConsoleScreenBufferInfo(sc.OutputHandle, &ConsBufferInfo))
ErrorExit();
/* Now sync the SoftPC screen to the console. */
if (sc.ScreenState == WINDOWED)
{
consoleWidth = ConsBufferInfo.srWindow.Right -
ConsBufferInfo.srWindow.Left + 1;
consoleHeight = ConsBufferInfo.srWindow.Bottom -
ConsBufferInfo.srWindow.Top + 1;
}
#ifdef X86GFX
else /* FULLSCREEN */
{
if (!GetConsoleHardwareState(sc.OutputHandle,
&startUpResolution,
&startUpFontSize))
ErrorExit();
consoleWidth = startUpResolution.X / startUpFontSize.X;
consoleHeight = startUpResolution.Y / startUpFontSize.Y;
}
#endif
/*
* Set the display to the nearest VGA text mode size, which is one of
* 80x22, 80x25, 80x28, 80x43 or 80x50.
*/
if (consoleHeight <= MID_VAL(VGA_HEIGHT_0, VGA_HEIGHT_1))
{
/* 22 lines */
vgaHeight = VGA_HEIGHT_0;
scanLines = 351;
charHeight = 16;
}
else if (consoleHeight <= MID_VAL(VGA_HEIGHT_1, VGA_HEIGHT_2))
{
/* 25 lines */
vgaHeight = VGA_HEIGHT_1;
scanLines = 399;
charHeight = 16;
}
else if (consoleHeight <= MID_VAL(VGA_HEIGHT_2, VGA_HEIGHT_3))
{
/* 28 lines */
vgaHeight = VGA_HEIGHT_2;
scanLines = 391;
charHeight = 14;
}
else if (consoleHeight <= MID_VAL(VGA_HEIGHT_3, VGA_HEIGHT_4))
{
/* 43 lines */
vgaHeight = VGA_HEIGHT_3;
scanLines = 349;
charHeight = 8;
}
else
{
/* 50 lines */
vgaHeight = VGA_HEIGHT_4;
scanLines = 399;
charHeight = 8;
}
if (sc.ScreenState == WINDOWED)
{
/* The app may have shutdown in a gfx mode - force text mode back */
if (blocked_in_gfx_mode)
{
low_set_mode(3);
inb(EGA_IPSTAT1_REG,&temp);
outb(EGA_AC_INDEX_DATA, EGA_PALETTE_ENABLE); /* re-enable video */
(*choose_display_mode)();
blocked_in_gfx_mode = FALSE;
}
/*
* Set screen height appropriately for current window size.
* Now call video routine to set the character height, updating the
* BIOS RAM as it does so.
*/
set_screen_height_recal( scanLines ); /* Tim Oct 92 */
recalc_text(charHeight);
/* badly written apps assume 25 line mode page len is 4096 */
if (vgaHeight == 25)
sas_storew_no_check(VID_LEN, 0x1000);
#ifdef X86GFX
loadNativeBIOSfont( vgaHeight );
#endif /* X86GFX */
}
#ifdef X86GFX
else /* FULLSCREEN */
{
// Can't see why we wouldn't want this for resume too.
// set_char_height( startUpFontSize.Y ); /* Tim Oct 92 */
/* clear this condition on fullscreen resume */
blocked_in_gfx_mode = FALSE;
/*
** Adjust height appropriately, Tim September 92.
** In full-screen lines is 21 cos 22x16=352, slightly too big.
*/
if( vgaHeight==22 )
vgaHeight = 21;
charHeight = startUpFontSize.Y;
sas_store_no_check(ega_char_height, (half_word) charHeight);
sas_store_no_check(vd_rows_on_screen, (half_word) (vgaHeight - 1));
/* compatibility with bios 80x25 startup */
if (vgaHeight == 25)
sas_storew_no_check(VID_LEN, 0x1000);
else
sas_storew_no_check(VID_LEN, (word) ((vgaHeight + 1) *
sas_w_at_no_check(VID_COLS) * 2));
}
#endif /* X86GFX */
sas_storew_no_check(VID_COLS, 80); // fixup from 40 char shutdown
*pCharHeight = charHeight;
*pVgaHeight = vgaHeight;
} /* end of calcScreenParams() */
/***************************************************************************
* Function: *
* ConsoleInit *
* *
* Description: *
* Does all the graphics work required on SoftPC start-up. *
* Will split or modify later to accomodate the SCS initialisation *
* that loses the config.sys etc output. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID ConsoleInit(VOID)
{
USHORT charHeight, vgaHeight, cursorLine, topLine;
note_entrance0("ConsoleInit");
#ifdef X86GFX
/* Now GetROMsMapped called from config after sas_init */
/*
* Set emulation to a known state when starting up windowed. This has to
* be done after the ROMS are mapped but before we start to look at
* things like BIOS variables.
*/
GfxReset();
#endif
initTextSection();
/*
* Set up input focus details (we do it here as the fullscreen stuff
* is what is really interested in it).
*/
sc.Focus = TRUE;
sc.FocusEvent = CreateEvent((LPSECURITY_ATTRIBUTES) NULL,
FALSE,
FALSE,
NULL);
#ifdef X86GFX
#ifdef SEPARATE_DETECT_THREAD
/* Create screen state transition detection thread. */
CreateDetectThread();
#endif /* SEPARATE_DETECT_THREAD */
#endif /* X86GFX */
/*
* We don't want to call paint routines until config.sys processed or if
* the monitor is writing directly to the frame buffer (fullscreen), so...
*/
disableUpdates();
/*
** Get console window size and set up our stuff accordingly.
*/
calcScreenParams( &charHeight, &vgaHeight );
StartupCharHeight = charHeight;
#ifdef X86GFX
if( sc.ScreenState != WINDOWED )
{
/*
* Do we need to update the emulation? If we don't do this here then
* a later state dump of the VGA registers to the VGA emulation may
* ignore an equal value of the char height and get_chr_height() will
* be out of step.
*/
if (get_char_height() != startUpFontSize.Y)
{
half_word newht;
outb(EGA_CRTC_INDEX, 9); /* select char ht reg */
inb(EGA_CRTC_DATA, &newht); /* preserve current top 3 bits */
newht = (newht & 0xe0) | (startUpFontSize.Y & 0x1f);
outb(EGA_CRTC_DATA, newht);
}
set_char_height( startUpFontSize.Y ); /* Tim Oct 92 */
/*
* Select a graphics screen buffer so we get mouse coordinates in
* pixels.
