// Copyright 2014 Citra Emulator Project
// Licensed under GPLv2 or any later version
// Refer to the license.txt file included.
#include "common/common_types.h"
#include "core/arm/arm_interface.h"
#include "core/settings.h"
#include "core/core.h"
#include "core/mem_map.h"
#include "core/core_timing.h"
#include "core/hle/hle.h"
#include "core/hle/service/gsp_gpu.h"
#include "core/hle/service/dsp_dsp.h"
#include "core/hw/gpu.h"
#include "video_core/command_processor.h"
#include "video_core/video_core.h"
namespace GPU {
Regs g_regs;
/// True if the current frame was skipped
bool g_skip_frame = false;
/// 268MHz / gpu_refresh_rate frames per second
static u64 frame_ticks;
/// Event id for CoreTiming
static int vblank_event;
/// Total number of frames drawn
static u64 frame_count;
/// True if the last frame was skipped
static bool last_skip_frame = false;
template <typename T>
inline void Read(T &var, const u32 raw_addr) {
u32 addr = raw_addr - 0x1EF00000;
u32 index = addr / 4;
// Reads other than u32 are untested, so I'd rather have them abort than silently fail
if (index >= Regs::NumIds() || !std::is_same<T, u32>::value) {
LOG_ERROR(HW_GPU, "unknown Read%lu @ 0x%08X", sizeof(var) * 8, addr);
return;
}
var = g_regs[addr / 4];
}
template <typename T>
inline void Write(u32 addr, const T data) {
addr -= 0x1EF00000;
u32 index = addr / 4;
// Writes other than u32 are untested, so I'd rather have them abort than silently fail
if (index >= Regs::NumIds() || !std::is_same<T, u32>::value) {
LOG_ERROR(HW_GPU, "unknown Write%lu 0x%08X @ 0x%08X", sizeof(data) * 8, (u32)data, addr);
return;
}
g_regs[index] = static_cast<u32>(data);
switch (index) {
// Memory fills are triggered once the fill value is written.
case GPU_REG_INDEX_WORKAROUND(memory_fill_config[0].trigger, 0x00004 + 0x3):
case GPU_REG_INDEX_WORKAROUND(memory_fill_config[1].trigger, 0x00008 + 0x3):
{
const bool is_second_filler = (index != GPU_REG_INDEX(memory_fill_config[0].trigger));
auto& config = g_regs.memory_fill_config[is_second_filler];
if (config.address_start && config.trigger) {
u8* start = Memory::GetPointer(Memory::PhysicalToVirtualAddress(config.GetStartAddress()));
u8* end = Memory::GetPointer(Memory::PhysicalToVirtualAddress(config.GetEndAddress()));
if (config.fill_24bit) {
// fill with 24-bit values
for (u8* ptr = start; ptr < end; ptr += 3) {
ptr[0] = config.value_24bit_b;
ptr[1] = config.value_24bit_g;
ptr[2] = config.value_24bit_r;
}
} else if (config.fill_32bit) {
// fill with 32-bit values
for (u32* ptr = (u32*)start; ptr < (u32*)end; ++ptr)
*ptr = config.value_32bit;
} else {
// fill with 16-bit values
for (u16* ptr = (u16*)start; ptr < (u16*)end; ++ptr)
*ptr = config.value_16bit;
}
LOG_TRACE(HW_GPU, "MemoryFill from 0x%08x to 0x%08x", config.GetStartAddress(), config.GetEndAddress());
config.trigger = 0;
config.finished = 1;
if (!is_second_filler) {
GSP_GPU::SignalInterrupt(GSP_GPU::InterruptId::PSC0);
} else {
GSP_GPU::SignalInterrupt(GSP_GPU::InterruptId::PSC1);
}
}
break;
}
case GPU_REG_INDEX(display_transfer_config.trigger):
{
const auto& config = g_regs.display_transfer_config;
if (config.trigger & 1) {
u8* source_pointer = Memory::GetPointer(Memory::PhysicalToVirtualAddress(config.GetPhysicalInputAddress()));
u8* dest_pointer = Memory::GetPointer(Memory::PhysicalToVirtualAddress(config.GetPhysicalOutputAddress()));
// Cheap emulation of horizontal scaling: Just skip each second pixel of the
// input framebuffer. We keep track of this in the pixel_skip variable.
unsigned pixel_skip = (config.scale_horizontally != 0) ? 2 : 1;
u32 output_width = config.output_width / pixel_skip;
for (u32 y = 0; y < config.output_height; ++y) {
// TODO: Why does the register seem to hold twice the framebuffer width?
for (u32 x = 0; x < output_width; ++x) {
struct {
int r, g, b, a;
} source_color = { 0, 0, 0, 0 };
switch (config.input_format) {
case Regs::PixelFormat::RGBA8:
{
// TODO: Most likely got the component order messed up.
u8* srcptr = source_pointer + (x * pixel_skip + y * config.input_width) * 4;
source_color.r = srcptr[0]; // blue
source_color.g = srcptr[1]; // green
source_color.b = srcptr[2]; // red
source_color.a = srcptr[3]; // alpha
break;
}
default:
LOG_ERROR(HW_GPU, "Unknown source framebuffer format %x", config.input_format.Value());
break;
}
switch (config.output_format) {
/*case Regs::PixelFormat::RGBA8:
{
// TODO: Untested
u8* dstptr = (u32*)(dest_pointer + x * 4 + y * config.output_width * 4);
dstptr[0] = source_color.r;
dstptr[1] = source_color.g;
dstptr[2] = source_color.b;
dstptr[3] = source_color.a;
break;
}*/
case Regs::PixelFormat::RGB8:
{
// TODO: Most likely got the component order messed up.
