diff options
Diffstat (limited to 'private/unimodem/inf/mdmsecdy.inx')
| -rw-r--r-- | private/unimodem/inf/mdmsecdy.inx | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/private/unimodem/inf/mdmsecdy.inx b/private/unimodem/inf/mdmsecdy.inx new file mode 100644 index 000000000..5dc9a1216 --- /dev/null +++ b/private/unimodem/inf/mdmsecdy.inx @@ -0,0 +1,142 @@ +; Windows Modem Setup File +; Copyright (c) 1993-1996 Microsoft Corporation +; Manufacturer: Security Dunamics +; Supports AT&T Comsphere and others +; +; Security Dynamics devices are inserted between an external modem and the +; PC. They can be treated as the external modem with the following restrictions: +; 1. The DCE<->DTE rate and Connection rate are locked at 19200 +; 2. The connect response from the modem is eaten up by the device. This is +; a big nuisance and RAS worked around it by hardcoding responses +; corresponding to the packets from known protocols. +; 2. Compression should be disabled. +; +;[SD ACM400 w/ AT&T 3820] +; +;This entry uses the Security Dynamics ACM/400 with the +;AT&T Comsphere 3820 modem. - done +; two devices - done +;The macro definitions, <xxx_xx>=, and COMMAND_INIT= lines must be +;changed in order to use other modems with the ACM/400. +;Set ACM/400 ports to fixed 19200 bps (not autobaud). +;Do not use Destination IDs with ACM/400 accounts. + + + +;------------------------- + +[Version] +Signature="$CHICAGO$" +Class=Modem +ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318} +Provider=%SecurityDynamics% + + +[Manufacturer] +%SecurityDynamics% = SecurityDynamics + + +[SecurityDynamics] +%SecurityDynamics1% = SecurityDynamics1, SecDy_SD1 + + +; Installation sections + +[SecurityDynamics1] +AddReg=All, Common, SecurityDynamics1.AddReg, att_responses, EXTERNAL + +;AddReg sections + +[SecurityDynamics1.AddReg] +; uses comsphere 3820 +HKR,, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 07,00,00,00, 37,03,00,00, 00,4b,00,00, 40,38,00,00 +HKR, Settings, ErrorControl_On,, "\N5" +HKR, Settings, ErrorControl_Forced,, "\N4" + +[Strings] +SecurityDynamics ="Security Dynamics" +SecurityDynamics1 ="Security Dynamics with AT&T 3820" + +[All] +HKR,,FriendlyDriver,,unimodem.vxd +HKR,,DevLoader,,*vcomm +HKR,,PortSubClass,1,02 +HKR,,ConfigDialog,,modemui.dll +HKR,,EnumPropPages,,"modemui.dll,EnumPropPages" +HKR, Init, 1,, "AT<cr>" +HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 + +[EXTERNAL] +HKR,, DeviceType, 1, 01 + +[Common] +; uses comsphere 3820 +HKR,, InactivityScale, 1, 3c,00,00,00 +; original comsphere from Win95 +; HKR, Init, 2,, "AT &F S0=0 &D2 E0 V1<cr>" + HKR, Init, 2,, "AT&F&C1&D2 V1 X7 S0=0 S2=128 S7=55<cr>" +HKR, Monitor, 1,, "ATS0=1<cr>" +HKR, Monitor, 2,, "None" +HKR, Hangup, 1,, "ATH<cr>" +HKR, Answer, 1,, "None" +HKR,, Reset,, "AT&F<cr>" +HKR, Settings, Prefix,, "AT" +HKR, Settings, Terminator,, "<cr>" +HKR, Settings, DialPrefix,, "D" +HKR, Settings, DialSuffix,, "" ; disabled +HKR, Settings, SpeakerVolume_Low,, "L0" +HKR, Settings, SpeakerVolume_Med,, "L2" +HKR, Settings, SpeakerVolume_High,, "L3" +HKR, Settings, SpeakerMode_Off,, "M0" +HKR, Settings, SpeakerMode_Dial,, "M1" +HKR, Settings, SpeakerMode_On,, "M2" +HKR, Settings, FlowControl_Off,, "\Q0" +HKR, Settings, FlowControl_Hard,, "\Q3" +HKR, Settings, FlowControl_Soft,, "\Q1" +HKR, Settings, ErrorControl_On,, "\N7" +HKR, Settings, ErrorControl_Off,, "\N1" +HKR, Settings, ErrorControl_Forced,, "\N6" +HKR, Settings, Compression_On,, "%%C1""H3" +HKR, Settings, Compression_Off,, "%%C0""H0" +HKR, Settings, Modulation_CCITT,, "B0 " +HKR, Settings, Modulation_Bell,, "B1 " +HKR, Settings, Pulse,, "P" +HKR, Settings, Tone,, "T" +HKR, Settings, Blind_Off,, "X4" +HKR, Settings, Blind_On,, "X3" +HKR, Settings, CallSetupFailTimer,, "S7=<#>" +HKR, Settings, InactivityTimeout,, "\T<#>" +HKR,, DCB, 1, 1C,00,00,00, 00,4B,00,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 + +[att_responses] +HKR, Responses, "<cr>", 1, 01, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00 + +HKR, Responses, "OK", 1, 00, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "RING", 1, 08, 00, 00,00,00,00, 00,00,00,00 +; We consider <hff> to be a ring response +HKR, Responses, "<hff>", 1, 08, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "NO CARRIER", 1, 04, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "ERROR", 1, 03, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "NO DIALTONE", 1, 05, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "NO DIAL TONE",1, 05, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "BUSY", 1, 06, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "NO ANSWER", 1, 07, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "FAX", 1, 03, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "DATA", 1, 03, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "VOICE", 1, 03, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "RINGING", 1, 01, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "DELAYED", 1, 03, 00, 00,00,00,00, 00,00,00,00 +HKR, Responses, "+FCERROR", 1, 03, 00, 00,00,00,00, 00,00,00,00 +; we consider DIALIN to be a ring response +HKR, Responses, "DIALIN", 1, 08, 00, 00,00,00,00, 00,00,00,00 +; we consider <h00> to be informational +HKR, Responses, "<h00>", 1, 01, 00, 00,00,00,00, 00,00,00,00 |