*/
//SelectMouseBuffer(); //Tim. moved to nt_std_handle_notification().
/*
* Prevent mode change happening to ensure dummy paint funcs
* are kept. (mode change set from bios mode set up).
*/
set_mode_change_required(FALSE);
}
#endif //X86GFX
/*
* Work out the top line to be displayed in the VGA window, which is line
* zero of the console unless the cursor would not be displayed, in which
* case the window is moved down until the cursor is on the bottom line.
*/
cursorLine = ConsBufferInfo.dwCursorPosition.Y;
if (cursorLine < vgaHeight)
topLine = 0;
else
topLine = cursorLine - vgaHeight + (SHORT) 1;
ConVGAHeight = vgaHeight;
ConTopLine = topLine;
ConsoleInitialised = TRUE;
}
/***************************************************************************
* Function: *
* GfxReset *
* *
* Description: *
* Called from ConsoleInit to program up the vga hardware into some *
* known state. This compensates on the X86 for not initialising via *
* our bios. Essential for windowed running, but probably needed *
* for the what-mode-am-i-in stuff as well. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID GfxReset(VOID)
{
#ifdef X86GFX
half_word temp;
DWORD flags;
/* Check to see if we are currently running windowed or full-screen. */
if (!GetConsoleDisplayMode(&flags))
ErrorExit();
savedScreenState = sc.ScreenState = (flags & CONSOLE_FULLSCREEN_HARDWARE) ?
FULLSCREEN : WINDOWED;
/* Do windowed specific stuff. */
if(sc.ScreenState == WINDOWED)
{
/* Don't need this now cos we use our video BIOS in windowed */
/* Tim August 92: low_set_mode(3); */
/* sas_fillsw(0xb8000, 0x0720, 16000); */
inb(EGA_IPSTAT1_REG,&temp);
outb(EGA_AC_INDEX_DATA, EGA_PALETTE_ENABLE); /* re-enable video */
/* Turn off the VTRACE interrupt, enabled by low_set_mode(3)
this is a dirty hack and must be fixed properly */
ega_int_enable = 0;
}
#endif
}
/***************************************************************************
* Function: *
* ResetConsoleState *
* *
* Description: *
* Attempts to put the console window back to the state in which *
* it started up. *
* *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID ResetConsoleState(VOID)
{
#ifdef X86GFX
/*
* Table of valid hardware states to be passed to
* SetConsoleHardwareState. NOTE: this table is a copy of a static table
* in SrvSetConsoleHardwareState, and so must be updated if that table
* changes.
*/
SAVED HARDWARE_STATE validStates[] =
{
///Now 21{ 22, { 640, 350 }, { 8, 16 } }, /* 80 x 22 mode. */
{ 21, { 640, 350 }, { 8, 16 } }, /* 80 x 21 mode. */
{ 25, { 720, 400 }, { 8, 16 } }, /* 80 x 25 mode. */
{ 28, { 720, 400 }, { 8, 14 } }, /* 80 x 28 mode. */
{ 43, { 640, 350 }, { 8, 8 } }, /* 80 x 43 mode. */
#define MODE_50_INDEX 4
{ 50, { 720, 400 }, { 8, 8 } } /* 80 x 50 mode. */
};
COORD cursorPos;
CONSOLE_SCREEN_BUFFER_INFO bufferInfo;
ULONG i,
j,
videoWidth,
mode,
tableLen;
half_word *from,
*videoLine,
currentPage,
misc;
static COORD screenRes; /* value provided by GetConsHwState() */
static COORD fontSize; /* value provided by GetConsHwState() */
PCHAR_INFO to;
ULONG videoHeight,
nChars;
COORD bufferCoord,
bufferSize;
SMALL_RECT writeRegion;
#endif /* X86GFX */
SMALL_RECT newWin;
BOOL itfailed = FALSE;
#ifdef X86GFX
if (sc.ScreenState == WINDOWED)
{
#endif /* X86GFX */
closeGraphicsBuffer();
if (StreamIoSwitchOn && !host_stream_io_enabled) {
/* restore screen buffer and window size */
SetConsoleScreenBufferSize(sc.OutputHandle, sc.ConsoleBuffInfo.dwSize);
newWin.Top = newWin.Left = 0;
newWin.Bottom = sc.ConsoleBuffInfo.srWindow.Bottom -
sc.ConsoleBuffInfo.srWindow.Top;
newWin.Right = sc.ConsoleBuffInfo.srWindow.Right -
sc.ConsoleBuffInfo.srWindow.Left;
SetConsoleWindowInfo(sc.OutputHandle, TRUE, &newWin);
}
/*
** Tim September 92, don't resize window on way out of DOS app cos
** MS (Sudeep) said so. Don't want to do the associated recalc_text()
** either.
** This keeps the window re-sizing issue nice and simple, but there'll
** be people who don't like having a DOS window size forced upon them.
*/
#if 0
/* Now resize the window to start-up size. */
newWin.Top = newWin.Left = 0;
newWin.Bottom = ConsBufferInfo.srWindow.Bottom -
ConsBufferInfo.srWindow.Top;
newWin.Right = ConsBufferInfo.srWindow.Right -
ConsBufferInfo.srWindow.Left;
if(!SetConsoleWindowInfo(sc.OutputHandle, TRUE, &newWin))
itfailed = TRUE;
if(!SetConsoleScreenBufferSize(sc.OutputHandle,ConsBufferInfo.dwSize))
ErrorExit();
if (itfailed) //try 'it' again...
if(!SetConsoleWindowInfo(sc.OutputHandle, TRUE, &newWin))
ErrorExit();
/*
* Now call video routine to set the character height, updating the
* BIOS RAM as it does so.
*/
recalc_text(StartupCharHeight);
#endif //Zero
#if 0
/* williamh. If we really want to do the following thing,
we have to copy regen to console buffer.
since we are runniing in windowed TEXT mode
the console always has our up-to-date regen
content, the following actually is not necessary
It worked before taking this out it because console
doesn't verify the parameters we passed. No console
has the checking and we are in trouble if we continue
to do so.