u8* dstptr = dest_pointer + (x + y * output_width) * 3;
dstptr[0] = source_color.r; // blue
dstptr[1] = source_color.g; // green
dstptr[2] = source_color.b; // red
break;
}
default:
LOG_ERROR(HW_GPU, "Unknown destination framebuffer format %x", config.output_format.Value());
break;
}
}
}
LOG_TRACE(HW_GPU, "DisplayTriggerTransfer: 0x%08x bytes from 0x%08x(%ux%u)-> 0x%08x(%ux%u), dst format %x",
config.output_height * output_width * 4,
config.GetPhysicalInputAddress(), (u32)config.input_width, (u32)config.input_height,
config.GetPhysicalOutputAddress(), (u32)output_width, (u32)config.output_height,
config.output_format.Value());
GSP_GPU::SignalInterrupt(GSP_GPU::InterruptId::PPF);
}
break;
}
// Seems like writing to this register triggers processing
case GPU_REG_INDEX(command_processor_config.trigger):
{
const auto& config = g_regs.command_processor_config;
if (config.trigger & 1)
{
u32* buffer = (u32*)Memory::GetPointer(Memory::PhysicalToVirtualAddress(config.GetPhysicalAddress()));
Pica::CommandProcessor::ProcessCommandList(buffer, config.size);
}
break;
}
default:
break;
}
}
// Explicitly instantiate template functions because we aren't defining this in the header:
template void Read<u64>(u64 &var, const u32 addr);
template void Read<u32>(u32 &var, const u32 addr);
template void Read<u16>(u16 &var, const u32 addr);
template void Read<u8>(u8 &var, const u32 addr);
template void Write<u64>(u32 addr, const u64 data);
template void Write<u32>(u32 addr, const u32 data);
template void Write<u16>(u32 addr, const u16 data);
template void Write<u8>(u32 addr, const u8 data);
/// Update hardware
static void VBlankCallback(u64 userdata, int cycles_late) {
frame_count++;
last_skip_frame = g_skip_frame;
g_skip_frame = (frame_count & Settings::values.frame_skip) != 0;
// Swap buffers based on the frameskip mode, which is a little bit tricky. When
// a frame is being skipped, nothing is being rendered to the internal framebuffer(s).
// So, we should only swap frames if the last frame was rendered. The rules are:
// - If frameskip == 0 (disabled), always swap buffers
// - If frameskip == 1, swap buffers every other frame (starting from the first frame)
// - If frameskip > 1, swap buffers every frameskip^n frames (starting from the second frame)
if ((((Settings::values.frame_skip != 1) ^ last_skip_frame) && last_skip_frame != g_skip_frame) ||
Settings::values.frame_skip == 0) {
VideoCore::g_renderer->SwapBuffers();
}
// Signal to GSP that GPU interrupt has occurred
// TODO(yuriks): hwtest to determine if PDC0 is for the Top screen and PDC1 for the Sub
// screen, or if both use the same interrupts and these two instead determine the
// beginning and end of the VBlank period. If needed, split the interrupt firing into
// two different intervals.
GSP_GPU::SignalInterrupt(GSP_GPU::InterruptId::PDC0);
GSP_GPU::SignalInterrupt(GSP_GPU::InterruptId::PDC1);
// TODO(bunnei): Fake a DSP interrupt on each frame. This does not belong here, but
// until we can emulate DSP interrupts, this is probably the only reasonable place to do
// this. Certain games expect this to be periodically signaled.
DSP_DSP::SignalInterrupt();
// Reschedule recurrent event
CoreTiming::ScheduleEvent(frame_ticks - cycles_late, vblank_event);
}
/// Initialize hardware
void Init() {
auto& framebuffer_top = g_regs.framebuffer_config[0];
auto& framebuffer_sub = g_regs.framebuffer_config[1];
// Setup default framebuffer addresses (located in VRAM)
// .. or at least these are the ones used by system applets.
// There's probably a smarter way to come up with addresses
// like this which does not require hardcoding.
framebuffer_top.address_left1 = 0x181E6000;
framebuffer_top.address_left2 = 0x1822C800;
framebuffer_top.address_right1 = 0x18273000;
framebuffer_top.address_right2 = 0x182B9800;
framebuffer_sub.address_left1 = 0x1848F000;
framebuffer_sub.address_left2 = 0x184C7800;
//framebuffer_sub.address_right1 = unknown;
//framebuffer_sub.address_right2 = unknown;
framebuffer_top.width = 240;
framebuffer_top.height = 400;
framebuffer_top.stride = 3 * 240;
framebuffer_top.color_format = Regs::PixelFormat::RGB8;
framebuffer_top.active_fb = 0;
framebuffer_sub.width = 240;
framebuffer_sub.height = 320;
framebuffer_sub.stride = 3 * 240;
framebuffer_sub.color_format = Regs::PixelFormat::RGB8;
framebuffer_sub.active_fb = 0;
frame_ticks = 268123480 / Settings::values.gpu_refresh_rate;
last_skip_frame = false;
g_skip_frame = false;
vblank_event = CoreTiming::RegisterEvent("GPU::VBlankCallback", VBlankCallback);
CoreTiming::ScheduleEvent(frame_ticks, vblank_event);
LOG_DEBUG(HW_GPU, "initialized OK");
}
/// Shutdown hardware
void Shutdown() {
LOG_DEBUG(HW_GPU, "shutdown OK");
}
} // namespace