*/
/* Clear the undisplayed part of the console buffer. */
bufferSize.X = MAX_CONSOLE_WIDTH;
bufferSize.Y = MAX_CONSOLE_HEIGHT;
videoHeight = (SHORT) (sas_hw_at_no_check(vd_rows_on_screen) + 1);
to = consoleBuffer + bufferSize.X * videoHeight;
nChars = bufferSize.X * ( bufferSize.Y - videoHeight );
while (nChars--)
{
to->Char.AsciiChar = 0x20;
to->Attributes = 7;
to++;
}
bufferCoord.X = 0;
bufferCoord.Y = (SHORT)videoHeight;
writeRegion.Left = 0;
writeRegion.Top = (SHORT)videoHeight;
writeRegion.Right = MAX_CONSOLE_WIDTH-1;
writeRegion.Bottom = bufferSize.Y-1;
if (!WriteConsoleOutput(sc.OutputHandle,
consoleBuffer,
bufferSize,
bufferCoord,
&writeRegion))
ErrorExit();
#endif
/*
** Tim, September 92. Put the Console cursor to the same place as the
** SoftPC cursor. We already do this in full-screen text mode below.
** Specifcally to fix weird cursor position problem with 16-bit nmake,
** but seems like a good safety idea anyway.
*/
getVDMCursorPosition();
doNullRegister(); /* revert console back to ordinary window */
#ifdef X86GFX
}
else /* FULLSCREEN */
{
/*
* If SoftPC blocks in a text mode, sync console srceen buffer to regen
* area.
*/
if (getModeType() == TEXT)
{
/* Get the current screen buffer info. */
if (!GetConsoleScreenBufferInfo(sc.OutputHandle, &bufferInfo))
ErrorExit();
/* Get nearest screen size SetConsoleHardwareState will allow. */
tableLen = sizeof(validStates) / sizeof(HARDWARE_STATE);
for (mode = 0; mode < tableLen; mode++)
if (validStates[mode].LinesOnScreen ==
bufferInfo.srWindow.Bottom - bufferInfo.srWindow.Top + 1)
break;
/* Set it to 50 line mode if we had a funny number of lines. */
if (mode == tableLen)
{
assert0(FALSE,
"Non standard lines on blocking - setting 50 lines");
mode = MODE_50_INDEX;
}
/*
** Tim September 92, if the console hardware state is the same as
** we are about to set it, do not bother setting it.
** This should stop the screen from flashing.
*/
if( !GetConsoleHardwareState(sc.OutputHandle,
&screenRes,
&fontSize) )
assert1( NO,"VDM: GetConsHwState() failed:%#x",GetLastError() );
/* Sync the console to the regen buffer. */
currentPage = sas_hw_at_no_check(vd_current_page);
vga_misc_inb(0x3cc, &misc);
if (misc & 1) // may be mono mode
videoLine = (half_word *) CGA_REGEN_START +
(VIDEO_PAGE_SIZE * currentPage);
else
videoLine = (half_word *) MDA_REGEN_START +
(VIDEO_PAGE_SIZE * currentPage);
to = consoleBuffer;
videoWidth = sas_w_at_no_check(VID_COLS);
videoHeight = (SHORT) (sas_hw_at_no_check(vd_rows_on_screen) + 1);
bufferSize.X = MAX_CONSOLE_WIDTH;
bufferSize.Y = MAX_CONSOLE_HEIGHT;
if (bufferSize.X * bufferSize.Y > MAX_CONSOLE_SIZE)
{
assert1(FALSE, "Buffer size, %d, too large",
bufferSize.X * bufferSize.Y);
ErrorExit();
}
for (i = 0; i < videoHeight; i++)
{
from = videoLine;
for (j = 0; j < videoWidth; j++)
{
to->Char.AsciiChar = *from++;
to->Attributes = *from++;
to++;
}
for (; j < (ULONG)bufferSize.X; j++)
{
to->Char.AsciiChar = 0x20;
to->Attributes = 7;
to++;
}
videoLine += videoWidth * 2;
}
for (; i < (ULONG)bufferSize.Y; i++)
for (j = 0; j < (ULONG)bufferSize.X; j++)
{
to->Char.AsciiChar = 0x20;
to->Attributes = 7;
to++;
}
bufferCoord.X = bufferCoord.Y = 0;
writeRegion.Left = writeRegion.Top = 0;
writeRegion.Right = bufferSize.X - 1;
writeRegion.Bottom = bufferSize.Y - 1;
doNullRegister(); /* revert back to normal console */
if( screenRes.X != validStates[mode].Resolution.X ||
screenRes.Y != validStates[mode].Resolution.Y ||
fontSize.X != validStates[mode].FontSize.X ||
fontSize.Y != validStates[mode].FontSize.Y ||
sas_hw_at_no_check(VID_COLS) == 40 ||
fontSize.Y != sas_hw_at_no_check(ega_char_height))
{
/* Set up the screen. */
if( !SetConsoleHardwareState( sc.OutputHandle,
validStates[mode].Resolution,
validStates[mode].FontSize) ){
/*
** Tim Sept 92, attempt a recovery.
*/
assert1( NO, "VDM: SetConsoleHwState() failed:%#x",
GetLastError() );
}
}
/* put VDM screen onto console screen */
if (!WriteConsoleOutput(sc.OutputHandle,
consoleBuffer,
bufferSize,
bufferCoord,
&writeRegion))
ErrorExit();
#if 0 //STF removed with new mouse stuff??
/*
** Tim, September 92.
** Try this after the WriteConsoleOutput(), can now copy the
** right stuff from video memory to console.
** For mouse purposes we have selected a graphics buffer, so now
** we must reselect the text buffer.
*/
if (!SetConsoleActiveScreenBuffer(sc.OutputHandle))
ErrorExit();
#endif //STF
/*
* Get the cursor position from the BIOS RAM and tell the
* console.
* Set up variables getVDMCursorPosition() needs. Tim Jan 93.
*/
sc.PC_W_Height = screenRes.Y;
sc.CharHeight = fontSize.Y;
getVDMCursorPosition();
}
else /* GRAPHICS */
{
/*
** A tricky issue. If we were just in a full-screen graphics
** mode, we are just about to lose the VGA state and can't get
** it back very easily. So do we pretend we are still in the
** graphics mode or pretend we are in a standard text mode?
** Seems like standard text mode is more sensible. Tim Feb 93.
*/
sas_store_no_check( vd_video_mode, 0x3 );
blocked_in_gfx_mode = TRUE;
#if 0 //STF removed with new mouse stuff??
/*
** Tim, September 92, think we want one of these here too.
** Change to the normal console text buffer.
*/
if (!SetConsoleActiveScreenBuffer(sc.OutputHandle))
ErrorExit();
#endif //STF
/* Get the current screen buffer info. */
if (!GetConsoleScreenBufferInfo(sc.OutputHandle, &bufferInfo))
ErrorExit();
/* Get nearest screen size SetConsoleHardwareState will allow. */
tableLen = sizeof(validStates) / sizeof(HARDWARE_STATE);
for (mode = 0; mode < tableLen; mode++)
if (validStates[mode].LinesOnScreen ==
bufferInfo.srWindow.Bottom - bufferInfo.srWindow.Top + 1)
break;
/* Set it to 50 line mode if we had a funny number of lines. */
if (mode == tableLen)
{
assert0(FALSE,
"Non standard lines on blocking - setting 50 lines");
mode = MODE_50_INDEX;
}
/* Clear the console buffer. */
bufferSize.X = MAX_CONSOLE_WIDTH;
bufferSize.Y = MAX_CONSOLE_HEIGHT;
nChars = bufferSize.X * bufferSize.Y;
if (nChars > MAX_CONSOLE_SIZE)
{
assert1(FALSE, "Buffer size, %d, too large", nChars);
ErrorExit();
}
to = consoleBuffer;
while (nChars--)
{
to->Char.AsciiChar = 0x20;
to->Attributes = 7;
to++;
}
bufferCoord.X = bufferCoord.Y = 0;
writeRegion.Left = writeRegion.Top = 0;
writeRegion.Right = MAX_CONSOLE_WIDTH-1;
writeRegion.Bottom = bufferSize.Y-1;
doNullRegister(); /* revert back to normal console */
if (!WriteConsoleOutput(sc.OutputHandle,
consoleBuffer,
bufferSize,
bufferCoord,
&writeRegion))
ErrorExit();
/* Set the cursor to the top left corner. */
cursorPos.X = 0;
cursorPos.Y = 0;
if (!SetConsoleCursorPosition(sc.OutputHandle, cursorPos))
ErrorExit();
#ifndef PROD
if (sc.ScreenState == WINDOWED) // transient switch??
assert0(NO, "Mismatched screenstate on shutdown");
#endif
/* Set up the screen. */
SetConsoleHardwareState(sc.OutputHandle,
validStates[mode].Resolution,
validStates[mode].FontSize);
}
/*
** Tim September 92, close graphics screen buffer on way out when in
** full-screen.
*/
closeGraphicsBuffer();
}
#endif /* X86GFX */
/*Put console's cursor back to the shape it was on startup.*/
SetConsoleCursorInfo(sc.OutputHandle, &StartupCursor);
/* reset the current_* variables in nt_graph.c */
resetWindowParams();
}
#ifdef X86GFX
/***************************************************************************
* Function: *
* TextToGraphics *
* *
* Description: *
* Handles transitions from text to graphics modes when running *
* windowed. Waits until the window has input focus and then requests *
* a transition to full-screen operation as graphics modes cannot be *
* run in a window. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID TextToGraphics(VOID)
{
DWORD flags;
SAVED COORD scrSize;
/* Freeze until the window receives input focus. */
//if (! sc.Focus ) //awaiting console fix.
if (GetForegroundWindow() != hWndConsole)
{
FreezeWinTitle(); /* Add `-FROZEN' to the console title. */
/* Now wait until input focus is received. */
waitForInputFocus();
UnFreezeWinTitle(); /* Remove frozen message */
}
/*
* We are about to go full-screen but there will be a delay while the
* detection thread does its hand-shaking. So disable screen writes before
* we switch to prevent inadvertent updates while running full-screen.
*/
disableUpdates();
/*
* Sanity Check for stress problem where forced fullscreen after INT 10
* mode change has already started so can apparently go fullscreen twice.
*/
if (!GetConsoleDisplayMode(&flags))
ErrorExit();
/* make sure we haven't been taken back fullscreen */
if ((flags & CONSOLE_FULLSCREEN_HARDWARE) == CONSOLE_FULLSCREEN_HARDWARE)
{
#ifndef PROD
assert0(NO,"NTVDM:rejected fullscreen switch as console already FS");
#endif
return;
}
/* check for iconified FS console. Only under extreme conditions (stress) */
if ((flags & CONSOLE_FULLSCREEN) == CONSOLE_FULLSCREEN)
{
SetForegroundWindow(hWndConsole); /* focus will send us back FS */
}
else /* desktop window */
{
/* The window now has input focus so request to go full-screen. */
BiosModeChange = TRUE;
if (!SetConsoleDisplayMode(sc.OutputHandle,
CONSOLE_FULLSCREEN_MODE,
&scrSize))
{
if (GetLastError() == ERROR_INVALID_PARAMETER)
{
RcErrorDialogBox(ED_INITFSCREEN, NULL, NULL);
}
else
{
ErrorExit();
}
}
BiosModeChange = FALSE;
}
}
/***************************************************************************
* Function: *
* CheckForFullscreenSwitch *
* *
* Description: *
* Checks to see if there has been a transition between windowed and *
* fullscreen and does any console calls necessary. This is called *
* on a timer tick before the graphics tick code. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID CheckForFullscreenSwitch(VOID)
{
half_word mode,
lines;
if (sc.ScreenState == STREAM_IO)
return;
/*
* Do any console calls relating to screen state changes. They have to be
* done now as they cannot be done on the same thread as the screen switch
* hand-shaking.
*/
if (sc.ScreenState != savedScreenState)
{
if (sc.ScreenState == WINDOWED)
{
if (sc.ModeType == TEXT)
{
/* Remove frozen window indicator if necessary. */
UnFreezeWinTitle();
#if 0 //STF removed with new mouse stuff??
/* Revert to text buffer. */
closeGraphicsBuffer(); /* Tim Oct 92 */
#endif //STF
/* Get Window to correct shape */
textResize();
/* Enable screen updates. */
enableUpdates();
/*
* Now get the image on the screen (timer updates currently
* disabled).
*/
(void)(*update_alg.calc_update)();
}
}
else /* FULLSCREEN */
{
int cnt = 0; /* Counter to break out of the cursor off loop. */
/* Disable screen updates*/
disableUpdates();
/* Disable mouse 'attached'ness if enabled */
if (bPointerOff)
{
PointerAttachedWindowed = TRUE;
MouseDisplay();
}
#if 0 //STF removed with new mouse stuff
/* remove any graphics buffer from frozen screen */
closeGraphicsBuffer();
#endif
/* Do mouse scaling */
mode = sas_hw_at_no_check(vd_video_mode);
lines = sas_hw_at_no_check(vd_rows_on_screen) + 1;
SelectMouseBuffer(mode, lines);
/* force mouse */
ica_hw_interrupt(AT_CPU_MOUSE_ADAPTER, AT_CPU_MOUSE_INT, 1);
/*
* Now turn off console cursor - otherwise can ruin screen trying to
* draw system's cursor. The VDM will have to worry about the mouse
* image.
*/
// while(ShowConsoleCursor(sc.OutputHandle, FALSE) >=0 && cnt++ < 200);
} /* FULLSCREEN */
/* Update saved variable. */
savedScreenState = sc.ScreenState;
}
/* Delayed Client Rect query */
if (DelayedReattachMouse)
{
DelayedReattachMouse = FALSE;
MovePointerToWindowCentre();
}
}
/*
***************************************************************************
** getNtScreenState() - return 0 for windowed, 1 for full-screen.
***************************************************************************
** Tim July 92.
*/
GLOBAL UTINY getNtScreenState IFN0()
{
return( (UTINY) sc.ScreenState );
}
/*
***************************************************************************
** hostModeChange() - called from video bios, ega_vide.c:ega_set_mode()
***************************************************************************
**
** When changing to a graphics mode action the transition to full-screen if
** we are currently windowed.
**
** On entry AX should still contain the value when the video BIOS set mode
** function was called.
** Call to TextToGraphics() with parameter indicating whether we want a
** clear screen with the impending host video BIOS mode change.
**
** Return a boolean indicating to the real BIOS whether the mode change
** has occured.
**
** Tim August 92.
*/
GLOBAL BOOL hostModeChange IFN0()
{
half_word vid_mode;
vid_mode = getAL() & 0x7f;
if(getNtScreenState() == WINDOWED)
{
if (vid_mode > 3 && vid_mode != 7)
{
/*
* We have to tell the hand-shaking code the BIOS is causing
* the mode change so that it can do a BIOS mode change when
* the switch has been done. This has to be implemented as a
* global variable because the hand-shaking is on a different
* thread.
*/
TextToGraphics();
// rapid Window to full screen and back cause this to fail,
// remove call since it will get done on the next timer
// event. 28-Feb-1993 Jonle
// SelectMouseBuffer();
return( TRUE );
}
else
return(FALSE);
}
else
return( FALSE );
} /* end hostModeChange() */
#endif /* X86GFX */
/***************************************************************************
* Function: *
* DoFullScreenResume *
* *
* Description: *
* Called by SCS to restart SoftPC when a DOS application restarts *
* after being suspended or starts up for the first time after SoftPC *
* has been booted by another application which has since terminated. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID DoFullScreenResume(VOID)
{
USHORT vgaHeight, height;
#ifndef X86GFX
PVOID pDummy;
#endif
#ifdef X86GFX
DWORD flags;
/*
** Tim July 92.
** Set sc.ScreenState, a windowed/full-screen transition might
** have happenened when SoftPC was inactive.
** Copied from GfxReset().
*/
if( !GetConsoleDisplayMode(&flags) )
ErrorExit();
sc.ScreenState = (flags & CONSOLE_FULLSCREEN_HARDWARE) ? FULLSCREEN : WINDOWED;
/* Put the regen memory in the correct state. */
if (sc.ScreenState != savedScreenState)
{
if (sc.ScreenState == WINDOWED)
{
enableUpdates(); /* Tim September 92, allow graphics ticks */
/*
** Tim Jan 93. Get the next nt_graphics_tick() to decide
** what the current display mode is, set the update and
** paint funx appropriately and redraw the screen.
*/
set_mode_change_required( TRUE );
/* Ensure idling system enabled & reset */
IDLE_ctl(TRUE);
IDLE_init();
}
else
{
disableUpdates(); /* Tim September 92, stop graphics ticks */
/* Ensure idling system disabled as can't detect fullscreen idling*/
IDLE_ctl(FALSE);
}
savedScreenState = sc.ScreenState;
}
/* Select a graphics buffer for the mouse if we are running fullscreen. */
if (sc.ScreenState == FULLSCREEN)
{
//SelectMouseBuffer(); //Tim. moved to nt_std_handle_notification().
/* Lose the regen memory. */
LoseRegenMemory();
}
/*
** Tim July 92:
** set the KEYBOARD.SYS internal variable to 0 for windowed and
** 1 for full-screen.
** If a transition has happened when SoftPC was inactive we
** need to get into the appropriate state.
*/
{
if( sc.ScreenState==WINDOWED ){
sas_store_no_check( (int10_seg<<4)+useHostInt10, WINDOWED );
}else{
sas_store_no_check( (int10_seg<<4)+useHostInt10, FULLSCREEN );
}
}
#endif /* X86GFX */
// re-register with console for fullscreen switching.
if( !RegisterConsoleVDM( VDMForWOW ?
CONSOLE_REGISTER_WOW : CONSOLE_REGISTER_VDM,
#ifdef X86GFX
hStartHardwareEvent,
hEndHardwareEvent,
#else
NULL,
NULL,
#endif
NULL, // sectionname no longer used
0, // sectionname no longer used
&stateLength,
#ifndef X86GFX
&pDummy,
#else
(PVOID *) &videoState,
#endif
NULL, // sectionname no longer used
0, // sectionname no longer used
textBufferSize,
(PVOID *) &textBuffer
)
)
ErrorExit();
#ifdef X86GFX
sc.Registered = TRUE;
/* stateLength can be 0 if fullscreen is disabled in the console */
if(stateLength)
RtlZeroMemory(videoState, sizeof(VIDEO_HARDWARE_STATE_HEADER));
#else
/*
** Create graphics buffer if we need one. Tim Oct 92.
*/
if( sc.ModeType==GRAPHICS )
graphicsResize();
#endif
/*
** Tim September 92.
** If window size is not suitable for a DOS app, snap-to-fit
** appropriately. Put cursor in correct place.
** Do the ConsoleInit() and nt_init_event_thread() type of things.
** Leave full-screen as it was.
*/
if (sc.ScreenState != WINDOWED) {
/* Get console info, including the current cursor position. */
if (!GetConsoleScreenBufferInfo(sc.OutputHandle, &ConsBufferInfo))
ErrorExit();
/* Hard-wired for f-s resume - needs to be set properly. */
height = 8;
/* Set up BIOS variables etc. */
setVDMCursorPosition( (UTINY)height,
&ConsBufferInfo.dwCursorPosition);
/* Copy the console buffer to the regen buffer. */
copyConsoleToRegen(0, 0, VGA_WIDTH, (SHORT)ConVGAHeight);
}
/*
** Get console window size and set up our stuff accordingly.
*/
calcScreenParams( &height, &vgaHeight );
/*
** Window resize code copied out of nt_graph.c:textResize().
*/
{
resizeWindow( 80, vgaHeight );
}
/* Copy the console buffer to the regen buffer. */
copyConsoleToRegen(0, 0, VGA_WIDTH, vgaHeight);
/*
** Make sure cursor is not below bottom line.
*/
if( ConsBufferInfo.dwCursorPosition.Y >= vgaHeight ){
ConsBufferInfo.dwCursorPosition.Y = vgaHeight-1;
}
setVDMCursorPosition(( UTINY)height, &ConsBufferInfo.dwCursorPosition);
} /* end of DoFullScreenResume() */
/***************************************************************************
* Function: *
* GfxCloseDown *
* *
* Description: *
* Hook from host_terminate to ensure section closed so can then start*
* more VDMs. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID (Errors handled internally in CloseSection) *
* *
***************************************************************************/
GLOBAL VOID GfxCloseDown(VOID)
{
/* Text and Video sections previously closed here... */
}
#ifdef X86GFX
/***************************************************************************
* Function: *
* FreezeWinTitle *
* *
* Description: *
* Adds -FROZEN to the relevant console window title *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID FreezeWinTitle(VOID)
{
CHAR title[MAX_TITLE_LEN],*ptr;
SHORT max;
ULONG len;
if (WinFrozen)
return;
//
// The buffer contains the string plus the terminating null.
// So keep the string length less the null in len.
// Console can fail this call with silly error codes in low memory cases
// or if original title contains dubious chars.
//
len = strlen(szFrozenString);
max = (SHORT) (MAX_TITLE_LEN - len);
if (!GetConsoleTitle(title, max))
title[0] = '\0';
//
// Remove any trailing spaces or tabs from the title string
//
if(len = strlen(title))
{
ptr = title + len - 1;
while(*ptr == ' ' || *ptr == '\t')
*ptr-- = '\0';
}
//
// Add " - FROZEN" or the international equivalent to
// the end of the title string.
//
strcat(title, szFrozenString);
if (!SetConsoleTitle(title))
ErrorExit();
WinFrozen = TRUE;
}
/***************************************************************************
* Function: *
* UnFreezeWinTitle *
* *
* Description: *
* Removes -FROZEN from the relevant console window title *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID UnFreezeWinTitle(VOID)
{
CHAR title[MAX_TITLE_LEN];
ULONG len,orglen;
if (! WinFrozen)
return;
if (!GetConsoleTitle(title, MAX_TITLE_LEN))
ErrorExit();
//
// The buffer contains the string plus the terminating null.
// So keep the string length less the null in len.
//
len = strlen(szFrozenString);
orglen = strlen(title);
title[orglen - len] = '\0';
if (!SetConsoleTitle(title))
ErrorExit();
WinFrozen = FALSE;
//
// Now that we're thawing, put the mouse menu item
// back into the system menu.
// Andy!
MouseAttachMenuItem(sc.ActiveOutputBufferHandle);
}
#endif
/*
* ==========================================================================
* Local Functions
* ==========================================================================
*/
/***************************************************************************
* Function: *
* enableUpdates *
* *
* Description: *
* Restarts the reflection of regen buffer updates to paint routines. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
VOID enableUpdates(VOID)
{
enable_gfx_update_routines();
ConsoleNoUpdates = FALSE;
}
/***************************************************************************
* Function: *
* disableUpdates *
* *
* Description: *
* Stops changes to the regen buffer being reflected to paint *
* routines. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
VOID disableUpdates(VOID)
{
disable_gfx_update_routines();
ConsoleNoUpdates = TRUE;
}
/***************************************************************************
* Function: *
* copyConsoleToRegen *
* *
* Description: *
* Copies the contents of the console buffer to the video regen *
* buffer. *
* *
* Parameters: *
* startCol - start column of console buffer *
* startLine - start line of console buffer *
* width - width of console buffer *
* height - height of console buffer *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
VOID copyConsoleToRegen(SHORT startCol, SHORT startLine, SHORT width,
SHORT height)
{
CHAR_INFO *from;
COORD bufSize,
bufCoord;
LONG nChars;
SMALL_RECT readRegion;
register half_word *to;
#ifdef X86GFX
half_word misc;
register half_word *vc;
#endif
/* Allocate the buffer to get the console data into */
nChars = width * height;
assert0(nChars <= MAX_CONSOLE_SIZE, "Console buffer overflow");
/* Get the console data. */
bufSize.X = width;
bufSize.Y = height;
bufCoord.X = 0;
bufCoord.Y = 0;
readRegion.Left = startCol;
readRegion.Top = startLine;
readRegion.Right = startCol + width - (SHORT) 1;
readRegion.Bottom = startLine + height - (SHORT) 1;
if (!ReadConsoleOutput(sc.OutputHandle,
consoleBuffer,
bufSize,
bufCoord,
&readRegion))
ErrorExit();
/* Copy the console data to the regen buffer. */
from = consoleBuffer;
#ifndef X86GFX // on MIPS we actually want to write to the VGA bitplanes.
to = EGA_planes;
while(nChars--)
{
*to++ = from->Char.AsciiChar;
*to = (half_word) from->Attributes;
from++;
to += 3; // skipping interleaved font planes.
}
host_mark_screen_refresh();
#else
/*
* In V86 mode PC memory area is mapped to the bottom 1M of virtual memory,
* so the following is legal.
*/
vga_misc_inb(0x3cc, &misc);
if (misc & 1) // may be mono mode
to = (half_word *) CGA_REGEN_START;
else
to = (half_word *) MDA_REGEN_START;
vc = (half_word *) video_copy;
while (nChars--)
{
*to++ = *vc++ = from->Char.AsciiChar;
*to++ = *vc++ = (half_word) from->Attributes;
from++;
}
#endif
}
/***************************************************************************
* Function: *
* getVDMCursorPosition *
* *
* Description: *
* Gets the cursor position from BIOS variables and tells the console *
* where to place its cursor. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
VOID getVDMCursorPosition(VOID)
{
half_word currentPage;
word cursorWord;
COORD cursorPos;
BOOL setok;
/* Get the current video page. */
currentPage = sas_hw_at_no_check(vd_current_page);
/* Store cursor position in BIOS variables. */
cursorWord = sas_w_at_no_check(VID_CURPOS + (currentPage * 2));
/* Set the console cursor. */
cursorPos.X = (SHORT) (cursorWord & 0xff);
cursorPos.Y = (cursorWord >> 8) & (SHORT) 0xff;
if ((sc.CharHeight * cursorPos.Y) > sc.PC_W_Height)
cursorPos.Y = (sc.PC_W_Height / sc.CharHeight) - 1;
if( !stdoutRedirected ) {
setok = SetConsoleCursorPosition(sc.OutputHandle, cursorPos);
if (!setok) {
if (GetLastError() != ERROR_INVALID_HANDLE) // ie. output redirected
ErrorExit();
}
}
}
/***************************************************************************
* Function: *
* setVDMCursorPosition *
* *
* Description: *
* Positions SoftPC's cursor, setting the relevant BIOS variables. *
* *
* Parameters: *
* height - the current character height *
* cursorPos - the coordinates of the cursor *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
VOID setVDMCursorPosition(UTINY height, PCOORD cursorPos)
{
CONSOLE_CURSOR_INFO cursorInfo;
ULONG port6845,
cursorStart,
cursorEnd,
colsOnScreen,
videoLen,
pageOffset,
cursorWord;
UTINY currentPage;
/* Get cursor size. */
if(!GetConsoleCursorInfo(sc.OutputHandle, &cursorInfo))
ErrorExit();
/* Work out cursor start and end pixels. */
cursorStart = height - (height * cursorInfo.dwSize / 100);
if (cursorStart == height)
cursorStart--;
cursorEnd = height - 1;
if (sc.ScreenState == WINDOWED)
{
/* Pass cursor size to video ports. */
port6845 = sas_w_at_no_check(VID_INDEX);
outb((io_addr) port6845, R10_CURS_START);
outb((io_addr) (port6845 + 1), (half_word) cursorStart);
outb((io_addr) port6845, R11_CURS_END);
outb((io_addr) (port6845 + 1), (half_word) cursorEnd);
}
/* Get the current video page. */
currentPage = sas_hw_at_no_check(vd_current_page);
/* Set BIOS variables. */
sas_storew_no_check(VID_CURMOD,
(word) ((cursorStart << 8) | (cursorEnd & 0xff)));
/* Work out cursor position. */
colsOnScreen = sas_w_at_no_check(VID_COLS);
videoLen = sas_w_at_no_check(VID_LEN);
pageOffset = cursorPos->Y * colsOnScreen * 2 + (cursorPos->X << 1);
cursorWord = (currentPage * videoLen + pageOffset) / 2;
if (sc.ScreenState == WINDOWED)
{
/* Send cursor position to video ports. */
outb((io_addr) port6845, R14_CURS_ADDRH);
outb((io_addr) (port6845 + 1), (half_word) (cursorWord >> 8));
outb((io_addr) port6845, R15_CURS_ADDRL);
outb((io_addr) (port6845 + 1), (half_word) (cursorWord & 0xff));
}
/* Store cursor position in BIOS variables. */
sas_storew_no_check(VID_CURPOS + (currentPage * 2),
(word) ((cursorPos->Y << 8) | (cursorPos->X & 0xff)));
if (sc.ScreenState == WINDOWED)
{
#ifdef MONITOR
resetNowCur(); /* reset static vars holding cursor pos. */
#endif
do_new_cursor(); /* make sure the emulation knows about it */
}
}
VOID waitForInputFocus()
{
if (WaitForSingleObject(sc.FocusEvent, INFINITE))
ErrorExit();
}
VOID AddTempIVTFixups()
{
/* BOP 17, IRET */
UTINY code[] = { 0xc4, 0xc4, 0x17, 0xcf };
//location is random but should be safe until DOS is initialised!!!
sas_stores(0x40000, code, sizeof(code)); // new Int 17 code
sas_storew(0x17*4, 0); // Int 17h offset
sas_storew((0x17*4) + 2, 0x4000); // Int 17h segment
}
/***************************************************************************
* Function: *
* getModeType *
* *
* Description: *
* Look up video mode to determine whether the VGA current mode is *
* graphics or text. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* int - TEXT or GRAPHICS. *
* *
***************************************************************************/
int getModeType(VOID)
{
half_word mode;
int modeType;
mode = sas_hw_at_no_check(vd_video_mode);
switch(mode)
{
case 0:
case 1:
case 2:
case 3:
case 7:
case 0x20:
case 0x40:
case 0x41:
case 0x42:
case 0x43:
case 0x44:
case 0x45:
modeType = TEXT;
break;
default:
modeType = GRAPHICS;
break;
}
return(modeType);
}
#ifdef X86GFX
/***************************************************************************
* Function: *
* host_check_mouse_buffer *
* *
* Description: *
* Called when an INT 10h, AH = 11h is being executed, this function *
* checks to see if the number of lines on the screen for a text mode *
* has changed and if so selects a new mouse buffer. *
* *
* Parameters: *
* None. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID host_check_mouse_buffer(VOID)
{
half_word mode,
sub_func,
font_height,
text_lines;
IU16 scan_lines;
/* Get the current video mode. */
mode = sas_hw_at_no_check(vd_video_mode);
#ifdef V7VGA
if (mode > 0x13)
mode += 0x4c;
else if ((mode == 1) && (extensions_controller.foreground_latch_1))
mode = extensions_controller.foreground_latch_1;
#endif /* V7VGA */
/*
* Check to see if we are in a text mode whose mouse virtual coordinates
* are affected by the number of lines on the screen.
*/
if ((mode == 0x2) || (mode == 0x3) || (mode == 0x7))
{
/* Work out the font height being set. */
sub_func = getAL();
switch (sub_func)
{
case 0x10:
font_height = getBH();
break;
case 0x11:
font_height = 14;
break;
case 0x12:
font_height = 8;
break;
case 0x14:
font_height = 16;
break;
default:
/*
* The above are the only functions that re-program the no. of lines
* on the screen, so do nothing if we have something else.
*/
return;
}
/* Get the number of scan lines for this mode. */
if(!(get_EGA_switches() & 1) && (mode < 4))
{
scan_lines = 200; /* Low res text mode */
}
else
{
switch (get_VGA_lines())
{
case S200:
scan_lines = 200;
break;
case S350:
scan_lines = 350;
break;
case S400:
scan_lines = 400;
break;
default:
/* Dodgy value in BIOS data area - don't do anything. */
assert0(NO, "invalid VGA lines in BIOS data");
return;
}
}
/* Now work out the number of text lines on the screen. */
text_lines = scan_lines / font_height;
/* If the number of lines has changed, select a new mouse buffer. */
if (text_lines != saved_text_lines)
SelectMouseBuffer(mode, text_lines);
} /* if ((mode == 0x2) || (mode == 0x3) || (mode == 0x7)) */
}
/***************************************************************************
* Function: *
* SelectMouseBuffer *
* *
* Description: *
* Selects the correct screen ratio for the video mode.at the *
* *
* Parameters: *
* mode - the video mode for which we are setting a screen buffer. *
* lines - for text modes: the number of character lines on the *
* screen, 0 denotes the default for this mode. *
* *
* Return value: *
* VOID *
* *
***************************************************************************/
GLOBAL VOID SelectMouseBuffer(half_word mode, half_word lines)
{
DWORD width,
height;
/*
** When stdout is being redirected we must not set up the graphics
** buffer for the mouse. Otherwise 32-bit progs like MORE crash
** cos they ask console for the active console handle and get
** confused. We get told by DOS Em. when stdout is being
** redirected and do not set up the buffer.
** Tim Jan 93.
*/
if( stdoutRedirected )
return;
/* Work out the screen resolution. */
switch (mode & 0x7f)
{
case 0x0:
case 0x1:
width = 640;
height = 200;
break;
case 0x2:
case 0x3:
case 0x7:
switch (lines)
{
case 0:
case 25:
saved_text_lines = 25;
width = 640;
height = 200;
break;
case 43:
saved_text_lines = 43;
width = 640;
height = 344;
break;
case 50:
saved_text_lines = 50;
width = 640;
height = 400;
break;
default:
assert1(NO, "strange number of lines for text mode - %d", lines);
return;
}
break;
case 0x4:
case 0x5:
case 0x6:
case 0xd:
case 0xe:
width = 640;
height = 200;
break;
case 0xf:
case 0x10:
width = 640;
height = 350;
break;
case 0x11:
case 0x12:
width = 640;
height = 480;
break;
case 0x13:
width = 640;
height = 200;
break;
case 0x40:
width = 640;
height = 400;
break;
case 0x41:
case 0x42:
width = 1056;
height = 344;
break;
case 0x43:
width = 640;
height = 480;
break;
case 0x44:
width = 800;
height = 480;
break;
case 0x45:
width = 1056;
height = 392;
break;
case 0x60:
width = 752;
height = 408;
break;
case 0x61:
width = 720;
height = 536;
break;
case 0x62:
width = 800;
height = 600;
break;
case 0x63:
case 0x64:
case 0x65:
width = 1024;
height = 768;
break;
case 0x66:
width = 640;
height = 400;
break;
case 0x67:
width = 640;
height = 480;
break;
case 0x68:
width = 720;
height = 540;
break;
case 0x69:
width = 800;
height = 600;
break;
default:
/* No change if we get an unknown mode. */
assert1(NO, "unknown mode - %d", mode);
return;
}
//
// Set the variables to let apps like Word and Works which call
// INT 33h AX = 26h to find out the size of the current virtual
// screen.
// Andy!
VirtualX = (word)width;
VirtualY = (word)height;
/* Save current dimensions. */
mouse_buffer_width = width;
mouse_buffer_height = height;
}
#endif /* X86GFX */
void host_enable_stream_io(void)
{
sc.ScreenState = STREAM_IO;
host_stream_io_enabled = TRUE;
}
void host_disable_stream_io(void)
{
DWORD mode;
if(!GetConsoleMode(sc.InputHandle, &mode))
DisplayErrorTerm(EHS_FUNC_FAILED,GetLastError(),__FILE__,__LINE__);
mode |= (ENABLE_WINDOW_INPUT | ENABLE_MOUSE_INPUT);
if(!SetConsoleMode(sc.InputHandle,mode))
DisplayErrorTerm(EHS_FUNC_FAILED,GetLastError(), __FILE__,__LINE__);
if(!GetConsoleMode(sc.OutputHandle, &mode))
DisplayErrorTerm(EHS_FUNC_FAILED,GetLastError(),__FILE__,__LINE__);
if(!stdoutRedirected)
{
mode &= ~(ENABLE_WRAP_AT_EOL_OUTPUT | ENABLE_PROCESSED_OUTPUT);
if(!SetConsoleMode(sc.OutputHandle,mode))
DisplayErrorTerm(EHS_FUNC_FAILED,GetLastError(), __FILE__,__LINE__);
}
ConsoleInit();
(void)(*choose_display_mode)();
/*
** Copy the console buffer to the regen buffer.
** Don't want to adjust the copy from top of console window, console
** does it itself if we resize the window. Tim September 92.
*/
copyConsoleToRegen(0, 0, VGA_WIDTH, (SHORT)ConVGAHeight);
/*
** Tim September 92, adjust cursor position if console window size is
** adjusted.
*/
ConsBufferInfo.dwCursorPosition.Y -= ConTopLine;
/* Set up SoftPC's cursor. */
setVDMCursorPosition((UTINY)StartupCharHeight,
&ConsBufferInfo.dwCursorPosition);
if (sc.ScreenState == WINDOWED)
enableUpdates();
MouseAttachMenuItem(sc.ActiveOutputBufferHandle);
host_stream_io_enabled = FALSE;
}
